545 lines
13 KiB
C
545 lines
13 KiB
C
/* $NetBSD: lpt_isa.c,v 1.27 1995/01/22 00:12:39 mycroft Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1993, 1994 Charles Hannum.
|
|
* Copyright (c) 1990 William F. Jolitz, TeleMuse
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This software is a component of "386BSD" developed by
|
|
* William F. Jolitz, TeleMuse.
|
|
* 4. Neither the name of the developer nor the name "386BSD"
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
|
|
* AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
|
|
* SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
|
|
* THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
|
|
* NOT MAKE USE OF THIS WORK.
|
|
*
|
|
* FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
|
|
* BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
|
|
* REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES
|
|
* (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
|
|
* JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
|
|
* LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
|
|
* ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
|
|
* OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Device Driver for AT parallel printer port
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/user.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/device.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/pio.h>
|
|
|
|
#include <i386/isa/isavar.h>
|
|
#include <i386/isa/lptreg.h>
|
|
|
|
#define TIMEOUT hz*16 /* wait up to 16 seconds for a ready */
|
|
#define STEP hz/4
|
|
|
|
#define LPTPRI (PZERO+8)
|
|
#define LPT_BSIZE 1024
|
|
|
|
#if !defined(DEBUG) || !defined(notdef)
|
|
#define lprintf
|
|
#else
|
|
#define lprintf if (lptdebug) printf
|
|
int lptdebug = 1;
|
|
#endif
|
|
|
|
struct lpt_softc {
|
|
struct device sc_dev;
|
|
struct intrhand sc_ih;
|
|
|
|
size_t sc_count;
|
|
struct buf *sc_inbuf;
|
|
u_char *sc_cp;
|
|
int sc_spinmax;
|
|
int sc_iobase;
|
|
int sc_irq;
|
|
u_char sc_state;
|
|
#define LPT_OPEN 0x01 /* device is open */
|
|
#define LPT_OBUSY 0x02 /* printer is busy doing output */
|
|
#define LPT_INIT 0x04 /* waiting to initialize for open */
|
|
u_char sc_flags;
|
|
#define LPT_AUTOLF 0x20 /* automatic LF on CR */
|
|
#define LPT_NOPRIME 0x40 /* don't prime on open */
|
|
#define LPT_NOINTR 0x80 /* do not use interrupt */
|
|
u_char sc_control;
|
|
u_char sc_laststatus;
|
|
};
|
|
|
|
int lptprobe __P((struct device *, void *, void *));
|
|
void lptattach __P((struct device *, struct device *, void *));
|
|
int lptintr __P((struct lpt_softc *));
|
|
|
|
struct cfdriver lptcd = {
|
|
NULL, "lpt", lptprobe, lptattach, DV_TTY, sizeof(struct lpt_softc)
|
|
};
|
|
|
|
#define LPTUNIT(s) (minor(s) & 0x1f)
|
|
#define LPTFLAGS(s) (minor(s) & 0xe0)
|
|
|
|
#define LPS_INVERT (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK)
|
|
#define LPS_MASK (LPS_SELECT|LPS_NERR|LPS_NBSY|LPS_NACK|LPS_NOPAPER)
|
|
#define NOT_READY() ((inb(iobase + lpt_status) ^ LPS_INVERT) & LPS_MASK)
|
|
#define NOT_READY_ERR() not_ready(inb(iobase + lpt_status), sc)
|
|
static int not_ready __P((u_char, struct lpt_softc *));
|
|
|
|
static void lptwakeup __P((void *arg));
|
|
static int pushbytes __P((struct lpt_softc *));
|
|
|
|
/*
|
|
* Internal routine to lptprobe to do port tests of one byte value.
|
|
*/
|
|
int
|
|
lpt_port_test(port, data, mask)
|
|
int port;
|
|
u_char data, mask;
|
|
{
|
|
int timeout;
|
|
u_char temp;
|
|
|
|
data &= mask;
|
|
outb(port, data);
|
|
timeout = 1000;
|
|
do {
|
|
delay(10);
|
|
temp = inb(port) & mask;
|
|
} while (temp != data && --timeout);
|
|
lprintf("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n", port, data,
|
|
temp, timeout);
|
|
return (temp == data);
|
|
}
|
|
|
|
/*
|
|
* Logic:
|
|
* 1) You should be able to write to and read back the same value
|
|
* to the data port. Do an alternating zeros, alternating ones,
|
|
* walking zero, and walking one test to check for stuck bits.
