269 lines
9.8 KiB
C
269 lines
9.8 KiB
C
/* $NetBSD: sa2400reg.h,v 1.7 2006/08/31 19:24:38 dyoung Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2005 David Young. All rights reserved.
|
|
*
|
|
* This code was written by David Young.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY David Young ``AS IS'' AND ANY
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David
|
|
* Young BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
|
|
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _DEV_IC_SA2400REG_H_
|
|
#define _DEV_IC_SA2400REG_H_
|
|
|
|
/*
|
|
* Serial bus format for Philips SA2400 Single-chip Transceiver.
|
|
*/
|
|
#define SA2400_TWI_DATA_MASK __BITS(31,8)
|
|
#define SA2400_TWI_WREN __BIT(7) /* enable write */
|
|
#define SA2400_TWI_ADDR_MASK __BITS(6,0)
|
|
|
|
/*
|
|
* Registers for Philips SA2400 Single-chip Transceiver.
|
|
*/
|
|
#define SA2400_SYNA 0 /* Synthesizer Register A */
|
|
#define SA2400_SYNA_FM __BIT(21) /* fractional modulus select,
|
|
* 0: /8 (default)
|
|
* 1: /5
|
|
*/
|
|
#define SA2400_SYNA_NF_MASK __BITS(20,18) /* fractional increment value,
|
|
* 0 to 7, default 4
|
|
*/
|
|
#define SA2400_SYNA_N_MASK __BITS(17,2) /* main divider division ratio,
|
|
* 512 to 65535, default 615
|
|
*/
|
|
|
|
#define SA2400_SYNB 1 /* Synthesizer Register B */
|
|
#define SA2400_SYNB_R_MASK __BITS(21,12) /* reference divider ratio,
|
|
* 4 to 1023, default 11
|
|
*/
|
|
#define SA2400_SYNB_L_MASK __BITS(11,10) /* lock detect mode */
|
|
#define SA2400_SYNB_L_INACTIVE0 __SHIFTIN(0, SA2400_SYNB_L_MASK)
|
|
#define SA2400_SYNB_L_INACTIVE1 __SHIFTIN(1, SA2400_SYNB_L_MASK)
|
|
#define SA2400_SYNB_L_NORMAL __SHIFTIN(2, SA2400_SYNB_L_MASK)
|
|
#define SA2400_SYNB_L_INACTIVE2 __SHIFTIN(3, SA2400_SYNB_L_MASK)
|
|
|
|
#define SA2400_SYNB_ON __BIT(9) /* power on/off,
|
|
* 0: inverted chip mode control
|
|
* 1: as defined by chip mode
|
|
* (see SA2400_OPMODE)
|
|
*/
|
|
#define SA2400_SYNB_ONE __BIT(8) /* always 1 */
|
|
#define SA2400_SYNB_FC_MASK __BITS(7,0) /* fractional compensation
|
|
* charge pump current DAC,
|
|
* 0 to 255, default 80.
|
|
*/
|
|
|
|
#define SA2400_SYNC 2 /* Synthesizer Register C */
|
|
#define SA2400_SYNC_CP_MASK __BITS(7,6) /* charge pump current
|
|
* setting
|
|
*/
|
|
#define SA2400_SYNC_CP_NORMAL_ __SHIFTIN(0, SA2400_SYNC_CP_MASK)
|
|
#define SA2400_SYNC_CP_THIRD_ __SHIFTIN(1, SA2400_SYNC_CP_MASK)
|
|
#define SA2400_SYNC_CP_NORMAL __SHIFTIN(2, SA2400_SYNC_CP_MASK) /* recommended */
|
|
#define SA2400_SYNC_CP_THIRD __SHIFTIN(3, SA2400_SYNC_CP_MASK)
|
|
|
|
#define SA2400_SYNC_SM_MASK __BITS(5,3) /* comparison divider select,
|
|
* 0 to 4, extra division
|
|
* ratio is 2**SM.
