1792 lines
45 KiB
C
1792 lines
45 KiB
C
/* $NetBSD: auixp.c,v 1.27 2008/03/21 07:47:43 dyoung Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2004, 2005 Reinoud Zandijk <reinoud@netbsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
|
|
/*
|
|
* NetBSD audio driver for ATI IXP-{150,200,...} audio driver hardware.
|
|
*
|
|
* Recording and playback has been tested OK on various sample rates and
|
|
* encodings.
|
|
*
|
|
* Known problems and issues :
|
|
* - SPDIF is untested and needs some work still (LED stays off)
|
|
* - 32 bit audio playback failed last time i tried but that might an AC'97
|
|
* codec support problem.
|
|
* - 32 bit recording works but can't try out playing: see above.
|
|
* - no suspend/resume support yet.
|
|
* - multiple codecs are `supported' but not tested; the implemetation needs
|
|
* some cleaning up.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: auixp.c,v 1.27 2008/03/21 07:47:43 dyoung Exp $");
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/null.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/exec.h>
|
|
#include <sys/select.h>
|
|
#include <sys/audioio.h>
|
|
#include <sys/queue.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/intr.h>
|
|
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/audio_if.h>
|
|
#include <dev/mulaw.h>
|
|
#include <dev/auconv.h>
|
|
#include <dev/ic/ac97var.h>
|
|
#include <dev/ic/ac97reg.h>
|
|
|
|
#include <dev/pci/auixpreg.h>
|
|
#include <dev/pci/auixpvar.h>
|
|
|
|
|
|
/* #define DEBUG_AUIXP */
|
|
|
|
|
|
/* why isn't this base address register not in the headerfile? */
|
|
#define PCI_CBIO 0x10
|
|
|
|
|
|
/* macro's used */
|
|
#define KERNADDR(p) ((void *)((p)->addr))
|
|
#define DMAADDR(p) ((p)->map->dm_segs[0].ds_addr)
|
|
|
|
|
|
/* the differences might be irrelevant */
|
|
enum {
|
|
IXP_200,
|
|
IXP_300,
|
|
IXP_400
|
|
};
|
|
|
|
|
|
/* our `cards' */
|
|
static const struct auixp_card_type {
|
|
uint16_t pci_vendor_id;
|
|
uint16_t pci_product_id;
|
|
int type;
|
|
} auixp_card_types[] = {
|
|
{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_200, IXP_200 },
|
|
{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_300, IXP_300 },
|
|
{ PCI_VENDOR_ATI, PCI_PRODUCT_ATI_IXP_AUDIO_400, IXP_400 },
|
|
{ 0, 0, 0 }
|
|
};
|
|
|
|
|
|
struct audio_device auixp_device = {
|
|
"ATI IXP audio",
|
|
"",
|
|
"auixp"
|
|
};
|
|
|
|
|
|
/* codec detection constant indicating the interrupt flags */
|
|
#define ALL_CODECS_NOT_READY \
|
|
(ATI_REG_ISR_CODEC0_NOT_READY |\
|
|
ATI_REG_ISR_CODEC1_NOT_READY |\
|
|
ATI_REG_ISR_CODEC2_NOT_READY)
|
|
#define CODEC_CHECK_BITS (ALL_CODECS_NOT_READY|ATI_REG_ISR_NEW_FRAME)
|
|
|
|
|
|
/* autoconfig */
|
|
static int auixp_match(device_t, struct cfdata *, void *);
|
|
static void auixp_attach(device_t, device_t, void *);
|
|
static int auixp_detach(device_t, int);
|
|
|
|
|
|
/* audio(9) function prototypes */
|
|
static int auixp_query_encoding(void *, struct audio_encoding *);
|
|
static int auixp_set_params(void *, int, int, audio_params_t *,
|
|
audio_params_t *,
|
|
stream_filter_list_t *, stream_filter_list_t *);
|
|
static int auixp_commit_settings(void *);
|
|
static int auixp_round_blocksize(void *, int, int, const audio_params_t *);
|
|
static int auixp_trigger_output(void *, void *, void *, int,
|
|
void (*)(void *),
|
|
void *, const audio_params_t *);
|
|
static int auixp_trigger_input(void *, void *, void *, int,
|
|
void (*)(void *),
|
|
void *, const audio_params_t *);
|
|
static int auixp_halt_output(void *);
|
|
static int auixp_halt_input(void *);
|
|
static int auixp_set_port(void *, mixer_ctrl_t *);
|
|
static int auixp_get_port(void *, mixer_ctrl_t *);
|
|
static int auixp_query_devinfo(void *, mixer_devinfo_t *);
|
|
static void * auixp_malloc(void *, int, size_t, struct malloc_type *, int);
|
|
static void auixp_free(void *, void *, struct malloc_type *);
|
|
static int auixp_getdev(void *, struct audio_device *);
|
|
static size_t auixp_round_buffersize(void *, int, size_t);
|
|
static int auixp_get_props(void *);
|
|
static int auixp_intr(void *);
|
|
static int auixp_allocmem(struct auixp_softc *, size_t, size_t,
|
|
struct auixp_dma *);
|
|
static int auixp_freemem(struct auixp_softc *, struct auixp_dma *);
|
|
static paddr_t auixp_mappage(void *, void *, off_t, int);
|
|
|
|
/* Supporting subroutines */
|
|
static int auixp_init(struct auixp_softc *);
|
|
static void auixp_autodetect_codecs(struct auixp_softc *);
|
|
static void auixp_post_config(device_t);
|
|
|
|
static void auixp_reset_aclink(struct auixp_softc *);
|
|
static int auixp_attach_codec(void *, struct ac97_codec_if *);
|
|
static int auixp_read_codec(void *, uint8_t, uint16_t *);
|
|
static int auixp_write_codec(void *, uint8_t, uint16_t);
|
|
static int auixp_wait_for_codecs(struct auixp_softc *, const char *);
|
|
static int auixp_reset_codec(void *);
|
|
static enum ac97_host_flags auixp_flags_codec(void *);
|
|
|
|
static void auixp_enable_dma(struct auixp_softc *, struct auixp_dma *);
|
|
static void auixp_disable_dma(struct auixp_softc *, struct auixp_dma *);
|
|
static void auixp_enable_interrupts(struct auixp_softc *);
|
|
static void auixp_disable_interrupts(struct auixp_softc *);
|
|
|
|
|
|
/* statics */
|
|
static void auixp_link_daisychain(struct auixp_softc *,
|
|
struct auixp_dma *, struct auixp_dma *,
|
|
int, int);
|
|
static int auixp_allocate_dma_chain(struct auixp_softc *,
|
|
struct auixp_dma **);
|
|
static void auixp_program_dma_chain(struct auixp_softc *,
|
|
struct auixp_dma *);
|
|
static void auixp_dma_update(struct auixp_softc *, struct auixp_dma *);
|
|
static void auixp_update_busbusy(struct auixp_softc *);
|
|
|
|
static bool auixp_resume(device_t PMF_FN_PROTO);
|
|
|
|
|
|
#ifdef DEBUG_AUIXP
|
|
static struct auixp_softc *static_sc;
|
|
static void auixp_dumpreg(void);
|
|
# define DPRINTF(x) printf x;
|
|
#else
|
|
# define DPRINTF(x)
|
|
#endif
|
|
|
|
|
|
static const struct audio_hw_if auixp_hw_if = {
|
|
NULL, /* open */
|
|
NULL, /* close */
|
|
NULL, /* drain */
|
|
auixp_query_encoding,
|
|
auixp_set_params,
|
|
auixp_round_blocksize,
|
|
auixp_commit_settings,
|
|
NULL, /* init_output */
|
|
NULL, /* init_input */
|
|
NULL, /* start_output */
|
|
NULL, /* start_input */
|
|
auixp_halt_output,
|
|