|
|
*
|
|
* 2) You should be able to write to and read back the same value
|
|
* to the control port lower 5 bits, the upper 3 bits are reserved
|
|
* per the IBM PC technical reference manauls and different boards
|
|
* do different things with them. Do an alternating zeros, alternating
|
|
* ones, walking zero, and walking one test to check for stuck bits.
|
|
*
|
|
* Some printers drag the strobe line down when the are powered off
|
|
* so this bit has been masked out of the control port test.
|
|
*
|
|
* XXX Some printers may not like a fast pulse on init or strobe, I
|
|
* don't know at this point, if that becomes a problem these bits
|
|
* should be turned off in the mask byte for the control port test.
|
|
*
|
|
* 3) Set the data and control ports to a value of 0
|
|
*/
|
|
int
|
|
lptprobe(parent, match, aux)
|
|
struct device *parent;
|
|
void *match, *aux;
|
|
{
|
|
struct isa_attach_args *ia = aux;
|
|
int iobase = ia->ia_iobase;
|
|
int port;
|
|
u_char mask, data;
|
|
int i;
|
|
|
|
#ifdef DEBUG
|
|
#define ABORT do {printf("lptprobe: mask %x data %x failed\n", mask, data); \
|
|
return 0;} while (0)
|
|
#else
|
|
#define ABORT return 0
|
|
#endif
|
|
|
|
port = iobase + lpt_data;
|
|
mask = 0xff;
|
|
|
|
for (;;) {
|
|
data = 0x55; /* Alternating zeros */
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
|
|
data = 0xaa; /* Alternating ones */
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
|
|
for (i = 0; i < CHAR_BIT; i++) { /* Walking zero */
|
|
data = ~(1 << i);
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
}
|
|
|
|
for (i = 0; i < CHAR_BIT; i++) { /* Walking one */
|
|
data = (1 << i);
|
|
if (!lpt_port_test(port, data, mask))
|
|
ABORT;
|
|
}
|
|
|
|
if (port == iobase + lpt_data) {
|
|
port = iobase + lpt_control;
|
|
#if 1 /* XXX */
|
|
mask = 0x04;
|
|
#else
|
|
mask = 0x1e;
|
|
#endif
|
|
} else
|
|
break;
|
|
}
|
|
outb(iobase + lpt_data, 0);
|
|
outb(iobase + lpt_control, 0);
|
|
|
|
ia->ia_iosize = LPT_NPORTS;
|
|
ia->ia_msize = 0;
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
lptattach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct lpt_softc *sc = (void *)self;
|
|
struct isa_attach_args *ia = aux;
|
|
int iobase = ia->ia_iobase;
|
|
|
|
if (ia->ia_irq != IRQUNK)
|
|
printf("\n");
|
|
else
|
|
printf(": polled\n");
|
|
|
|
sc->sc_iobase = iobase;
|
|
sc->sc_irq = ia->ia_irq;
|
|
sc->sc_state = 0;
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
|
|
if (ia->ia_irq != IRQUNK) {
|
|
sc->sc_ih.ih_fun = lptintr;
|
|
sc->sc_ih.ih_arg = sc;
|
|
sc->sc_ih.ih_level = IPL_NONE;
|
|
intr_establish(ia->ia_irq, IST_EDGE, &sc->sc_ih);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the printer, then wait until it's selected and not busy.
