478 lines
15 KiB
C
478 lines
15 KiB
C
/* $NetBSD: ite_rt.c,v 1.12 1995/02/16 21:57:45 chopps Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1993 Markus Wild
|
|
* Copyright (c) 1993 Lutz Vieweg
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Lutz Vieweg.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#include "grfrt.h"
|
|
#if NGRFRT > 0
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/systm.h>
|
|
#include <dev/cons.h>
|
|
#include <machine/cpu.h>
|
|
#include <amiga/amiga/device.h>
|
|
#include <amiga/dev/itevar.h>
|
|
#include <amiga/dev/grfioctl.h>
|
|
#include <amiga/dev/grfvar.h>
|
|
#include <amiga/dev/grf_rtreg.h>
|
|
|
|
int retina_console = 1;
|
|
|
|
void retina_cursor __P((struct ite_softc *,int));
|
|
void retina_scroll __P((struct ite_softc *,int,int,int,int));
|
|
void retina_deinit __P((struct ite_softc *));
|
|
void retina_clear __P((struct ite_softc *,int,int,int,int));
|
|
void retina_putc __P((struct ite_softc *,int,int,int,int));
|
|
void retina_init __P((struct ite_softc *));
|
|
|
|
/*
|
|
* this function is called from grf_rt to init the grf_softc->g_conpri
|
|
* field each time a retina is attached.
|
|
*/
|
|
int
|
|
grfrt_cnprobe()
|
|
{
|
|
static int done;
|
|
int rv;
|
|
|
|
if (retina_console && done == 0)
|
|
rv = CN_INTERNAL;
|
|
else
|
|
rv = CN_NORMAL;
|
|
done = 1;
|
|
return(rv);
|
|
}
|
|
|
|
/*
|
|
* init the required fields in the grf_softc struct for a
|
|
* grf to function as an ite.
|
|
*/
|
|
void
|
|
grfrt_iteinit(gp)
|
|
struct grf_softc *gp;
|
|
{
|
|
gp->g_iteinit = retina_init;
|
|
gp->g_itedeinit = retina_deinit;
|
|
gp->g_iteclear = retina_clear;
|
|
gp->g_iteputc = retina_putc;
|
|
gp->g_itescroll = retina_scroll;
|
|
gp->g_itecursor = retina_cursor;
|
|
}
|
|
|
|
void
|
|
retina_init(ip)
|
|
struct ite_softc *ip;
|
|
{
|
|
struct MonDef *md;
|
|
|
|
ip->priv = ip->grf->g_data;
|
|
md = (struct MonDef *) ip->priv;
|
|
|
|
ip->cols = md->TX;
|
|
ip->rows = md->TY;
|
|
}
|
|
|
|
|
|
void retina_cursor(struct ite_softc *ip, int flag)
|
|
{
|
|
volatile u_char *ba = ip->grf->g_regkva;
|
|
|
|
if (flag == ERASE_CURSOR)
|
|
{
|
|
/* disable cursor */
|
|
WCrt (ba, CRT_ID_CURSOR_START, RCrt (ba, CRT_ID_CURSOR_START) | 0x20);
|
|
}
|
|
else
|
|
{
|
|
int pos = ip->curx + ip->cury * ip->cols;
|
|
|
|
/* make sure to enable cursor */
|
|
WCrt (ba, CRT_ID_CURSOR_START, RCrt (ba, CRT_ID_CURSOR_START) & ~0x20);
|
|
|
|
/* and position it */
|
|
WCrt (ba, CRT_ID_CURSOR_LOC_HIGH, (u_char) (pos >> 8));
|
|
WCrt (ba, CRT_ID_CURSOR_LOC_LOW, (u_char) pos);
|
|
|
|
ip->cursorx = ip->curx;
|
|
ip->cursory = ip->cury;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
static void screen_up (struct ite_softc *ip, int top, int bottom, int lines)
|
|
{
|
|
volatile u_char * ba = ip->grf->g_regkva;
|
|
volatile u_char * fb = ip->grf->g_fbkva;
|
|
const struct MonDef * md = (struct MonDef *) ip->priv;
|
|
#ifdef BANKEDDEVPAGER
|
|
int bank;
|
|
#endif
|
|
|
|
/* do some bounds-checking here.. */
|
|
if (top >= bottom)
|
|
return;
|
|
|
|
if (top + lines >= bottom)
|
|
{
|
|
retina_clear (ip, top, 0, bottom - top, ip->cols);
|
|
return;
|
|
}
|
|
|
|
|
|
#ifdef BANKEDDEVPAGER
|
|
/* make sure to save/restore active bank (and if it's only
|
|
for tests of the feature in text-mode..) */
|
|
bank = (RSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO)
|
|
| (RSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI) << 8));
|
|
#endif
|
|
|
|
/* the trick here is to use a feature of the NCR chip. It can
|
|
optimize data access in various read/write modes. One of
|
|
the modes is able to read/write from/to different zones.
