1020 lines
25 KiB
C
1020 lines
25 KiB
C
/* $NetBSD: isp_netbsd.c,v 1.46 2001/07/07 01:44:21 mjacob Exp $ */
|
|
/*
|
|
* This driver, which is contained in NetBSD in the files:
|
|
*
|
|
* sys/dev/ic/isp.c
|
|
* sys/dev/ic/isp_inline.h
|
|
* sys/dev/ic/isp_netbsd.c
|
|
* sys/dev/ic/isp_netbsd.h
|
|
* sys/dev/ic/isp_target.c
|
|
* sys/dev/ic/isp_target.h
|
|
* sys/dev/ic/isp_tpublic.h
|
|
* sys/dev/ic/ispmbox.h
|
|
* sys/dev/ic/ispreg.h
|
|
* sys/dev/ic/ispvar.h
|
|
* sys/microcode/isp/asm_sbus.h
|
|
* sys/microcode/isp/asm_1040.h
|
|
* sys/microcode/isp/asm_1080.h
|
|
* sys/microcode/isp/asm_12160.h
|
|
* sys/microcode/isp/asm_2100.h
|
|
* sys/microcode/isp/asm_2200.h
|
|
* sys/pci/isp_pci.c
|
|
* sys/sbus/isp_sbus.c
|
|
*
|
|
* Is being actively maintained by Matthew Jacob (mjacob@netbsd.org).
|
|
* This driver also is shared source with FreeBSD, OpenBSD, Linux, Solaris,
|
|
* Linux versions. This tends to be an interesting maintenance problem.
|
|
*
|
|
* Please coordinate with Matthew Jacob on changes you wish to make here.
|
|
*/
|
|
/*
|
|
* Platform (NetBSD) dependent common attachment code for Qlogic adapters.
|
|
* Matthew Jacob <mjacob@nas.nasa.gov>
|
|
*/
|
|
/*
|
|
* Copyright (C) 1997, 1998, 1999 National Aeronautics & Space Administration
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <dev/ic/isp_netbsd.h>
|
|
#include <sys/scsiio.h>
|
|
|
|
|
|
/*
|
|
* Set a timeout for the watchdogging of a command.
|
|
*
|
|
* The dimensional analysis is
|
|
*
|
|
* milliseconds * (seconds/millisecond) * (ticks/second) = ticks
|
|
*
|
|
* =
|
|
*
|
|
* (milliseconds / 1000) * hz = ticks
|
|
*
|
|
*
|
|
* For timeouts less than 1 second, we'll get zero. Because of this, and
|
|
* because we want to establish *our* timeout to be longer than what the
|
|
* firmware might do, we just add 3 seconds at the back end.
|
|
*/
|
|
#define _XT(xs) ((((xs)->timeout/1000) * hz) + (3 * hz))
|
|
|
|
static void isp_config_interrupts(struct device *);
|
|
static void ispminphys_1020(struct buf *);
|
|
static void ispminphys(struct buf *);
|
|
static INLINE void ispcmd(struct ispsoftc *, XS_T *);
|
|
static void isprequest(struct scsipi_channel *, scsipi_adapter_req_t, void *);
|
|
static int
|
|
ispioctl(struct scsipi_channel *, u_long, caddr_t, int, struct proc *);
|
|
|
|
static void isp_polled_cmd(struct ispsoftc *, XS_T *);
|
|
static void isp_dog(void *);
|
|
static void isp_create_fc_worker(void *);
|
|
static void isp_fc_worker(void *);
|
|
|
|
/*
|
|
* Complete attachment of hardware, include subdevices.
|
|
*/
|
|
void
|
|
isp_attach(struct ispsoftc *isp)
|
|
{
|
|
isp->isp_state = ISP_RUNSTATE;
|
|
|
|
isp->isp_osinfo._adapter.adapt_dev = &isp->isp_osinfo._dev;
|
|
isp->isp_osinfo._adapter.adapt_nchannels = IS_DUALBUS(isp) ? 2 : 1;
|
|
isp->isp_osinfo._adapter.adapt_openings = isp->isp_maxcmds;
|
|
/*
|
|
* It's not stated whether max_periph is limited by SPI
|
|
* tag uage, but let's assume that it is.
|
|
*/
|
|
isp->isp_osinfo._adapter.adapt_max_periph = min(isp->isp_maxcmds, 255);
|
|
isp->isp_osinfo._adapter.adapt_ioctl = ispioctl;
|
|
isp->isp_osinfo._adapter.adapt_request = isprequest;
|
|
if (isp->isp_type <= ISP_HA_SCSI_1020A) {
|
|
isp->isp_osinfo._adapter.adapt_minphys = ispminphys_1020;
|
|
} else {
|
|
isp->isp_osinfo._adapter.adapt_minphys = ispminphys;
|
|
}
|
|
|
|
isp->isp_osinfo._chan.chan_adapter = &isp->isp_osinfo._adapter;
|
|
isp->isp_osinfo._chan.chan_bustype = &scsi_bustype;
|
|
isp->isp_osinfo._chan.chan_channel = 0;
|
|
|
|
/*
|
|
* Until the midlayer is fixed to use REPORT LUNS, limit to 8 luns.
