2317 lines
56 KiB
C
2317 lines
56 KiB
C
/* $NetBSD: sbdsp.c,v 1.76 1997/10/19 07:42:39 augustss Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1991-1993 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the Computer Systems
|
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* SoundBlaster Pro code provided by John Kohl, based on lots of
|
|
* information he gleaned from Steve Haehnichen <steve@vigra.com>'s
|
|
* SBlast driver for 386BSD and DOS driver code from Daniel Sachs
|
|
* <sachs@meibm15.cen.uiuc.edu>.
|
|
* Lots of rewrites by Lennart Augustsson <augustss@cs.chalmers.se>
|
|
* with information from SB "Hardware Programming Guide" and the
|
|
* Linux drivers.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/buf.h>
|
|
#include <vm/vm.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <sys/audioio.h>
|
|
#include <dev/audio_if.h>
|
|
#include <dev/mulaw.h>
|
|
#include <dev/auconv.h>
|
|
|
|
#include <dev/isa/isavar.h>
|
|
#include <dev/isa/isadmavar.h>
|
|
|
|
#include <dev/isa/sbreg.h>
|
|
#include <dev/isa/sbdspvar.h>
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
#define DPRINTF(x) if (sbdspdebug) printf x
|
|
int sbdspdebug = 0;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#endif
|
|
|
|
#ifndef SBDSP_NPOLL
|
|
#define SBDSP_NPOLL 3000
|
|
#endif
|
|
|
|
struct {
|
|
int wdsp;
|
|
int rdsp;
|
|
int wmidi;
|
|
} sberr;
|
|
|
|
/*
|
|
* Time constant routines follow. See SBK, section 12.
|
|
* Although they don't come out and say it (in the docs),
|
|
* the card clearly uses a 1MHz countdown timer, as the
|
|
* low-speed formula (p. 12-4) is:
|
|
* tc = 256 - 10^6 / sr
|
|
* In high-speed mode, the constant is the upper byte of a 16-bit counter,
|
|
* and a 256MHz clock is used:
|
|
* tc = 65536 - 256 * 10^ 6 / sr
|
|
* Since we can only use the upper byte of the HS TC, the two formulae
|
|
* are equivalent. (Why didn't they say so?) E.g.,
|
|
* (65536 - 256 * 10 ^ 6 / x) >> 8 = 256 - 10^6 / x
|
|
*
|
|
* The crossover point (from low- to high-speed modes) is different
|
|
* for the SBPRO and SB20. The table on p. 12-5 gives the following data:
|
|
*
|
|
* SBPRO SB20
|
|
* ----- --------
|
|
* input ls min 4 KHz 4 KHz
|
|
* input ls max 23 KHz 13 KHz
|
|
* input hs max 44.1 KHz 15 KHz
|
|
* output ls min 4 KHz 4 KHz
|
|
* output ls max 23 KHz 23 KHz
|
|
* output hs max 44.1 KHz 44.1 KHz
|
|
*/
|
|
/* XXX Should we round the tc?
|
|
#define SB_RATE_TO_TC(x) (((65536 - 256 * 1000000 / (x)) + 128) >> 8)
|
|
*/
|
|
#define SB_RATE_TO_TC(x) (256 - 1000000 / (x))
|
|
#define SB_TC_TO_RATE(tc) (1000000 / (256 - (tc)))
|
|
|
|
struct sbmode {
|
|
short model;
|
|
u_char channels;
|
|
u_char precision;
|
|
u_short lowrate, highrate;
|
|
u_char cmd;
|
|
u_char cmdchan;
|
|
};
|
|
static struct sbmode sbpmodes[] = {
|
|
{ SB_1, 1, 8, 4000, 22727, SB_DSP_WDMA },
|
|
{ SB_20, 1, 8, 4000, 22727, SB_DSP_WDMA_LOOP },
|
|
{ SB_2x, 1, 8, 4000, 22727, SB_DSP_WDMA_LOOP },
|
|
{ SB_2x, 1, 8, 22727, 45454, SB_DSP_HS_OUTPUT },
|
|
{ SB_PRO, 1, 8, 4000, 22727, SB_DSP_WDMA_LOOP },
|
|
{ SB_PRO, 1, 8, 22727, 45454, SB_DSP_HS_OUTPUT },
|
|
{ SB_PRO, 2, 8, 11025, 22727, SB_DSP_HS_OUTPUT },
|
|
/* Yes, we write the record mode to set 16-bit playback mode. weird, huh? */
|
|
{ SB_JAZZ, 1, 8, 4000, 22727, SB_DSP_WDMA_LOOP, SB_DSP_RECORD_MONO },
|
|
{ SB_JAZZ, 1, 8, 22727, 45454, SB_DSP_HS_OUTPUT, SB_DSP_RECORD_MONO },
|
|
{ SB_JAZZ, 2, 8, 11025, 22727, SB_DSP_HS_OUTPUT, SB_DSP_RECORD_STEREO },
|
|
{ SB_JAZZ, 1, 16, 4000, 22727, SB_DSP_WDMA_LOOP, JAZZ16_RECORD_MONO },
|
|
{ SB_JAZZ, 1, 16, 22727, 45454, SB_DSP_HS_OUTPUT, JAZZ16_RECORD_MONO },
|
|
{ SB_JAZZ, 2, 16, 11025, 22727, SB_DSP_HS_OUTPUT, JAZZ16_RECORD_STEREO },
|
|
{ SB_16, 1, 8, 5000, 45000, SB_DSP16_WDMA_8 },
|
|
{ SB_16, 2, 8, 5000, 45000, SB_DSP16_WDMA_8 },
|
|
#define PLAY16 15 /* must be the index of the next entry in the table */
|
|
{ SB_16, 1, 16, 5000, 45000, SB_DSP16_WDMA_16 },
|
|
{ SB_16, 2, 16, 5000, 45000, SB_DSP16_WDMA_16 },
|
|
{ -1 }
|
|
};
|
|
static struct sbmode sbrmodes[] = {
|
|
{ SB_1, 1, 8, 4000, 12987, SB_DSP_RDMA },
|
|
{ SB_20, 1, 8, 4000, 12987, SB_DSP_RDMA_LOOP },
|
|
{ SB_2x, 1, 8, 4000, 12987, SB_DSP_RDMA_LOOP },
|
|
{ SB_2x, 1, 8, 12987, 14925, SB_DSP_HS_INPUT },
|
|
{ SB_PRO, 1, 8, 4000, 22727, SB_DSP_RDMA_LOOP, SB_DSP_RECORD_MONO },
|
|
{ SB_PRO, 1, 8, 22727, 45454, SB_DSP_HS_INPUT, SB_DSP_RECORD_MONO },
|
|
{ SB_PRO, 2, 8, 11025, 22727, SB_DSP_HS_INPUT, SB_DSP_RECORD_STEREO },
|
|
{ SB_JAZZ, 1, 8, 4000, 22727, SB_DSP_RDMA_LOOP, SB_DSP_RECORD_MONO },
|
|
{ SB_JAZZ, 1, 8, 22727, 45454, SB_DSP_HS_INPUT, SB_DSP_RECORD_MONO },
|
|
{ SB_JAZZ, 2, 8, 11025, 22727, SB_DSP_HS_INPUT, SB_DSP_RECORD_STEREO },
|
|
{ SB_JAZZ, 1, 16, 4000, 22727, SB_DSP_RDMA_LOOP, JAZZ16_RECORD_MONO },
|
|
{ SB_JAZZ, 1, 16, 22727, 45454, SB_DSP_HS_INPUT, JAZZ16_RECORD_MONO },
|
|
{ SB_JAZZ, 2, 16, 11025, 22727, SB_DSP_HS_INPUT, JAZZ16_RECORD_STEREO },
|
|
{ SB_16, 1, 8, 5000, 45000, SB_DSP16_RDMA_8 },
|
|
{ SB_16, 2, 8, 5000, 45000, SB_DSP16_RDMA_8 },
|
|
{ SB_16, 1, 16, 5000, 45000, SB_DSP16_RDMA_16 },
|
|
{ SB_16, 2, 16, 5000, 45000, SB_DSP16_RDMA_16 },
|
|
{ -1 }
|
|
};
|
|
|
|
void sbversion __P((struct sbdsp_softc *));
|
|
void sbdsp_jazz16_probe __P((struct sbdsp_softc *));
|
|
void sbdsp_set_mixer_gain __P((struct sbdsp_softc *sc, int port));
|
|
void sbdsp_to __P((void *));
|
|
void sbdsp_pause __P((struct sbdsp_softc *));
|
|
int sbdsp_set_timeconst __P((struct sbdsp_softc *, int));
|
|
int sbdsp16_set_rate __P((struct sbdsp_softc *, int, int));
|
|
int sbdsp_set_in_ports __P((struct sbdsp_softc *, int));
|
|
void sbdsp_set_ifilter __P((void *, int));
|
|
int sbdsp_get_ifilter __P((void *));
|
|
|
|
static int sbdsp_dma_setup_input __P((struct sbdsp_softc *sc));
|
|
static int sbdsp_dma_setup_output __P((struct sbdsp_softc *sc));
|
|
static int sbdsp_adjust __P((int, int));
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
void sb_printsc __P((struct sbdsp_softc *));
|
|
|
|
void
|
|
sb_printsc(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
int i;
|
|
|
|
printf("open %d dmachan %d/%d %d/%d iobase 0x%x irq %d\n",
|
|
(int)sc->sc_open, sc->sc_i.run, sc->sc_o.run,
|
|
sc->sc_drq8, sc->sc_drq16,
|
|
sc->sc_iobase, sc->sc_irq);
|
|
printf("irate %d itc %x orate %d otc %x\n",
|
|
sc->sc_i.rate, sc->sc_i.tc,
|
|
sc->sc_o.rate, sc->sc_o.tc);
|
|
printf("spkron %u nintr %lu\n",
|
|
sc->spkr_state, sc->sc_interrupts);
|
|
printf("intr8 %p arg8 %p\n",
|
|
sc->sc_intr8, sc->sc_arg16);
|
|
printf("intr16 %p arg16 %p\n",
|
|
sc->sc_intr8, sc->sc_arg16);
|
|
printf("gain:");
|
|
for (i = 0; i < SB_NDEVS; i++)
|
|
printf(" %u,%u", sc->gain[i][SB_LEFT], sc->gain[i][SB_RIGHT]);
|
|
printf("\n");
|
|
}
|
|
#endif /* AUDIO_DEBUG */
|
|
|
|
/*
|
|
* Probe / attach routines.
