NetBSD/sys/arch/hpcmips/tx/tx39.c

355 lines
8.3 KiB
C

/* $NetBSD: tx39.c,v 1.5 1999/12/08 15:54:11 uch Exp $ */
/*
* Copyright (c) 1999, by UCHIYAMA Yasushi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the developer may NOT be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "opt_tx39_debug.h"
#include "m38813c.h"
#include "p7416buf.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <machine/locore.h> /* cpu_id */
#include <machine/bootinfo.h> /* bootinfo */
#include <machine/sysconf.h> /* platform */
#include <machine/bus.h>
#include <machine/intr.h>
#include <hpcmips/hpcmips/machdep.h> /* cpu_model */
#include <hpcmips/dev/biconsvar.h>
#include <hpcmips/dev/bicons.h>
#include <hpcmips/tx/tx39biureg.h>
#include <hpcmips/tx/tx39reg.h>
#include <hpcmips/tx/tx39var.h>
#ifdef TX391X
#include <hpcmips/tx/tx3912videovar.h>
#endif
#include <sys/termios.h>
#include <sys/ttydefaults.h>
#include <hpcmips/tx/tx39uartvar.h>
#ifndef CONSPEED
#define CONSPEED TTYDEF_SPEED
#endif
/* console keyboard */
#if NP7416BUF > 0
#include <hpcmips/dev/p7416bufvar.h>
#endif
#if NM38813C > 0
#include <hpcmips/dev/m38813cvar.h>
#endif
extern unsigned nullclkread __P((void));
extern unsigned (*clkread) __P((void));
struct tx_chipset_tag tx_chipset;
#ifdef TX39_DEBUG
u_int32_t tx39debugflag;
#endif
void tx_init __P((void));
int tx39icu_intr __P((u_int32_t, u_int32_t, u_int32_t, u_int32_t));
int tx39_find_dram __P((u_int32_t, u_int32_t));
/* TX39-specific initialization vector */
void tx_os_init __P((void));
void tx_bus_reset __P((void));
void tx_cons_init __P((void));
void tx_device_register __P((struct device *, void *));
void tx_fb_init __P((caddr_t*));
int tx_mem_init __P((caddr_t));
void tx_reboot __P((int howto, char *bootstr));
int tx_intr __P((u_int32_t mask, u_int32_t pc, u_int32_t statusReg,
u_int32_t causeReg));
void
tx_init()
{
tx_chipset_tag_t tc;
int model, rev;
tc = tx_conf_get_tag();
/*
* Platform Specific Function Hooks
*/
platform.os_init = tx_os_init;
platform.bus_reset = tx_bus_reset;
platform.cons_init = tx_cons_init;
platform.device_register = tx_device_register;
platform.fb_init = tx_fb_init;
platform.mem_init = tx_mem_init;
platform.reboot = tx_reboot;
model = (cpu_id.cpu.cp_majrev << 4)| cpu_id.cpu.cp_minrev;
switch (model) {
default:
/* Unknown TOSHIBA TX39-series */
sprintf(cpu_model, "Unknown TOSHIBA TX39-series %x.%x",
cpu_id.cpu.cp_majrev, cpu_id.cpu.cp_minrev);
break;
case TMPR3912:
sprintf(cpu_model, "TOSHIBA TMPR3912");
cpuspeed = 50; /* XXX Should calibrate XXX */
break;
case TMPR3922:
rev = tx_conf_read(tc, TX3922_REVISION_REG);
sprintf(cpu_model, "TOSHIBA TMPR3922 rev. %x.%x",
(rev >> 4) & 0xf, rev & 0xf);
cpuspeed = 100; /* XXX Should calibrate XXX */
break;
}
}
void
tx_os_init()
{
/*
* Set up interrupt handling and I/O addresses.
*/
mips_hardware_intr = tx39icu_intr;
splvec.splbio = MIPS_SPL_2_4;
splvec.splnet = MIPS_SPL_2_4;
splvec.spltty = MIPS_SPL_2_4;
splvec.splimp = MIPS_SPL_2_4;
splvec.splclock = MIPS_SPL_2_4;
splvec.splstatclock = MIPS_SPL_2_4;
/* no high resolution timer circuit; possibly never called */
clkread = nullclkread;
}
void
tx_fb_init(kernend)
caddr_t *kernend;
{
#ifdef TX391X
tx_chipset_tag_t tc;
u_int32_t fb_start, fb_addr, fb_size, fb_line_bytes;
/* Initialize to access TX39 configuration register */
tc = tx_conf_get_tag();
fb_start = MIPS_KSEG0_TO_PHYS(*kernend);
tx3912video_init(tc, fb_start, bootinfo->fb_width,
bootinfo->fb_height, &fb_addr, &fb_size,
&fb_line_bytes);
/* Set bootinfo for bicons */
bootinfo->fb_line_bytes = fb_line_bytes;
bootinfo->fb_addr = (unsigned char*)MIPS_PHYS_TO_KSEG1(fb_addr);
/* Skip V-RAM area */
*kernend += fb_size;
#endif /* TX391X */
#ifdef TX392X
/*
* Plum V-RAM isn't accessible until pmap_bootstrap,
* at this time, bicons is disabled.
