529 lines
15 KiB
C
529 lines
15 KiB
C
/* $NetBSD: arcmsrvar.h,v 1.11 2008/03/05 15:03:36 xtraeme Exp $ */
|
|
/* Derived from $OpenBSD: arc.c,v 1.68 2007/10/27 03:28:27 dlg Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2007 Juan Romero Pardines <xtraeme@netbsd.org>
|
|
* Copyright (c) 2006 David Gwynne <dlg@openbsd.org>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _PCI_ARCMSRVAR_H_
|
|
#define _PCI_ARCMSRVAR_H_
|
|
|
|
#define ARC_PCI_BAR PCI_MAPREG_START
|
|
|
|
#define ARC_REG_INB_MSG0 0x0010
|
|
#define ARC_REG_INB_MSG0_NOP (0x00000000)
|
|
#define ARC_REG_INB_MSG0_GET_CONFIG (0x00000001)
|
|
#define ARC_REG_INB_MSG0_SET_CONFIG (0x00000002)
|
|
#define ARC_REG_INB_MSG0_ABORT_CMD (0x00000003)
|
|
#define ARC_REG_INB_MSG0_STOP_BGRB (0x00000004)
|
|
#define ARC_REG_INB_MSG0_FLUSH_CACHE (0x00000005)
|
|
#define ARC_REG_INB_MSG0_START_BGRB (0x00000006)
|
|
#define ARC_REG_INB_MSG0_CHK331PENDING (0x00000007)
|
|
#define ARC_REG_INB_MSG0_SYNC_TIMER (0x00000008)
|
|
#define ARC_REG_INB_MSG1 0x0014
|
|
#define ARC_REG_OUTB_ADDR0 0x0018
|
|
#define ARC_REG_OUTB_ADDR1 0x001c
|
|
#define ARC_REG_OUTB_ADDR1_FIRMWARE_OK (1<<31)
|
|
#define ARC_REG_INB_DOORBELL 0x0020
|
|
#define ARC_REG_INB_DOORBELL_WRITE_OK (1<<0)
|
|
#define ARC_REG_INB_DOORBELL_READ_OK (1<<1)
|
|
#define ARC_REG_OUTB_DOORBELL 0x002c
|
|
#define ARC_REG_OUTB_DOORBELL_WRITE_OK (1<<0)
|
|
#define ARC_REG_OUTB_DOORBELL_READ_OK (1<<1)
|
|
#define ARC_REG_INTRSTAT 0x0030
|
|
#define ARC_REG_INTRSTAT_MSG0 (1<<0)
|
|
#define ARC_REG_INTRSTAT_MSG1 (1<<1)
|
|
#define ARC_REG_INTRSTAT_DOORBELL (1<<2)
|
|
#define ARC_REG_INTRSTAT_POSTQUEUE (1<<3)
|
|
#define ARC_REG_INTRSTAT_PCI (1<<4)
|
|
#define ARC_REG_INTRMASK 0x0034
|
|
#define ARC_REG_INTRMASK_MSG0 (1<<0)
|
|
#define ARC_REG_INTRMASK_MSG1 (1<<1)
|
|
#define ARC_REG_INTRMASK_DOORBELL (1<<2)
|
|
#define ARC_REG_INTRMASK_POSTQUEUE (1<<3)
|
|
#define ARC_REG_INTRMASK_PCI (1<<4)
|
|
#define ARC_REG_POST_QUEUE 0x0040
|
|
#define ARC_REG_POST_QUEUE_ADDR_SHIFT 5
|
|
#define ARC_REG_POST_QUEUE_IAMBIOS (1<<30)
|
|
#define ARC_REG_POST_QUEUE_BIGFRAME (1<<31)
|
|
#define ARC_REG_REPLY_QUEUE 0x0044
|
|
#define ARC_REG_REPLY_QUEUE_ADDR_SHIFT 5
|
|
#define ARC_REG_REPLY_QUEUE_ERR (1<<28)
|
|
#define ARC_REG_REPLY_QUEUE_IAMBIOS (1<<30)
|
|