|
|
*/
|
|
|
|
/*
|
|
* Probe for the soundblaster hardware.
|
|
*/
|
|
int
|
|
sbdsp_probe(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
|
|
if (sbdsp_reset(sc) < 0) {
|
|
DPRINTF(("sbdsp: couldn't reset card\n"));
|
|
return 0;
|
|
}
|
|
/* if flags set, go and probe the jazz16 stuff */
|
|
if (sc->sc_dev.dv_cfdata->cf_flags & 1)
|
|
sbdsp_jazz16_probe(sc);
|
|
else
|
|
sbversion(sc);
|
|
if (sc->sc_model == SB_UNK) {
|
|
/* Unknown SB model found. */
|
|
DPRINTF(("sbdsp: unknown SB model found\n"));
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Try add-on stuff for Jazz16.
|
|
*/
|
|
void
|
|
sbdsp_jazz16_probe(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
static u_char jazz16_irq_conf[16] = {
|
|
-1, -1, 0x02, 0x03,
|
|
-1, 0x01, -1, 0x04,
|
|
-1, 0x02, 0x05, -1,
|
|
-1, -1, -1, 0x06};
|
|
static u_char jazz16_drq_conf[8] = {
|
|
-1, 0x01, -1, 0x02,
|
|
-1, 0x03, -1, 0x04};
|
|
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
sbversion(sc);
|
|
|
|
DPRINTF(("jazz16 probe\n"));
|
|
|
|
if (bus_space_map(iot, JAZZ16_CONFIG_PORT, 1, 0, &ioh)) {
|
|
DPRINTF(("bus map failed\n"));
|
|
return;
|
|
}
|
|
|
|
if (jazz16_drq_conf[sc->sc_drq8] == (u_char)-1 ||
|
|
jazz16_irq_conf[sc->sc_irq] == (u_char)-1) {
|
|
DPRINTF(("drq/irq check failed\n"));
|
|
goto done; /* give up, we can't do it. */
|
|
}
|
|
|
|
bus_space_write_1(iot, ioh, 0, JAZZ16_WAKEUP);
|
|
delay(10000); /* delay 10 ms */
|
|
bus_space_write_1(iot, ioh, 0, JAZZ16_SETBASE);
|
|
bus_space_write_1(iot, ioh, 0, sc->sc_iobase & 0x70);
|
|
|
|
if (sbdsp_reset(sc) < 0) {
|
|
DPRINTF(("sbdsp_reset check failed\n"));
|
|
goto done; /* XXX? what else could we do? */
|
|
}
|
|
|
|
if (sbdsp_wdsp(sc, JAZZ16_READ_VER)) {
|
|
DPRINTF(("read16 setup failed\n"));
|
|
goto done;
|
|
}
|
|
|
|
if (sbdsp_rdsp(sc) != JAZZ16_VER_JAZZ) {
|
|
DPRINTF(("read16 failed\n"));
|
|
goto done;
|
|
}
|
|
|
|
/* XXX set both 8 & 16-bit drq to same channel, it works fine. */
|
|
sc->sc_drq16 = sc->sc_drq8;
|
|
if (sbdsp_wdsp(sc, JAZZ16_SET_DMAINTR) ||
|
|
sbdsp_wdsp(sc, (jazz16_drq_conf[sc->sc_drq16] << 4) |
|
|
jazz16_drq_conf[sc->sc_drq8]) ||
|
|
sbdsp_wdsp(sc, jazz16_irq_conf[sc->sc_irq])) {
|
|
DPRINTF(("sbdsp: can't write jazz16 probe stuff\n"));
|
|
} else {
|
|
DPRINTF(("jazz16 detected!\n"));
|
|
sc->sc_model = SB_JAZZ;
|
|
sc->sc_mixer_model = SBM_CT1345; /* XXX really? */
|
|
}
|
|
|
|
done:
|
|
bus_space_unmap(iot, ioh, 1);
|
|
}
|
|
|
|
/*
|
|
* Attach hardware to driver, attach hardware driver to audio
|
|
* pseudo-device driver .
|
|
*/
|
|
void
|
|
sbdsp_attach(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
struct audio_params pparams, rparams;
|
|
int i;
|
|
u_int v;
|
|
|
|
/*
|
|
* Create our DMA maps.
|
|
*/
|
|
if (sc->sc_drq8 != -1) {
|
|
if (isa_dmamap_create(sc->sc_isa, sc->sc_drq8,
|
|
MAX_ISADMA, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW)) {
|
|
printf("%s: can't create map for drq %d\n",
|
|
sc->sc_dev.dv_xname, sc->sc_drq8);
|
|
return;
|
|
}
|
|
}
|
|
if (sc->sc_drq16 != -1 && sc->sc_drq16 != sc->sc_drq8) {
|
|
if (isa_dmamap_create(sc->sc_isa, sc->sc_drq16,
|
|
MAX_ISADMA, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW)) {
|
|
printf("%s: can't create map for drq %d\n",
|
|
sc->sc_dev.dv_xname, sc->sc_drq16);
|
|
return;
|
|
}
|
|
}
|
|
|
|
pparams = audio_default;
|
|
rparams = audio_default;
|
|
sbdsp_set_params(sc, AUMODE_RECORD|AUMODE_PLAY, 0, &pparams, &rparams);
|
|
|
|
sbdsp_set_in_ports(sc, 1 << SB_MIC_VOL);
|
|
|
|
if (sc->sc_mixer_model != SBM_NONE) {
|
|
/* Reset the mixer.*/
|
|
sbdsp_mix_write(sc, SBP_MIX_RESET, SBP_MIX_RESET);
|
|
/* And set our own default values */
|
|
for (i = 0; i < SB_NDEVS; i++) {
|
|
switch(i) {
|
|
case SB_MIC_VOL:
|
|
case SB_LINE_IN_VOL:
|
|
v = 0;
|
|
break;
|
|
case SB_BASS:
|
|
case SB_TREBLE:
|
|
v = SB_ADJUST_GAIN(sc, AUDIO_MAX_GAIN/2);
|
|
break;
|
|
case SB_CD_IN_MUTE:
|
|
case SB_MIC_IN_MUTE:
|
|
case SB_LINE_IN_MUTE:
|
|
case SB_MIDI_IN_MUTE:
|
|
case SB_CD_SWAP:
|
|
case SB_MIC_SWAP:
|
|
case SB_LINE_SWAP:
|
|
case SB_MIDI_SWAP:
|
|
case SB_CD_OUT_MUTE:
|
|
case SB_MIC_OUT_MUTE:
|
|
case SB_LINE_OUT_MUTE:
|
|
v = 0;
|
|
break;
|
|
default:
|
|
v = SB_ADJUST_GAIN(sc, AUDIO_MAX_GAIN * 3 / 4);
|
|
break;
|
|
}
|
|
sc->gain[i][SB_LEFT] = sc->gain[i][SB_RIGHT] = v;
|
|
sbdsp_set_mixer_gain(sc, i);
|
|
}
|
|
sc->in_filter = 0; /* no filters turned on, please */
|
|
}
|
|
|
|
printf(": dsp v%d.%02d%s\n",
|
|
SBVER_MAJOR(sc->sc_version), SBVER_MINOR(sc->sc_version),
|
|
sc->sc_model == SB_JAZZ ? ": <Jazz16>" : "");
|
|
|
|
sc->sc_fullduplex = ISSB16CLASS(sc) &&
|
|
sc->sc_drq8 != -1 && sc->sc_drq16 != -1 &&
|
|
sc->sc_drq8 != sc->sc_drq16;
|
|
}
|
|
|
|
void
|
|
sbdsp_mix_write(sc, mixerport, val)
|
|
struct sbdsp_softc *sc;
|
|
int mixerport;
|
|
int val;
|
|
{
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh = sc->sc_ioh;
|
|
int s;
|
|
|
|
s = splaudio();
|
|
bus_space_write_1(iot, ioh, SBP_MIXER_ADDR, mixerport);
|
|
delay(20);
|
|
bus_space_write_1(iot, ioh, SBP_MIXER_DATA, val);
|
|
delay(30);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
sbdsp_mix_read(sc, mixerport)
|
|
struct sbdsp_softc *sc;
|
|
int mixerport;
|
|
{
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh = sc->sc_ioh;
|
|
int val;
|
|
int s;
|
|
|
|
s = splaudio();
|
|
bus_space_write_1(iot, ioh, SBP_MIXER_ADDR, mixerport);
|
|
delay(20);
|
|
val = bus_space_read_1(iot, ioh, SBP_MIXER_DATA);
|
|
delay(30);
|
|
splx(s);
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* Various routines to interface to higher level audio driver
|
|
*/
|
|
|
|
int
|
|
sbdsp_query_encoding(addr, fp)
|
|
void *addr;
|
|
struct audio_encoding *fp;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
int emul;
|
|
|
|
emul = ISSB16CLASS(sc) ? 0 : AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
switch (fp->index) {
|
|
case 0:
|
|
strcpy(fp->name, AudioEulinear);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = 0;
|
|
return 0;
|
|
case 1:
|
|
strcpy(fp->name, AudioEmulaw);
|
|
fp->encoding = AUDIO_ENCODING_ULAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
return 0;
|
|
case 2:
|
|
strcpy(fp->name, AudioEalaw);
|
|
fp->encoding = AUDIO_ENCODING_ALAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
return 0;
|
|
case 3:
|
|
strcpy(fp->name, AudioEslinear);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = emul;
|
|
return 0;
|
|
}
|
|
if (!ISSB16CLASS(sc) && sc->sc_model != SB_JAZZ)
|
|
return EINVAL;
|
|
|
|
switch(fp->index) {
|
|
case 4:
|
|
strcpy(fp->name, AudioEslinear_le);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = 0;
|
|
return 0;
|
|
case 5:
|
|
strcpy(fp->name, AudioEulinear_le);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = emul;
|
|
return 0;
|
|
case 6:
|
|
strcpy(fp->name, AudioEslinear_be);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
return 0;
|
|
case 7:
|
|
strcpy(fp->name, AudioEulinear_be);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
return 0;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_set_params(addr, setmode, usemode, play, rec)
|
|
void *addr;
|
|
int setmode, usemode;
|
|
struct audio_params *play, *rec;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
struct sbmode *m;
|
|
u_int rate, tc, bmode;
|
|
void (*swcode) __P((void *, u_char *buf, int cnt));
|
|
int factor;
|
|
int model;
|
|
int chan;
|
|
struct audio_params *p;
|
|
int mode;
|
|
|
|
model = sc->sc_model;
|
|
if (model > SB_16)
|
|
model = SB_16; /* later models work like SB16 */
|
|
|
|
/* Set first record info, then play info */
|
|
for(mode = AUMODE_RECORD; mode != -1;
|
|
mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) {
|
|
if ((setmode & mode) == 0)
|
|
continue;
|
|
|
|
p = mode == AUMODE_PLAY ? play : rec;
|
|
/* Locate proper commands */
|
|
for(m = mode == AUMODE_PLAY ? sbpmodes : sbrmodes;
|
|
m->model != -1; m++) {
|
|
if (model == m->model &&
|
|
p->channels == m->channels &&
|
|
p->precision == m->precision &&
|
|
p->sample_rate >= m->lowrate &&
|
|
p->sample_rate < m->highrate)
|
|
break;
|
|
}
|
|
if (m->model == -1)
|
|
return EINVAL;
|
|
rate = p->sample_rate;
|
|
swcode = 0;
|
|
factor = 1;
|
|
tc = 1;
|
|
bmode = -1;
|
|
if (model == SB_16) {
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
if (p->precision == 16)
|
|
swcode = swap_bytes;
|
|
/* fall into */
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
bmode = SB_BMODE_SIGNED;
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
if (p->precision == 16)
|
|
swcode = swap_bytes;
|
|
/* fall into */
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
bmode = SB_BMODE_UNSIGNED;
|
|
break;
|
|
case AUDIO_ENCODING_ULAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
swcode = mulaw_to_ulinear16;
|
|
factor = 2;
|
|
m = &sbpmodes[PLAY16];
|
|
} else
|
|
swcode = ulinear8_to_mulaw;
|
|
bmode = SB_BMODE_UNSIGNED;
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
swcode = alaw_to_ulinear16;
|
|
factor = 2;
|
|
m = &sbpmodes[PLAY16];
|
|
} else
|
|
swcode = ulinear8_to_alaw;
|
|
bmode = SB_BMODE_UNSIGNED;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
if (p->channels == 2)
|
|
bmode |= SB_BMODE_STEREO;
|
|
} else if (m->model == SB_JAZZ && m->precision == 16) {
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
swcode = change_sign16;
|
|
break;
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
swcode = swap_bytes;
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
swcode = mode == AUMODE_PLAY ?