auixp_halt_input,
|
|
NULL, /* speaker_ctl */
|
|
auixp_getdev,
|
|
NULL, /* getfd */
|
|
auixp_set_port,
|
|
auixp_get_port,
|
|
auixp_query_devinfo,
|
|
auixp_malloc,
|
|
auixp_free,
|
|
auixp_round_buffersize,
|
|
auixp_mappage,
|
|
auixp_get_props,
|
|
auixp_trigger_output,
|
|
auixp_trigger_input,
|
|
NULL, /* dev_ioctl */
|
|
NULL, /* powerstate */
|
|
};
|
|
|
|
|
|
CFATTACH_DECL(auixp, sizeof(struct auixp_softc), auixp_match, auixp_attach,
|
|
auixp_detach, NULL);
|
|
|
|
|
|
/*
|
|
* audio(9) functions
|
|
*/
|
|
|
|
static int
|
|
auixp_query_encoding(void *hdl, struct audio_encoding *ae)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
return auconv_query_encoding(sc->sc_encodings, ae);
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_set_rate(struct auixp_codec *co, int mode, u_int srate)
|
|
{
|
|
int ret;
|
|
u_int ratetmp;
|
|
|
|
ratetmp = srate;
|
|
if (mode == AUMODE_RECORD) {
|
|
ret = co->codec_if->vtbl->set_rate(co->codec_if,
|
|
AC97_REG_PCM_LR_ADC_RATE, &ratetmp);
|
|
return ret;
|
|
}
|
|
|
|
/* play mode */
|
|
ret = co->codec_if->vtbl->set_rate(co->codec_if,
|
|
AC97_REG_PCM_FRONT_DAC_RATE, &ratetmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ratetmp = srate;
|
|
ret = co->codec_if->vtbl->set_rate(co->codec_if,
|
|
AC97_REG_PCM_SURR_DAC_RATE, &ratetmp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ratetmp = srate;
|
|
ret = co->codec_if->vtbl->set_rate(co->codec_if,
|
|
AC97_REG_PCM_LFE_DAC_RATE, &ratetmp);
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* commit setting and program ATI IXP chip */
|
|
static int
|
|
auixp_commit_settings(void *hdl)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
struct audio_params *params;
|
|
uint32_t value;
|
|
|
|
/* XXX would it be better to stop interrupts first? XXX */
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
/* process input settings */
|
|
params = &sc->sc_play_params;
|
|
|
|
/* set input interleaving (precision) */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value &= ~ATI_REG_CMD_INTERLEAVE_IN;
|
|
if (params->precision <= 16)
|
|
value |= ATI_REG_CMD_INTERLEAVE_IN;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* process output settings */
|
|
params = &sc->sc_play_params;
|
|
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_OUT_DMA_SLOT);
|
|
value &= ~ATI_REG_OUT_DMA_SLOT_MASK;
|
|
|
|
/* TODO SPDIF case for 8 channels */
|
|
switch (params->channels) {
|
|
case 6:
|
|
value |= ATI_REG_OUT_DMA_SLOT_BIT(7) |
|
|
ATI_REG_OUT_DMA_SLOT_BIT(8);
|
|
/* fallthru */
|
|
case 4:
|
|
value |= ATI_REG_OUT_DMA_SLOT_BIT(6) |
|
|
ATI_REG_OUT_DMA_SLOT_BIT(9);
|
|
/* fallthru */
|
|
default:
|
|
value |= ATI_REG_OUT_DMA_SLOT_BIT(3) |
|
|
ATI_REG_OUT_DMA_SLOT_BIT(4);
|
|
break;
|
|
}
|
|
/* set output threshold */
|
|
value |= 0x04 << ATI_REG_OUT_DMA_THRESHOLD_SHIFT;
|
|
bus_space_write_4(iot, ioh, ATI_REG_OUT_DMA_SLOT, value);
|
|
|
|
/* set output interleaving (precision) */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value &= ~ATI_REG_CMD_INTERLEAVE_OUT;
|
|
if (params->precision <= 16)
|
|
value |= ATI_REG_CMD_INTERLEAVE_OUT;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* enable 6 channel reordering */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_6CH_REORDER);
|
|
value &= ~ATI_REG_6CH_REORDER_EN;
|
|
if (params->channels == 6)
|
|
value |= ATI_REG_6CH_REORDER_EN;
|
|
bus_space_write_4(iot, ioh, ATI_REG_6CH_REORDER, value);
|
|
|
|
if (sc->has_spdif) {
|
|
/* set SPDIF (if present) */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value &= ~ATI_REG_CMD_SPDF_CONFIG_MASK;
|
|
value |= ATI_REG_CMD_SPDF_CONFIG_34; /* NetBSD AC'97 default */
|
|
|
|
/* XXX this prolly is not nessisary unless splitted XXX */
|
|
value &= ~ATI_REG_CMD_INTERLEAVE_SPDF;
|
|
if (params->precision <= 16)
|
|
value |= ATI_REG_CMD_INTERLEAVE_SPDF;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* set audio properties in desired setting */
|
|
static int
|
|
auixp_set_params(void *hdl, int setmode, int usemode,
|
|
audio_params_t *play, audio_params_t *rec, stream_filter_list_t *pfil,
|
|
stream_filter_list_t *rfil)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
audio_params_t *params;
|
|
stream_filter_list_t *fil;
|
|
int mode, index;
|
|
|
|
/*
|
|
* In current NetBSD AC'97 implementation, SPDF is linked to channel 3
|
|
* and 4 i.e. stereo output.
|
|
*/
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
for (mode = AUMODE_RECORD; mode != -1;
|
|
mode = (mode == AUMODE_RECORD) ? AUMODE_PLAY : -1) {
|
|
if ((setmode & mode) == 0)
|
|
continue;
|
|
|
|
params = (mode == AUMODE_PLAY) ? play : rec;
|
|
fil = (mode == AUMODE_PLAY) ? pfil : rfil;
|
|
if (params == NULL)
|
|
continue;
|
|
|
|
/* AD1888 settings ... don't know the IXP limits */
|
|
if (params->sample_rate < AUIXP_MINRATE)
|
|
return EINVAL;
|
|
if (params->sample_rate > AUIXP_MAXRATE)
|
|
return EINVAL;
|
|
|
|
index = auconv_set_converter(sc->sc_formats, AUIXP_NFORMATS,
|
|
mode, params, TRUE, fil);
|
|
|
|
/* nothing found? */
|
|
if (index < 0)
|
|
return EINVAL;
|
|
|
|
/* not sure yet as to why i have to change params here */
|
|
if (fil->req_size > 0)
|
|
params = &fil->filters[0].param;
|
|
|
|
/* if variable speed and we can't set the desired rate, fail */
|
|
if ((sc->sc_formats[index].frequency_type != 1) &&
|
|
auixp_set_rate(co, mode, params->sample_rate))
|
|
return EINVAL;
|
|
|
|
/* preserve the settings */
|
|
if (mode == AUMODE_PLAY)
|
|
sc->sc_play_params = *params;
|
|
if (mode == AUMODE_RECORD)
|
|
sc->sc_rec_params = *params;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* called to translate a requested blocksize to a hw-possible one */
|
|
static int
|
|
auixp_round_blocksize(void *hdl, int bs, int mode,
|
|
const audio_params_t *param)
|
|
{
|
|
uint32_t new_bs;
|
|
|
|
new_bs = bs;
|
|
/* Be conservative; align to 32 bytes and maximise it to 64 kb */
|
|
/* 256 kb possible */
|
|
if (new_bs > 0x10000)
|
|
bs = 0x10000; /* 64 kb max */
|
|
new_bs = (bs & ~0x20); /* 32 bytes align */
|
|
|
|
return new_bs;
|
|
}
|
|
|
|
|
|
/*
|
|
* allocate dma capable memory and record its information for later retrieval
|
|
* when we program the dma chain itself. The trigger routines passes on the
|
|
* kernel virtual address we return here as a reference to the mapping.