*/
bootinfo->fb_addr = 0;
#endif /* TX392X */
}
int
tx_mem_init(kernend)
caddr_t kernend; /* kseg0 */
{
u_int32_t startaddr, endaddr;
int npage, xpage, kpage;
startaddr = MIPS_PHYS_TO_KSEG1(
(btoc((u_int32_t)kernend - MIPS_KSEG0_START)) << PGSHIFT);
endaddr = MIPS_PHYS_TO_KSEG1(TX39_SYSADDR_DRAMBANK0CS1 +
TX39_SYSADDR_DRAMBANK_LEN);
kpage = btoc(MIPS_KSEG1_TO_PHYS(startaddr));
/* D-RAM bank0 */
npage = tx39_find_dram(startaddr, endaddr);
printf("DRAM bank0: %d pages (%dMByte) reserved %d pages\n",
npage + 1, ((npage + 1) * NBPG) / 0x100000, kpage + 1);
npage -= kpage; /* exclude kernel area */
/* Clear DRAM area */
memset((void*)startaddr, 0, npage * NBPG);
/* D-RAM bank1 XXX find only. not usable yet */
startaddr = MIPS_PHYS_TO_KSEG1(TX39_SYSADDR_DRAMBANK1CS1);
endaddr = MIPS_PHYS_TO_KSEG1(TX39_SYSADDR_DRAMBANK1CS1 +
TX39_SYSADDR_DRAMBANK_LEN);
xpage = tx39_find_dram(startaddr, endaddr);
printf("DRAM bank1: %d pages (%dMByte) ...but not usable yet\n",
xpage + 1, ((xpage + 1) * NBPG) / 0x100000);
/*
* Clear currently unused D-RAM area
* (For reboot Windows CE clearly)
*/
memset((void*)startaddr, 0, npage * NBPG);
memset((void*)(KERNBASE + 0x400), 0,
KERNTEXTOFF - KERNBASE - 0x800);
return npage; /* Return bank0's memory only */
}
void
tx_reboot(howto, bootstr)
int howto;
char *bootstr;
{
goto *(u_int32_t *)MIPS_RESET_EXC_VEC;
}
int
tx39_find_dram(startaddr, endaddr)
u_int32_t startaddr; /* kseg1 */
u_int32_t endaddr; /* kseg1 */
{
#define DRAM_MAGIC0 0xac1dcafe
#define DRAM_MAGIC1 0x19700220
u_int32_t page;
int npage;
page = startaddr;
((volatile int *)page)[0] = DRAM_MAGIC0;
((volatile int *)page)[4] = DRAM_MAGIC1;
page += NBPG;
for (npage = 0; page < endaddr; page += NBPG, npage++) {
if ((((volatile int *)page)[0] == DRAM_MAGIC0 &&
((volatile int *)page)[4] == DRAM_MAGIC1)) {
return npage;
}
}
/* no memory in this bank */
return 0;
}
void
tx_bus_reset()
{
/* hpcmips port don't use */
}
void
tx_cons_init()
{
int slot;
#ifdef SERIALCONSSLOT
slot = SERIALCONSSLOT;
#else
slot = TX39_UARTA;
#endif
if (bootinfo->bi_cnuse & BI_CNUSE_SERIAL) {
if(txcom_cnattach(slot, CONSPEED,
(TTYDEF_CFLAG & ~(CSIZE | PARENB)) |
CS8)) {
panic("tx_cons_init: can't attach serial console.");
}
} else {
#if NP7416BUF > 0
if(p7416buf_cnattach(TX39_SYSADDR_CS3)) {
panic("tx_cons_init: can't init console");
}
#elif NM38813C > 0
if(m38813c_cnattach(TX39_SYSADDR_CARD1)) {
panic("tx_cons_init: can't init console");
}
#endif
}
}
void
tx_device_register(dev, aux)
struct device *dev;
void *aux;
{
/* hpcmips port don't use */
}
void
tx_conf_register_intr(t, intrt)
tx_chipset_tag_t t;
void *intrt;
{
if (tx_chipset.tc_intrt) {
panic("duplicate intrt");
}
if (t != &tx_chipset) {
panic("bogus tx_chipset_tag");
}
tx_chipset.tc_intrt = intrt;
}
#ifdef TX39_PREFER_FUNCTION
tx_chipset_tag_t
tx_conf_get_tag()
{
return (tx_chipset_tag_t)&tx_chipset;
}
txreg_t
tx_conf_read(t, reg)
tx_chipset_tag_t t;
int reg;
{
return *((txreg_t*)(TX39_SYSADDR_CONFIG_REG_KSEG1 + reg));
}
void
tx_conf_write(t, reg, val)
tx_chipset_tag_t t;
int reg;
txreg_t val;
{
*((txreg_t*)(TX39_SYSADDR_CONFIG_REG_KSEG1 + reg)) = val;
}
#endif /* TX39_PREFER_FUNCTION */
int
__is_set_print(reg, mask, name)
u_int32_t reg;
int mask;
char *name;
{
if (reg & mask) {
printf("%s ", name);
return 1;
}
return 0;
}