|
|
swap_bytes_change_sign16 : change_sign16_swap_bytes;
|
|
break;
|
|
case AUDIO_ENCODING_ULAW:
|
|
swcode = mode == AUMODE_PLAY ?
|
|
mulaw_to_ulinear8 : ulinear8_to_mulaw;
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
swcode = mode == AUMODE_PLAY ?
|
|
alaw_to_ulinear8 : ulinear8_to_alaw;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
tc = SB_RATE_TO_TC(p->sample_rate * p->channels);
|
|
p->sample_rate = SB_TC_TO_RATE(tc) / p->channels;
|
|
} else {
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
swcode = change_sign8;
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
break;
|
|
case AUDIO_ENCODING_ULAW:
|
|
swcode = mode == AUMODE_PLAY ?
|
|
mulaw_to_ulinear8 : ulinear8_to_mulaw;
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
swcode = mode == AUMODE_PLAY ?
|
|
alaw_to_ulinear8 : ulinear8_to_alaw;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
tc = SB_RATE_TO_TC(p->sample_rate * p->channels);
|
|
p->sample_rate = SB_TC_TO_RATE(tc) / p->channels;
|
|
}
|
|
|
|
chan = m->precision == 16 ? sc->sc_drq16 : sc->sc_drq8;
|
|
if (mode == AUMODE_PLAY) {
|
|
sc->sc_o.rate = rate;
|
|
sc->sc_o.tc = tc;
|
|
sc->sc_o.modep = m;
|
|
sc->sc_o.bmode = bmode;
|
|
sc->sc_o.dmachan = chan;
|
|
} else {
|
|
sc->sc_i.rate = rate;
|
|
sc->sc_i.tc = tc;
|
|
sc->sc_i.modep = m;
|
|
sc->sc_i.bmode = bmode;
|
|
sc->sc_i.dmachan = chan;
|
|
}
|
|
|
|
p->sw_code = swcode;
|
|
p->factor = factor;
|
|
DPRINTF(("sbdsp_set_params: model=%d, mode=%d, rate=%ld, prec=%d, chan=%d, enc=%d -> tc=%02x, cmd=%02x, bmode=%02x, cmdchan=%02x, swcode=%p, factor=%d\n",
|
|
sc->sc_model, mode, p->sample_rate, p->precision, p->channels,
|
|
p->encoding, tc, m->cmd, bmode, m->cmdchan, swcode, factor));
|
|
|
|
}
|
|
/*
|
|
* XXX
|
|
* Should wait for chip to be idle.
|
|
*/
|
|
sc->sc_i.run = SB_NOTRUNNING;
|
|
sc->sc_o.run = SB_NOTRUNNING;
|
|
|
|
if (sc->sc_fullduplex &&
|
|
(usemode & (AUMODE_PLAY | AUMODE_RECORD)) == (AUMODE_PLAY | AUMODE_RECORD) &&
|
|
sc->sc_i.dmachan == sc->sc_o.dmachan) {
|
|
DPRINTF(("sbdsp_commit: fd=%d, usemode=%d, idma=%d, odma=%d\n", sc->sc_fullduplex, usemode, sc->sc_i.dmachan, sc->sc_o.dmachan));
|
|
if (sc->sc_o.dmachan == sc->sc_drq8) {
|
|
/* Use 16 bit DMA for playing by expanding the samples. */
|
|
play->sw_code = linear8_to_linear16;
|
|
play->factor = 2;
|
|
sc->sc_o.modep = &sbpmodes[PLAY16];
|
|
sc->sc_o.dmachan = sc->sc_drq16;
|
|
} else {
|
|
return EINVAL;
|
|
}
|
|
}
|
|
DPRINTF(("sbdsp_set_params ichan=%d, ochan=%d\n", sc->sc_i.dmachan, sc->sc_o.dmachan));
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
sbdsp_set_ifilter(addr, which)
|
|
void *addr;
|
|
int which;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
int mixval;
|
|
|
|
mixval = sbdsp_mix_read(sc, SBP_INFILTER) & ~SBP_IFILTER_MASK;
|
|
switch (which) {
|
|
case 0:
|
|
mixval |= SBP_FILTER_OFF;
|
|
break;
|
|
case SB_TREBLE:
|
|
mixval |= SBP_FILTER_ON | SBP_IFILTER_HIGH;
|
|
break;
|
|
case SB_BASS:
|
|
mixval |= SBP_FILTER_ON | SBP_IFILTER_LOW;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
sc->in_filter = mixval & SBP_IFILTER_MASK;
|
|
sbdsp_mix_write(sc, SBP_INFILTER, mixval);
|
|
}
|
|
|
|
int
|
|
sbdsp_get_ifilter(addr)
|
|
void *addr;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
sc->in_filter =
|
|
sbdsp_mix_read(sc, SBP_INFILTER) & SBP_IFILTER_MASK;
|
|
switch (sc->in_filter) {
|
|
case SBP_FILTER_ON|SBP_IFILTER_HIGH:
|
|
return SB_TREBLE;
|
|
case SBP_FILTER_ON|SBP_IFILTER_LOW:
|
|
return SB_BASS;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int
|
|
sbdsp_set_in_ports(sc, mask)
|
|
struct sbdsp_softc *sc;
|
|
int mask;
|
|
{
|
|
int bitsl, bitsr;
|
|
int sbport;
|
|
|
|
DPRINTF(("sbdsp_set_in_ports: model=%d, mask=%x\n",
|
|
sc->sc_mixer_model, mask));
|
|
|
|
switch(sc->sc_mixer_model) {
|
|
case SBM_NONE:
|
|
return EINVAL;
|
|
case SBM_CT1335:
|
|
if (mask != (1 << SB_MIC_VOL))
|
|
return EINVAL;
|
|
break;
|
|
case SBM_CT1345:
|
|
switch (mask) {
|
|
case 1 << SB_MIC_VOL:
|
|
sbport = SBP_FROM_MIC;
|
|
break;
|
|
case 1 << SB_LINE_IN_VOL:
|
|
sbport = SBP_FROM_LINE;
|
|
break;
|
|
case 1 << SB_CD_VOL:
|
|
sbport = SBP_FROM_CD;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
sbdsp_mix_write(sc, SBP_RECORD_SOURCE, sbport | sc->in_filter);
|
|
break;
|
|
case SBM_CT1XX5:
|
|
case SBM_CT1745:
|
|
if (mask & ~((1<<SB_MIDI_VOL) | (1<<SB_LINE_IN_VOL) |
|
|
(1<<SB_CD_VOL) | (1<<SB_MIC_VOL)))
|
|
return EINVAL;
|
|
bitsr = 0;
|
|
if (mask & (1<<SB_MIDI_VOL)) bitsr |= SBP_MIDI_SRC_R;
|
|
if (mask & (1<<SB_LINE_IN_VOL)) bitsr |= SBP_LINE_SRC_R;
|
|
if (mask & (1<<SB_CD_VOL)) bitsr |= SBP_CD_SRC_R;
|
|
bitsl = SB_SRC_R_TO_L(bitsr);
|
|
if (mask & (1<<SB_MIC_VOL)) {
|
|
bitsl |= SBP_MIC_SRC;
|
|
bitsr |= SBP_MIC_SRC;
|
|
}
|
|
sbdsp_mix_write(sc, SBP_RECORD_SOURCE_L, bitsl);
|
|
sbdsp_mix_write(sc, SBP_RECORD_SOURCE_R, bitsr);
|
|
break;
|
|
}
|
|
|
|
sc->in_mask = mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_speaker_ctl(addr, newstate)
|
|
void *addr;
|
|
int newstate;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
if ((newstate == SPKR_ON) &&
|
|
(sc->spkr_state == SPKR_OFF)) {
|
|
sbdsp_spkron(sc);
|
|
sc->spkr_state = SPKR_ON;
|
|
}
|
|
if ((newstate == SPKR_OFF) &&
|
|
(sc->spkr_state == SPKR_ON)) {
|
|
sbdsp_spkroff(sc);
|
|
sc->spkr_state = SPKR_OFF;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_round_blocksize(addr, blk)
|
|
void *addr;
|
|
int blk;
|
|
{
|
|
blk &= -4; /* round to biggest sample size */
|
|
return blk;
|
|
}
|
|
|
|
int
|
|
sbdsp_open(addr, flags)
|
|
void *addr;
|
|
int flags;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
DPRINTF(("sbdsp_open: sc=%p\n", sc));
|
|
|
|
if (sc->sc_open != 0 || sbdsp_reset(sc) != 0)
|
|
return ENXIO;
|
|
|
|
sc->sc_open = 1;
|
|
sc->sc_openflags = flags;
|
|
sc->sc_mintr = 0;
|
|
if (ISSBPRO(sc) &&
|
|
sbdsp_wdsp(sc, SB_DSP_RECORD_MONO) < 0) {
|
|
DPRINTF(("sbdsp_open: can't set mono mode\n"));
|
|
/* we'll readjust when it's time for DMA. */
|
|
}
|
|
|
|
/*
|
|
* Leave most things as they were; users must change things if
|
|
* the previous process didn't leave it they way they wanted.