|
|
*/
|
|
isp->isp_osinfo._chan.chan_nluns = min(isp->isp_maxluns, 8);
|
|
|
|
if (IS_FC(isp)) {
|
|
isp->isp_osinfo._chan.chan_ntargets = MAX_FC_TARG;
|
|
isp->isp_osinfo._chan.chan_id = MAX_FC_TARG;
|
|
isp->isp_osinfo.threadwork = 1;
|
|
/*
|
|
* Note that isp_create_fc_worker won't get called
|
|
* until much much later (after proc0 is created).
|
|
*/
|
|
kthread_create(isp_create_fc_worker, isp);
|
|
} else {
|
|
int bus = 0;
|
|
sdparam *sdp = isp->isp_param;
|
|
|
|
isp->isp_osinfo._chan.chan_ntargets = MAX_TARGETS;
|
|
isp->isp_osinfo._chan.chan_id = sdp->isp_initiator_id;
|
|
isp->isp_osinfo.discovered[0] = 1 << sdp->isp_initiator_id;
|
|
if (IS_DUALBUS(isp)) {
|
|
isp->isp_osinfo._chan_b = isp->isp_osinfo._chan;
|
|
sdp++;
|
|
isp->isp_osinfo.discovered[1] =
|
|
1 << sdp->isp_initiator_id;
|
|
isp->isp_osinfo._chan_b.chan_id = sdp->isp_initiator_id;
|
|
isp->isp_osinfo._chan_b.chan_channel = 1;
|
|
}
|
|
ISP_LOCK(isp);
|
|
(void) isp_control(isp, ISPCTL_RESET_BUS, &bus);
|
|
if (IS_DUALBUS(isp)) {
|
|
bus++;
|
|
(void) isp_control(isp, ISPCTL_RESET_BUS, &bus);
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
}
|
|
|
|
|
|
/*
|
|
* Defer enabling mailbox interrupts until later.
|
|
*/
|
|
config_interrupts((struct device *) isp, isp_config_interrupts);
|
|
|
|
/*
|
|
* And attach children (if any).
|
|
*/
|
|
config_found((void *)isp, &isp->isp_chanA, scsiprint);
|
|
if (IS_DUALBUS(isp)) {
|
|
config_found((void *)isp, &isp->isp_chanB, scsiprint);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
isp_config_interrupts(struct device *self)
|
|
{
|
|
struct ispsoftc *isp = (struct ispsoftc *) self;
|
|
|
|
/*
|
|
* After this point, we'll be doing the new configuration
|
|
* schema which allows interrups, so we can do tsleep/wakeup
|
|
* for mailbox stuff at that point.
|
|
*/
|
|
isp->isp_osinfo.no_mbox_ints = 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* minphys our xfers
|
|
*/
|
|
|
|
static void
|
|
ispminphys_1020(struct buf *bp)
|
|
{
|
|
if (bp->b_bcount >= (1 << 24)) {
|
|
bp->b_bcount = (1 << 24);
|
|
}
|
|
minphys(bp);
|
|
}
|
|
|
|
static void
|
|
ispminphys(struct buf *bp)
|
|
{
|
|
if (bp->b_bcount >= (1 << 30)) {
|
|
bp->b_bcount = (1 << 30);
|
|
}
|
|
minphys(bp);
|
|
}
|
|
|
|
static int
|
|
ispioctl(struct scsipi_channel *chan, u_long cmd, caddr_t addr, int flag,
|
|
struct proc *p)
|
|
{
|
|
struct ispsoftc *isp = (void *)chan->chan_adapter->adapt_dev;
|
|
int retval = ENOTTY;
|
|
|
|
switch (cmd) {
|
|
case SCBUSIORESET:
|
|
ISP_LOCK(isp);
|
|
if (isp_control(isp, ISPCTL_RESET_BUS, &chan->chan_channel))
|
|
retval = EIO;
|
|
else
|
|
retval = 0;
|
|
ISP_UNLOCK(isp);
|
|
break;
|
|
case ISP_SDBLEV:
|
|
{
|
|
int olddblev = isp->isp_dblev;
|
|
isp->isp_dblev = *(int *)addr;
|
|
*(int *)addr = olddblev;
|
|
retval = 0;
|
|
break;
|
|
}
|
|
case ISP_RESETHBA:
|
|
ISP_LOCK(isp);
|
|
isp_reinit(isp);
|
|
ISP_UNLOCK(isp);
|
|
retval = 0;
|
|
break;
|
|
case ISP_FC_RESCAN:
|
|
if (IS_FC(isp)) {
|
|
ISP_LOCK(isp);
|
|
if (isp_fc_runstate(isp, 5 * 1000000)) {
|
|
retval = EIO;
|
|
} else {
|
|
retval = 0;
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
}
|
|
break;
|
|
case ISP_FC_LIP:
|
|
if (IS_FC(isp)) {
|
|
ISP_LOCK(isp);
|
|
if (isp_control(isp, ISPCTL_SEND_LIP, 0)) {
|
|
retval = EIO;
|
|
} else {
|
|