|
|
*/
|
|
#define SA2400_SYNC_ZERO __BIT(2) /* always 0 */
|
|
|
|
#define SA2400_SYND 3 /* Synthesizer Register D */
|
|
#define SA2400_SYND_ZERO1_MASK __BITS(21,17) /* always 0 */
|
|
#define SA2400_SYND_TPHPSU __BIT(16) /* T[phpsu], 1: disable
|
|
* PHP speedup pump,
|
|
* overrides SA2400_SYND_TSPU
|
|
*/
|
|
#define SA2400_SYND_TPSU __BIT(15) /* T[spu], 1: speedup on,
|
|
* 0: speedup off
|
|
*/
|
|
#define SA2400_SYND_ZERO2_MASK __BITS(14,3) /* always 0 */
|
|
|
|
#define SA2400_OPMODE 4 /* Operating mode, filter tuner,
|
|
* other controls
|
|
*/
|
|
/* 1: in Rx mode, RSSI-ADC always on 0: RSSI-ADC only on during AGC */
|
|
#define SA2400_OPMODE_ADC __BIT(19)
|
|
/* read-only filter tuner error: 1 if tuner out of range */
|
|
#define SA2400_OPMODE_FTERR __BIT(18)
|
|
/* Rx & Tx filter tuning, write tuning value (test mode only) or
|
|
* read tuner setting (in normal mode).
|
|
*/
|
|
#define SA2400_OPMODE_FILTTUNE_MASK __BITS(17,15)
|
|
|
|
/* external reference voltage (pad v2p5) on */
|
|
#define SA2400_OPMODE_V2P5 __BIT(14)
|
|
/* external reference current ... */
|
|
#define SA2400_OPMODE_I1M __BIT(13)
|
|
/* external reference current ... */
|
|
#define SA2400_OPMODE_I0P3 __BIT(12)
|
|
#define SA2400_OPMODE_IN22 __BIT(10) /* xtal input frequency,
|
|
* 0: 44 MHz
|
|
* 1: 22 MHz
|
|
*/
|
|
#define SA2400_OPMODE_CLK __BIT(9) /* reference clock output on */
|
|
#define SA2400_OPMODE_XO __BIT(8) /* xtal oscillator on */
|
|
#define SA2400_OPMODE_DIGIN __BIT(7) /* use digital Tx inputs
|
|
* (FIRDAC)
|
|
*/
|
|
#define SA2400_OPMODE_RXLV __BIT(6) /* Rx output common mode
|
|
* voltage,
|
|
* 0: V[DD]/2
|
|
* 1: 1.25V
|
|
*/
|
|
#define SA2400_OPMODE_VEO __BIT(5) /* make internal vco
|
|
* available at vco pads
|
|
* (vcoextout)
|
|
*/
|
|
#define SA2400_OPMODE_VEI __BIT(4) /* use external vco input
|
|
* (vcoextin)
|
|
*/
|
|
/* main operating mode */
|
|
#define SA2400_OPMODE_MODE_MASK __BITS(3,0)
|
|
#define SA2400_OPMODE_MODE_SLEEP __SHIFTIN(0, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_TXRX __SHIFTIN(1, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_WAIT __SHIFTIN(2, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_RXMGC __SHIFTIN(3, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_FCALIB __SHIFTIN(4, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_DCALIB __SHIFTIN(5, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_FASTTXRXMGC __SHIFTIN(6, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_RESET __SHIFTIN(7, SA2400_OPMODE_MODE_MASK)
|
|
#define SA2400_OPMODE_MODE_VCOCALIB __SHIFTIN(8, SA2400_OPMODE_MODE_MASK)
|
|
|
|
#define SA2400_OPMODE_DEFAULTS \
|
|
(SA2400_OPMODE_XO | SA2400_OPMODE_RXLV | SA2400_OPMODE_CLK | \
|
|
SA2400_OPMODE_I0P3 | __SHIFTIN(3, SA2400_OPMODE_FILTTUNE_MASK))
|
|
|
|
#define SA2400_AGC 5 /* AGC adjustment */
|
|
#define SA2400_AGC_TARGETSIGN __BIT(23) /* fine-tune AGC target:
|
|
* -7dB to 7dB, sign bit ... */
|
|
#define SA2400_AGC_TARGET_MASK __BITS(22,20) /* ... plus 0dB - 7dB */
|
|
#define SA2400_AGC_MAXGAIN_MASK __BITS(19,15) /* maximum AGC gain, 0 to 31,
|
|
* (yields 54dB to 85dB)
|
|
*/
|
|
/* write: settling time after baseband gain switching, units of
|
|
* 182 nanoseconds.
|
|
* read: output of RSSI/Tx-peak detector's ADC in 5-bit Gray code.