|
|
* Looked at another way, it's easy to set up a configuration
|
|
* in one program and leave it for another to inherit.
|
|
*/
|
|
DPRINTF(("sbdsp_open: opened\n"));
|
|
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
sbdsp_close(addr)
|
|
void *addr;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
DPRINTF(("sbdsp_close: sc=%p\n", sc));
|
|
|
|
sc->sc_open = 0;
|
|
sbdsp_spkroff(sc);
|
|
sc->spkr_state = SPKR_OFF;
|
|
sc->sc_intr8 = 0;
|
|
sc->sc_intr16 = 0;
|
|
sc->sc_mintr = 0;
|
|
sbdsp_haltdma(sc);
|
|
|
|
DPRINTF(("sbdsp_close: closed\n"));
|
|
}
|
|
|
|
/*
|
|
* Lower-level routines
|
|
*/
|
|
|
|
/*
|
|
* Reset the card.
|
|
* Return non-zero if the card isn't detected.
|
|
*/
|
|
int
|
|
sbdsp_reset(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh = sc->sc_ioh;
|
|
|
|
sc->sc_intr8 = 0;
|
|
sc->sc_intr16 = 0;
|
|
if (sc->sc_i.run != SB_NOTRUNNING) {
|
|
isa_dmaabort(sc->sc_isa, sc->sc_i.dmachan);
|
|
sc->sc_i.run = SB_NOTRUNNING;
|
|
}
|
|
if (sc->sc_o.run != SB_NOTRUNNING) {
|
|
isa_dmaabort(sc->sc_isa, sc->sc_o.dmachan);
|
|
sc->sc_o.run = SB_NOTRUNNING;
|
|
}
|
|
|
|
/*
|
|
* See SBK, section 11.3.
|
|
* We pulse a reset signal into the card.
|
|
* Gee, what a brilliant hardware design.
|
|
*/
|
|
bus_space_write_1(iot, ioh, SBP_DSP_RESET, 1);
|
|
delay(10);
|
|
bus_space_write_1(iot, ioh, SBP_DSP_RESET, 0);
|
|
delay(30);
|
|
if (sbdsp_rdsp(sc) != SB_MAGIC)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Write a byte to the dsp.
|
|
* We are at the mercy of the card as we use a
|
|
* polling loop and wait until it can take the byte.
|
|
*/
|
|
int
|
|
sbdsp_wdsp(sc, v)
|
|
struct sbdsp_softc *sc;
|
|
int v;
|
|
{
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh = sc->sc_ioh;
|
|
int i;
|
|
u_char x;
|
|
|
|
for (i = SBDSP_NPOLL; --i >= 0; ) {
|
|
x = bus_space_read_1(iot, ioh, SBP_DSP_WSTAT);
|
|
delay(10);
|
|
if ((x & SB_DSP_BUSY) == 0) {
|
|
bus_space_write_1(iot, ioh, SBP_DSP_WRITE, v);
|
|
delay(10);
|
|
return 0;
|
|
}
|
|
}
|
|
++sberr.wdsp;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Read a byte from the DSP, using polling.
|
|
*/
|
|
int
|
|
sbdsp_rdsp(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
bus_space_tag_t iot = sc->sc_iot;
|
|
bus_space_handle_t ioh = sc->sc_ioh;
|
|
int i;
|
|
u_char x;
|
|
|
|
for (i = SBDSP_NPOLL; --i >= 0; ) {
|
|
x = bus_space_read_1(iot, ioh, SBP_DSP_RSTAT);
|
|
delay(10);
|
|
if (x & SB_DSP_READY) {
|
|
x = bus_space_read_1(iot, ioh, SBP_DSP_READ);
|
|
delay(10);
|
|
return x;
|
|
}
|
|
}
|
|
++sberr.rdsp;
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Doing certain things (like toggling the speaker) make
|
|
* the SB hardware go away for a while, so pause a little.
|
|
*/
|
|
void
|
|
sbdsp_to(arg)
|
|
void *arg;
|
|
{
|
|
wakeup(arg);
|
|
}
|
|
|
|
void
|
|
sbdsp_pause(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
extern int hz;
|
|
|
|
timeout(sbdsp_to, sbdsp_to, hz/8);
|
|
(void)tsleep(sbdsp_to, PWAIT, "sbpause", 0);
|
|
}
|
|
|
|
/*
|
|
* Turn on the speaker. The SBK documention says this operation
|
|
* can take up to 1/10 of a second. Higher level layers should
|
|
* probably let the task sleep for this amount of time after
|
|
* calling here. Otherwise, things might not work (because
|
|
* sbdsp_wdsp() and sbdsp_rdsp() will probably timeout.)
|
|
*
|
|
* These engineers had their heads up their ass when
|
|
* they designed this card.
|
|
*/
|
|
void
|
|
sbdsp_spkron(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
(void)sbdsp_wdsp(sc, SB_DSP_SPKR_ON);
|
|
sbdsp_pause(sc);
|
|
}
|
|
|
|
/*
|
|
* Turn off the speaker; see comment above.
|
|
*/
|
|
void
|
|
sbdsp_spkroff(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
(void)sbdsp_wdsp(sc, SB_DSP_SPKR_OFF);
|
|
sbdsp_pause(sc);
|
|
}
|
|
|
|
/*
|
|
* Read the version number out of the card.
|
|
* Store version information in the softc.
|
|
*/
|
|
void
|
|
sbversion(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
int v;
|
|
|
|
sc->sc_model = SB_UNK;
|
|
sc->sc_version = 0;
|
|
if (sbdsp_wdsp(sc, SB_DSP_VERSION) < 0)
|
|
return;
|
|
v = sbdsp_rdsp(sc) << 8;
|
|
v |= sbdsp_rdsp(sc);
|
|
if (v < 0)
|
|
return;
|
|
sc->sc_version = v;
|
|
switch(SBVER_MAJOR(v)) {
|
|
case 1:
|
|
sc->sc_mixer_model = SBM_NONE;
|
|
sc->sc_model = SB_1;
|
|
break;
|
|
case 2:
|
|
/* Some SB2 have a mixer, some don't. */
|
|
sbdsp_mix_write(sc, SBP_1335_MASTER_VOL, 0x04);
|
|
sbdsp_mix_write(sc, SBP_1335_MIDI_VOL, 0x06);
|
|
/* Check if we can read back the mixer values. */
|
|
if ((sbdsp_mix_read(sc, SBP_1335_MASTER_VOL) & 0x0e) == 0x04 &&
|
|
(sbdsp_mix_read(sc, SBP_1335_MIDI_VOL) & 0x0e) == 0x06)
|
|
sc->sc_mixer_model = SBM_CT1335;
|
|
else
|
|
sc->sc_mixer_model = SBM_NONE;
|
|
if (SBVER_MINOR(v) == 0)
|
|
sc->sc_model = SB_20;
|
|
else
|
|
sc->sc_model = SB_2x;
|
|
break;
|
|
case 3:
|
|
sc->sc_mixer_model = SBM_CT1345;
|
|
sc->sc_model = SB_PRO;
|
|
break;
|
|
case 4:
|
|
#if 0
|
|
/* XXX This does not work */
|
|
/* Most SB16 have a tone controls, but some don't. */
|
|
sbdsp_mix_write(sc, SB16P_TREBLE_L, 0x80);
|
|
/* Check if we can read back the mixer value. */
|
|
if ((sbdsp_mix_read(sc, SB16P_TREBLE_L) & 0xf0) == 0x80)
|
|
sc->sc_mixer_model = SBM_CT1745;
|
|
else
|
|
sc->sc_mixer_model = SBM_CT1XX5;
|
|
#else
|
|
sc->sc_mixer_model = SBM_CT1745;
|
|
#endif
|
|
/* XXX what about SB_32 */
|
|
if (SBVER_MINOR(v) == 16)
|
|
sc->sc_model = SB_64;
|
|
else
|
|
sc->sc_model = SB_16;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Halt a DMA in progress.