#define ARC_REG_MSGBUF 0x0a00
|
|
#define ARC_REG_MSGBUF_LEN 1024
|
|
#define ARC_REG_IOC_WBUF_LEN 0x0e00
|
|
#define ARC_REG_IOC_WBUF 0x0e04
|
|
#define ARC_REG_IOC_RBUF_LEN 0x0f00
|
|
#define ARC_REG_IOC_RBUF 0x0f04
|
|
#define ARC_REG_IOC_RWBUF_MAXLEN 124 /* for both RBUF and WBUF */
|
|
|
|
struct arc_msg_firmware_info {
|
|
uint32_t signature;
|
|
#define ARC_FWINFO_SIGNATURE_GET_CONFIG (0x87974060)
|
|
uint32_t request_len;
|
|
uint32_t queue_len;
|
|
uint32_t sdram_size;
|
|
uint32_t sata_ports;
|
|
uint8_t vendor[40];
|
|
uint8_t model[8];
|
|
uint8_t fw_version[16];
|
|
uint8_t device_map[16];
|
|
} __packed;
|
|
|
|
struct arc_msg_scsicmd {
|
|
uint8_t bus;
|
|
uint8_t target;
|
|
uint8_t lun;
|
|
uint8_t function;
|
|
|
|
uint8_t cdb_len;
|
|
uint8_t sgl_len;
|
|
uint8_t flags;
|
|
#define ARC_MSG_SCSICMD_FLAG_SGL_BSIZE_512 (1<<0)
|
|
#define ARC_MSG_SCSICMD_FLAG_FROM_BIOS (1<<1)
|
|
#define ARC_MSG_SCSICMD_FLAG_WRITE (1<<2)
|
|
#define ARC_MSG_SCSICMD_FLAG_SIMPLEQ (0x00)
|
|
#define ARC_MSG_SCSICMD_FLAG_HEADQ (0x08)
|
|
#define ARC_MSG_SCSICMD_FLAG_ORDERQ (0x10)
|
|
uint8_t reserved;
|
|
|
|
uint32_t context;
|
|
uint32_t data_len;
|
|
|
|
#define ARC_MSG_CDBLEN 16
|
|
uint8_t cdb[ARC_MSG_CDBLEN];
|
|
|
|
uint8_t status;
|
|
#define ARC_MSG_STATUS_SELTIMEOUT 0xf0
|
|
#define ARC_MSG_STATUS_ABORTED 0xf1
|
|
#define ARC_MSG_STATUS_INIT_FAIL 0xf2
|
|
#define ARC_MSG_SENSELEN 15
|
|
uint8_t sense_data[ARC_MSG_SENSELEN];
|
|
|
|
/* followed by an sgl */
|
|
} __packed;
|
|
|
|
struct arc_sge {
|
|
uint32_t sg_hdr;
|
|
#define ARC_SGE_64BIT (1<<24)
|
|
uint32_t sg_lo_addr;
|
|
uint32_t sg_hi_addr;
|
|
} __packed;
|
|
|
|
#define ARC_MAX_TARGET 16
|
|
#define ARC_MAX_LUN 8
|
|
#define ARC_MAX_IOCMDLEN 512
|
|
#define ARC_BLOCKSIZE 512
|
|
|
|
/*
|
|
* the firmware deals with up to 256 or 512 byte command frames.
|
|
*/
|
|
|
|
/*
|
|
* sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 38) == 508.
|
|
*/
|
|
#define ARC_SGL_MAXLEN 38
|
|
/*
|
|
* sizeof(struct arc_msg_scsicmd) + (sizeof(struct arc_sge) * 17) == 252.
|
|
*/
|
|
#define ARC_SGL_256LEN 17
|
|
|
|
struct arc_io_cmd {
|
|
struct arc_msg_scsicmd cmd;
|
|
struct arc_sge sgl[ARC_SGL_MAXLEN];
|
|
} __packed;
|
|
|
|
/*
|
|
* definitions of the firmware commands sent via the doorbells.
