306 lines
10 KiB
Plaintext
306 lines
10 KiB
Plaintext
# $NetBSD: GENERIC3X,v 1.96 2007/07/18 15:48:49 tsutsui Exp $
|
|
|
|
# GENERIC Sun3X (3/80, 3/470)
|
|
# Supports root on: ie0, le0, sd*, ...
|
|
|
|
include "arch/sun3/conf/std.sun3x"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC3X-$Revision: 1.96 $"
|
|
|
|
# Machines to be supported by this kernel
|
|
#options FPU_EMULATE # XXX - Ever needed?
|
|
#options HAVE_IOCACHE # XXX - Not yet supported.
|
|
|
|
# Needs to be set per system. i.e change these as you see fit
|
|
maxusers 4
|
|
|
|
# Standard system options
|
|
options KTRACE # system call tracing
|
|
#options SYSTRACE # system call vetting via systrace(1)
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V shared memory
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
|
|
options LKM # loadable kernel modules
|
|
#options INSECURE # disable kernel security level
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
# Which kernel debugger? Uncomment either this:
|
|
options DDB
|
|
# ... or these for KGDB (gdb remote target)
|
|
#makeoptions DEBUG="-g" # debugging symbols for gdb
|
|
#options KGDB
|
|
#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01
|
|
|
|
# Other debugging options
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options DEBUG # kernel debugging code
|
|
#options DIAGNOSTIC # extra kernel sanity checking
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
#options PMAP_DEBUG
|
|
#options SCSIDEBUG
|
|
#options SCSIVERBOSE # Verbose SCSI errors
|
|
|
|
# Compatibility options
|
|
options COMPAT_SUNOS # can run SunOS 4.1.1 executables
|
|
#options COMPAT_SVR4 # can run SVR4 executables
|
|
options COMPAT_43 # and 4.3BSD and ...
|
|
options COMPAT_10 # NetBSD 1.0
|
|
options COMPAT_11 # NetBSD 1.1
|
|
options COMPAT_12 # NetBSD 1.2
|
|
options COMPAT_13 # NetBSD 1.3
|
|
options COMPAT_14 # NetBSD 1.4
|
|
options COMPAT_15 # NetBSD 1.5
|
|
options COMPAT_16 # NetBSD 1.6
|
|
options COMPAT_20 # NetBSD 2.0
|
|
options COMPAT_30 # NetBSD 3.0
|
|
options COMPAT_40 # NetBSD 4.0 compatibility.
|
|
options COMPAT_AOUT_M68K # support for NetBSD a.out executables
|
|
#options COMPAT_LINUX # can run Linux/m68k executables
|
|
options EXEC_AOUT # support for a.out executables
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# Filesystem options
|
|
file-system FFS # Berkeley Fast Filesystem
|
|
file-system NFS # Sun NFS client support
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS FAT file system
|
|
file-system FDESC # /dev/fd/*
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PROCFS # /proc
|
|
file-system UNION # union file system
|
|
file-system MFS # memory-based filesystem
|
|
file-system PTYFS # /dev/pts/N support
|
|
#file-system TMPFS # Efficient memory file-system
|
|
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
|
|
|
options NFSSERVER # nfs server support
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
options SOFTDEP # FFS soft updates support.
|
|
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
|
|
# Networking options
|
|
options INET # IP protocol stack support
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options GATEWAY # IP packet forwarding
|
|
#options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks.
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# Work-around for root on slow servers (insurance...)
|
|
options NFS_BOOT_RWSIZE=1024
|
|
options NFS_BOOT_BOOTPARAM
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
# On-board I/O space (required)
|
|
include "arch/sun3/conf/obio.sun3x"
|
|
|
|
# On-board memory (optional)
|
|
# See frame-buffers
|
|
obmem0 at mainbus?