|
|
*/
|
|
int
|
|
lptopen(dev, flag)
|
|
dev_t dev;
|
|
int flag;
|
|
{
|
|
int unit = LPTUNIT(dev);
|
|
u_char flags = LPTFLAGS(dev);
|
|
struct lpt_softc *sc;
|
|
int iobase;
|
|
u_char control;
|
|
int error;
|
|
int spin;
|
|
|
|
if (unit >= lptcd.cd_ndevs)
|
|
return ENXIO;
|
|
sc = lptcd.cd_devs[unit];
|
|
if (!sc)
|
|
return ENXIO;
|
|
|
|
if (sc->sc_irq == IRQUNK && (flags & LPT_NOINTR) == 0)
|
|
return ENXIO;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_state)
|
|
printf("%s: stat=0x%x not zero\n", sc->sc_dev.dv_xname,
|
|
sc->sc_state);
|
|
#endif
|
|
|
|
if (sc->sc_state)
|
|
return EBUSY;
|
|
|
|
sc->sc_state = LPT_INIT;
|
|
sc->sc_flags = flags;
|
|
lprintf("%s: open: flags=0x%x\n", sc->sc_dev.dv_xname, flags);
|
|
iobase = sc->sc_iobase;
|
|
|
|
if ((flags & LPT_NOPRIME) == 0) {
|
|
/* assert INIT for 100 usec to start up printer */
|
|
outb(iobase + lpt_control, LPC_SELECT);
|
|
delay(100);
|
|
}
|
|
|
|
control = LPC_SELECT | LPC_NINIT;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
/* wait till ready (printer running diagnostics) */
|
|
for (spin = 0; NOT_READY_ERR(); spin += STEP) {
|
|
if (spin >= TIMEOUT) {
|
|
sc->sc_state = 0;
|
|
return EBUSY;
|
|
}
|
|
|
|
/* wait 1/4 second, give up if we get a signal */
|
|
if (error = tsleep((caddr_t)sc, LPTPRI | PCATCH, "lptopen",
|
|
STEP) != EWOULDBLOCK) {
|
|
sc->sc_state = 0;
|
|
return error;
|
|
}
|
|
}
|
|
|
|
if ((flags & LPT_NOINTR) == 0)
|
|
control |= LPC_IENABLE;
|
|
if (flags & LPT_AUTOLF)
|
|
control |= LPC_AUTOLF;
|
|
sc->sc_control = control;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
sc->sc_inbuf = geteblk(LPT_BSIZE);
|
|
sc->sc_count = 0;
|
|
sc->sc_state = LPT_OPEN;
|
|
|
|
if ((sc->sc_flags & LPT_NOINTR) == 0)
|
|
lptwakeup(sc);
|
|
|
|
lprintf("%s: opened\n", sc->sc_dev.dv_xname);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
not_ready(status, sc)
|
|
u_char status;
|
|
struct lpt_softc *sc;
|
|
{
|
|
u_char new;
|
|
|
|
status = (status ^ LPS_INVERT) & LPS_MASK;
|
|
new = status & ~sc->sc_laststatus;
|
|
sc->sc_laststatus = status;
|
|
|
|
if (new & LPS_SELECT)
|
|
log(LOG_NOTICE, "%s: offline\n", sc->sc_dev.dv_xname);
|
|
else if (new & LPS_NOPAPER)
|
|
log(LOG_NOTICE, "%s: out of paper\n", sc->sc_dev.dv_xname);
|
|
else if (new & LPS_NERR)
|
|
log(LOG_NOTICE, "%s: output error\n", sc->sc_dev.dv_xname);
|
|
|
|
return status;
|
|
}
|
|
|
|
void
|
|
lptwakeup(arg)
|
|
void *arg;
|
|
{
|
|
struct lpt_softc *sc = arg;
|
|
int s;
|
|
|
|
s = spltty();
|
|
lptintr(sc);
|
|
splx(s);
|
|
|
|
timeout(lptwakeup, sc, STEP);
|
|
}
|
|
|
|
/*
|
|
* Close the device, and free the local line buffer.