retval = 0;
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
}
|
|
break;
|
|
case ISP_FC_GETDINFO:
|
|
{
|
|
struct isp_fc_device *ifc = (struct isp_fc_device *) addr;
|
|
struct lportdb *lp;
|
|
|
|
if (ifc->loopid < 0 || ifc->loopid >= MAX_FC_TARG) {
|
|
retval = EINVAL;
|
|
break;
|
|
}
|
|
ISP_LOCK(isp);
|
|
lp = &FCPARAM(isp)->portdb[ifc->loopid];
|
|
if (lp->valid) {
|
|
ifc->loopid = lp->loopid;
|
|
ifc->portid = lp->portid;
|
|
ifc->node_wwn = lp->node_wwn;
|
|
ifc->port_wwn = lp->port_wwn;
|
|
retval = 0;
|
|
} else {
|
|
retval = ENODEV;
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
return (retval);
|
|
}
|
|
|
|
static INLINE void
|
|
ispcmd(struct ispsoftc *isp, XS_T *xs)
|
|
{
|
|
ISP_LOCK(isp);
|
|
if (isp->isp_state < ISP_RUNSTATE) {
|
|
DISABLE_INTS(isp);
|
|
isp_init(isp);
|
|
if (isp->isp_state != ISP_INITSTATE) {
|
|
ENABLE_INTS(isp);
|
|
ISP_UNLOCK(isp);
|
|
XS_SETERR(xs, HBA_BOTCH);
|
|
scsipi_done(xs);
|
|
return;
|
|
}
|
|
isp->isp_state = ISP_RUNSTATE;
|
|
ENABLE_INTS(isp);
|
|
}
|
|
/*
|
|
* Handle the case of a FC card where the FC thread hasn't
|
|
* fired up yet and we have loop state to clean up. If we
|
|
* can't clear things up and we've never seen loop up, bounce
|
|
* the command.
|
|
*/
|
|
if (IS_FC(isp) && isp->isp_osinfo.threadwork &&
|
|
isp->isp_osinfo.thread == 0) {
|
|
volatile u_int8_t ombi = isp->isp_osinfo.no_mbox_ints;
|
|
int delay_time;
|
|
|
|
if (xs->xs_control & XS_CTL_POLL) {
|
|
isp->isp_osinfo.no_mbox_ints = 1;
|
|
}
|
|
|
|
if (isp->isp_osinfo.loop_checked == 0) {
|
|
delay_time = 10 * 1000000;
|
|
isp->isp_osinfo.loop_checked = 1;
|
|
} else {
|
|
delay_time = 250000;
|
|
}
|
|
|
|
if (isp_fc_runstate(isp, delay_time) != 0) {
|
|
if (xs->xs_control & XS_CTL_POLL) {
|
|
isp->isp_osinfo.no_mbox_ints = ombi;
|
|
}
|
|
if (FCPARAM(isp)->loop_seen_once == 0) {
|
|
XS_SETERR(xs, HBA_SELTIMEOUT);
|
|
scsipi_done(xs);
|
|
ISP_UNLOCK(isp);
|
|
return;
|
|
}
|
|
/*
|
|
* Otherwise, fall thru to be queued up for later.
|
|
*/
|
|
} else {
|
|
int wasblocked =
|
|
(isp->isp_osinfo.blocked || isp->isp_osinfo.paused);
|
|
isp->isp_osinfo.threadwork = 0;
|
|
isp->isp_osinfo.blocked =
|
|
isp->isp_osinfo.paused = 0;
|
|
if (wasblocked) {
|
|
scsipi_channel_thaw(&isp->isp_chanA, 1);
|
|
}
|
|
}
|
|
if (xs->xs_control & XS_CTL_POLL) {
|
|
isp->isp_osinfo.no_mbox_ints = ombi;
|
|
}
|
|
}
|
|
|
|
if (isp->isp_osinfo.paused) {
|
|
isp_prt(isp, ISP_LOGWARN, "I/O while paused");
|
|
xs->error = XS_RESOURCE_SHORTAGE;
|
|
scsipi_done(xs);
|
|
ISP_UNLOCK(isp);
|
|
return;
|
|
}
|
|
if (isp->isp_osinfo.blocked) {
|
|
isp_prt(isp, ISP_LOGWARN, "I/O while blocked");
|
|
xs->error = XS_REQUEUE;
|
|
scsipi_done(xs);
|
|
ISP_UNLOCK(isp);
|
|
return;
|
|
}
|
|
|
|
if (xs->xs_control & XS_CTL_POLL) {
|
|
volatile u_int8_t ombi = isp->isp_osinfo.no_mbox_ints;
|
|
isp->isp_osinfo.no_mbox_ints = 1;
|
|
isp_polled_cmd(isp, xs);
|
|
isp->isp_osinfo.no_mbox_ints = ombi;
|
|
ISP_UNLOCK(isp);
|
|
return;
|
|
}
|
|
|
|
switch (isp_start(xs)) {
|
|
case CMD_QUEUED:
|
|
if (xs->timeout) {
|
|
callout_reset(&xs->xs_callout, _XT(xs), isp_dog, xs);
|
|
}
|
|
break;
|
|
case CMD_EAGAIN:
|
|
isp->isp_osinfo.paused = 1;
|
|
xs->error = XS_RESOURCE_SHORTAGE;
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
if (IS_DUALBUS(isp)) {
|
|