|
|
*/
|
|
struct arc_fw_hdr {
|
|
uint8_t byte1;
|
|
uint8_t byte2;
|
|
uint8_t byte3;
|
|
} __packed;
|
|
|
|
struct arc_fw_bufhdr {
|
|
struct arc_fw_hdr hdr;
|
|
uint16_t len;
|
|
} __packed;
|
|
|
|
/* Firmware command codes */
|
|
#define ARC_FW_CHECK_PASS 0x14 /* opcode + 1 byte length + password */
|
|
#define ARC_FW_GETEVENTS 0x1a /* opcode + 1 byte for page 0/1/2/3 */
|
|
#define ARC_FW_GETHWMON 0x1b /* opcode + arc_fw_hwmon */
|
|
#define ARC_FW_RAIDINFO 0x20 /* opcode + raid# */
|
|
#define ARC_FW_VOLINFO 0x21 /* opcode + vol# */
|
|
#define ARC_FW_DISKINFO 0x22 /* opcode + physdisk# */
|
|
#define ARC_FW_SYSINFO 0x23 /* opcode. reply is fw_sysinfo */
|
|
#define ARC_FW_CLEAREVENTS 0x24 /* opcode only */
|
|
#define ARC_FW_MUTE_ALARM 0x30 /* opcode only */
|
|
#define ARC_FW_SET_ALARM 0x31 /* opcode + 1 byte for setting */
|
|
#define ARC_FW_SET_ALARM_DISABLE 0x00
|
|
#define ARC_FW_SET_ALARM_ENABLE 0x01
|
|
#define ARC_FW_SET_PASS 0x32 /* opcode + 1 byte length + password */
|
|
#define ARC_FW_REBUILD_PRIO 0x34 /* Rebuild priority for disks */
|
|
#define ARC_FW_REBUILD_PRIO_ULTRALOW (1<<0)
|
|
#define ARC_FW_REBUILD_PRIO_LOW (1<<1)
|
|
#define ARC_FW_REBUILD_PRIO_NORMAL (1<<2)
|
|
#define ARC_FW_REBUILD_PRIO_HIGH (1<<3)
|
|
#define ARC_FW_SET_MAXATA_MODE 0x35 /* opcode + 1 byte mode */
|
|
#define ARC_FW_SET_MAXATA_MODE_133 (1<<0)
|
|
#define ARC_FW_SET_MAXATA_MODE_100 (1<<1)
|
|
#define ARC_FW_SET_MAXATA_MODE_66 (1<<2)
|
|
#define ARC_FW_SET_MAXATA_MODE_33 (1<<3)
|
|
#define ARC_FW_NOP 0x38 /* opcode only */
|
|
/*
|
|
* Structure for ARC_FW_CREATE_PASSTHRU:
|
|
*
|
|
* byte 2 command code 0x40
|
|
* byte 3 device #
|
|
* byte 4 scsi channel (0/1)
|
|
* byte 5 scsi id (0/15)
|
|
* byte 6 scsi lun (0/7)
|
|
* byte 7 tagged queue (1 enabled)
|
|
* byte 8 cache mode (1 enabled)
|
|
* byte 9 max speed ((0/1/2/3/4 -> 33/66/100/133/150)
|
|
*/
|
|
#define ARC_FW_CREATE_PASSTHRU 0x40
|
|
#define ARC_FW_DELETE_PASSTHRU 0x42 /* opcode + device# */
|
|
|
|
/*
|
|
* Structure for ARC_FW_CREATE_RAIDSET:
|
|
*
|
|
* byte 2 command code 0x50
|
|
* byte 3-6 device mask
|
|
* byte 7-22 raidset name (byte 7 == 0 use default)
|
|
*/
|
|
#define ARC_FW_CREATE_RAIDSET 0x50
|
|
#define ARC_FW_DELETE_RAIDSET 0x51 /* opcode + raidset# */
|
|
#define ARC_FW_CREATE_HOTSPARE 0x54 /* opcode + 4 bytes device mask */
|
|
#define ARC_FW_DELETE_HOTSPARE 0x55 /* opcode + 4 bytes device mask */
|
|
|
|
/*
|
|
* Structure for ARC_FW_CREATE_VOLUME/ARC_FW_MODIFY_VOLUME:
|
|
*
|
|
* byte 2 command code 0x60
|
|
* byte 3 raidset#
|
|
* byte 4-19 volume set name (byte 4 == 0 use default)
|
|
* byte 20-27 volume capacity in blocks
|
|
* byte 28 raid level
|
|
* byte 29 stripe size
|
|
* byte 30 channel
|
|
* byte 31 ID
|
|
* byte 32 LUN
|
|
* byte 33 1 enable tag queuing
