NetBSD/sys/dev/scsipi/atapi_base.c

224 lines
6.6 KiB
C

/* $NetBSD: atapi_base.c,v 1.26 2005/12/11 12:23:50 christos Exp $ */
/*-
* Copyright (c) 1998, 1999, 2004 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum; by Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: atapi_base.c,v 1.26 2005/12/11 12:23:50 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/buf.h>
#include <sys/uio.h>
#include <sys/malloc.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsipiconf.h>
#include <dev/scsipi/atapiconf.h>
#include <dev/scsipi/scsipi_base.h>
/*
* Look at the returned sense and act on the error, determining
* the unix error number to pass back. (0 = report no error)
*
* THIS IS THE DEFAULT ERROR HANDLER
*/
int
atapi_interpret_sense(struct scsipi_xfer *xs)
{
struct scsipi_periph *periph = xs->xs_periph;
int key, error;
const char *msg = NULL;
/*
* If the device has it's own error handler, call it first.
* If it returns a legit error value, return that, otherwise
* it wants us to continue with normal error processing.
*/
if (periph->periph_switch->psw_error != NULL) {
SC_DEBUG(periph, SCSIPI_DB2,
("calling private err_handler()\n"));
error = (*periph->periph_switch->psw_error)(xs);
if (error != EJUSTRETURN)
return (error);
}
/*
* otherwise use the default, call the generic sense handler if we have
* more than the sense key
*/
if (xs->error == XS_SENSE)
return (scsipi_interpret_sense(xs));
key = (xs->sense.atapi_sense & 0xf0) >> 4;
switch (key) {
case SKEY_RECOVERED_ERROR:
msg = "soft error (corrected)";
case SKEY_NO_SENSE:
if (xs->resid == xs->datalen)
xs->resid = 0; /* not short read */
error = 0;
break;
case SKEY_NOT_READY:
if ((periph->periph_flags & PERIPH_REMOVABLE) != 0)
periph->periph_flags &= ~PERIPH_MEDIA_LOADED;
if ((xs->xs_control & XS_CTL_IGNORE_NOT_READY) != 0)
return (0);
if ((xs->xs_control & XS_CTL_SILENT) != 0)
return (EIO);
msg = "not ready";
error = EIO;
break;
case SKEY_MEDIUM_ERROR: /* MEDIUM ERROR */
msg = "medium error";
error = EIO;
break;
case SKEY_HARDWARE_ERROR:
msg = "non-media hardware failure";
error = EIO;
break;
case SKEY_ILLEGAL_REQUEST:
if ((xs->xs_control &
XS_CTL_IGNORE_ILLEGAL_REQUEST) != 0)
return (0);
if ((xs->xs_control & XS_CTL_SILENT) != 0)
return (EIO);
msg = "illegal request";
error = EINVAL;
break;
case SKEY_UNIT_ATTENTION:
if ((periph->periph_flags & PERIPH_REMOVABLE) != 0)
periph->periph_flags &= ~PERIPH_MEDIA_LOADED;
if ((xs->xs_control &
XS_CTL_IGNORE_MEDIA_CHANGE) != 0 ||
/* XXX Should reupload any transient state. */
(periph->periph_flags & PERIPH_REMOVABLE) == 0)
return (ERESTART);
if ((xs->xs_control & XS_CTL_SILENT) != 0)
return (EIO);
msg = "unit attention";
error = EIO;
break;
case SKEY_DATA_PROTECT:
msg = "readonly device";
error = EROFS;
break;
case SKEY_ABORTED_COMMAND:
msg = "command aborted";
if (xs->xs_retries != 0) {
xs->xs_retries--;
error = ERESTART;
} else
error = EIO;
break;
default:
error = EIO;
break;
}
if (!key) {
if (xs->sense.atapi_sense & 0x01) {
/* Illegal length indication */
msg = "ATA illegal length indication";
error = EIO;
}
if (xs->sense.atapi_sense & 0x02) { /* vol overflow */
msg = "ATA volume overflow";
error = ENOSPC;
}
if (xs->sense.atapi_sense & 0x04) { /* Aborted command */
msg = "ATA command aborted";
if (xs->xs_retries != 0) {
xs->xs_retries--;
error = ERESTART;
} else
error = EIO;
}
}
if (msg) {
scsipi_printaddr(periph);
printf("%s\n", msg);
} else {
if (error) {
scsipi_printaddr(periph);
printf("unknown error code %d\n",
xs->sense.atapi_sense);
}
}
return (error);
}
/*
* Utility routines often used in SCSI stuff
*/
/*
* Print out the scsi_link structure's address info.
*/
void
atapi_print_addr(struct scsipi_periph *periph)
{
struct scsipi_channel *chan = periph->periph_channel;
struct scsipi_adapter *adapt = chan->chan_adapter;
printf("%s(%s:%d:%d): ", periph->periph_dev != NULL ?
periph->periph_dev->dv_xname : "probe",
adapt->adapt_dev->dv_xname,
chan->chan_channel, periph->periph_target);
}
/*
* ask the atapi driver to perform a command for us.
* tell it where to read/write the data, and how
* long the data is supposed to be. If we have a buf
* to associate with the transfer, we need that too.
*/
void
atapi_scsipi_cmd(struct scsipi_xfer *xs)
{
struct scsipi_periph *periph = xs->xs_periph;
SC_DEBUG(periph, SCSIPI_DB2, ("atapi_cmd\n"));
xs->cmdlen = (periph->periph_cap & PERIPH_CAP_CMD16) ? 16 : 12;
}