|
|
*/
|
|
static void *
|
|
auixp_malloc(void *hdl, int direction, size_t size,
|
|
struct malloc_type *type, int flags)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *dma;
|
|
int error;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
/* get us a auixp_dma structure */
|
|
dma = malloc(sizeof(*dma), type, flags);
|
|
if (!dma)
|
|
return NULL;
|
|
|
|
/* get us a dma buffer itself */
|
|
error = auixp_allocmem(sc, size, 16, dma);
|
|
if (error) {
|
|
free(dma, type);
|
|
printf("%s: auixp_malloc: not enough memory\n",
|
|
sc->sc_dev.dv_xname);
|
|
|
|
return NULL;
|
|
}
|
|
SLIST_INSERT_HEAD(&sc->sc_dma_list, dma, dma_chain);
|
|
|
|
DPRINTF(("auixp_malloc: returning kern %p, hw 0x%08x for %d bytes "
|
|
"in %d segs\n", KERNADDR(dma), (uint32_t) DMAADDR(dma), dma->size,
|
|
dma->nsegs)
|
|
);
|
|
|
|
return KERNADDR(dma);
|
|
}
|
|
|
|
|
|
/*
|
|
* free and release dma capable memory we allocated before and remove its
|
|
* recording
|
|
*/
|
|
static void
|
|
auixp_free(void *hdl, void *addr, struct malloc_type *type)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *dma;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
SLIST_FOREACH(dma, &sc->sc_dma_list, dma_chain) {
|
|
if (KERNADDR(dma) == addr) {
|
|
SLIST_REMOVE(&sc->sc_dma_list, dma, auixp_dma,
|
|
dma_chain);
|
|
auixp_freemem(sc, dma);
|
|
free(dma, type);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_getdev(void *hdl, struct audio_device *ret)
|
|
{
|
|
|
|
*ret = auixp_device;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* pass request to AC'97 codec code */
|
|
static int
|
|
auixp_set_port(void *hdl, mixer_ctrl_t *mc)
|
|
{
|
|
struct auixp_codec *co;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
return co->codec_if->vtbl->mixer_set_port(co->codec_if, mc);
|
|
}
|
|
|
|
|
|
/* pass request to AC'97 codec code */
|
|
static int
|
|
auixp_get_port(void *hdl, mixer_ctrl_t *mc)
|
|
{
|
|
struct auixp_codec *co;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
return co->codec_if->vtbl->mixer_get_port(co->codec_if, mc);
|
|
}
|
|
|
|
/* pass request to AC'97 codec code */
|
|
static int
|
|
auixp_query_devinfo(void *hdl, mixer_devinfo_t *di)
|
|
{
|
|
struct auixp_codec *co;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
return co->codec_if->vtbl->query_devinfo(co->codec_if, di);
|
|
}
|
|
|
|
|
|
static size_t
|
|
auixp_round_buffersize(void *hdl, int direction,
|
|
size_t bufsize)
|
|
{
|
|
|
|
/* XXX force maximum? i.e. 256 kb? */
|
|
return bufsize;
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_get_props(void *hdl)
|
|
{
|
|
|
|
return AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX;
|
|
}
|
|
|
|
|
|
/*
|
|
* A dma descriptor has dma->nsegs segments defined in dma->segs set up when
|
|
* we claimed the memory.
|
|
*
|
|
* Due to our demand for one contiguous DMA area, we only have one segment. A
|
|
* c_dma structure is about 3 kb for the 256 entries we maximally program
|
|
* -arbitrary limit AFAIK- so all is most likely to be in one segment/page
|
|
* anyway.
|
|
*
|
|
* XXX ought to implement fragmented dma area XXX
|
|
*
|
|
* Note that _v variables depict kernel virtual addresses, _p variables depict
|
|
* physical addresses.
|
|
*/
|
|
static void
|
|
auixp_link_daisychain(struct auixp_softc *sc,
|
|
struct auixp_dma *c_dma, struct auixp_dma *s_dma,
|
|
int blksize, int blocks)
|
|
{
|
|
atiixp_dma_desc_t *caddr_v, *next_caddr_v;
|
|
uint32_t caddr_p, next_caddr_p, saddr_p;
|
|
int i;
|
|
|
|
/* just make sure we are not changing when its running */
|
|
auixp_disable_dma(sc, c_dma);
|
|
|
|
/* setup dma chain start addresses */
|
|
caddr_v = KERNADDR(c_dma);
|
|
caddr_p = DMAADDR(c_dma);
|
|
saddr_p = DMAADDR(s_dma);
|
|
|
|
/* program the requested number of blocks */
|
|
for (i = 0; i < blocks; i++) {
|
|
/* clear the block just in case */
|
|
bzero(caddr_v, sizeof(atiixp_dma_desc_t));
|
|
|
|
/* round robin the chain dma addresses for its successor */
|
|
next_caddr_v = caddr_v + 1;
|
|
next_caddr_p = caddr_p + sizeof(atiixp_dma_desc_t);
|
|
|
|
if (i == blocks-1) {
|
|
next_caddr_v = KERNADDR(c_dma);
|
|
next_caddr_p = DMAADDR(c_dma);
|
|
}
|
|
|
|
/* fill in the hardware dma chain descriptor in little-endian */
|
|
caddr_v->addr = htole32(saddr_p);
|
|
caddr_v->status = htole16(0);
|
|
caddr_v->size = htole16((blksize >> 2)); /* in dwords (!!!) */
|
|
caddr_v->next = htole32(next_caddr_p);
|
|
|
|
/* advance slot */
|
|
saddr_p += blksize; /* XXX assuming contiguous XXX */
|
|
caddr_v = next_caddr_v;
|
|
caddr_p = next_caddr_p;
|
|
}
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_allocate_dma_chain(struct auixp_softc *sc, struct auixp_dma **dmap)
|
|
{
|
|
struct auixp_dma *dma;
|
|
int error;
|
|
|
|
/* allocate keeper of dma area */
|
|
*dmap = NULL;
|
|
dma = malloc(sizeof(struct auixp_dma), M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (!dma)
|
|
return ENOMEM;
|
|
|
|
/* allocate for daisychain of IXP hardware-dma descriptors */
|
|
error = auixp_allocmem(sc, DMA_DESC_CHAIN * sizeof(atiixp_dma_desc_t),
|
|
16, dma);
|
|
if (error) {
|
|
printf("%s: can't malloc dma descriptor chain\n",
|
|
sc->sc_dev.dv_xname);
|
|
free(dma, M_DEVBUF);
|
|
return ENOMEM;
|
|
}
|
|
|
|
/* return info and initialise structure */
|
|
dma->intr = NULL;
|
|
dma->intrarg = NULL;
|
|
|
|
*dmap = dma;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* program dma chain in it's link address descriptor */
|
|
static void
|
|
auixp_program_dma_chain(struct auixp_softc *sc, struct auixp_dma *dma)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* get hardware start address of DMA chain and set valid-flag in it */
|
|
/* XXX always at start? XXX */
|
|
value = DMAADDR(dma);
|
|
value = value | ATI_REG_LINKPTR_EN;
|
|
|
|
/* reset linkpointer */
|
|
bus_space_write_4(iot, ioh, dma->linkptr, 0);
|
|
|
|
/* reset this DMA engine */
|
|
auixp_disable_dma(sc, dma);
|
|
auixp_enable_dma(sc, dma);
|
|
|
|
/* program new DMA linkpointer */
|
|
bus_space_write_4(iot, ioh, dma->linkptr, value);
|
|
}
|
|
|
|
|
|
/* called from interrupt code to signal end of one dma-slot */
|
|
static void
|
|
auixp_dma_update(struct auixp_softc *sc, struct auixp_dma *dma)
|
|
{
|
|
|
|
/* be very paranoid */
|
|
if (!dma)
|
|
panic("%s: update: dma = NULL", sc->sc_dev.dv_xname);
|
|
if (!dma->intr)
|
|
panic("%s: update: dma->intr = NULL", sc->sc_dev.dv_xname);
|
|
|
|
/* request more input from upper layer */
|
|
(*dma->intr)(dma->intrarg);
|
|
}
|
|
|
|
|
|
/*
|
|
* The magic `busbusy' bit that needs to be set when dma is active; allowing
|
|
* busmastering?