|
|
* byte 33 1 enable cache
|
|
* byte 35 speed 0/1/2/3/4 -> 33/66/100/133/150
|
|
* byte 36 1 for quick init (only for CREATE_VOLUME)
|
|
*/
|
|
#define ARC_FW_CREATE_VOLUME 0x60
|
|
#define ARC_FW_MODIFY_VOLUME 0x61
|
|
#define ARC_FW_DELETE_VOLUME 0x62 /* opcode + vol# */
|
|
#define ARC_FW_START_CHECKVOL 0x63 /* opcode + vol# */
|
|
#define ARC_FW_STOP_CHECKVOL 0x64 /* opcode only */
|
|
|
|
/* Status codes for the firmware command codes */
|
|
#define ARC_FW_CMD_OK 0x41
|
|
#define ARC_FW_CMD_RAIDINVAL 0x42
|
|
#define ARC_FW_CMD_VOLINVAL 0x43
|
|
#define ARC_FW_CMD_NORAID 0x44
|
|
#define ARC_FW_CMD_NOVOLUME 0x45
|
|
#define ARC_FW_CMD_NOPHYSDRV 0x46
|
|
#define ARC_FW_CMD_PARAM_ERR 0x47
|
|
#define ARC_FW_CMD_UNSUPPORTED 0x48
|
|
#define ARC_FW_CMD_DISKCFG_CHGD 0x49
|
|
#define ARC_FW_CMD_PASS_INVAL 0x4a
|
|
#define ARC_FW_CMD_NODISKSPACE 0x4b
|
|
#define ARC_FW_CMD_CHECKSUM_ERR 0x4c
|
|
#define ARC_FW_CMD_PASS_REQD 0x4d
|
|
|
|
struct arc_fw_hwmon {
|
|
uint8_t nfans;
|
|
uint8_t nvoltages;
|
|
uint8_t ntemps;
|
|
uint8_t npower;
|
|
uint16_t fan0; /* RPM */
|
|
uint16_t fan1; /* RPM */
|
|
uint16_t voltage_orig0; /* original value * 1000 */
|
|
uint16_t voltage_val0; /* value */
|
|
uint16_t voltage_orig1; /* original value * 1000 */
|
|
uint16_t voltage_val1; /* value */
|
|
uint16_t voltage_orig2;
|
|
uint16_t voltage_val2;
|
|
uint8_t temp0;
|
|
uint8_t temp1;
|
|
uint8_t pwr_indicator; /* (bit0 : power#0, bit1 : power#1) */
|
|
uint8_t ups_indicator;
|
|
} __packed;
|
|
|
|
struct arc_fw_comminfo {
|
|
uint8_t baud_rate;
|
|
uint8_t data_bits;
|
|
uint8_t stop_bits;
|
|
uint8_t parity;
|
|
uint8_t flow_control;
|
|
} __packed;
|
|
|
|
struct arc_fw_scsiattr {
|
|
uint8_t channel; /* channel for SCSI target (0/1) */
|
|
uint8_t target;
|
|
uint8_t lun;
|
|
uint8_t tagged;
|
|
uint8_t cache;
|
|
uint8_t speed;
|
|
} __packed;
|
|
|
|
struct arc_fw_raidinfo {
|
|
uint8_t set_name[16];
|
|
uint32_t capacity;
|
|
uint32_t capacity2;
|
|
uint32_t fail_mask;
|
|
uint8_t device_array[32];
|
|
uint8_t member_devices;
|
|
uint8_t new_member_devices;
|
|
uint8_t raid_state;
|
|
uint8_t volumes;
|
|
uint8_t volume_list[16];
|
|
uint8_t reserved1[3];
|
|
uint8_t free_segments;
|
|
uint32_t raw_stripes[8];
|
|
uint8_t reserved2[12];
|
|
} __packed;
|
|
|
|
struct arc_fw_volinfo {
|
|
uint8_t set_name[16];
|
|
uint32_t capacity;
|
|
uint32_t capacity2;
|
|
uint32_t fail_mask;
|
|
uint32_t stripe_size; /* in blocks */
|
|
uint32_t new_fail_mask;
|
|
uint32_t new_stripe_size;
|
|
uint32_t volume_status;
|
|
#define ARC_FW_VOL_STATUS_NORMAL 0x00
|
|
#define ARC_FW_VOL_STATUS_INITTING (1<<0)
|
|
#define ARC_FW_VOL_STATUS_FAILED (1<<1)
|
|
#define ARC_FW_VOL_STATUS_MIGRATING (1<<2)
|
|
#define ARC_FW_VOL_STATUS_REBUILDING (1<<3)
|
|
