NetBSD/sys/arch/arm32/shark/fiq.S

152 lines
4.5 KiB
ArmAsm

/* $NetBSD: fiq.S,v 1.3 1999/10/26 06:53:44 cgd Exp $ */
/*
* Copyright 1997
* Digital Equipment Corporation. All rights reserved.
*
* This software is furnished under license and may be used and
* copied only in accordance with the following terms and conditions.
* Subject to these conditions, you may download, copy, install,
* use, modify and distribute this software in source and/or binary
* form. No title or ownership is transferred hereby.
*
* 1) Any source code used, modified or distributed must reproduce
* and retain this copyright notice and list of conditions as
* they appear in the source file.
*
* 2) No right is granted to use any trade name, trademark, or logo of
* Digital Equipment Corporation. Neither the "Digital Equipment
* Corporation" name nor any trademark or logo of Digital Equipment
* Corporation may be used to endorse or promote products derived
* from this software without the prior written permission of
* Digital Equipment Corporation.
*
* 3) This software is provided "AS-IS" and any express or implied
* warranties, including but not limited to, any implied warranties
* of merchantability, fitness for a particular purpose, or
* non-infringement are disclaimed. In no event shall DIGITAL be
* liable for any damages whatsoever, and in particular, DIGITAL
* shall not be liable for special, indirect, consequential, or
* incidental damages or damages for lost profits, loss of
* revenue or loss of use, whether such damages arise in contract,
* negligence, tort, under statute, in equity, at law or otherwise,
* even if advised of the possibility of such damage.
*/
/*
* fiq.S
*
* Low level fiq handlers
*
* Created : 19/05/97
*/
#include <machine/asm.h>
#include <machine/cpu.h>
#include <arm32/shark/fiq.h>
#include <arm32/shark/sequoia.h>
sp .req r13
lr .req r14
pc .req r15
.text
/* this variable is used to detect when it is necessary to unwedge the
sequoia SMI/PMI edge detect logic. *sigh* */
Lfiqs_happened:
.word _C_LABEL(fiqs_happened)
Lsequoia_index_cache:
.word _C_LABEL(sequoia_index_cache)
.data
.global _C_LABEL(fiqs_happened)
_C_LABEL(fiqs_happened):
.word 0
.text
.global _C_LABEL(shark_fiq)
.global _C_LABEL(shark_fiq_end)
/*
* r8 - VAM_IO_DATA = address of IO space in virtual memory
* r9 - C routine to call (0 => no routine)
* r10 - argument (0 => pass PMI reason register)
* r11 - scratch
* r12 - scratch
* r13 - stack for C routine call
*/
_C_LABEL(shark_fiq):
/* clear the FIQ immediately */
/* do the FIQ/SMI clear here to avoid synchronization problems!
both the chip enable (caused by the ISA register read) and
the sequoia bit clear must be done. do it in that order so
the sequoia port accesses will clear the chip enable caused
by accessing FIQ_CLEAR_IOPORT
*/
/* set up to read/write the power management status register */
ldr r11, Lsequoia_index_cache
ldr r12, [r11]
/* see if the index is properly set. unfortunately, the common
case will probably be that the FIQ handler (e.g. smartcard)
talks to the sequoia, so the index will need to be set. */
cmp r12, #PMC_PMSR_REG
movne r12, #PMC_PMSR_REG
#ifdef STRH
strneh r12, [r8, #SEQUOIA_INDEX]
#else
.word 0x11c8c2b4
#endif
strne r12, [r11]
/* set SMIACT by changing the power management mode to sleep */
mov r12, #PMMD_SLEEP
#ifdef STRH
strh r12, [r8, #SEQUOIA_DATA]
#else
.word 0xe1c8c2b6
#endif
/* get the PMI reason register, if desired */
cmp r10, #0
#ifdef LDRH
ldreqh r10, [r8, #SEQUOIA_DATA]
#else
.word 0x01d8a2b6 /* ldrh r10, [r8, #0x26] */
#endif
/* simultaneously clear the PMI reason bits and clear SMIACT */
mov r12, #PMMD_ON
orr r12, r12, #PMSR_M_PMISRC
#ifdef STRH
strh r12, [r8, #SEQUOIA_DATA]
#else
.word 0xe1c8c2b6
#endif
ldr r12, Lfiqs_happened
ldr r11, [r12]
add r11, r11, #1
str r11, [r12]
cmp r9, #0
subeqs pc, lr, #4 /* no routine => return from trap */
/* assume that the C routine follows the ARM procedure call standard.
save only user registers and let the C code save the rest.
r0-r3, r12, r14 clobbered. other regs should be restored
by C code.
*/
stmfd sp!, {r0-r3, lr} /* save user registers */
mov r0, r10 /* pass the PMI reason register */
mov lr, pc /* call C routine */
mov pc, r9
ldmfd sp!, {r0-r3, lr} /* restore user registers */
subs pc, lr, #4 /* return from trap */
_C_LABEL(shark_fiq_end):
/* End of fiq.S */