scsipi_channel_freeze(&isp->isp_chanB, 1);
|
|
}
|
|
scsipi_done(xs);
|
|
break;
|
|
case CMD_RQLATER:
|
|
/*
|
|
* We can only get RQLATER from FC devices (1 channel only)
|
|
*
|
|
* Also, if we've never seen loop up, bounce the command
|
|
* (somebody has booted with no FC cable connected)
|
|
*/
|
|
if (FCPARAM(isp)->loop_seen_once == 0) {
|
|
XS_SETERR(xs, HBA_SELTIMEOUT);
|
|
scsipi_done(xs);
|
|
break;
|
|
}
|
|
if (isp->isp_osinfo.blocked == 0) {
|
|
isp->isp_osinfo.blocked = 1;
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
}
|
|
xs->error = XS_REQUEUE;
|
|
scsipi_done(xs);
|
|
break;
|
|
case CMD_COMPLETE:
|
|
scsipi_done(xs);
|
|
break;
|
|
}
|
|
ISP_UNLOCK(isp);
|
|
}
|
|
|
|
static void
|
|
isprequest(struct scsipi_channel *chan, scsipi_adapter_req_t req, void *arg)
|
|
{
|
|
struct ispsoftc *isp = (void *)chan->chan_adapter->adapt_dev;
|
|
|
|
switch (req) {
|
|
case ADAPTER_REQ_RUN_XFER:
|
|
ispcmd(isp, (XS_T *) arg);
|
|
break;
|
|
|
|
case ADAPTER_REQ_GROW_RESOURCES:
|
|
/* Not supported. */
|
|
break;
|
|
|
|
case ADAPTER_REQ_SET_XFER_MODE:
|
|
if (IS_SCSI(isp)) {
|
|
struct scsipi_xfer_mode *xm = arg;
|
|
int dflags = 0;
|
|
sdparam *sdp = SDPARAM(isp);
|
|
|
|
sdp += chan->chan_channel;
|
|
if (xm->xm_mode & PERIPH_CAP_TQING)
|
|
dflags |= DPARM_TQING;
|
|
if (xm->xm_mode & PERIPH_CAP_WIDE16)
|
|
dflags |= DPARM_WIDE;
|
|
if (xm->xm_mode & PERIPH_CAP_SYNC)
|
|
dflags |= DPARM_SYNC;
|
|
ISP_LOCK(isp);
|
|
sdp->isp_devparam[xm->xm_target].dev_flags |= dflags;
|
|
dflags = sdp->isp_devparam[xm->xm_target].dev_flags;
|
|
sdp->isp_devparam[xm->xm_target].dev_update = 1;
|
|
isp->isp_update |= (1 << chan->chan_channel);
|
|
ISP_UNLOCK(isp);
|
|
isp_prt(isp, ISP_LOGDEBUG1,
|
|
"ispioctl: device flags 0x%x for %d.%d.X",
|
|
dflags, chan->chan_channel, xm->xm_target);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_polled_cmd(struct ispsoftc *isp, XS_T *xs)
|
|
{
|
|
int result;
|
|
int infinite = 0, mswait;
|
|
|
|
result = isp_start(xs);
|
|
|
|
switch (result) {
|
|
case CMD_QUEUED:
|
|
break;
|
|
case CMD_RQLATER:
|
|
if (XS_NOERR(xs)) {
|
|
xs->error = XS_REQUEUE;
|
|
}
|
|
case CMD_EAGAIN:
|
|
if (XS_NOERR(xs)) {
|
|
xs->error = XS_RESOURCE_SHORTAGE;
|
|
}
|
|
/* FALLTHROUGH */
|
|
case CMD_COMPLETE:
|
|
scsipi_done(xs);
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
* If we can't use interrupts, poll on completion.
|
|
*/
|
|
if ((mswait = XS_TIME(xs)) == 0)
|
|
infinite = 1;
|
|
|
|
while (mswait || infinite) {
|
|
if (isp_intr((void *)isp)) {
|
|
if (XS_CMD_DONE_P(xs)) {
|
|
break;
|
|
}
|
|
}
|
|
USEC_DELAY(1000);
|
|
mswait -= 1;
|
|
}
|
|
|
|
/*
|
|
* If no other error occurred but we didn't finish,
|
|
* something bad happened.
|
|
*/
|
|
if (XS_CMD_DONE_P(xs) == 0) {
|
|
if (isp_control(isp, ISPCTL_ABORT_CMD, xs)) {
|
|
isp_reinit(isp);
|
|
}
|
|
if (XS_NOERR(xs)) {
|
|
XS_SETERR(xs, HBA_BOTCH);
|
|
}
|
|
}
|
|
scsipi_done(xs);
|
|
}
|
|
|
|
void
|
|
isp_done(XS_T *xs)
|
|
{
|
|
XS_CMD_S_DONE(xs);
|
|
if (XS_CMD_WDOG_P(xs) == 0) {
|
|
struct ispsoftc *isp = XS_ISP(xs);
|
|
callout_stop(&xs->xs_callout);
|
|
if (XS_CMD_GRACE_P(xs)) {
|
|
isp_prt(isp, ISP_LOGDEBUG1,
|
|
"finished command on borrowed time");
|
|
}
|
|
XS_CMD_S_CLEAR(xs);
|
|
/*
|
|
* Fixup- if we get a QFULL, we need
|
|
* to set XS_BUSY as the error.
