586 lines
20 KiB
Plaintext
586 lines
20 KiB
Plaintext
# $NetBSD: GENERIC,v 1.11 2002/11/22 12:21:01 wiz Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/hp700/conf/std.hp700"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.11 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# CPU support. At least one is REQUIRED.
|
|
options HP7000_CPU # PCX, PCX-S
|
|
options HP7100_CPU,HP7150_CPU # PCX-T
|
|
options HP7100LC_CPU # PCX-L
|
|
options HP7200_CPU,HP7250_CPU # PCX-T'
|
|
options HP7300LC_CPU # PCX-L2
|
|
#options HP8000_CPU # PCX-U (in 32bit mode)
|
|
#options HP8200_CPU # PCX-V/U+ (in 32bit mode)
|
|
#options HP8500_CPU # PCX-W (in 32bit mode)
|
|
#options HP8600_CPU # PCX-W+ (in 32bit mode)
|
|
|
|
# CPU-related options.
|
|
options FPEMUL # floating point emulation XXX DO NOT REMOVE
|
|
options USELEDS # blink 'em
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# Standard system options
|
|
|
|
options UCONSOLE # users can use TIOCCONS (for xconsole)
|
|
options INSECURE # disable kernel security levels
|
|
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
options LKM # loadable kernel modules
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options NEW_BUFQ_STRATEGY
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # expensive kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDBADDR=0xf0822000,KGDBRATE=9600
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_15 # compatability with NetBSD 1.5,
|
|
options COMPAT_43 # and 4.3BSD
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
#options COMPAT_HPUX # HP-UX binary compatibility
|
|
#options COMPAT_OSF1 # OSF1 binary compatibility
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
options CCITT,LLC,HDLC # X.25
|
|
options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
options GSCVERBOSE # verbose GSC device autoconfig messages
|
|
options EISAVERBOSE # verbose EISA device autoconfig messages
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
#
|
|
# wscons options
|
|
#
|
|
# builtin terminal emulations
|
|
options WSEMUL_DUMB
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# different kernel output - see dev/wscons/wsdisplayvar.h
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
# compatibility to other console drivers
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
# use a large software cursor that doesn't blink
|
|
options PCDISPLAY_SOFTCURSOR
|
|
# modify the screen type of the console; defaults to "80x25"
|
|
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
|
|
|
|
# Kernel root file system and dump configuration.
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on sd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
|
|
# CPU and memory - DO NOT REMOVE THESE
|
|
cpu* at mainbus0 irq 31 # HP PA-RISC cpu
|
|
mem* at mainbus0 # /dev/*mem and memory controller
|
|
|
|
# Coprocessor/SFU Support
|
|
#fpu* at mainbus0 # HP PA-RISC fpu (iv N/A)
|
|
#pmu* at mainbus0 # HP PA-RISC perfomance monitor unit (iv 29)
|
|
#power* at mainbus0 # power/fail manager (iv 2)
|
|
|
|
# STI graphics
|
|
sti* at mainbus0 # [H]CRX-{8,24,48}[Z] graphics
|
|
|
|
# Basic Bus Support
|
|
lasi* at mainbus0 # LASI host adapter (LSI PN??? )
|
|
asp0 at mainbus0 # this one comes w/ Viper and leds
|
|
#wax* at mainbus0 # Wax may host EISA as well
|
|
mongoose* at mainbus0 irq 17 # EISA Bus Adapter (i82350 or TI??? )
|
|
#vmeb* at mainbus0 irq ? # VME bus adapter
|
|
#dino* at mainbus0 irq ? # PCI bus bridge
|
|
pdc0 at mainbus0 # PDC/IODC wrapper for boot console
|
|
|
|
# GSC bus support
|
|
gsc* at lasi? # 712
|
|
gsc* at asp? # 7xx (old)
|
|
#gsc* at wax? # {725,715}/{64,80,100}, C*, B*, J*
|
|
|
|
# PCI bus support
|
|
#pci* at dino?
|
|
|
|
# EISA bus support
|
|
eisa* at mongoose?
|
|
#eisa* at wax?
|
|
#eisa0 at pceb?
|
|
|
|
# ISA bus support
|
|
#isa* at mongoose?
|
|
#isa* at wax?
|
|
#isa0 at pceb?
|
|
#isa0 at pcib?
|
|
|
|
# VME bus support
|
|
#vme* at vmeb?
|
|
|
|
# Console Devices
|
|
|
|
# Human Interface Loop
|
|
#hil* at gsc?
|
|
#hkbd* at hil? code 0 # keyboard
|
|
#hms* at hil? code 1 # mice & trackballs
|
|
|
|
# wscons
|
|
#pckbc* at gsc? # pc keyboard controller
|
|
#pckbd* at pckbc? # PC keyboard
|
|
#pms* at pckbc? # PS/2 mouse for wsmouse
|
|
#vga0 at isa?
|
|
#vga* at pci? dev ? function ?
|
|
#pcdisplay0 at isa? # CGA, MDA, EGA, HGA
|
|
wsdisplay* at sti?