|
|
|
|
Thus, by setting the read-offset to lineN, and the write-offset
|
|
to line0, we just cause read/write cycles for all characters
|
|
up to the last line, and have the chip transfer the data. The
|
|
`addqb' are the cheapest way to cause read/write cycles (DONT
|
|
use `tas' on the Amiga!), their results are completely ignored
|
|
by the NCR chip, it just replicates what it just read. */
|
|
|
|
/* write to primary, read from secondary */
|
|
WSeq (ba, SEQ_ID_EXTENDED_MEM_ENA, (RSeq(ba, SEQ_ID_EXTENDED_MEM_ENA) & 0x1f) | 0 );
|
|
/* clear extended chain4 mode */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR, RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) & ~0x02);
|
|
|
|
/* set write mode 1, "[...] data in the read latches is written
|
|
to memory during CPU memory write cycles. [...]" */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 1);
|
|
|
|
{
|
|
/* write to line TOP */
|
|
long toploc = top * (md->TX / 16);
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, ((unsigned char)toploc));
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, ((unsigned char)(toploc >> 8)));
|
|
}
|
|
{
|
|
/* read from line TOP + LINES */
|
|
long fromloc = (top+lines) * (md->TX / 16);
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_LO, ((unsigned char)fromloc)) ;
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_HI, ((unsigned char)(fromloc >> 8))) ;
|
|
}
|
|
{
|
|
unsigned char * p = (unsigned char *) fb;
|
|
/* transfer all characters but LINES lines, unroll by 16 */
|
|
short x = (1 + bottom - (top + lines)) * (md->TX / 16) - 1;
|
|
do {
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@+" : "=a" (p) : "0" (p));
|
|
} while (x--);
|
|
}
|
|
|
|
/* reset to default values */
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_HI, 0);
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_LO, 0);
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, 0);
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, 0);
|
|
/* write mode 0 */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 0);
|
|
/* extended chain4 enable */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR , RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) | 0x02);
|
|
/* read/write to primary on A0, secondary on B0 */
|
|
WSeq (ba, SEQ_ID_EXTENDED_MEM_ENA, (RSeq(ba, SEQ_ID_EXTENDED_MEM_ENA) & 0x1f) | 0x40 );
|
|
|
|
|
|
/* fill the free lines with spaces */
|
|
|
|
{ /* feed latches with value */
|
|
unsigned short * f = (unsigned short *) fb;
|
|
|
|
f += (1 + bottom - lines) * md->TX * 2;
|
|
*f = 0x2010;
|
|
{
|
|
volatile unsigned short dummy = *((volatile unsigned short *)f);
|
|
}
|
|
}
|
|
|
|
/* clear extended chain4 mode */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR, RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) & ~0x02);
|
|
/* set write mode 1, "[...] data in the read latches is written
|
|
to memory during CPU memory write cycles. [...]" */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 1);
|
|
|
|
{
|
|
unsigned long * p = (unsigned long *) fb;
|
|
short x = (lines * (md->TX/16)) - 1;
|
|
const unsigned long dummyval = 0;
|
|
|
|
p += (1 + bottom - lines) * (md->TX/4);
|
|
|
|
do {
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
} while (x--);
|
|
}
|
|
|
|
/* write mode 0 */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 0);
|
|