|
|
*/
|
|
int
|
|
sbdsp_haltdma(addr)
|
|
void *addr;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
DPRINTF(("sbdsp_haltdma: sc=%p\n", sc));
|
|
|
|
sbdsp_reset(sc);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_set_timeconst(sc, tc)
|
|
struct sbdsp_softc *sc;
|
|
int tc;
|
|
{
|
|
DPRINTF(("sbdsp_set_timeconst: sc=%p tc=%d\n", sc, tc));
|
|
|
|
if (sbdsp_wdsp(sc, SB_DSP_TIMECONST) < 0 ||
|
|
sbdsp_wdsp(sc, tc) < 0)
|
|
return EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp16_set_rate(sc, cmd, rate)
|
|
struct sbdsp_softc *sc;
|
|
int cmd, rate;
|
|
{
|
|
DPRINTF(("sbdsp16_set_rate: sc=%p cmd=0x%02x rate=%d\n", sc, cmd, rate));
|
|
|
|
if (sbdsp_wdsp(sc, cmd) < 0 ||
|
|
sbdsp_wdsp(sc, rate >> 8) < 0 ||
|
|
sbdsp_wdsp(sc, rate) < 0)
|
|
return EIO;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_dma_init_input(addr, buf, cc)
|
|
void *addr;
|
|
void *buf;
|
|
int cc;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
if (sc->sc_model == SB_1)
|
|
return 0;
|
|
sc->sc_i.run = SB_DMARUNNING;
|
|
DPRINTF(("sbdsp: dma start loop input addr=%p cc=%d chan=%d\n",
|
|
buf, cc, sc->sc_i.dmachan));
|
|
isa_dmastart(sc->sc_isa, sc->sc_i.dmachan, buf,
|
|
cc, NULL, DMAMODE_READ | DMAMODE_LOOP, BUS_DMA_NOWAIT);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sbdsp_dma_setup_input(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
int stereo = sc->sc_i.modep->channels == 2;
|
|
int filter;
|
|
|
|
/* Initialize the PCM */
|
|
if (ISSBPRO(sc)) {
|
|
if (sbdsp_wdsp(sc, sc->sc_i.modep->cmdchan) < 0)
|
|
return 0;
|
|
filter = stereo ? SBP_FILTER_OFF : sc->in_filter;
|
|
sbdsp_mix_write(sc, SBP_INFILTER,
|
|
(sbdsp_mix_read(sc, SBP_INFILTER) &
|
|
~SBP_IFILTER_MASK) | filter);
|
|
}
|
|
|
|
if (ISSB16CLASS(sc)) {
|
|
if (sbdsp16_set_rate(sc, SB_DSP16_INPUTRATE,
|
|
sc->sc_i.rate)) {
|
|
DPRINTF(("sbdsp_dma_setup_input: rate=%d set failed\n",
|
|
sc->sc_i.rate));
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (sbdsp_set_timeconst(sc, sc->sc_i.tc)) {
|
|
DPRINTF(("sbdsp_dma_setup_input: tc=%d set failed\n",
|
|
sc->sc_i.rate));
|
|
return 0;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
sbdsp_dma_input(addr, p, cc, intr, arg)
|
|
void *addr;
|
|
void *p;
|
|
int cc;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 1)
|
|
printf("sbdsp_dma_input: sc=%p buf=%p cc=%d intr=%p(%p)\n",
|
|
addr, p, cc, intr, arg);
|
|
#endif
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_i.modep->channels == 2 && (cc & 1)) {
|
|
DPRINTF(("stereo record odd bytes (%d)\n", cc));
|
|
return EIO;
|
|
}
|
|
#endif
|
|
|
|
if (sc->sc_i.modep->precision == 8) {
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_i.dmachan != sc->sc_drq8) {
|
|
printf("sbdsp_dma_input: prec=%d bad chan %d\n",
|
|
sc->sc_i.modep->precision, sc->sc_i.dmachan);
|
|
return EIO;
|
|
}
|
|
#endif
|
|
sc->sc_intr8 = intr;
|
|
sc->sc_arg8 = arg;
|
|
} else {
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_i.dmachan != sc->sc_drq16) {
|
|
printf("sbdsp_dma_input: prec=%d bad chan %d\n",
|
|
sc->sc_i.modep->precision, sc->sc_i.dmachan);
|
|
return EIO;
|
|
}
|
|
#endif
|
|
sc->sc_intr16 = intr;
|
|
sc->sc_arg16 = arg;
|
|
}
|
|
|
|
switch(sc->sc_i.run) {
|
|
case SB_NOTRUNNING:
|
|
/* Non-looping mode, not initialized */
|
|
sc->sc_i.run = SB_RUNNING;
|
|
if (!sbdsp_dma_setup_input(sc))
|
|
goto giveup;
|
|
/* fall into */
|
|
case SB_RUNNING:
|
|
/* Non-looping mode, start DMA */
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 2)
|
|
printf("sbdsp_dma_input: dmastart buf=%p cc=%d chan=%d\n",
|
|
p, cc, sc->sc_i.dmachan);
|
|
#endif
|
|
isa_dmastart(sc->sc_isa, sc->sc_i.dmachan, p,
|
|
cc, NULL, DMAMODE_READ, BUS_DMA_NOWAIT);
|
|
|
|
/* Start PCM in non-looping mode */
|
|
if ((sc->sc_model == SB_JAZZ && sc->sc_i.dmachan > 3) ||
|
|
(sc->sc_model != SB_JAZZ && sc->sc_i.modep->precision == 16))
|
|
cc >>= 1;
|
|
--cc;
|
|
if (sbdsp_wdsp(sc, sc->sc_i.modep->cmd) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_input: SB1 DMA start failed\n"));
|
|
goto giveup;
|
|
}
|
|
break;
|
|
case SB_DMARUNNING:
|
|
/* Looping mode, not initialized */
|
|
sc->sc_i.run = SB_PCMRUNNING;
|
|
if (!sbdsp_dma_setup_input(sc))
|
|
goto giveup;
|
|
if ((sc->sc_model == SB_JAZZ && sc->sc_i.dmachan > 3) ||
|
|
(sc->sc_model != SB_JAZZ && sc->sc_i.modep->precision == 16))
|
|
cc >>= 1;
|
|
--cc;
|
|
/* Initialize looping PCM */
|
|
if (ISSB16CLASS(sc)) {
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 2)
|
|
printf("sbdsp16 input command cmd=0x%02x bmode=0x%02x cc=%d\n",
|
|
sc->sc_i.modep->cmd, sc->sc_i.bmode, cc);
|
|
#endif
|
|
if (sbdsp_wdsp(sc, sc->sc_i.modep->cmd) < 0 ||
|
|
sbdsp_wdsp(sc, sc->sc_i.bmode) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_input: SB16 DMA start failed\n"));
|
|
DPRINTF(("sbdsp16 input command cmd=0x%02x bmode=0x%02x cc=%d\n",
|
|
sc->sc_i.modep->cmd, sc->sc_i.bmode, cc));
|
|
goto giveup;
|
|
}
|
|
} else {
|
|
DPRINTF(("sbdsp_dma_input: set blocksize=%d\n", cc));
|
|
if (sbdsp_wdsp(sc, SB_DSP_BLOCKSIZE) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_input: SB2 DMA blocksize failed\n"));
|
|
goto giveup;
|
|
}
|
|
if (sbdsp_wdsp(sc, sc->sc_i.modep->cmd) < 0) {
|
|
DPRINTF(("sbdsp_dma_input: SB2 DMA start failed\n"));
|
|
goto giveup;
|
|
}
|
|
}
|
|
break;
|
|
case SB_PCMRUNNING:
|
|
/* Looping mode, nothing to do */
|
|
break;
|
|
}
|
|
return 0;
|
|
|
|
giveup:
|
|
sbdsp_reset(sc);
|
|
return EIO;
|
|
}
|
|
|
|
int
|
|
sbdsp_dma_init_output(addr, buf, cc)
|
|
void *addr;
|
|
void *buf;
|
|
int cc;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
if (sc->sc_model == SB_1)
|
|
return 0;
|
|
sc->sc_o.run = SB_DMARUNNING;
|
|
DPRINTF(("sbdsp: dma start loop output buf=%p cc=%d chan=%d\n",
|
|
buf, cc, sc->sc_o.dmachan));
|
|
isa_dmastart(sc->sc_isa, sc->sc_o.dmachan, buf,
|
|
cc, NULL, DMAMODE_WRITE | DMAMODE_LOOP, BUS_DMA_NOWAIT);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sbdsp_dma_setup_output(sc)
|
|
struct sbdsp_softc *sc;
|
|
{
|
|
int stereo = sc->sc_o.modep->channels == 2;
|
|
int cmd;
|
|
|
|
if (ISSBPRO(sc)) {
|
|
/* make sure we re-set stereo mixer bit when we start output. */
|
|
sbdsp_mix_write(sc, SBP_STEREO,
|
|
(sbdsp_mix_read(sc, SBP_STEREO) & ~SBP_PLAYMODE_MASK) |
|
|
(stereo ? SBP_PLAYMODE_STEREO : SBP_PLAYMODE_MONO));
|
|