|
|
#wsdisplay* at vga? console ?
|
|
#wsdisplay* at pcdisplay? console ?
|
|
#wskbd* at pckbd? console ?
|
|
#wskbd* at hkbd? console ?
|
|
#wsmouse* at pms? mux 0
|
|
#wsmouse* at hms? mux 0
|
|
|
|
# Serial Devices
|
|
|
|
# GSC serial interfaces
|
|
com* at gsc? # RS/232 serial port
|
|
|
|
# ISA serial interfaces
|
|
#options COM_HAYESP # adds Hayes ESP serial board support
|
|
#com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
#com1 at isa? port 0x2f8 irq 3
|
|
#com2 at isa? port 0x3e8 irq 5
|
|
#com3 at isa? port 0x2e8 irq 9
|
|
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
|
|
#com* at ast? slave ?
|
|
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
|
|
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
|
|
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
|
|
#com* at boca? slave ?
|
|
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
|
|
#com* at tcom? slave ?
|
|
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
|
|
#com* at rtfps? slave ?
|
|
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
|
|
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
|
|
#com* at addcom? slave ?
|
|
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
|
|
#com* at moxa? slave ?
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
# GSC parallel printer interface
|
|
lpt* at gsc?
|
|
|
|
# ISA parallel printer interfaces
|
|
#lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
#lpt1 at isa? port 0x278
|
|
#lpt2 at isa? port 0x3bc
|
|
|
|
# SCSI Controllers and Devices
|
|
|
|
# GSC SCSI controllers
|
|
osiop* at gsc? flags 0xffff # NCR 53c700 or NCR 53c710
|
|
#siop* at gsc? # NCR 53c720 (Fast/Wide)
|
|
|
|
# EISA SCSI controllers
|
|
ahb* at eisa? slot ? # Adaptec 174[02] SCSI
|
|
ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
|
|
bha* at eisa? slot ? # BusLogic 7xx SCSI
|
|
dpt* at eisa? slot ? # DPT EATA SCSI
|
|
uha* at eisa? slot ? # UltraStor 24f SCSI
|
|
|
|
# ISA SCSI controllers
|
|
#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] SCSI
|
|
#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
|
|
#aha1 at isa? port 0x334 irq ? drq ?
|
|
#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
|
|
#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
|
|
#bha1 at isa? port 0x334 irq ? drq ?
|
|
# The "nca" and "dpt" probes might give false hits or hang your machine.
|
|
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
|
|
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 controller
|
|
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
|
|
#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
|
|
#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
|
|
#uha1 at isa? port 0x340 irq ? drq ?
|
|
#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
|
|
#wds1 at isa? port 0x358 irq 11 drq 5
|
|
|
|
# SCSI bus support
|
|
#scsibus* at adv?
|
|
#scsibus* at adw?
|
|
#scsibus* at aha?
|
|
scsibus* at ahb?
|
|
scsibus* at ahc?
|
|
#scsibus* at aic?
|
|
scsibus* at bha?
|
|
#scsibus* at dpt?
|
|
#scsibus* at esp?
|
|
#scsibus* at iha?
|
|
#scsibus* at iopsp?
|
|
#scsibus* at isp?
|
|
#scsibus* at mly?
|
|
#scsibus* at nca?
|
|
scsibus* at osiop?
|
|
#scsibus* at pcscp?
|
|
#scsibus* at sea?
|
|
#scsibus* at siop?
|
|
#scsibus* at trm?
|
|
#scsibus* at uha?
|
|
#scsibus* at wds?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
st* at scsibus? target ? lun ? # SCSI tape drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
ch* at scsibus? target ? lun ? # SCSI autochangers
|
|
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
uk* at scsibus? target ? lun ? # SCSI unknown
|
|
|
|
|
|
# RAID controllers and devices
|
|
cac* at eisa? slot ? # Compaq EISA array controllers
|
|
mlx* at eisa? slot ? # Mylex DAC960 & DEC SWXCR family
|
|
|
|
ld* at cac? unit ?
|
|
ld* at mlx? unit ?
|
|
|
|
# IDE and related devices
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
#wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
#wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
#atapibus* at wdc? channel ?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
#st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
|
|
#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
|
|
# Miscellaneous mass storage devices
|
|
|
|
# GSC floppy
|
|
#fdc* at gsc? # PC floppy controller (WD37C65C)
|
|
#options FD_DEBUG
|
|
|
|
# ISA floppy
|
|
#fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
|
|
#fdc1 at isa? port 0x370 irq ? drq ?
