124 lines
4.3 KiB
C
124 lines
4.3 KiB
C
/* $NetBSD: if_ievar.h,v 1.7 1996/12/17 21:10:47 gwr Exp $ */
|
|
|
|
/*
|
|
* Machine-dependent glue for the Intel Ethernet (ie) driver.
|
|
*/
|
|
|
|
#define B_PER_F 3 /* number of buffers to allocate per frame */
|
|
#define MXFRAMES 256 /* max number of frames to allow for receive */
|
|
#define MXRXBUF (MXFRAMES*B_PER_F) /* max number of buffers to allocate */
|
|
#define IE_RBUF_SIZE 256 /* size of each buffer, MUST BE POWER OF TWO */
|
|
#define NTXBUF 2 /* number of transmit buffer/command pairs */
|
|
#define IE_TBUF_SIZE (3*512) /* length of transmit buffer */
|
|
|
|
enum ie_hardware {
|
|
IE_VME, /* multibus to VME ie card */
|
|
IE_OBIO, /* on board */
|
|
IE_VME3E, /* sun 3e VME card */
|
|
IE_UNKNOWN
|
|
};
|
|
|
|
/*
|
|
* Ethernet status, per interface.
|
|
*
|
|
* hardware addresses/sizes to know (all KVA):
|
|
* sc_iobase = base of chip's 24 bit address space
|
|
* sc_maddr = base address of chip RAM as stored in ie_base of iscp
|
|
* sc_msize = size of chip's RAM
|
|
* sc_reg = address of card dependent registers
|
|
*
|
|
* the chip uses two types of pointers: 16 bit and 24 bit
|
|
* 16 bit pointers are offsets from sc_maddr/ie_base
|
|
* KVA(16 bit offset) = offset + sc_maddr
|
|
* 24 bit pointers are offset from sc_iobase in KVA
|
|
* KVA(24 bit address) = address + sc_iobase
|
|
*
|
|
* on the vme/multibus we have the page map to control where ram appears
|
|
* in the address space. we choose to have RAM start at 0 in the
|
|
* 24 bit address space. this means that sc_iobase == sc_maddr!
|
|
* to get the phyiscal address of the board's RAM you must take the
|
|
* top 12 bits of the physical address of the register address
|
|
* and or in the 4 bits from the status word as bits 17-20 (remember that
|
|
* the board ignores the chip's top 4 address lines).
|
|
* For example:
|
|
* if the register is @ 0xffe88000, then the top 12 bits are 0xffe00000.
|
|
* to get the 4 bits from the the status word just do status & IEVME_HADDR.
|
|
* suppose the value is "4". Then just shift it left 16 bits to get
|
|
* it into bits 17-20 (e.g. 0x40000). Then or it to get the
|
|
* address of RAM (in our example: 0xffe40000). see the attach routine!
|
|
*
|
|
* In the onboard ie interface, the 24 bit address space is hardwired
|
|
* to be 0xff000000 -> 0xffffffff of KVA. this means that sc_iobase
|
|
* will be 0xff000000. sc_maddr will be where ever we allocate RAM
|
|
* in KVA. note that since the SCP is at a fixed address it means
|
|
* that we have to use some memory at a fixed KVA for the SCP.
|
|
* The Sun PROM leaves a page for us at the end of KVA space.
|
|
*/
|
|
struct ie_softc {
|
|
struct device sc_dev; /* device structure */
|
|
|
|
struct arpcom sc_arpcom;/* system arpcom structure */
|
|
#define sc_if sc_arpcom.ac_if /* network-visible interface */
|
|
#define sc_addr sc_arpcom.ac_enaddr /* hardware Ethernet address */
|
|
|
|
caddr_t sc_iobase; /* KVA of base of 24bit addr space */
|
|
caddr_t sc_maddr; /* KVA of base of chip's RAM */
|
|
u_int sc_msize; /* how much RAM we have/use */
|
|
caddr_t sc_reg; /* KVA of card's register */
|
|
|
|
enum ie_hardware hard_type; /* card type */
|
|
|
|
/* card dependent functions: */
|
|
void (*reset_586) __P((struct ie_softc *));
|
|
void (*chan_attn) __P((struct ie_softc *));
|
|
void (*run_586) __P((struct ie_softc *));
|
|
void (*sc_bcopy) __P((const void *, void *, u_int));
|
|
void (*sc_bzero) __P((void *, u_int));
|
|
|
|
int want_mcsetup; /* flag for multicast setup */
|
|
int promisc; /* are we in promisc mode? */
|
|
|
|
/*
|
|
* pointers to the 3 major control structures
|
|
*/
|
|
volatile struct ie_sys_conf_ptr *scp;
|
|
volatile struct ie_int_sys_conf_ptr *iscp;
|
|
volatile struct ie_sys_ctl_block *scb;
|
|
|
|
/*
|
|
* pointer and size of a block of KVA where the buffers
|
|
* are to be allocated from
|
|
*/
|
|
caddr_t buf_area;
|
|
int buf_area_sz;
|
|
|
|
/*
|
|
* the actual buffers (recv and xmit)
|
|
*/
|
|
volatile struct ie_recv_frame_desc *rframes[MXFRAMES];
|
|
volatile struct ie_recv_buf_desc *rbuffs[MXRXBUF];
|
|
volatile char *cbuffs[MXRXBUF];
|
|
int rfhead, rftail, rbhead, rbtail;
|
|
|
|
volatile struct ie_xmit_cmd *xmit_cmds[NTXBUF];
|
|
volatile struct ie_xmit_buf *xmit_buffs[NTXBUF];
|
|
u_char *xmit_cbuffs[NTXBUF];
|
|
int xmit_busy;
|
|
int xmit_free;
|
|
int xchead, xctail;
|
|
|
|
struct ie_en_addr mcast_addrs[MAXMCAST + 1];
|
|
int mcast_count;
|
|
|
|
int nframes; /* number of frames in use */
|
|
int nrxbuf; /* number of recv buffs in use */
|
|
|
|
#ifdef IEDEBUG
|
|
int sc_debug;
|
|
#endif
|
|
};
|
|
|
|
|
|
extern void ie_attach __P((struct ie_softc *));
|
|
extern int ie_intr __P((void *));
|