|
|
*/
|
|
if (xs->status == SCSI_QUEUE_FULL) {
|
|
xs->error = XS_BUSY;
|
|
}
|
|
if (isp->isp_osinfo.paused) {
|
|
isp->isp_osinfo.paused = 0;
|
|
scsipi_channel_timed_thaw(&isp->isp_chanA);
|
|
if (IS_DUALBUS(isp)) {
|
|
scsipi_channel_timed_thaw(&isp->isp_chanB);
|
|
}
|
|
}
|
|
scsipi_done(xs);
|
|
}
|
|
}
|
|
|
|
static void
|
|
isp_dog(void *arg)
|
|
{
|
|
XS_T *xs = arg;
|
|
struct ispsoftc *isp = XS_ISP(xs);
|
|
u_int16_t handle;
|
|
|
|
ISP_ILOCK(isp);
|
|
/*
|
|
* We've decided this command is dead. Make sure we're not trying
|
|
* to kill a command that's already dead by getting it's handle and
|
|
* and seeing whether it's still alive.
|
|
*/
|
|
handle = isp_find_handle(isp, xs);
|
|
if (handle) {
|
|
u_int16_t r, r1, i;
|
|
|
|
if (XS_CMD_DONE_P(xs)) {
|
|
isp_prt(isp, ISP_LOGDEBUG1,
|
|
"watchdog found done cmd (handle 0x%x)", handle);
|
|
ISP_IUNLOCK(isp);
|
|
return;
|
|
}
|
|
|
|
if (XS_CMD_WDOG_P(xs)) {
|
|
isp_prt(isp, ISP_LOGDEBUG1,
|
|
"recursive watchdog (handle 0x%x)", handle);
|
|
ISP_IUNLOCK(isp);
|
|
return;
|
|
}
|
|
|
|
XS_CMD_S_WDOG(xs);
|
|
|
|
i = 0;
|
|
do {
|
|
r = ISP_READ(isp, BIU_ISR);
|
|
USEC_DELAY(1);
|
|
r1 = ISP_READ(isp, BIU_ISR);
|
|
} while (r != r1 && ++i < 1000);
|
|
|
|
if (INT_PENDING(isp, r) && isp_intr(isp) && XS_CMD_DONE_P(xs)) {
|
|
isp_prt(isp, ISP_LOGDEBUG1, "watchdog cleanup (%x, %x)",
|
|
handle, r);
|
|
XS_CMD_C_WDOG(xs);
|
|
isp_done(xs);
|
|
} else if (XS_CMD_GRACE_P(xs)) {
|
|
isp_prt(isp, ISP_LOGDEBUG1, "watchdog timeout (%x, %x)",
|
|
handle, r);
|
|
/*
|
|
* Make sure the command is *really* dead before we
|
|
* release the handle (and DMA resources) for reuse.
|
|
*/
|
|
(void) isp_control(isp, ISPCTL_ABORT_CMD, arg);
|
|
|
|
/*
|
|
* After this point, the comamnd is really dead.
|
|
*/
|
|
if (XS_XFRLEN(xs)) {
|
|
ISP_DMAFREE(isp, xs, handle);
|
|
}
|
|
isp_destroy_handle(isp, handle);
|
|
XS_SETERR(xs, XS_TIMEOUT);
|
|
XS_CMD_S_CLEAR(xs);
|
|
isp_done(xs);
|
|
} else {
|
|
u_int16_t iptr, optr;
|
|
ispreq_t *mp;
|
|
isp_prt(isp, ISP_LOGDEBUG2,
|
|
"possible command timeout (%x, %x)", handle, r);
|
|
XS_CMD_C_WDOG(xs);
|
|
callout_reset(&xs->xs_callout, hz, isp_dog, xs);
|
|
if (isp_getrqentry(isp, &iptr, &optr, (void **) &mp)) {
|
|
ISP_UNLOCK(isp);
|
|
return;
|
|
}
|
|
XS_CMD_S_GRACE(xs);
|
|
MEMZERO((void *) mp, sizeof (*mp));
|
|
mp->req_header.rqs_entry_count = 1;
|
|
mp->req_header.rqs_entry_type = RQSTYPE_MARKER;
|
|
mp->req_modifier = SYNC_ALL;
|
|
mp->req_target = XS_CHANNEL(xs) << 7;
|
|
ISP_SWIZZLE_REQUEST(isp, mp);
|
|
ISP_ADD_REQUEST(isp, iptr);
|
|
}
|
|
} else {
|
|
isp_prt(isp, ISP_LOGDEBUG0, "watchdog with no command");
|
|
}
|
|
ISP_IUNLOCK(isp);
|
|
}
|
|
|
|
/*
|
|
* Fibre Channel state cleanup thread
|
|
*/
|
|
static void
|
|
isp_create_fc_worker(void *arg)
|
|
{
|
|
struct ispsoftc *isp = arg;
|
|
|
|
if (kthread_create1(isp_fc_worker, isp, &isp->isp_osinfo.thread,
|
|
"%s:fc_thrd", isp->isp_name)) {
|
|
isp_prt(isp, ISP_LOGERR, "unable to create FC worker thread");
|
|
panic("isp_create_fc_worker");
|
|
}
|
|
|
|
}
|
|
|
|
static void
|
|
isp_fc_worker(void *arg)
|
|
{
|
|
void scsipi_run_queue(struct scsipi_channel *);
|
|
struct ispsoftc *isp = arg;
|
|
|
|
for (;;) {
|
|
int s;
|
|
|
|
/*
|
|
* Note we do *not* use the ISP_LOCK/ISP_UNLOCK macros here.