|
|
#fd* at fdc? drive ? # the drives themselves
|
|
# some machines need you to do this instead of fd*
|
|
#fd0 at fdc0 drive 0
|
|
|
|
# ISA CD-ROM devices
|
|
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
|
|
|
|
# ISA tape devices
|
|
# note: the wt driver conflicts unpleasantly with SMC boards at the
|
|
# same I/O address. The probe reprograms their EEPROMs. Don't
|
|
# uncomment it unless you are actually using it.
|
|
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
|
|
|
|
|
|
# Network Interfaces
|
|
|
|
# GSC network interfaces
|
|
#medusa* at gsc? # FDDI
|
|
ie* at gsc? # 82C5[89]6 ether
|
|
|
|
# EISA network interfaces
|
|
ep* at eisa? slot ? # 3Com 3c579 Ethernet
|
|
#fea* at eisa? slot ? # DEC DEFEA FDDI
|
|
tlp* at eisa? slot ? # DEC DE-425 Ethernet
|
|
#sh* at eisa? slot ? # Interphase Seahawk 4811 FDDI
|
|
#ie* at eisa? slot ? # Intel Ethernet
|
|
|
|
# ISA network interfaces
|
|
#ate0 at isa? port 0x2a0 irq ? # AT1700
|
|
#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
|
|
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
|
|
#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
|
|
#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
|
|
#ep* at isa? port ? irq ? # 3C509 ethernet cards
|
|
#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
|
|
#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
|
|
#fmv0 at isa? port 0x2a0 irq ? # FMV-180 series
|
|
#ie* at isa? port 0x360 iomem 0xd0000 irq 7 # Intel Ethernet
|
|
#ie* at isa? port 0x300 irq 10 # Intel Ethernet
|
|
#ix0 at isa? port 0x300 irq 10 # EtherExpress/16
|
|
#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
|
|
#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
|
|
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
|
|
#le* at depca?
|
|
#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
|
|
#le* at nele?
|
|
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
|
|
#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
|
|
#le* at bicc?
|
|
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
|
|
#ne1 at isa? port 0x300 irq 10
|
|
#sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
|
|
#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
|
|
#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
|
|
#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
|
|
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
|
|
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
|
|
|
|
# MII/PHY support
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
|
|
# Audio Devices
|
|
|
|
# GSC audio devices
|
|
#aone* at gsc? # Audio Type 1 (PSB 2160-N)
|
|
#harmony* at gsc? # Audio Type 2 (CS4215)
|
|
#com* at harmony? # Telephone add-in card
|
|
|
|
# ISA audio devices
|
|
# the "aria" probe might give false hits
|
|
#aria0 at isa? port 0x290 irq 10 # Aria
|
|
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
|
|
#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
|
|
#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
|
|
#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
|
|
#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
|
|
#sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
|
|
#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
|
|
|
|
#cms0 at isa? port 0x220 # Creative Music System
|
|
|
|
# OPL[23] FM synthesizers
|
|
#opl0 at isa? port 0x388 # use only if not attached to sound card
|
|
#opl* at ess?
|
|
#opl* at sb?
|
|
#opl* at wss?
|
|
|
|
# Audio support
|
|
#audio* at aone?
|
|
#audio* at aria?
|
|
#audio* at ess?
|
|
#audio* at gus?
|
|
#audio* at harmony?
|
|
#audio* at pas?
|
|
#audio* at sb?
|
|
#audio* at sp?
|
|
#audio* at wss?
|
|
|
|
# MPU 401 UARTs
|
|
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
|
|
#mpu* at sb?
|
|
|
|
# MIDI support
|
|
#midi* at opl? # OPL FM synth
|
|
#midi* at pcppi? # MIDI interface to the PC speaker
|
|
#midi* at sb? # SB1 MIDI port
|
|
|
|
# FM-Radio devices
|
|
# ISA radio devices
|
|
#az0 at isa? port 0x350 # Aztech/PackardBell FM Radio Card
|
|
#az1 at isa? port 0x358
|
|
#rt0 at isa? port 0x20c # AIMS Lab Radiotrack & compatible
|
|
#rt1 at isa? port 0x284
|
|
#rt2 at isa? port 0x30c
|
|
#rt3 at isa? port 0x384
|
|
#rtii0 at isa? port 0x20c # AIMS Lab Radiotrack II FM Radio Card
|
|
#rtii1 at isa? port 0x30c
|
|
#sf2r0 at isa? port 0x384 # SoundForte RadioLink SF16-FMR2 FM Radio Card
|
|
|
|
# Radio support
|
|
#radio* at az?
|
|
#radio* at rt?
|
|
#radio* at rtii?
|
|
#radio* at sf2r?
|
|
|
|
# Joysticks
|
|
|
|
# ISA joysticks. Probe is a little strange; add only if you have one.
|
|
#joy0 at isa? port 0x201
|
|
|
|
|
|
# Miscellaneous Devices
|
|
|
|
# Planetconnect Satellite receiver driver.
|
|
#satlink0 at isa? port 0x300 drq 1
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
#pseudo-device cgd 4 # cryptographic disk devices
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
#Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device sl 2 # Serial Line IP
|
|
pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
pseudo-device irframetty # IrDA frame line discipline
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device tb 1 # tablet line discipline
|
|
pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port hp700 yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# wscons pseudo-devices
|
|
pseudo-device wsmux # mouse & keyboard multiplexor
|
|
pseudo-device wsfont
|