/* extended chain4 enable */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR , RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) | 0x02);
|
|
|
|
#ifdef BANKEDDEVPAGER
|
|
/* restore former bank */
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, (unsigned char) bank);
|
|
bank >>= 8;
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, (unsigned char) bank);
|
|
#endif
|
|
};
|
|
|
|
static void screen_down (struct ite_softc *ip, int top, int bottom, int lines)
|
|
{
|
|
volatile u_char * ba = ip->grf->g_regkva;
|
|
volatile u_char * fb = ip->grf->g_fbkva;
|
|
const struct MonDef * md = (struct MonDef *) ip->priv;
|
|
#ifdef BANKEDDEVPAGER
|
|
int bank;
|
|
#endif
|
|
|
|
/* do some bounds-checking here.. */
|
|
if (top >= bottom)
|
|
return;
|
|
|
|
if (top + lines >= bottom)
|
|
{
|
|
retina_clear (ip, top, 0, bottom - top, ip->cols);
|
|
return;
|
|
}
|
|
|
|
#ifdef BANKEDDEVPAGER
|
|
/* make sure to save/restore active bank (and if it's only
|
|
for tests of the feature in text-mode..) */
|
|
bank = (RSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO)
|
|
| (RSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI) << 8));
|
|
#endif
|
|
/* see screen_up() for explanation of chip-tricks */
|
|
|
|
/* write to primary, read from secondary */
|
|
WSeq (ba, SEQ_ID_EXTENDED_MEM_ENA, (RSeq(ba, SEQ_ID_EXTENDED_MEM_ENA) & 0x1f) | 0 );
|
|
/* clear extended chain4 mode */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR, RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) & ~0x02);
|
|
|
|
/* set write mode 1, "[...] data in the read latches is written
|
|
to memory during CPU memory write cycles. [...]" */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 1);
|
|
|
|
{
|
|
/* write to line TOP + LINES */
|
|
long toloc = (top + lines) * (md->TX / 16);
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, ((unsigned char)toloc));
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, ((unsigned char)(toloc >> 8)));
|
|
}
|
|
{
|
|
/* read from line TOP */
|
|
long fromloc = top * (md->TX / 16);
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_LO, ((unsigned char)fromloc));
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_HI, ((unsigned char)(fromloc >> 8))) ;
|
|
}
|
|
|
|
{
|
|
unsigned char * p = (unsigned char *) fb;
|
|
short x = (1 + bottom - (top + lines)) * (md->TX / 16) - 1;
|
|
p += (1 + bottom - (top + lines)) * md->TX;
|
|
do {
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
asm volatile("addqb #1,%0@-" : "=a" (p) : "0" (p));
|
|
} while (x--);
|
|
}
|
|
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, 0);
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, 0);
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_HI, 0);
|
|
WSeq (ba, SEQ_ID_SEC_HOST_OFF_LO, 0);
|
|
|
|
/* write mode 0 */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 0);
|
|
/* extended chain4 enable */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR , RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) | 0x02);
|
|
/* read/write to primary on A0, secondary on B0 */
|
|
WSeq (ba, SEQ_ID_EXTENDED_MEM_ENA, (RSeq(ba, SEQ_ID_EXTENDED_MEM_ENA) & 0x1f) | 0x40 );
|
|
|
|
/* fill the free lines with spaces */
|
|
|
|
{ /* feed latches with value */
|
|
unsigned short * f = (unsigned short *) fb;
|
|
|
|
f += top * md->TX * 2;
|
|
*f = 0x2010;
|
|
{
|
|