|
|
*/
|
|
s = splbio();
|
|
while (isp->isp_osinfo.threadwork) {
|
|
isp->isp_osinfo.threadwork = 0;
|
|
if (isp_fc_runstate(isp, 10 * 1000000) == 0) {
|
|
break;
|
|
}
|
|
isp->isp_osinfo.threadwork = 1;
|
|
splx(s);
|
|
delay(500 * 1000);
|
|
s = splbio();
|
|
}
|
|
if (FCPARAM(isp)->isp_fwstate != FW_READY ||
|
|
FCPARAM(isp)->isp_loopstate != LOOP_READY) {
|
|
isp_prt(isp, ISP_LOGINFO, "isp_fc_runstate in vain");
|
|
isp->isp_osinfo.threadwork = 1;
|
|
splx(s);
|
|
continue;
|
|
}
|
|
|
|
if (isp->isp_osinfo.blocked) {
|
|
isp->isp_osinfo.blocked = 0;
|
|
isp_prt(isp, /* ISP_LOGDEBUG0 */ ISP_LOGALL, "restarting queues (freeze count %d)", isp->isp_chanA.chan_qfreeze);
|
|
|
|
scsipi_channel_thaw(&isp->isp_chanA, 1);
|
|
}
|
|
|
|
if (isp->isp_osinfo.thread == NULL)
|
|
break;
|
|
|
|
(void) tsleep(&isp->isp_osinfo.thread, PRIBIO, "fcclnup", 0);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
/* In case parent is waiting for us to exit. */
|
|
wakeup(&isp->isp_osinfo.thread);
|
|
|
|
kthread_exit(0);
|
|
}
|
|
|
|
/*
|
|
* Free any associated resources prior to decommissioning and
|
|
* set the card to a known state (so it doesn't wake up and kick
|
|
* us when we aren't expecting it to).
|
|
*
|
|
* Locks are held before coming here.
|
|
*/
|
|
void
|
|
isp_uninit(struct ispsoftc *isp)
|
|
{
|
|
isp_lock(isp);
|
|
/*
|
|
* Leave with interrupts disabled.
|
|
*/
|
|
DISABLE_INTS(isp);
|
|
isp_unlock(isp);
|
|
}
|
|
|
|
int
|
|
isp_async(struct ispsoftc *isp, ispasync_t cmd, void *arg)
|
|
{
|
|
int bus, tgt;
|
|
|
|
switch (cmd) {
|
|
case ISPASYNC_NEW_TGT_PARAMS:
|
|
if (IS_SCSI(isp) && isp->isp_dblev) {
|
|
sdparam *sdp = isp->isp_param;
|
|
int flags;
|
|
struct scsipi_xfer_mode xm;
|
|
|
|
tgt = *((int *) arg);
|
|
bus = (tgt >> 16) & 0xffff;
|
|
tgt &= 0xffff;
|
|
sdp += bus;
|
|
flags = sdp->isp_devparam[tgt].cur_dflags;
|
|
|
|
xm.xm_mode = 0;
|
|
xm.xm_period = sdp->isp_devparam[tgt].cur_period;
|
|
xm.xm_offset = sdp->isp_devparam[tgt].cur_offset;
|
|
xm.xm_target = tgt;
|
|
|
|
if ((flags & DPARM_SYNC) && xm.xm_period && xm.xm_offset)
|
|
xm.xm_mode |= PERIPH_CAP_SYNC;
|
|
if (flags & DPARM_WIDE)
|
|
xm.xm_mode |= PERIPH_CAP_WIDE16;
|
|
if (flags & DPARM_TQING)
|
|
xm.xm_mode |= PERIPH_CAP_TQING;
|
|
scsipi_async_event(bus? &isp->isp_chanB : &isp->isp_chanA,
|
|
ASYNC_EVENT_XFER_MODE, &xm);
|
|
break;
|
|
}
|
|
case ISPASYNC_BUS_RESET:
|
|
bus = *((int *) arg);
|
|
scsipi_async_event(bus? &isp->isp_chanB : &isp->isp_chanA,
|
|
ASYNC_EVENT_RESET, NULL);
|
|
isp_prt(isp, ISP_LOGINFO, "SCSI bus %d reset detected", bus);
|
|
break;
|
|
case ISPASYNC_LIP:
|
|
/*
|
|
* Don't do queue freezes or blockage until we have the
|
|
* thread running that can unfreeze/unblock us.