|
|
*/
|
|
lptclose(dev, flag)
|
|
dev_t dev;
|
|
int flag;
|
|
{
|
|
int unit = LPTUNIT(dev);
|
|
struct lpt_softc *sc = lptcd.cd_devs[unit];
|
|
int iobase = sc->sc_iobase;
|
|
|
|
if (sc->sc_count)
|
|
(void) pushbytes(sc);
|
|
|
|
if ((sc->sc_flags & LPT_NOINTR) == 0)
|
|
untimeout(lptwakeup, sc);
|
|
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
sc->sc_state = 0;
|
|
outb(iobase + lpt_control, LPC_NINIT);
|
|
brelse(sc->sc_inbuf);
|
|
|
|
lprintf("%s: closed\n", sc->sc_dev.dv_xname);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pushbytes(sc)
|
|
struct lpt_softc *sc;
|
|
{
|
|
int iobase = sc->sc_iobase;
|
|
int error;
|
|
|
|
if (sc->sc_flags & LPT_NOINTR) {
|
|
int spin, tic;
|
|
u_char control = sc->sc_control;
|
|
|
|
while (sc->sc_count > 0) {
|
|
spin = 0;
|
|
while (NOT_READY()) {
|
|
if (++spin < sc->sc_spinmax)
|
|
continue;
|
|
tic = 0;
|
|
/* adapt busy-wait algorithm */
|
|
sc->sc_spinmax++;
|
|
while (NOT_READY_ERR()) {
|
|
/* exponential backoff */
|
|
tic = tic + tic + 1;
|
|
if (tic > TIMEOUT)
|
|
tic = TIMEOUT;
|
|
error = tsleep((caddr_t)sc,
|
|
LPTPRI | PCATCH, "lptpsh", tic);
|
|
if (error != EWOULDBLOCK)
|
|
return error;
|
|
}
|
|
break;
|
|
}
|
|
|
|
outb(iobase + lpt_data, *sc->sc_cp++);
|
|
outb(iobase + lpt_control, control | LPC_STROBE);
|
|
sc->sc_count--;
|
|
outb(iobase + lpt_control, control);
|
|
|
|
/* adapt busy-wait algorithm */
|
|
if (spin*2 + 16 < sc->sc_spinmax)
|
|
sc->sc_spinmax--;
|
|
}
|
|
} else {
|
|
int s;
|
|
|
|
while (sc->sc_count > 0) {
|
|
/* if the printer is ready for a char, give it one */
|
|
if ((sc->sc_state & LPT_OBUSY) == 0) {
|
|
lprintf("%s: write %d\n", sc->sc_dev.dv_xname,
|
|
sc->sc_count);
|
|
s = spltty();
|
|
(void) lptintr(sc);
|
|
splx(s);
|
|
}
|
|
if (error = tsleep((caddr_t)sc, LPTPRI | PCATCH,
|
|
"lptwrite2", 0))
|
|
return error;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Copy a line from user space to a local buffer, then call putc to get the
|
|
* chars moved to the output queue.
|
|
*/
|
|
lptwrite(dev, uio)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
{
|
|
struct lpt_softc *sc = lptcd.cd_devs[LPTUNIT(dev)];
|
|
size_t n;
|
|
int error = 0;
|
|
|
|
while (n = min(LPT_BSIZE, uio->uio_resid)) {
|
|
uiomove(sc->sc_cp = sc->sc_inbuf->b_data, n, uio);
|
|
sc->sc_count = n;
|
|
error = pushbytes(sc);
|
|
if (error) {
|
|
/*
|
|
* Return accurate residual if interrupted or timed
|
|
* out.
|
|
*/
|
|
uio->uio_resid += sc->sc_count;
|
|
sc->sc_count = 0;
|
|
return error;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle printer interrupts which occur when the printer is ready to accept
|
|
* another char.
|
|
*/
|
|
int
|
|
lptintr(sc)
|
|
struct lpt_softc *sc;
|
|
{
|
|
int iobase = sc->sc_iobase;
|
|
|
|
#if 0
|
|
if ((sc->sc_state & LPT_OPEN) == 0)
|
|
return 0;
|
|
#endif
|
|
|
|
/* is printer online and ready for output */
|
|
if (NOT_READY() && NOT_READY_ERR())
|
|
return 0;
|
|
|
|
if (sc->sc_count) {
|
|
u_char control = sc->sc_control;
|
|
/* send char */
|
|
outb(iobase + lpt_data, *sc->sc_cp++);
|
|
outb(iobase + lpt_control, control | LPC_STROBE);
|
|
sc->sc_count--;
|
|
outb(iobase + lpt_control, control);
|
|
sc->sc_state |= LPT_OBUSY;
|
|
} else
|
|
sc->sc_state &= ~LPT_OBUSY;
|
|
|
|
if (sc->sc_count == 0) {
|
|
/* none, wake up the top half to get more */
|
|
wakeup((caddr_t)sc);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
lptioctl(dev, cmd, data, flag)
|
|
dev_t dev;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
int flag;
|
|
{
|
|
int error = 0;
|
|
|
|
switch (cmd) {
|
|
default:
|
|
error = ENODEV;
|
|
}
|
|
|
|
return error;
|
|
}
|