volatile unsigned short dummy = *((volatile unsigned short *)f);
|
|
}
|
|
}
|
|
|
|
/* clear extended chain4 mode */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR, RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) & ~0x02);
|
|
/* set write mode 1, "[...] data in the read latches is written
|
|
to memory during CPU memory write cycles. [...]" */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 1);
|
|
|
|
{
|
|
unsigned long * p = (unsigned long *) fb;
|
|
short x = (lines * (md->TX/16)) - 1;
|
|
const unsigned long dummyval = 0;
|
|
|
|
p += top * (md->TX/4);
|
|
|
|
do {
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
*p++ = dummyval;
|
|
} while (x--);
|
|
}
|
|
|
|
/* write mode 0 */
|
|
WGfx (ba, GCT_ID_GRAPHICS_MODE, (RGfx(ba, GCT_ID_GRAPHICS_MODE) & 0xfc) | 0);
|
|
/* extended chain4 enable */
|
|
WSeq (ba, SEQ_ID_EXT_VIDEO_ADDR , RSeq(ba, SEQ_ID_EXT_VIDEO_ADDR) | 0x02);
|
|
|
|
#ifdef BANKEDDEVPAGER
|
|
/* restore former bank */
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_LO, (unsigned char) bank);
|
|
bank >>= 8;
|
|
WSeq (ba, SEQ_ID_PRIM_HOST_OFF_HI, (unsigned char) bank);
|
|
#endif
|
|
};
|
|
|
|
void retina_deinit(struct ite_softc *ip)
|
|
{
|
|
ip->flags &= ~ITE_INITED;
|
|
}
|
|
|
|
|
|
void retina_putc(struct ite_softc *ip, int c, int dy, int dx, int mode)
|
|
{
|
|
volatile u_char * ba = ip->grf->g_regkva;
|
|
volatile u_char * fb = ip->grf->g_fbkva;
|
|
register u_char attr;
|
|
|
|
attr = (mode & ATTR_INV) ? 0x21 : 0x10;
|
|
if (mode & ATTR_UL) attr = 0x01; /* ???????? */
|
|
if (mode & ATTR_BOLD) attr |= 0x08;
|
|
if (mode & ATTR_BLINK) attr |= 0x80;
|
|
|
|
fb += 4 * (dy * ip->cols + dx);
|
|
*fb++ = c; *fb = attr;
|
|
}
|
|
|
|
void retina_clear(struct ite_softc *ip, int sy, int sx, int h, int w)
|
|
{
|
|
volatile u_char * ba = ip->grf->g_regkva;
|
|
u_short * fb = (u_short *) ip->grf->g_fbkva;
|
|
short x;
|
|
const u_short fillval = 0x2010;
|
|
/* could probably be optimized just like the scrolling functions !! */
|
|
fb += 2 * (sy * ip->cols + sx);
|
|
while (h--)
|
|
{
|
|
for (x = 2 * (w - 1); x >= 0; x -= 2)
|
|
fb[x] = fillval;
|
|
fb += 2 * ip->cols;
|
|
}
|
|
}
|
|
|
|
void retina_scroll(struct ite_softc *ip, int sy, int sx, int count, int dir)
|
|
{
|
|
volatile u_char * ba = ip->grf->g_regkva;
|
|
u_long * fb = (u_long *) ip->grf->g_fbkva;
|
|
register int height, dy, i;
|
|
|
|
retina_cursor(ip, ERASE_CURSOR);
|
|
|
|
if (dir == SCROLL_UP)
|
|
{
|
|
screen_up (ip, sy - count, ip->bottom_margin, count);
|
|
/* bcopy (fb + sy * ip->cols, fb + (sy - count) * ip->cols, 4 * (ip->bottom_margin - sy + 1) * ip->cols); */
|
|
/* retina_clear (ip, ip->bottom_margin + 1 - count, 0, count, ip->cols); */
|
|
}
|
|
else if (dir == SCROLL_DOWN)
|
|
{
|
|
screen_down (ip, sy, ip->bottom_margin, count);
|
|
/* bcopy (fb + sy * ip->cols, fb + (sy + count) * ip->cols, 4 * (ip->bottom_margin - sy - count + 1) * ip->cols); */
|
|
/* retina_clear (ip, sy, 0, count, ip->cols); */
|
|
}
|
|
else if (dir == SCROLL_RIGHT)
|
|
{
|
|
bcopy (fb + sx + sy * ip->cols, fb + sx + sy * ip->cols + count, 4 * (ip->cols - (sx + count)));
|
|
retina_clear (ip, sy, sx, 1, count);
|
|
}
|
|
else
|
|
{
|
|
bcopy (fb + sx + sy * ip->cols, fb + sx - count + sy * ip->cols, 4 * (ip->cols - sx));
|
|
retina_clear (ip, sy, ip->cols - count, 1, count);
|
|
}
|
|
}
|
|
|
|
#endif /* NGRFRT */
|