cmd = sc->sc_o.modep->cmdchan;
|
|
if (cmd && sbdsp_wdsp(sc, cmd) < 0)
|
|
return 0;
|
|
}
|
|
|
|
if (ISSB16CLASS(sc)) {
|
|
if (sbdsp16_set_rate(sc, SB_DSP16_OUTPUTRATE,
|
|
sc->sc_o.rate)) {
|
|
DPRINTF(("sbdsp_dma_setup_output: rate=%d set failed\n",
|
|
sc->sc_o.rate));
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (sbdsp_set_timeconst(sc, sc->sc_o.tc)) {
|
|
DPRINTF(("sbdsp_dma_setup_output: tc=%d set failed\n",
|
|
sc->sc_o.rate));
|
|
return 0;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
sbdsp_dma_output(addr, p, cc, intr, arg)
|
|
void *addr;
|
|
void *p;
|
|
int cc;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 1)
|
|
printf("sbdsp_dma_output: sc=%p buf=%p cc=%d intr=%p(%p)\n", addr, p, cc, intr, arg);
|
|
#endif
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_o.modep->channels == 2 && (cc & 1)) {
|
|
DPRINTF(("stereo playback odd bytes (%d)\n", cc));
|
|
return EIO;
|
|
}
|
|
#endif
|
|
|
|
if (sc->sc_o.modep->precision == 8) {
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_o.dmachan != sc->sc_drq8) {
|
|
printf("sbdsp_dma_output: prec=%d bad chan %d\n",
|
|
sc->sc_o.modep->precision, sc->sc_o.dmachan);
|
|
return EIO;
|
|
}
|
|
#endif
|
|
sc->sc_intr8 = intr;
|
|
sc->sc_arg8 = arg;
|
|
} else {
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_o.dmachan != sc->sc_drq16) {
|
|
printf("sbdsp_dma_output: prec=%d bad chan %d\n",
|
|
sc->sc_o.modep->precision, sc->sc_o.dmachan);
|
|
return EIO;
|
|
}
|
|
#endif
|
|
sc->sc_intr16 = intr;
|
|
sc->sc_arg16 = arg;
|
|
}
|
|
|
|
switch(sc->sc_o.run) {
|
|
case SB_NOTRUNNING:
|
|
/* Non-looping mode, not initialized */
|
|
sc->sc_o.run = SB_RUNNING;
|
|
if (!sbdsp_dma_setup_output(sc))
|
|
goto giveup;
|
|
/* fall into */
|
|
case SB_RUNNING:
|
|
/* Non-looping mode, initialized. Start DMA and PCM */
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 2)
|
|
printf("sbdsp: start dma out addr=%p, cc=%d, chan=%d\n",
|
|
p, cc, sc->sc_o.dmachan);
|
|
#endif
|
|
isa_dmastart(sc->sc_isa, sc->sc_o.dmachan, p,
|
|
cc, NULL, DMAMODE_WRITE, BUS_DMA_NOWAIT);
|
|
if ((sc->sc_model == SB_JAZZ && sc->sc_o.dmachan > 3) ||
|
|
(sc->sc_model != SB_JAZZ && sc->sc_o.modep->precision == 16))
|
|
cc >>= 1;
|
|
--cc;
|
|
if (sbdsp_wdsp(sc, sc->sc_o.modep->cmd) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_output: SB1 DMA start failed\n"));
|
|
goto giveup;
|
|
}
|
|
break;
|
|
case SB_DMARUNNING:
|
|
/* Looping mode, not initialized */
|
|
sc->sc_o.run = SB_PCMRUNNING;
|
|
if (!sbdsp_dma_setup_output(sc))
|
|
goto giveup;
|
|
if ((sc->sc_model == SB_JAZZ && sc->sc_o.dmachan > 3) ||
|
|
(sc->sc_model != SB_JAZZ && sc->sc_o.modep->precision == 16))
|
|
cc >>= 1;
|
|
--cc;
|
|
/* Initialize looping PCM */
|
|
if (ISSB16CLASS(sc)) {
|
|
DPRINTF(("sbdsp_dma_output: SB16 cmd=0x%02x bmode=0x%02x cc=%d\n",
|
|
sc->sc_o.modep->cmd,sc->sc_o.bmode, cc));
|
|
if (sbdsp_wdsp(sc, sc->sc_o.modep->cmd) < 0 ||
|
|
sbdsp_wdsp(sc, sc->sc_o.bmode) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_output: SB16 DMA start failed\n"));
|
|
goto giveup;
|
|
}
|
|
} else {
|
|
DPRINTF(("sbdsp_dma_output: set blocksize=%d\n", cc));
|
|
if (sbdsp_wdsp(sc, SB_DSP_BLOCKSIZE) < 0 ||
|
|
sbdsp_wdsp(sc, cc) < 0 ||
|
|
sbdsp_wdsp(sc, cc >> 8) < 0) {
|
|
DPRINTF(("sbdsp_dma_output: SB2 DMA blocksize failed\n"));
|
|
goto giveup;
|
|
}
|
|
if (sbdsp_wdsp(sc, sc->sc_o.modep->cmd) < 0) {
|
|
DPRINTF(("sbdsp_dma_output: SB2 DMA start failed\n"));
|
|
goto giveup;
|
|
}
|
|
}
|
|
break;
|
|
case SB_PCMRUNNING:
|
|
/* Looping mode, nothing to do */
|
|
break;
|
|
}
|
|
return 0;
|
|
|
|
giveup:
|
|
sbdsp_reset(sc);
|
|
return EIO;
|
|
}
|
|
|
|
/*
|
|
* Only the DSP unit on the sound blaster generates interrupts.
|
|
* There are three cases of interrupt: reception of a midi byte
|
|
* (when mode is enabled), completion of dma transmission, or
|
|
* completion of a dma reception.
|
|
*
|
|
* If there is interrupt sharing or a spurious interrupt occurs
|
|
* there is no way to distinguish this on an SB2. So if you have
|
|
* an SB2 and experience problems, buy an SB16 (it's only $40).
|
|
*/
|
|
int
|
|
sbdsp_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct sbdsp_softc *sc = arg;
|
|
int loop = sc->sc_model != SB_1;
|
|
u_char irq;
|
|
|
|
#ifdef AUDIO_DEBUG
|
|
if (sbdspdebug > 1)
|
|
printf("sbdsp_intr: intr8=%p, intr16=%p\n",
|
|
sc->sc_intr8, sc->sc_intr16);
|
|
#endif
|
|
if (ISSB16CLASS(sc)) {
|
|
irq = sbdsp_mix_read(sc, SBP_IRQ_STATUS);
|
|
if ((irq & (SBP_IRQ_DMA8 | SBP_IRQ_DMA16)) == 0) {
|
|
DPRINTF(("sbdsp_intr: Spurious interrupt 0x%x\n", irq));
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (!loop && !isa_dmafinished(sc->sc_isa, sc->sc_drq8))
|
|
return 0;
|
|
irq = SBP_IRQ_DMA8;
|
|
}
|
|
sc->sc_interrupts++;
|
|
delay(10); /* XXX why? */
|
|
#if 0
|
|
if (sc->sc_mintr != 0) {
|
|
x = sbdsp_rdsp(sc);
|
|
(*sc->sc_mintr)(sc->sc_arg, x);
|
|
} else
|
|
#endif
|
|
if (sc->sc_intr8 == 0 && sc->sc_intr16 == 0) {
|
|
DPRINTF(("sbdsp_intr: Unexpected interrupt 0x%x\n", irq));
|
|
/* XXX return 0;*/ /* Did not expect an interrupt */
|
|
}
|
|
|
|
/* clear interrupt */
|
|
if (irq & SBP_IRQ_DMA8) {
|
|
bus_space_read_1(sc->sc_iot, sc->sc_ioh, SBP_DSP_IRQACK8);
|
|
if (!loop)
|
|
isa_dmadone(sc->sc_isa, sc->sc_drq8);
|
|
if (sc->sc_intr8)
|
|
(*sc->sc_intr8)(sc->sc_arg8);
|
|
}
|
|
if (irq & SBP_IRQ_DMA16) {
|
|
bus_space_read_1(sc->sc_iot, sc->sc_ioh, SBP_DSP_IRQACK16);
|
|
if (sc->sc_intr16)
|
|
(*sc->sc_intr16)(sc->sc_arg16);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Enter midi uart mode and arrange for read interrupts
|
|
* to vector to `intr'. This puts the card in a mode
|
|
* which allows only midi I/O; the card must be reset
|
|
* to leave this mode. Unfortunately, the card does not
|
|
* use transmit interrupts, so bytes must be output
|
|
* using polling. To keep the polling overhead to a
|
|
* minimum, output should be driven off a timer.
|
|
* This is a little tricky since only 320us separate
|
|
* consecutive midi bytes.
|
|
*/
|
|
void
|
|
sbdsp_set_midi_mode(sc, intr, arg)
|
|
struct sbdsp_softc *sc;
|
|
void (*intr)();
|
|
void *arg;
|
|
{
|
|
|
|
sbdsp_wdsp(sc, SB_MIDI_UART_INTR);
|
|
sc->sc_mintr = intr;
|
|
sc->sc_intr = 0;
|
|
sc->sc_arg = arg;
|
|
}
|
|
|
|
/*
|
|
* Write a byte to the midi port, when in midi uart mode.