|
|
*/
|
|
static void
|
|
auixp_update_busbusy(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
int running;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* set bus-busy flag when either recording or playing is performed */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_IER);
|
|
value &= ~ATI_REG_IER_SET_BUS_BUSY;
|
|
|
|
running = ((sc->sc_output_dma->running) || (sc->sc_input_dma->running));
|
|
if (running)
|
|
value |= ATI_REG_IER_SET_BUS_BUSY;
|
|
|
|
bus_space_write_4(iot, ioh, ATI_REG_IER, value);
|
|
|
|
}
|
|
|
|
|
|
/*
|
|
* Called from upper audio layer to request playing audio, only called once;
|
|
* audio is refilled by calling the intr() function when space is available
|
|
* again.
|
|
*/
|
|
/* XXX allmost literaly a copy of trigger-input; could be factorised XXX */
|
|
static int
|
|
auixp_trigger_output(void *hdl, void *start, void *end, int blksize,
|
|
void (*intr)(void *), void *intrarg, const audio_params_t *param)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *chain_dma;
|
|
struct auixp_dma *sound_dma;
|
|
uint32_t blocks;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
chain_dma = sc->sc_output_dma;
|
|
/* add functions to call back */
|
|
chain_dma->intr = intr;
|
|
chain_dma->intrarg = intrarg;
|
|
|
|
/*
|
|
* Program output DMA chain with blocks from [start...end] with
|
|
* blksize fragments.
|
|
*
|
|
* NOTE, we can assume its in one block since we asked for it to be in
|
|
* one contiguous blob; XXX change this? XXX
|
|
*/
|
|
blocks = (size_t) (((char *) end) - ((char *) start)) / blksize;
|
|
|
|
/* lookup `start' address in our list of DMA area's */
|
|
SLIST_FOREACH(sound_dma, &sc->sc_dma_list, dma_chain) {
|
|
if (KERNADDR(sound_dma) == start)
|
|
break;
|
|
}
|
|
|
|
/* not ours ? then bail out */
|
|
if (!sound_dma) {
|
|
printf("%s: auixp_trigger_output: bad sound addr %p\n",
|
|
sc->sc_dev.dv_xname, start);
|
|
return EINVAL;
|
|
}
|
|
|
|
/* link round-robin daisychain and program hardware */
|
|
auixp_link_daisychain(sc, chain_dma, sound_dma, blksize, blocks);
|
|
auixp_program_dma_chain(sc, chain_dma);
|
|
|
|
/* mark we are now able to run now */
|
|
chain_dma->running = 1;
|
|
|
|
/* update bus-flags; XXX programs more flags XXX */
|
|
auixp_update_busbusy(sc);
|
|
|
|
/* callbacks happen in interrupt routine */
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* halt output of audio, just disable it's dma and update bus state */
|
|
static int
|
|
auixp_halt_output(void *hdl)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *dma;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
dma = sc->sc_output_dma;
|
|
auixp_disable_dma(sc, dma);
|
|
|
|
dma->running = 0;
|
|
auixp_update_busbusy(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* XXX allmost literaly a copy of trigger-output; could be factorised XXX */
|
|
static int
|
|
auixp_trigger_input(void *hdl, void *start, void *end, int blksize,
|
|
void (*intr)(void *), void *intrarg, const audio_params_t *param)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *chain_dma;
|
|
struct auixp_dma *sound_dma;
|
|
uint32_t blocks;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
chain_dma = sc->sc_input_dma;
|
|
/* add functions to call back */
|
|
chain_dma->intr = intr;
|
|
chain_dma->intrarg = intrarg;
|
|
|
|
/*
|
|
* Program output DMA chain with blocks from [start...end] with
|
|
* blksize fragments.