|
|
*/
|
|
#define SA2400_AGC_BBPDELAY_MASK __BITS(14,10)
|
|
#define SA2400_AGC_ADCVAL_MASK SA2400_AGC_BBPDELAY_MASK
|
|
|
|
/* write: settling time after LNA gain switching, units of
|
|
* 182 nanoseconds
|
|
* read: 2nd sample of RSSI in AGC cycle
|
|
*/
|
|
#define SA2400_AGC_LNADELAY_MASK __BITS(9,5)
|
|
#define SA2400_AGC_SAMPLE2_MASK SA2400_AGC_LNADELAY_MASK
|
|
|
|
/* write: time between turning on Rx and AGCSET, units of
|
|
* 182 nanoseconds
|
|
* read: 1st sample of RSSI in AGC cycle
|
|
*/
|
|
#define SA2400_AGC_RXONDELAY_MASK __BITS(4,0)
|
|
#define SA2400_AGC_SAMPLE1_MASK SA2400_AGC_RXONDELAY_MASK
|
|
|
|
#define SA2400_MANRX 6 /* Manual receiver control settings */
|
|
#define SA2400_MANRX_AHSN __BIT(23) /* 1: AGC w/ high S/N---switch
|
|
* LNA at step 52
|
|
* (recommended)
|
|
* 0: switch LNA at step 60
|
|
*/
|
|
|
|
/* If _RXOSQON, Q offset is
|
|
* (_RXOSQSIGN ? -1 : 1) * (1 + _RXOSQ_MASK) * 8 millivolts,
|
|
* otherwise, Q offset is 0.
|
|
*
|
|
* Ditto I offset.
|
|
*/
|
|
#define SA2400_MANRX_RXOSQON __BIT(22) /* Rx Q-channel correction. */
|
|
#define SA2400_MANRX_RXOSQSIGN __BIT(21)
|
|
#define SA2400_MANRX_RXOSQ_MASK __BITS(20,18)
|
|
|
|
#define SA2400_MANRX_RXOSION __BIT(17) /* Rx I-channel correction. */
|
|
#define SA2400_MANRX_RXOSISIGN __BIT(16)
|
|
#define SA2400_MANRX_RXOSI_MASK __BITS(15,13)
|
|
#define SA2400_MANRX_TEN __BIT(12) /* use 10MHz offset cancellation
|
|
* cornerpoint for brief period
|
|
* after each gain change
|
|
*/
|
|
|
|
/* DC offset cancellation cornerpoint select
|
|
* write: in RXMGC, set the cornerpoint
|
|
* read: in other modes, read AGC-controlled cornerpoint
|
|
*/
|
|
#define SA2400_MANRX_CORNERFREQ_MASK __BITS(11,10)
|
|
|
|
/* write: in RXMGC mode, sets receiver gain
|
|
* read: in other modes, read AGC-controlled gain
|
|
*/
|
|
#define SA2400_MANRX_RXGAIN_MASK __BITS(9,0)
|
|
|
|
#define SA2400_TX 7 /* Transmitter settings */
|
|
/* Tx offsets
|
|
*
|
|
* write: in test mode, sets the offsets
|
|
* read: in normal mode, returns automatic settings
|
|
*/
|
|
#define SA2400_TX_TXOSQON __BIT(19)
|
|
#define SA2400_TX_TXOSQSIGN __BIT(18)
|
|
#define SA2400_TX_TXOSQ_MASK __BITS(17,15)
|
|
#define SA2400_TX_TXOSION __BIT(14)
|
|
#define SA2400_TX_TXOSISIGN __BIT(13)
|
|
#define SA2400_TX_TXOSI_MASK __BITS(12,10)
|
|
|
|
#define SA2400_TX_RAMP_MASK __BITS(9,8) /* Ramp-up delay,
|
|
* 0: 1us
|
|
* 1: 2us
|
|
* 2: 3us
|
|
* 3: 4us
|
|
* datasheet says, "ramp-up
|
|
* time always 1us". huh?
|
|
*/
|
|
#define SA2400_TX_HIGAIN_MASK __BITS(7,4) /* Transmitter gain settings
|
|
* for TXHI output
|
|
*/
|
|
#define SA2400_TX_LOGAIN_MASK __BITS(3,0) /* Transmitter gain settings
|
|
* for TXLO output
|
|
*/
|
|
|
|
#define SA2400_VCO 8 /* VCO settings */
|
|
#define SA2400_VCO_ZERO __BITS(6,5) /* always zero */
|
|
#define SA2400_VCO_VCERR __BIT(4)/* VCO calibration error flag---no
|
|
* band with low enough frequency
|
|
* could be found
|
|
*/
|
|
#define SA2400_VCO_VCOBAND_MASK __BITS(3,0) /* VCO band,
|
|
* write: in test mode, sets
|
|
* VCO band
|
|
* read: in normal mode,
|
|
* the result of
|
|
* calibration (VCOCAL).
|
|
* 0 = highest
|
|
* frequencies
|
|
*/
|
|
#endif /* _DEV_IC_SA2400REG_H_ */
|