|
|
*/
|
|
void
|
|
sbdsp_midi_output(sc, v)
|
|
struct sbdsp_softc *sc;
|
|
int v;
|
|
{
|
|
|
|
if (sbdsp_wdsp(sc, v) < 0)
|
|
++sberr.wmidi;
|
|
}
|
|
#endif
|
|
|
|
/* Mask a value 0-255, but round it first */
|
|
#define MAXVAL 256
|
|
static int
|
|
sbdsp_adjust(val, mask)
|
|
int val, mask;
|
|
{
|
|
val += (MAXVAL - mask) >> 1;
|
|
if (val >= MAXVAL)
|
|
val = MAXVAL-1;
|
|
return val & mask;
|
|
}
|
|
|
|
void
|
|
sbdsp_set_mixer_gain(sc, port)
|
|
struct sbdsp_softc *sc;
|
|
int port;
|
|
{
|
|
int src, gain;
|
|
|
|
switch(sc->sc_mixer_model) {
|
|
case SBM_NONE:
|
|
return;
|
|
case SBM_CT1335:
|
|
gain = SB_1335_GAIN(sc->gain[port][SB_LEFT]);
|
|
switch(port) {
|
|
case SB_MASTER_VOL:
|
|
src = SBP_1335_MASTER_VOL;
|
|
break;
|
|
case SB_MIDI_VOL:
|
|
src = SBP_1335_MIDI_VOL;
|
|
break;
|
|
case SB_CD_VOL:
|
|
src = SBP_1335_CD_VOL;
|
|
break;
|
|
case SB_VOICE_VOL:
|
|
src = SBP_1335_VOICE_VOL;
|
|
gain = SB_1335_MASTER_GAIN(sc->gain[port][SB_LEFT]);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
sbdsp_mix_write(sc, src, gain);
|
|
break;
|
|
case SBM_CT1345:
|
|
gain = SB_STEREO_GAIN(sc->gain[port][SB_LEFT],
|
|
sc->gain[port][SB_RIGHT]);
|
|
switch (port) {
|
|
case SB_MIC_VOL:
|
|
src = SBP_MIC_VOL;
|
|
gain = SB_MIC_GAIN(sc->gain[port][SB_LEFT]);
|
|
break;
|
|
case SB_MASTER_VOL:
|
|
src = SBP_MASTER_VOL;
|
|
break;
|
|
case SB_LINE_IN_VOL:
|
|
src = SBP_LINE_VOL;
|
|
break;
|
|
case SB_VOICE_VOL:
|
|
src = SBP_VOICE_VOL;
|
|
break;
|
|
case SB_MIDI_VOL:
|
|
src = SBP_MIDI_VOL;
|
|
break;
|
|
case SB_CD_VOL:
|
|
src = SBP_CD_VOL;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
sbdsp_mix_write(sc, src, gain);
|
|
break;
|
|
case SBM_CT1XX5:
|
|
case SBM_CT1745:
|
|
switch (port) {
|
|
case SB_MIC_VOL:
|
|
src = SB16P_MIC_L;
|
|
break;
|
|
case SB_MASTER_VOL:
|
|
src = SB16P_MASTER_L;
|
|
break;
|
|
case SB_LINE_IN_VOL:
|
|
src = SB16P_LINE_L;
|
|
break;
|
|
case SB_VOICE_VOL:
|
|
src = SB16P_VOICE_L;
|
|
break;
|
|
case SB_MIDI_VOL:
|
|
src = SB16P_MIDI_L;
|
|
break;
|
|
case SB_CD_VOL:
|
|
src = SB16P_CD_L;
|
|
break;
|
|
case SB_INPUT_GAIN:
|
|
src = SB16P_INPUT_GAIN_L;
|
|
break;
|
|
case SB_OUTPUT_GAIN:
|
|
src = SB16P_OUTPUT_GAIN_L;
|
|
break;
|
|
case SB_TREBLE:
|
|
src = SB16P_TREBLE_L;
|
|
break;
|
|
case SB_BASS:
|
|
src = SB16P_BASS_L;
|
|
break;
|
|
case SB_PCSPEAKER:
|
|
sbdsp_mix_write(sc, SB16P_PCSPEAKER, sc->gain[port][SB_LEFT]);
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
sbdsp_mix_write(sc, src, sc->gain[port][SB_LEFT]);
|
|
sbdsp_mix_write(sc, SB16P_L_TO_R(src), sc->gain[port][SB_RIGHT]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int
|
|
sbdsp_mixer_set_port(addr, cp)
|
|
void *addr;
|
|
mixer_ctrl_t *cp;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
int lgain, rgain;
|
|
int mask, bits;
|
|
int lmask, rmask, lbits, rbits;
|
|
int mute, swap;
|
|
|
|
DPRINTF(("sbdsp_mixer_set_port: port=%d num_channels=%d\n", cp->dev,
|
|
cp->un.value.num_channels));
|
|
|
|
if (sc->sc_mixer_model == SBM_NONE)
|
|
return EINVAL;
|
|
|
|
switch (cp->dev) {
|
|
case SB_TREBLE:
|
|
case SB_BASS:
|
|
if (sc->sc_mixer_model == SBM_CT1345 ||
|
|
sc->sc_mixer_model == SBM_CT1XX5) {
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return EINVAL;
|
|
switch (cp->dev) {
|
|
case SB_TREBLE:
|
|
sbdsp_set_ifilter(addr, cp->un.ord ? SB_TREBLE : 0);
|
|
return 0;
|
|
case SB_BASS:
|
|
sbdsp_set_ifilter(addr, cp->un.ord ? SB_BASS : 0);
|
|
return 0;
|
|
}
|
|
}
|
|
case SB_PCSPEAKER:
|
|
case SB_INPUT_GAIN:
|
|
case SB_OUTPUT_GAIN:
|
|
if (!ISSBM1745(sc))
|
|
return EINVAL;
|
|
case SB_MIC_VOL:
|
|
case SB_LINE_IN_VOL:
|
|
if (sc->sc_mixer_model == SBM_CT1335)
|
|
return EINVAL;
|
|
case SB_VOICE_VOL:
|
|
case SB_MIDI_VOL:
|
|
case SB_CD_VOL:
|
|
case SB_MASTER_VOL:
|
|
if (cp->type != AUDIO_MIXER_VALUE)
|
|
return EINVAL;
|
|
|
|
/*
|
|
* All the mixer ports are stereo except for the microphone.
|
|
* If we get a single-channel gain value passed in, then we
|
|
* duplicate it to both left and right channels.
|
|
*/
|
|
|
|
switch (cp->dev) {
|
|
case SB_MIC_VOL:
|
|
if (cp->un.value.num_channels != 1)
|
|
return EINVAL;
|
|
|
|
lgain = rgain = SB_ADJUST_MIC_GAIN(sc,
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
break;
|
|
case SB_PCSPEAKER:
|
|
if (cp->un.value.num_channels != 1)
|
|
return EINVAL;
|
|
/* fall into */
|
|
case SB_INPUT_GAIN:
|
|
case SB_OUTPUT_GAIN:
|
|
lgain = rgain = SB_ADJUST_2_GAIN(sc,
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
break;
|
|
default:
|
|
switch (cp->un.value.num_channels) {
|
|
case 1:
|
|
lgain = rgain = SB_ADJUST_GAIN(sc,
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO]);
|
|
break;
|
|
case 2:
|
|
if (sc->sc_mixer_model == SBM_CT1335)
|
|
return EINVAL;
|
|
lgain = SB_ADJUST_GAIN(sc,
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT]);
|
|
rgain = SB_ADJUST_GAIN(sc,
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT]);
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
sc->gain[cp->dev][SB_LEFT] = lgain;
|
|
sc->gain[cp->dev][SB_RIGHT] = rgain;
|
|
|
|
sbdsp_set_mixer_gain(sc, cp->dev);
|
|
break;
|
|
|
|
case SB_RECORD_SOURCE:
|
|
if (ISSBM1745(sc)) {
|
|
if (cp->type != AUDIO_MIXER_SET)
|
|
return EINVAL;
|
|
return sbdsp_set_in_ports(sc, cp->un.mask);
|
|
} else {
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return EINVAL;
|
|
sc->in_port = cp->un.ord;
|
|
return sbdsp_set_in_ports(sc, 1 << cp->un.ord);
|
|
}
|
|
break;
|
|
|
|
case SB_AGC:
|
|
if (!ISSBM1745(sc) || cp->type != AUDIO_MIXER_ENUM)
|
|
return EINVAL;
|
|
sbdsp_mix_write(sc, SB16P_AGC, cp->un.ord & 1);
|
|
break;
|
|
|
|
case SB_CD_OUT_MUTE:
|
|
mask = SB16P_SW_CD;
|
|
goto omute;
|
|
case SB_MIC_OUT_MUTE:
|
|
mask = SB16P_SW_MIC;
|
|
goto omute;
|
|
case SB_LINE_OUT_MUTE:
|
|
mask = SB16P_SW_LINE;
|
|
omute:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return EINVAL;
|
|
bits = sbdsp_mix_read(sc, SB16P_OSWITCH);
|
|
sc->gain[cp->dev][SB_LR] = cp->un.ord != 0;
|
|
if (cp->un.ord)
|
|
bits = bits & ~mask;
|
|
else
|
|
bits = bits | mask;
|
|
sbdsp_mix_write(sc, SB16P_OSWITCH, bits);
|
|
break;
|
|
|
|
case SB_MIC_IN_MUTE:
|
|
case SB_MIC_SWAP:
|
|
lmask = rmask = SB16P_SW_MIC;
|
|
goto imute;
|
|
case SB_CD_IN_MUTE:
|
|
case SB_CD_SWAP:
|
|
lmask = SB16P_SW_CD_L;
|
|
rmask = SB16P_SW_CD_R;
|
|
goto imute;
|
|
case SB_LINE_IN_MUTE:
|
|
case SB_LINE_SWAP:
|
|
lmask = SB16P_SW_LINE_L;
|
|
rmask = SB16P_SW_LINE_R;
|
|
goto imute;
|
|
case SB_MIDI_IN_MUTE:
|
|
case SB_MIDI_SWAP:
|
|
lmask = SB16P_SW_MIDI_L;
|
|
rmask = SB16P_SW_MIDI_R;
|
|
imute:
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
return EINVAL;
|
|
mask = lmask | rmask;
|
|
lbits = sbdsp_mix_read(sc, SB16P_ISWITCH_L) & ~mask;
|
|
rbits = sbdsp_mix_read(sc, SB16P_ISWITCH_R) & ~mask;
|
|
sc->gain[cp->dev][SB_LR] = cp->un.ord != 0;
|
|
if (SB_IS_IN_MUTE(cp->dev)) {
|
|
mute = cp->dev;
|
|
swap = mute - SB_CD_IN_MUTE + SB_CD_SWAP;
|
|
} else {
|
|
swap = cp->dev;
|
|
mute = swap + SB_CD_IN_MUTE - SB_CD_SWAP;
|
|
}
|
|
if (sc->gain[swap][SB_LR]) {
|
|
mask = lmask;
|
|
lmask = rmask;
|
|
rmask = mask;
|
|
}
|
|
if (!sc->gain[mute][SB_LR]) {
|
|
lbits = lbits | lmask;
|
|
rbits = rbits | rmask;
|
|
}
|
|
sbdsp_mix_write(sc, SB16P_ISWITCH_L, lbits);
|
|
sbdsp_mix_write(sc, SB16P_ISWITCH_L, rbits);
|
|
break;
|
|
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_mixer_get_port(addr, cp)
|
|
void *addr;
|
|
mixer_ctrl_t *cp;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
DPRINTF(("sbdsp_mixer_get_port: port=%d\n", cp->dev));
|
|
|
|
if (sc->sc_mixer_model == SBM_NONE)
|
|
return EINVAL;
|
|
|
|
switch (cp->dev) {
|
|
case SB_TREBLE:
|
|
case SB_BASS:
|
|
if (sc->sc_mixer_model == SBM_CT1345 ||
|
|
sc->sc_mixer_model == SBM_CT1XX5) {
|
|
switch (cp->dev) {
|
|
case SB_TREBLE:
|
|
cp->un.ord = sbdsp_get_ifilter(addr) == SB_TREBLE;
|
|
return 0;
|
|
case SB_BASS:
|
|
cp->un.ord = sbdsp_get_ifilter(addr) == SB_BASS;
|
|
return 0;
|
|
}
|
|
}
|
|
case SB_PCSPEAKER:
|
|
case SB_INPUT_GAIN:
|
|
case SB_OUTPUT_GAIN:
|
|
if (!ISSBM1745(sc))
|
|
return EINVAL;
|
|
case SB_MIC_VOL:
|
|
case SB_LINE_IN_VOL:
|
|
if (sc->sc_mixer_model == SBM_CT1335)
|
|
return EINVAL;
|
|
case SB_VOICE_VOL:
|
|
case SB_MIDI_VOL:
|
|
case SB_CD_VOL:
|
|
case SB_MASTER_VOL:
|
|
switch (cp->dev) {
|
|
case SB_MIC_VOL:
|
|
case SB_PCSPEAKER:
|
|
if (cp->un.value.num_channels != 1)
|
|
return EINVAL;
|
|
/* fall into */
|
|
default:
|
|
switch (cp->un.value.num_channels) {
|
|
case 1:
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] =
|
|
sc->gain[cp->dev][SB_LEFT];
|
|
break;
|
|
case 2:
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] =
|
|
sc->gain[cp->dev][SB_LEFT];
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] =