|
|
*
|
|
* NOTE, we can assume its in one block since we asked for it to be in
|
|
* one contiguous blob; XXX change this? XXX
|
|
*/
|
|
blocks = (size_t) (((char *) end) - ((char *) start)) / blksize;
|
|
|
|
/* lookup `start' address in our list of DMA area's */
|
|
SLIST_FOREACH(sound_dma, &sc->sc_dma_list, dma_chain) {
|
|
if (KERNADDR(sound_dma) == start)
|
|
break;
|
|
}
|
|
|
|
/* not ours ? then bail out */
|
|
if (!sound_dma) {
|
|
printf("%s: auixp_trigger_input: bad sound addr %p\n",
|
|
sc->sc_dev.dv_xname, start);
|
|
return EINVAL;
|
|
}
|
|
|
|
/* link round-robin daisychain and program hardware */
|
|
auixp_link_daisychain(sc, chain_dma, sound_dma, blksize, blocks);
|
|
auixp_program_dma_chain(sc, chain_dma);
|
|
|
|
/* mark we are now able to run now */
|
|
chain_dma->running = 1;
|
|
|
|
/* update bus-flags; XXX programs more flags XXX */
|
|
auixp_update_busbusy(sc);
|
|
|
|
/* callbacks happen in interrupt routine */
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* halt sampling audio, just disable it's dma and update bus state */
|
|
static int
|
|
auixp_halt_input(void *hdl)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *dma;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
dma = sc->sc_input_dma;
|
|
auixp_disable_dma(sc, dma);
|
|
|
|
dma->running = 0;
|
|
auixp_update_busbusy(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* IXP audio interrupt handler
|
|
*
|
|
* note that we return the number of bits handled; the return value is not
|
|
* documentated but i saw it implemented in other drivers. Prolly returning a
|
|
* value > 0 means "i've dealt with it"
|
|
*
|
|
*/
|
|
static int
|
|
auixp_intr(void *softc)
|
|
{
|
|
struct auixp_softc *sc;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t status, enable, detected_codecs;
|
|
int ret;
|
|
|
|
sc = softc;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
ret = 0;
|
|
/* get status from the interrupt status register */
|
|
status = bus_space_read_4(iot, ioh, ATI_REG_ISR);
|
|
|
|
if (status == 0)
|
|
return 0;
|
|
|
|
DPRINTF(("%s: (status = %x)\n", sc->sc_dev.dv_xname, status));
|
|
|
|
/* check DMA UPDATE flags for input & output */
|
|
if (status & ATI_REG_ISR_IN_STATUS) {
|
|
ret++; DPRINTF(("IN_STATUS\n"));
|
|
auixp_dma_update(sc, sc->sc_input_dma);
|
|
}
|
|
if (status & ATI_REG_ISR_OUT_STATUS) {
|
|
ret++; DPRINTF(("OUT_STATUS\n"));
|
|
auixp_dma_update(sc, sc->sc_output_dma);
|
|
}
|
|
|
|
/* XXX XRUN flags not used/needed yet; should i implement it? XXX */
|
|
/* acknowledge the interrupts nevertheless */
|
|
if (status & ATI_REG_ISR_IN_XRUN) {
|
|
ret++; DPRINTF(("IN_XRUN\n"));
|
|
/* auixp_dma_xrun(sc, sc->sc_input_dma); */
|
|
}
|
|
if (status & ATI_REG_ISR_OUT_XRUN) {
|
|
ret++; DPRINTF(("OUT_XRUN\n"));
|
|
/* auixp_dma_xrun(sc, sc->sc_output_dma); */
|
|
}
|
|
|
|
/* check if we are looking for codec detection */
|
|
if (status & CODEC_CHECK_BITS) {
|
|
ret++;
|
|
/* mark missing codecs as not ready */
|
|
detected_codecs = status & CODEC_CHECK_BITS;
|
|
sc->sc_codec_not_ready_bits |= detected_codecs;
|
|
|
|
/* disable detected interupt sources */
|
|
enable = bus_space_read_4(iot, ioh, ATI_REG_IER);
|
|
enable &= ~detected_codecs;
|
|
bus_space_write_4(iot, ioh, ATI_REG_IER, enable);
|
|
}
|
|
|
|
/* acknowledge interrupt sources */
|
|
bus_space_write_4(iot, ioh, ATI_REG_ISR, status);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* allocate memory for dma purposes; on failure of any of the steps, roll back */
|
|
static int
|
|
auixp_allocmem(struct auixp_softc *sc, size_t size,
|
|
size_t align, struct auixp_dma *dma)
|
|
{
|
|
int error;
|
|
|
|
/* remember size */
|
|
dma->size = size;
|
|
|
|
/* allocate DMA safe memory but in just one segment for now :( */
|
|
error = bus_dmamem_alloc(sc->sc_dmat, dma->size, align, 0,
|
|
dma->segs, sizeof(dma->segs) / sizeof(dma->segs[0]), &dma->nsegs,
|
|
BUS_DMA_NOWAIT);
|
|
if (error)
|
|
return error;
|
|
|
|
/*
|
|
* map allocated memory into kernel virtual address space and keep it
|
|
* coherent with the CPU.
|
|
*/
|
|
error = bus_dmamem_map(sc->sc_dmat, dma->segs, dma->nsegs, dma->size,
|
|
&dma->addr, BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
|
|
if (error)
|
|
goto free;
|
|
|
|
/* allocate associated dma handle and initialize it. */
|
|
error = bus_dmamap_create(sc->sc_dmat, dma->size, 1, dma->size, 0,
|
|
BUS_DMA_NOWAIT, &dma->map);
|
|
if (error)
|
|
goto unmap;
|
|
|
|
/*
|
|
* load the dma handle with mappings for a dma transfer; all pages
|
|
* need to be wired.
|
|
*/
|
|
error = bus_dmamap_load(sc->sc_dmat, dma->map, dma->addr, dma->size, NULL,
|
|
BUS_DMA_NOWAIT);
|
|
if (error)
|
|
goto destroy;
|
|
|
|
return 0;
|
|
|
|
destroy:
|
|
bus_dmamap_destroy(sc->sc_dmat, dma->map);
|
|
unmap:
|
|
bus_dmamem_unmap(sc->sc_dmat, dma->addr, dma->size);
|
|
free:
|
|
bus_dmamem_free(sc->sc_dmat, dma->segs, dma->nsegs);
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/* undo dma mapping and release memory allocated */
|
|
static int
|
|
auixp_freemem(struct auixp_softc *sc, struct auixp_dma *p)
|
|
{
|
|
|
|
bus_dmamap_unload(sc->sc_dmat, p->map);
|
|
bus_dmamap_destroy(sc->sc_dmat, p->map);
|
|
bus_dmamem_unmap(sc->sc_dmat, p->addr, p->size);
|
|
bus_dmamem_free(sc->sc_dmat, p->segs, p->nsegs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* memory map dma memory */
|
|
static paddr_t
|
|
auixp_mappage(void *hdl, void *mem, off_t off, int prot)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
struct auixp_dma *p;
|
|
|
|
co = (struct auixp_codec *) hdl;
|
|
sc = co->sc;
|
|
/* for sanity */
|
|
if (off < 0)
|
|
return -1;
|
|
|
|
/* look up allocated DMA area */
|
|
SLIST_FOREACH(p, &sc->sc_dma_list, dma_chain) {
|
|
if (KERNADDR(p) == mem)
|
|
break;
|
|
}
|
|
|
|
/* have we found it ? */
|
|
if (!p)
|
|
return -1;
|
|
|
|
/* return mmap'd region */
|
|
return bus_dmamem_mmap(sc->sc_dmat, p->segs, p->nsegs,
|
|
off, prot, BUS_DMA_WAITOK);
|
|
}
|
|
|
|
|
|
/*
|
|
* Attachment section
|
|
*/
|
|
|
|
/* Is it my hardware? */
|
|
static int
|
|
auixp_match(device_t dev, struct cfdata *match, void *aux)
|
|
{
|
|
struct pci_attach_args *pa;
|
|
|
|
pa = (struct pci_attach_args *)aux;
|
|
switch(PCI_VENDOR(pa->pa_id)) {
|
|
case PCI_VENDOR_ATI:
|
|
switch(PCI_PRODUCT(pa->pa_id)) {
|
|
case PCI_PRODUCT_ATI_IXP_AUDIO_200:
|
|
case PCI_PRODUCT_ATI_IXP_AUDIO_300:
|
|
case PCI_PRODUCT_ATI_IXP_AUDIO_400:
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* it is... now hook up and set up the resources we need */
|
|
static void
|
|
auixp_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct auixp_softc *sc;
|
|
struct pci_attach_args *pa;
|
|
pcitag_t tag;
|
|
pci_chipset_tag_t pc;
|
|
pci_intr_handle_t ih;
|
|
const struct auixp_card_type *card;
|
|
const char *intrstr;
|
|
uint32_t data;
|
|
char devinfo[256];
|
|
int revision, error;
|
|
|
|
sc = device_private(self);
|
|
pa = (struct pci_attach_args *)aux;
|
|
tag = pa->pa_tag;
|
|
pc = pa->pa_pc;
|
|
#ifdef DEBUG_AUIXP
|
|
static_sc = sc;
|
|
#endif
|
|
|
|
/* print information confirming attachment */
|
|
aprint_naive(": Audio controller\n");
|
|
|
|
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo));
|
|
revision = PCI_REVISION(pa->pa_class);
|
|
aprint_normal(": %s (rev. 0x%02x)\n", devinfo, revision);
|
|
|
|
/* set up details from our set of known `cards'/chips */
|
|
for (card = auixp_card_types; card->pci_vendor_id; card++)
|
|
if (PCI_VENDOR(pa->pa_id) == card->pci_vendor_id &&
|
|
PCI_PRODUCT(pa->pa_id) == card->pci_product_id) {
|
|
sc->type = card->type;
|
|
break;
|
|
}
|
|
|
|
/* device only has 32 bit non prefetchable memory */
|
|
/* set MEM space access and enable the card's busmastering */
|
|
data = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
|
|
data |= (PCI_COMMAND_MEM_ENABLE | PCI_COMMAND_MASTER_ENABLE);
|
|
pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, data);
|
|
|
|
/* map memory; its not sized -> what is the size? max PCI slot size? */
|
|
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_MEM, 0,
|
|
&sc->sc_iot, &sc->sc_ioh, &sc->sc_iob, &sc->sc_ios)) {
|
|
aprint_error("%s: can't map memory space\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* Initialize softc */
|
|
sc->sc_tag = tag;
|
|
sc->sc_pct = pc;
|
|
sc->sc_dmat = pa->pa_dmat;
|
|
SLIST_INIT(&sc->sc_dma_list);
|
|
|
|
/* get us the auixp_dma structures */
|
|
auixp_allocate_dma_chain(sc, &sc->sc_output_dma);
|
|
auixp_allocate_dma_chain(sc, &sc->sc_input_dma);
|
|
|
|
/* when that fails we are dead in the water */
|
|
if (!sc->sc_output_dma || !sc->sc_input_dma)
|
|
return;
|
|
|
|
#if 0
|
|
/* could preliminary program DMA chain */
|
|
auixp_program_dma_chain(sc, sc->sc_output_dma);
|
|
auixp_program_dma_chain(sc, sc->sc_input_dma);
|
|
#endif
|
|
|
|
/* map interrupt on the pci bus */
|
|
if (pci_intr_map(pa, &ih)) {
|
|
aprint_error("%s: can't map interrupt\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* where are we connected at ? */
|
|
intrstr = pci_intr_string(pc, ih);
|
|
|
|
/* establish interrupt routine hookup at IPL_AUDIO level */
|
|
sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, auixp_intr, self);
|
|
if (sc->sc_ih == NULL) {
|
|
aprint_error("%s: can't establish interrupt",
|
|
sc->sc_dev.dv_xname);
|
|
if (intrstr != NULL)
|
|
aprint_normal(" at %s", intrstr);
|
|
aprint_normal("\n");
|
|
return;
|
|
}
|
|
aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
|
|
|
|
/* power up chip */
|
|
if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
|
|
pci_activate_null)) && error != EOPNOTSUPP) {
|
|
aprint_error("%s: cannot activate %d\n", sc->sc_dev.dv_xname,
|
|
error);
|
|
return;
|
|
}
|
|
|
|
/* init chip */
|
|
if (auixp_init(sc) == -1) {
|
|
aprint_error("%s: auixp_attach: unable to initialize the card\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
if (!pmf_device_register(self, NULL, auixp_resume))
|
|
aprint_error_dev(self, "couldn't establish power handler\n");
|
|
|
|
/*
|
|
* delay further configuration of codecs and audio after interrupts
|
|
* are enabled.
|
|
*/
|
|
config_interrupts(self, auixp_post_config);
|
|
}
|
|
|
|
|
|
/* called from autoconfigure system when interrupts are enabled */
|
|
static void
|
|
auixp_post_config(device_t self)
|
|
{
|
|
struct auixp_softc *sc;
|
|
struct auixp_codec *codec;
|
|
int codec_nr;
|
|
int res, i;
|
|
|
|
sc = device_private(self);
|
|
/* detect the AC97 codecs */
|
|
auixp_autodetect_codecs(sc);
|
|
|
|
/* setup audio translation formats : following codec0 (!) */
|
|
codec = &sc->sc_codec[0];
|
|
if (!codec->present) {
|
|
/* nothing??? then invalidate all formats */
|
|
for (i = 0; i < AUIXP_NFORMATS; i++) {
|
|
AUFMT_INVALIDATE(&sc->sc_formats[i]);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* copy formats and invalidate entries not suitable for codec0 */
|
|
memcpy(sc->sc_formats, auixp_formats, sizeof(auixp_formats));
|
|
sc->has_4ch = AC97_IS_4CH(codec->codec_if);
|
|
sc->has_6ch = AC97_IS_6CH(codec->codec_if);
|
|
sc->is_fixed = AC97_IS_FIXED_RATE(codec->codec_if);
|
|
sc->has_spdif = AC97_HAS_SPDIF(codec->codec_if);
|
|
|
|
for (i = 0; i < AUIXP_NFORMATS; i++) {
|
|
if (sc->is_fixed) {
|
|
sc->sc_formats[i].frequency_type = 1;
|
|
sc->sc_formats[i].frequency[0] = 48000;
|
|
}
|
|
switch (sc->sc_formats[i].channels) {
|
|
case 4 :
|
|
if (sc->has_4ch)
|
|
break;
|
|
AUFMT_INVALIDATE(&sc->sc_formats[i]);
|
|
break;
|
|
case 6 :
|
|
if (sc->has_6ch)
|
|
break;
|
|
AUFMT_INVALIDATE(&sc->sc_formats[i]);
|
|
break;
|
|
default :
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Create all encodings (and/or -translations) based on the formats
|
|
* supported. */
|
|
res = auconv_create_encodings(sc->sc_formats, AUIXP_NFORMATS,
|
|
&sc->sc_encodings);
|
|
if (res) {
|
|
printf("%s: auconv_create_encodings failed; "
|
|
"no attachments\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
/* attach audio devices for all detected codecs */
|
|
/* XXX wise? look at other multiple-codec able chipsets XXX */
|
|
for (codec_nr = 0; codec_nr < ATI_IXP_CODECS; codec_nr++) {
|
|
codec = &sc->sc_codec[codec_nr];
|
|
if (codec->present)
|
|
audio_attach_mi(&auixp_hw_if, codec, &sc->sc_dev);
|
|
}
|
|
|
|
if (sc->has_spdif) {
|
|
aprint_normal("%s: codec spdif support detected but disabled "
|
|
"for now\n", sc->sc_dev.dv_xname);
|
|
sc->has_spdif = 0;
|
|
}
|
|
|
|
/* fill in the missing details about the dma channels. */
|
|
/* for output */
|
|
sc->sc_output_dma->linkptr = ATI_REG_OUT_DMA_LINKPTR;
|
|