|
|
|
|
# VME bus support (optional)
|
|
# One unit for each address space
|
|
vme0 at mainbus? # A16/D16
|
|
vme1 at mainbus? # A16/D32
|
|
vme2 at mainbus? # A24/D16
|
|
vme3 at mainbus? # A24/D32
|
|
vme4 at mainbus? # A32/D16
|
|
vme5 at mainbus? # A32/D32
|
|
|
|
#
|
|
# Serial ports
|
|
#
|
|
zstty0 at zsc1 channel 0 # ttya
|
|
zstty1 at zsc1 channel 1 # ttyb
|
|
|
|
kbd0 at zsc0 channel 0 # keyboard
|
|
ms0 at zsc0 channel 1 # mouse
|
|
|
|
#
|
|
# Network devices
|
|
#
|
|
|
|
# Intel Ethernet (onboard, or VME)
|
|
ie0 at obio0 addr 0x65000000 ipl 3
|
|
ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
|
|
|
|
# Lance Ethernet (only onboard)
|
|
le0 at obio0 addr 0x65002000 ipl 3
|
|
|
|
#
|
|
# Disk and tape devices
|
|
#
|
|
|
|
# Emulex SCSI (3/80 only)
|
|
# Both `dma' and `esp' are needed.
|
|
# The following flags may be set for the NCR53c94 based esp driver:
|
|
# bits 0-7: disable disconnect/reselect for the corresponding target
|
|
# bits 8-15: disable synchronous negotiation for target [bit-8]
|
|
#
|
|
dma0 at obio0 addr 0x66001000 ipl 2
|
|
esp0 at obio0 addr 0x66000000 ipl 2 flags 0x000000
|
|
|
|
# Floppy drive
|
|
fdc0 at obio0 addr 0x6e000000 ipl 6 vect 0x40
|
|
fd0 at fdc0 # First (and only) floppy drive.
|
|
|
|
# Sun3 "si" SCSI controller (NCR 5380)
|
|
# This driver has several flags which may be enabled using
|
|
# the "flags" directive. Valid flags are:
|
|
#
|
|
# 0x000ff Set (1<<target) to disable disconnect/reselect
|
|
# 0x0ff00 Set (1<<(target+8)) to disable parity checking
|
|
# 0x10000 Set this bit to disable DMA interrupts (poll)
|
|
# 0x20000 Set this bit to disable DMA entirely (use PIO)
|
|
#
|
|
# For example: "flags 0x1000f" would disable DMA interrupts,
|
|
# and disable disconnect/reselect for targets 0-3
|
|
si0 at vme2 addr 0x200000 ipl 2 vect 0x40
|
|
si1 at vme2 addr 0x204000 ipl 2 vect 0x41
|
|
|
|
# Xylogics 450/451 controllers (VME A16/D16)
|
|
xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
|
|
xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
|
|
xy* at xyc? drive ?
|
|
|
|
# Xylogics 7053 controllers (VME A16/D32)
|
|
xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
|
|
xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
|
|
xd* at xdc? drive ?
|
|
|
|
# Xylogics 472 tape controllers?
|
|
|
|
#
|
|
# Frame buffer devices
|
|
#
|
|
|
|
# P4 Monochrome frame buffer.
|
|
bwtwo0 at obmem0 addr 0x50300000
|
|
|
|
# P4 8-bit color frame buffer
|
|
cgfour0 at obmem0 addr 0x50300000
|
|
|
|
# P4 accelerated 8-bit color frame buffer
|
|
# cgsix0 at obmem0 addr 0x50000000
|
|
|
|
# P4 24-bit color frame buffer
|
|
# cgeight0 at obmem0 addr 0x50300000
|
|
|
|
# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
|
|
# This driver is going to need work in its mmap function.
|
|
# cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
|
|
|
|
# Support for the CG9 24-bit frame buffer (VME A32/D32).
|
|
# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
|
|
|
|
#
|
|
# SCSI infrastructure
|
|
#
|
|
scsibus* at scsi?
|
|
|
|
sd* at scsibus? target ? lun ? # SCSI disks
|
|
st* at scsibus? target ? lun ? # SCSI tapes
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
|
ch* at scsibus? target ? lun ? # SCSI changer devices
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
uk* at scsibus? target ? lun ? # unknown SCSI devices
|
|
|
|
# Memory-disk drivers
|
|
pseudo-device md 2
|
|
|
|
# Misc.
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device bpfilter # packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
pseudo-device sl # CSLIP
|
|
pseudo-device ppp # PPP
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device tun # network tunneling over tty
|
|
pseudo-device tap # virtual Ethernet
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device ipfilter # ip filter
|
|
pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
pseudo-device agr # IEEE 802.3ad link aggregation
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device vnd # paging to files
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
#pseudo-device ccd 4 # concatenated disks
|
|
#pseudo-device cgd 4 # cryptographic disk devices
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device fss 4 # file system snapshot device
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device ksyms # /dev/ksyms
|
|
#pseudo-device pf # PF packet filter
|
|
#pseudo-device pflog # PF log if
|
|
|
|
# Veriexec
|
|
#
|
|
# a pseudo device needed for veriexec
|
|
#pseudo-device veriexec 1
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|