|
|
*/
|
|
if (isp->isp_osinfo.blocked == 0) {
|
|
if (isp->isp_osinfo.thread) {
|
|
isp->isp_osinfo.blocked = 1;
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
}
|
|
}
|
|
isp_prt(isp, ISP_LOGINFO, "LIP Received");
|
|
break;
|
|
case ISPASYNC_LOOP_RESET:
|
|
/*
|
|
* Don't do queue freezes or blockage until we have the
|
|
* thread running that can unfreeze/unblock us.
|
|
*/
|
|
if (isp->isp_osinfo.blocked == 0) {
|
|
if (isp->isp_osinfo.thread) {
|
|
isp->isp_osinfo.blocked = 1;
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
}
|
|
}
|
|
isp_prt(isp, ISP_LOGINFO, "Loop Reset Received");
|
|
break;
|
|
case ISPASYNC_LOOP_DOWN:
|
|
/*
|
|
* Don't do queue freezes or blockage until we have the
|
|
* thread running that can unfreeze/unblock us.
|
|
*/
|
|
if (isp->isp_osinfo.blocked == 0) {
|
|
if (isp->isp_osinfo.thread) {
|
|
isp->isp_osinfo.blocked = 1;
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
}
|
|
}
|
|
isp_prt(isp, ISP_LOGINFO, "Loop DOWN");
|
|
break;
|
|
case ISPASYNC_LOOP_UP:
|
|
/*
|
|
* Let the subsequent ISPASYNC_CHANGE_NOTIFY invoke
|
|
* the FC worker thread. When the FC worker thread
|
|
* is done, let *it* call scsipi_channel_thaw...
|
|
*/
|
|
isp_prt(isp, ISP_LOGINFO, "Loop UP");
|
|
break;
|
|
case ISPASYNC_PROMENADE:
|
|
if (IS_FC(isp) && isp->isp_dblev) {
|
|
const char fmt[] = "Target %d (Loop 0x%x) Port ID 0x%x "
|
|
"(role %s) %s\n Port WWN 0x%08x%08x\n Node WWN 0x%08x%08x";
|
|
const static char *roles[4] = {
|
|
"None", "Target", "Initiator", "Target/Initiator"
|
|
};
|
|
fcparam *fcp = isp->isp_param;
|
|
int tgt = *((int *) arg);
|
|
struct lportdb *lp = &fcp->portdb[tgt];
|
|
|
|
isp_prt(isp, ISP_LOGINFO, fmt, tgt, lp->loopid, lp->portid,
|
|
roles[lp->roles & 0x3],
|
|
(lp->valid)? "Arrived" : "Departed",
|
|
(u_int32_t) (lp->port_wwn >> 32),
|
|
(u_int32_t) (lp->port_wwn & 0xffffffffLL),
|
|
(u_int32_t) (lp->node_wwn >> 32),
|
|
(u_int32_t) (lp->node_wwn & 0xffffffffLL));
|
|
break;
|
|
}
|
|
case ISPASYNC_CHANGE_NOTIFY:
|
|
if (arg == ISPASYNC_CHANGE_PDB) {
|
|
isp_prt(isp, ISP_LOGINFO, "Port Database Changed");
|
|
} else if (arg == ISPASYNC_CHANGE_SNS) {
|
|
isp_prt(isp, ISP_LOGINFO,
|
|
"Name Server Database Changed");
|
|
}
|
|
|
|
/*
|
|
* We can set blocked here because we know it's now okay
|
|
* to try and run isp_fc_runstate (in order to build loop
|
|
* state). But we don't try and freeze the midlayer's queue
|
|
* if we have no thread that we can wake to later unfreeze
|
|
* it.
|
|
*/
|
|
if (isp->isp_osinfo.blocked == 0) {
|
|
isp->isp_osinfo.blocked = 1;
|
|
if (isp->isp_osinfo.thread) {
|
|
scsipi_channel_freeze(&isp->isp_chanA, 1);
|
|
}
|
|
}
|
|
/*
|
|
* Note that we have work for the thread to do, and
|
|
* if the thread is here already, wake it up.