sc->sc_output_dma->dma_enable_bit = ATI_REG_CMD_OUT_DMA_EN |
|
|
ATI_REG_CMD_SEND_EN;
|
|
/* have spdif? then this too! XXX not seeing LED yet! XXX */
|
|
if (sc->has_spdif)
|
|
sc->sc_output_dma->dma_enable_bit |= ATI_REG_CMD_SPDF_OUT_EN;
|
|
|
|
/* and for input */
|
|
sc->sc_input_dma->linkptr = ATI_REG_IN_DMA_LINKPTR;
|
|
sc->sc_input_dma->dma_enable_bit = ATI_REG_CMD_IN_DMA_EN |
|
|
ATI_REG_CMD_RECEIVE_EN;
|
|
|
|
/* done! now enable all interrupts we can service */
|
|
auixp_enable_interrupts(sc);
|
|
}
|
|
|
|
|
|
static void
|
|
auixp_enable_interrupts(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* clear all pending */
|
|
bus_space_write_4(iot, ioh, ATI_REG_ISR, 0xffffffff);
|
|
|
|
/* enable all relevant interrupt sources we can handle */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_IER);
|
|
|
|
value |= ATI_REG_IER_IO_STATUS_EN;
|
|
#ifdef notyet
|
|
value |= ATI_REG_IER_IN_XRUN_EN;
|
|
value |= ATI_REG_IER_OUT_XRUN_EN;
|
|
|
|
value |= ATI_REG_IER_SPDIF_XRUN_EN;
|
|
value |= ATI_REG_IER_SPDF_STATUS_EN;
|
|
#endif
|
|
|
|
bus_space_write_4(iot, ioh, ATI_REG_IER, value);
|
|
}
|
|
|
|
|
|
static void
|
|
auixp_disable_interrupts(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* disable all interrupt sources */
|
|
bus_space_write_4(iot, ioh, ATI_REG_IER, 0);
|
|
|
|
/* clear all pending */
|
|
bus_space_write_4(iot, ioh, ATI_REG_ISR, 0xffffffff);
|
|
}
|
|
|
|
|
|
/* dismantle what we've set up by undoing setup */
|
|
static int
|
|
auixp_detach(device_t self, int flags)
|
|
{
|
|
struct auixp_softc *sc;
|
|
|
|
sc = device_private(self);
|
|
/* XXX shouldn't we just reset the chip? XXX */
|
|
/*
|
|
* should we explicitly disable interrupt generation and acknowledge
|
|
* what's left on? better be safe than sorry.
|
|
*/
|
|
auixp_disable_interrupts(sc);
|
|
|
|
/* tear down .... */
|
|
config_detach(&sc->sc_dev, flags); /* XXX OK? XXX */
|
|
|
|
if (sc->sc_ih != NULL)
|
|
pci_intr_disestablish(sc->sc_pct, sc->sc_ih);
|
|
if (sc->sc_ios)
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, sc->sc_ios);
|
|
|
|
pmf_device_deregister(self);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* codec handling
|
|
*
|
|
* IXP audio support can have upto 3 codecs! are they chained ? or
|
|
* alternative outlets with the same audio feed i.e. with different mixer
|
|
* settings? XXX does NetBSD support more than one audio codec? XXX
|
|
*/
|
|
|
|
|
|
static int
|
|
auixp_attach_codec(void *aux, struct ac97_codec_if *codec_if)
|
|
{
|
|
struct auixp_codec *ixp_codec;
|
|
|
|
ixp_codec = aux;
|
|
ixp_codec->codec_if = codec_if;
|
|
ixp_codec->present = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_read_codec(void *aux, uint8_t reg, uint16_t *result)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t data;
|
|
int timeout;
|
|
|
|
co = aux;
|
|
sc = co->sc;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
if (auixp_wait_for_codecs(sc, "read_codec"))
|
|
return 0xffff;
|
|
|
|
/* build up command for reading codec register */
|
|
data = (reg << ATI_REG_PHYS_OUT_ADDR_SHIFT) |
|
|
ATI_REG_PHYS_OUT_ADDR_EN |
|
|
ATI_REG_PHYS_OUT_RW |
|
|
co->codec_nr;
|
|
|
|
bus_space_write_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR, data);
|
|
|
|
if (auixp_wait_for_codecs(sc, "read_codec"))
|
|
return 0xffff;
|
|
|
|
/* wait until codec info is clocked in */
|
|
timeout = 500; /* 500*2 usec -> 0.001 sec */
|
|
do {
|
|
data = bus_space_read_4(iot, ioh, ATI_REG_PHYS_IN_ADDR);
|
|
if (data & ATI_REG_PHYS_IN_READ_FLAG) {
|
|
DPRINTF(("read ac'97 codec reg 0x%x = 0x%08x\n",
|
|
reg, data >> ATI_REG_PHYS_IN_DATA_SHIFT)
|
|
);
|
|
*result = data >> ATI_REG_PHYS_IN_DATA_SHIFT;
|
|
return 0;
|
|
}
|
|
DELAY(2);
|
|
timeout--;
|
|
} while (timeout > 0);
|
|
|
|
if (reg < 0x7c)
|
|
printf("%s: codec read timeout! (reg %x)\n",
|
|
sc->sc_dev.dv_xname, reg);
|
|
|
|
return 0xffff;
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_write_codec(void *aux, uint8_t reg, uint16_t data)
|
|
{
|
|
struct auixp_codec *co;
|
|
struct auixp_softc *sc;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
DPRINTF(("write ac'97 codec reg 0x%x = 0x%08x\n", reg, data));
|
|
co = aux;
|
|
sc = co->sc;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
if (auixp_wait_for_codecs(sc, "write_codec"))
|
|
return -1;
|
|
|
|
/* build up command for writing codec register */
|
|
value = (((uint32_t) data) << ATI_REG_PHYS_OUT_DATA_SHIFT) |
|
|
(((uint32_t) reg) << ATI_REG_PHYS_OUT_ADDR_SHIFT) |
|
|
ATI_REG_PHYS_OUT_ADDR_EN |
|
|
co->codec_nr;
|
|
|
|
bus_space_write_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_reset_codec(void *aux)
|
|
{
|
|
|
|
/* nothing to be done? */
|
|
return 0;
|
|
}
|
|
|
|
|
|
static enum ac97_host_flags
|
|
auixp_flags_codec(void *aux)
|
|
{
|
|
struct auixp_codec *ixp_codec;
|
|
|
|
ixp_codec = aux;
|
|
return ixp_codec->codec_flags;
|
|
}
|
|
|
|
|
|
static int
|
|
auixp_wait_for_codecs(struct auixp_softc *sc, const char *func)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
int timeout;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* wait until all codec transfers are done */
|
|
timeout = 500; /* 500*2 usec -> 0.001 sec */
|
|
do {
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_PHYS_OUT_ADDR);
|
|
if ((value & ATI_REG_PHYS_OUT_ADDR_EN) == 0)
|
|
return 0;
|
|
|
|
DELAY(2);
|
|
timeout--;
|
|
} while (timeout > 0);
|
|
|
|
printf("%s: %s: timed out\n", func, sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
auixp_autodetect_codecs(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
struct auixp_codec *codec;
|
|
int timeout, codec_nr;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* ATI IXP can have upto 3 codecs; mark all codecs as not existing */
|
|
sc->sc_codec_not_ready_bits = 0;
|
|
sc->sc_num_codecs = 0;
|
|
|
|
/* enable all codecs to interrupt as well as the new frame interrupt */
|
|
bus_space_write_4(iot, ioh, ATI_REG_IER, CODEC_CHECK_BITS);
|
|
|
|
/* wait for the interrupts to happen */
|
|
timeout = 100; /* 100.000 usec -> 0.1 sec */
|
|
|
|
while (timeout > 0) {
|
|
DELAY(1000);
|
|
if (sc->sc_codec_not_ready_bits)
|
|
break;
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout == 0)
|
|
printf("%s: WARNING: timeout during codec detection; "
|
|