|
|
sc->gain[cp->dev][SB_RIGHT];
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case SB_RECORD_SOURCE:
|
|
if (ISSBM1745(sc))
|
|
cp->un.mask = sc->in_mask;
|
|
else
|
|
cp->un.ord = sc->in_port;
|
|
break;
|
|
|
|
case SB_AGC:
|
|
if (!ISSBM1745(sc))
|
|
return EINVAL;
|
|
cp->un.ord = sbdsp_mix_read(sc, SB16P_AGC);
|
|
break;
|
|
|
|
case SB_CD_IN_MUTE:
|
|
case SB_MIC_IN_MUTE:
|
|
case SB_LINE_IN_MUTE:
|
|
case SB_MIDI_IN_MUTE:
|
|
case SB_CD_SWAP:
|
|
case SB_MIC_SWAP:
|
|
case SB_LINE_SWAP:
|
|
case SB_MIDI_SWAP:
|
|
case SB_CD_OUT_MUTE:
|
|
case SB_MIC_OUT_MUTE:
|
|
case SB_LINE_OUT_MUTE:
|
|
cp->un.ord = sc->gain[cp->dev][SB_LR];
|
|
break;
|
|
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
sbdsp_mixer_query_devinfo(addr, dip)
|
|
void *addr;
|
|
mixer_devinfo_t *dip;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
int chan, class, is1745;
|
|
|
|
DPRINTF(("sbdsp_mixer_query_devinfo: model=%d index=%d\n",
|
|
sc->sc_mixer_model, dip->index));
|
|
|
|
if (sc->sc_mixer_model == SBM_NONE)
|
|
return ENXIO;
|
|
|
|
chan = sc->sc_mixer_model == SBM_CT1335 ? 1 : 2;
|
|
is1745 = ISSBM1745(sc);
|
|
class = is1745 ? SB_INPUT_CLASS : SB_OUTPUT_CLASS;
|
|
|
|
switch (dip->index) {
|
|
case SB_MASTER_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmaster);
|
|
dip->un.v.num_channels = chan;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
case SB_MIDI_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = class;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = is1745 ? SB_MIDI_IN_MUTE : AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNfmsynth);
|
|
dip->un.v.num_channels = chan;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
case SB_CD_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = class;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = is1745 ? SB_CD_IN_MUTE : AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNcd);
|
|
dip->un.v.num_channels = chan;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
case SB_VOICE_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = class;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNdac);
|
|
dip->un.v.num_channels = chan;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
case SB_OUTPUT_CLASS:
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCoutputs);
|
|
return 0;
|
|
}
|
|
|
|
if (sc->sc_mixer_model == SBM_CT1335)
|
|
return ENXIO;
|
|
|
|
switch (dip->index) {
|
|
case SB_MIC_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = class;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = is1745 ? SB_MIC_IN_MUTE : AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNmicrophone);
|
|
dip->un.v.num_channels = 1;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
|
|
case SB_LINE_IN_VOL:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = class;
|
|
dip->prev = AUDIO_MIXER_LAST;
|
|
dip->next = is1745 ? SB_LINE_IN_MUTE : AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNline);
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
|
|
case SB_RECORD_SOURCE:
|
|
dip->mixer_class = SB_RECORD_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNsource);
|
|
if (ISSBM1745(sc)) {
|
|
dip->type = AUDIO_MIXER_SET;
|
|
dip->un.s.num_mem = 4;
|
|
strcpy(dip->un.s.member[0].label.name, AudioNmicrophone);
|
|
dip->un.s.member[0].mask = 1 << SB_MIC_VOL;
|
|
strcpy(dip->un.s.member[1].label.name, AudioNcd);
|
|
dip->un.s.member[1].mask = 1 << SB_CD_VOL;
|
|
strcpy(dip->un.s.member[2].label.name, AudioNline);
|
|
dip->un.s.member[2].mask = 1 << SB_LINE_IN_VOL;
|
|
strcpy(dip->un.s.member[3].label.name, AudioNfmsynth);
|
|
dip->un.s.member[3].mask = 1 << SB_MIDI_VOL;
|
|
} else {
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 3;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNmicrophone);
|
|
dip->un.e.member[0].ord = SB_MIC_VOL;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNcd);
|
|
dip->un.e.member[1].ord = SB_CD_VOL;
|
|
strcpy(dip->un.e.member[2].label.name, AudioNline);
|
|
dip->un.e.member[2].ord = SB_LINE_IN_VOL;
|
|
}
|
|
return 0;
|
|
|
|
case SB_BASS:
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNbass);
|
|
if (sc->sc_mixer_model == SBM_CT1745) {
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_EQUALIZATION_CLASS;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNbass);
|
|
} else {
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
}
|
|
return 0;
|
|
|
|
case SB_TREBLE:
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNtreble);
|
|
if (sc->sc_mixer_model == SBM_CT1745) {
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_EQUALIZATION_CLASS;
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNtreble);
|
|
} else {
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
}
|
|
return 0;
|
|
|
|
case SB_RECORD_CLASS: /* record source class */
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
dip->mixer_class = SB_RECORD_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCrecord);
|
|
return 0;
|
|
|
|
case SB_INPUT_CLASS:
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCinputs);
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (sc->sc_mixer_model == SBM_CT1345)
|
|
return ENXIO;
|
|
|
|
switch(dip->index) {
|
|
case SB_PCSPEAKER:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "pc_speaker");
|
|
dip->un.v.num_channels = 1;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
|
|
case SB_INPUT_GAIN:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNinput);
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
|
|
case SB_OUTPUT_GAIN:
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioNoutput);
|
|
dip->un.v.num_channels = 2;
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
return 0;
|
|
|
|
case SB_AGC:
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, "AGC");
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
return 0;
|
|
|
|
case SB_EQUALIZATION_CLASS:
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
dip->mixer_class = SB_EQUALIZATION_CLASS;
|
|
dip->next = dip->prev = AUDIO_MIXER_LAST;
|
|
strcpy(dip->label.name, AudioCequalization);
|
|
return 0;
|
|
|
|
case SB_CD_IN_MUTE:
|
|
dip->prev = SB_CD_VOL;
|
|
dip->next = SB_CD_SWAP;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_MIC_IN_MUTE:
|
|
dip->prev = SB_MIC_VOL;
|
|
dip->next = SB_MIC_SWAP;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_LINE_IN_MUTE:
|
|
dip->prev = SB_LINE_IN_VOL;
|
|
dip->next = SB_LINE_SWAP;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_MIDI_IN_MUTE:
|
|
dip->prev = SB_MIDI_VOL;
|
|
dip->next = SB_MIDI_SWAP;
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_CD_SWAP:
|
|
dip->prev = SB_CD_IN_MUTE;
|
|
dip->next = SB_CD_OUT_MUTE;
|
|
goto swap;
|
|
|
|
case SB_MIC_SWAP:
|
|
dip->prev = SB_MIC_IN_MUTE;
|
|
dip->next = SB_MIC_OUT_MUTE;
|
|
goto swap;
|
|
|
|
case SB_LINE_SWAP:
|
|
dip->prev = SB_LINE_IN_MUTE;
|
|
dip->next = SB_LINE_OUT_MUTE;
|
|
goto swap;
|
|
|
|
case SB_MIDI_SWAP:
|
|
dip->prev = SB_MIDI_IN_MUTE;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
swap:
|
|
dip->mixer_class = SB_INPUT_CLASS;
|
|
strcpy(dip->label.name, AudioNswap);
|
|
goto mute1;
|
|
|
|
case SB_CD_OUT_MUTE:
|
|
dip->prev = SB_CD_SWAP;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_MIC_OUT_MUTE:
|
|
dip->prev = SB_MIC_SWAP;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
goto mute;
|
|
|
|
case SB_LINE_OUT_MUTE:
|
|
dip->prev = SB_LINE_SWAP;
|
|
dip->next = AUDIO_MIXER_LAST;
|
|
dip->mixer_class = SB_OUTPUT_CLASS;
|
|
mute:
|
|
strcpy(dip->label.name, AudioNmute);
|
|
mute1:
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
dip->un.e.num_mem = 2;
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
dip->un.e.member[0].ord = 0;
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
dip->un.e.member[1].ord = 1;
|
|
return 0;
|
|
|
|
}
|
|
|
|
return ENXIO;
|
|
}
|
|
|
|
void *
|
|
sb_malloc(addr, size, pool, flags)
|
|
void *addr;
|
|
unsigned long size;
|
|
int pool;
|
|
int flags;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
|
|
return isa_malloc(sc->sc_isa, 4, size, pool, flags);
|
|
}
|
|
|
|
void
|
|
sb_free(addr, ptr, pool)
|
|
void *addr;
|
|
void *ptr;
|
|
int pool;
|
|
{
|
|
isa_free(ptr, pool);
|
|
}
|
|
|
|
unsigned long
|
|
sb_round(addr, size)
|
|
void *addr;
|
|
unsigned long size;
|
|
{
|
|
if (size > MAX_ISADMA)
|
|
size = MAX_ISADMA;
|
|
return size;
|
|
}
|
|
|
|
int
|
|
sb_mappage(addr, mem, off, prot)
|
|
void *addr;
|
|
void *mem;
|
|
int off;
|
|
int prot;
|
|
{
|
|
return isa_mappage(mem, off, prot);
|
|
}
|
|
|
|
int
|
|
sbdsp_get_props(addr)
|
|
void *addr;
|
|
{
|
|
struct sbdsp_softc *sc = addr;
|
|
return AUDIO_PROP_MMAP |
|
|
(sc->sc_fullduplex ? AUDIO_PROP_FULLDUPLEX : 0);
|
|
}
|