|
|
*/
|
|
isp->isp_osinfo.threadwork++;
|
|
if (isp->isp_osinfo.thread) {
|
|
wakeup(&isp->isp_osinfo.thread);
|
|
} else {
|
|
isp_prt(isp, ISP_LOGDEBUG1, "no FC thread yet");
|
|
}
|
|
break;
|
|
case ISPASYNC_FABRIC_DEV:
|
|
{
|
|
int target, lrange;
|
|
struct lportdb *lp = NULL;
|
|
char *pt;
|
|
sns_ganrsp_t *resp = (sns_ganrsp_t *) arg;
|
|
u_int32_t portid;
|
|
u_int64_t wwpn, wwnn;
|
|
fcparam *fcp = isp->isp_param;
|
|
|
|
portid =
|
|
(((u_int32_t) resp->snscb_port_id[0]) << 16) |
|
|
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
|
|
(((u_int32_t) resp->snscb_port_id[2]));
|
|
|
|
wwpn =
|
|
(((u_int64_t)resp->snscb_portname[0]) << 56) |
|
|
(((u_int64_t)resp->snscb_portname[1]) << 48) |
|
|
(((u_int64_t)resp->snscb_portname[2]) << 40) |
|
|
(((u_int64_t)resp->snscb_portname[3]) << 32) |
|
|
(((u_int64_t)resp->snscb_portname[4]) << 24) |
|
|
(((u_int64_t)resp->snscb_portname[5]) << 16) |
|
|
(((u_int64_t)resp->snscb_portname[6]) << 8) |
|
|
(((u_int64_t)resp->snscb_portname[7]));
|
|
|
|
wwnn =
|
|
(((u_int64_t)resp->snscb_nodename[0]) << 56) |
|
|
(((u_int64_t)resp->snscb_nodename[1]) << 48) |
|
|
(((u_int64_t)resp->snscb_nodename[2]) << 40) |
|
|
(((u_int64_t)resp->snscb_nodename[3]) << 32) |
|
|
(((u_int64_t)resp->snscb_nodename[4]) << 24) |
|
|
(((u_int64_t)resp->snscb_nodename[5]) << 16) |
|
|
(((u_int64_t)resp->snscb_nodename[6]) << 8) |
|
|
(((u_int64_t)resp->snscb_nodename[7]));
|
|
if (portid == 0 || wwpn == 0) {
|
|
break;
|
|
}
|
|
|
|
switch (resp->snscb_port_type) {
|
|
case 1:
|
|
pt = " N_Port";
|
|
break;
|
|
case 2:
|
|
pt = " NL_Port";
|
|
break;
|
|
case 3:
|
|
pt = "F/NL_Port";
|
|
break;
|
|
case 0x7f:
|
|
pt = " Nx_Port";
|
|
break;
|
|
case 0x81:
|
|
pt = " F_port";
|
|
break;
|
|
case 0x82:
|
|
pt = " FL_Port";
|
|
break;
|
|
case 0x84:
|
|
pt = " E_port";
|
|
break;
|
|
default:
|
|
pt = "?";
|
|
break;
|
|
}
|
|
isp_prt(isp, ISP_LOGINFO,
|
|
"%s @ 0x%x, Node 0x%08x%08x Port %08x%08x",
|
|
pt, portid, ((u_int32_t) (wwnn >> 32)), ((u_int32_t) wwnn),
|
|
((u_int32_t) (wwpn >> 32)), ((u_int32_t) wwpn));
|
|
/*
|
|
* We're only interested in SCSI_FCP types (for now)
|
|
*/
|
|
if ((resp->snscb_fc4_types[2] & 1) == 0) {
|
|
break;
|
|
}
|
|
if (fcp->isp_topo != TOPO_F_PORT)
|
|
lrange = FC_SNS_ID+1;
|
|
else
|
|
lrange = 0;
|
|
/*
|
|
* Is it already in our list?
|
|
*/
|
|
for (target = lrange; target < MAX_FC_TARG; target++) {
|
|
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
|
|
continue;
|
|
}
|
|
lp = &fcp->portdb[target];
|
|
if (lp->port_wwn == wwpn && lp->node_wwn == wwnn) {
|
|
lp->fabric_dev = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (target < MAX_FC_TARG) {
|
|
break;
|
|
}
|
|
for (target = lrange; target < MAX_FC_TARG; target++) {
|
|
if (target >= FL_PORT_ID && target <= FC_SNS_ID) {
|
|
continue;
|
|
}
|
|
lp = &fcp->portdb[target];
|
|
if (lp->port_wwn == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if (target == MAX_FC_TARG) {
|
|
isp_prt(isp, ISP_LOGWARN,
|
|
"no more space for fabric devices");
|
|
break;
|
|
}
|
|
lp->node_wwn = wwnn;
|
|
lp->port_wwn = wwpn;
|
|
lp->portid = portid;
|
|
lp->fabric_dev = 1;
|
|
break;
|
|
}
|
|
case ISPASYNC_FW_CRASH:
|
|
{
|
|
u_int16_t mbox1, mbox6;
|
|
mbox1 = ISP_READ(isp, OUTMAILBOX1);
|
|
if (IS_DUALBUS(isp)) {
|
|
mbox6 = ISP_READ(isp, OUTMAILBOX6);
|
|
} else {
|
|
mbox6 = 0;
|
|
}
|
|
isp_prt(isp, ISP_LOGERR,
|
|
"Internal Firmware on bus %d Error @ RISC Address 0x%x",
|
|
mbox6, mbox1);
|
|
isp_reinit(isp);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
#include <machine/stdarg.h>
|
|
void
|
|
isp_prt(struct ispsoftc *isp, int level, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
if (level != ISP_LOGALL && (level & isp->isp_dblev) == 0) {
|
|
return;
|
|
}
|
|
printf("%s: ", isp->isp_name);
|
|
va_start(ap, fmt);
|
|
vprintf(fmt, ap);
|
|
va_end(ap);
|
|
printf("\n");
|
|
}
|