"codecs might be present but haven't interrupted\n",
|
|
sc->sc_dev.dv_xname);
|
|
|
|
/* disable all interrupts for now */
|
|
auixp_disable_interrupts(sc);
|
|
|
|
/* Attach AC97 host interfaces */
|
|
for (codec_nr = 0; codec_nr < ATI_IXP_CODECS; codec_nr++) {
|
|
codec = &sc->sc_codec[codec_nr];
|
|
bzero(codec, sizeof(struct auixp_codec));
|
|
|
|
codec->sc = sc;
|
|
codec->codec_nr = codec_nr;
|
|
codec->present = 0;
|
|
|
|
codec->host_if.arg = codec;
|
|
codec->host_if.attach = auixp_attach_codec;
|
|
codec->host_if.read = auixp_read_codec;
|
|
codec->host_if.write = auixp_write_codec;
|
|
codec->host_if.reset = auixp_reset_codec;
|
|
codec->host_if.flags = auixp_flags_codec;
|
|
}
|
|
|
|
if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC0_NOT_READY)) {
|
|
/* codec 0 present */
|
|
DPRINTF(("auixp : YAY! codec 0 present!\n"));
|
|
if (ac97_attach(&sc->sc_codec[0].host_if, &sc->sc_dev) == 0)
|
|
sc->sc_num_codecs++;
|
|
}
|
|
|
|
if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC1_NOT_READY)) {
|
|
/* codec 1 present */
|
|
DPRINTF(("auixp : YAY! codec 1 present!\n"));
|
|
if (ac97_attach(&sc->sc_codec[1].host_if, &sc->sc_dev) == 0)
|
|
sc->sc_num_codecs++;
|
|
}
|
|
|
|
if (!(sc->sc_codec_not_ready_bits & ATI_REG_ISR_CODEC2_NOT_READY)) {
|
|
/* codec 2 present */
|
|
DPRINTF(("auixp : YAY! codec 2 present!\n"));
|
|
if (ac97_attach(&sc->sc_codec[2].host_if, &sc->sc_dev) == 0)
|
|
sc->sc_num_codecs++;
|
|
}
|
|
|
|
if (sc->sc_num_codecs == 0) {
|
|
printf("%s: no codecs detected or "
|
|
"no codecs managed to initialise\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initialisation routines */
|
|
|
|
static void
|
|
auixp_disable_dma(struct auixp_softc *sc, struct auixp_dma *dma)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* lets not stress the DMA engine more than nessisary */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
if (value & dma->dma_enable_bit) {
|
|
value &= ~dma->dma_enable_bit;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
auixp_enable_dma(struct auixp_softc *sc, struct auixp_dma *dma)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* lets not stress the DMA engine more than nessisary */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
if (!(value & dma->dma_enable_bit)) {
|
|
value |= dma->dma_enable_bit;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
auixp_reset_aclink(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value, timeout;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
|
|
/* if power is down, power it up */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
if (value & ATI_REG_CMD_POWERDOWN) {
|
|
printf("%s: powering up\n", sc->sc_dev.dv_xname);
|
|
|
|
/* explicitly enable power */
|
|
value &= ~ATI_REG_CMD_POWERDOWN;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* have to wait at least 10 usec for it to initialise */
|
|
DELAY(20);
|
|
};
|
|
|
|
printf("%s: soft resetting aclink\n", sc->sc_dev.dv_xname);
|
|
|
|
/* perform a soft reset */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value |= ATI_REG_CMD_AC_SOFT_RESET;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* need to read the CMD reg and wait aprox. 10 usec to init */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
DELAY(20);
|
|
|
|
/* clear soft reset flag again */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value &= ~ATI_REG_CMD_AC_SOFT_RESET;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* check if the ac-link is working; reset device otherwise */
|
|
timeout = 10;
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
while (!(value & ATI_REG_CMD_ACLINK_ACTIVE)) {
|
|
printf("%s: not up; resetting aclink hardware\n",
|
|
sc->sc_dev.dv_xname);
|
|
|
|
/* dip aclink reset but keep the acsync */
|
|
value &= ~ATI_REG_CMD_AC_RESET;
|
|
value |= ATI_REG_CMD_AC_SYNC;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* need to read CMD again and wait again (clocking in issue?) */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
DELAY(20);
|
|
|
|
/* assert aclink reset again */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value |= ATI_REG_CMD_AC_RESET;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* check if its active now */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
|
|
timeout--;
|
|
if (timeout == 0) break;
|
|
};
|
|
|
|
if (timeout == 0) {
|
|
printf("%s: giving up aclink reset\n", sc->sc_dev.dv_xname);
|
|
};
|
|
if (timeout != 10) {
|
|
printf("%s: aclink hardware reset successful\n",
|
|
sc->sc_dev.dv_xname);
|
|
};
|
|
|
|
/* assert reset and sync for safety */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value |= ATI_REG_CMD_AC_SYNC | ATI_REG_CMD_AC_RESET;
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
}
|
|
|
|
|
|
/* chip hard init */
|
|
static int
|
|
auixp_init(struct auixp_softc *sc)
|
|
{
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
uint32_t value;
|
|
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
/* disable all interrupts and clear all sources */
|
|
auixp_disable_interrupts(sc);
|
|
|
|
/* clear all DMA enables (preserving rest of settings) */
|
|
value = bus_space_read_4(iot, ioh, ATI_REG_CMD);
|
|
value &= ~( ATI_REG_CMD_IN_DMA_EN |
|
|
ATI_REG_CMD_OUT_DMA_EN |
|
|
ATI_REG_CMD_SPDF_OUT_EN );
|
|
bus_space_write_4(iot, ioh, ATI_REG_CMD, value);
|
|
|
|
/* Reset AC-link */
|
|
auixp_reset_aclink(sc);
|
|
|
|
/*
|
|
* codecs get auto-detected later
|
|
*
|
|
* note: we are NOT enabling interrupts yet, no codecs have been
|
|
* detected yet nor is anything else set up
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
auixp_resume(device_t dv PMF_FN_ARGS)
|
|
{
|
|
struct auixp_softc *sc = device_private(dv);
|
|
|
|
auixp_reset_codec(sc);
|
|
delay(1000);
|
|
(sc->sc_codec[0].codec_if->vtbl->restore_ports)(sc->sc_codec[0].codec_if);
|
|
|
|
return true;
|
|
}
|
|
|
|
#ifdef DEBUG_AUIXP
|
|
|
|
static void
|
|
auixp_dumpreg(void)
|
|
{
|
|
struct auixp_softc *sc;
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
int i;
|
|
|
|
sc = static_sc;
|
|
iot = sc->sc_iot;
|
|
ioh = sc->sc_ioh;
|
|
printf("%s register dump:\n", sc->sc_dev.dv_xname);
|
|
for (i = 0; i < 256; i+=4) {
|
|
printf("\t0x%02x: 0x%08x\n", i, bus_space_read_4(iot, ioh, i));
|
|
}
|
|
printf("\n");
|
|
}
|
|
#endif
|