#define ARC_FW_VOL_STATUS_NEED_INIT (1<<4)
|
|
#define ARC_FW_VOL_STATUS_NEED_MIGRATE (1<<5)
|
|
#define ARC_FW_VOL_STATUS_INIT_FLAG (1<<6)
|
|
#define ARC_FW_VOL_STATUS_NEED_REGEN (1<<7)
|
|
#define ARC_FW_VOL_STATUS_CHECKING (1<<8)
|
|
#define ARC_FW_VOL_STATUS_NEED_CHECK (1<<9)
|
|
uint32_t progress;
|
|
struct arc_fw_scsiattr scsi_attr;
|
|
uint8_t member_disks;
|
|
uint8_t raid_level;
|
|
#define ARC_FW_VOL_RAIDLEVEL_0 0x00
|
|
#define ARC_FW_VOL_RAIDLEVEL_1 0x01
|
|
#define ARC_FW_VOL_RAIDLEVEL_3 0x02
|
|
#define ARC_FW_VOL_RAIDLEVEL_5 0x03
|
|
#define ARC_FW_VOL_RAIDLEVEL_6 0x04
|
|
#define ARC_FW_VOL_RAIDLEVEL_PASSTHRU 0x05
|
|
uint8_t new_member_disks;
|
|
uint8_t new_raid_level;
|
|
uint8_t raid_set_number;
|
|
uint8_t reserved[5];
|
|
} __packed;
|
|
|
|
struct arc_fw_diskinfo {
|
|
uint8_t model[40];
|
|
uint8_t serial[20];
|
|
uint8_t firmware_rev[8];
|
|
uint32_t capacity;
|
|
uint32_t capacity2;
|
|
uint8_t device_state;
|
|
#define ARC_FW_DISK_RAIDMEMBER 0x89 /* disk is member of a raid set */
|
|
#define ARC_FW_DISK_PASSTHRU 0x8b /* pass through disk */
|
|
#define ARC_FW_DISK_HOTSPARE 0xa9 /* hotspare disk */
|
|
#define ARC_FW_DISK_UNUSED 0xc9 /* free/unused disk */
|
|
uint8_t pio_mode;
|
|
uint8_t current_udma_mode;
|
|
uint8_t udma_mode;
|
|
uint8_t drive_select;
|
|
uint8_t raid_number; /* 0xff unowned */
|
|
struct arc_fw_scsiattr scsi_attr;
|
|
uint8_t reserved[40];
|
|
} __packed;
|
|
|
|
struct arc_fw_sysinfo {
|
|
uint8_t vendor_name[40];
|
|
uint8_t serial_number[16];
|
|
uint8_t firmware_version[16];
|
|
uint8_t boot_version[16];
|
|
uint8_t mb_version[16];
|
|
uint8_t model_name[8];
|
|
|
|
uint8_t local_ip[4];
|
|
uint8_t current_ip[4];
|
|
|
|
uint32_t time_tick;
|
|
uint32_t cpu_speed;
|
|
uint32_t icache;
|
|
uint32_t dcache;
|
|
uint32_t scache;
|
|
uint32_t memory_size;
|
|
uint32_t memory_speed;
|
|
uint32_t events;
|
|
|
|
uint8_t gsiMacAddress[6];
|
|
uint8_t gsiDhcp;
|
|
|
|
uint8_t alarm;
|
|
uint8_t channel_usage;
|
|
uint8_t max_ata_mode;
|
|
uint8_t sdram_ecc;
|
|
uint8_t rebuild_priority;
|
|
struct arc_fw_comminfo comm_a;
|
|
struct arc_fw_comminfo comm_b;
|
|
uint8_t ide_channels;
|
|
uint8_t scsi_host_channels;
|
|
uint8_t ide_host_channels;
|
|
uint8_t max_volume_set;
|
|
uint8_t max_raid_set;
|
|
uint8_t ether_port;
|
|
uint8_t raid6_engine;
|
|
uint8_t reserved[75];
|
|
} __packed;
|
|
|
|
/*
|
|
* autconf(9) glue.
|
|
*/
|
|
struct arc_ccb;
|
|
TAILQ_HEAD(arc_ccb_list, arc_ccb);
|
|
|
|
struct arc_softc {
|
|
struct scsipi_channel sc_chan;
|
|
struct scsipi_adapter sc_adapter;
|
|
|
|
pci_chipset_tag_t sc_pc;
|
|
pcitag_t sc_tag;
|
|
|
|
bus_space_tag_t sc_iot;
|
|
bus_space_handle_t sc_ioh;
|
|
bus_size_t sc_ios;
|
|
bus_dma_tag_t sc_dmat;
|
|
|
|
void *sc_ih;
|
|
|
|
int sc_req_count;
|
|
|
|
struct arc_dmamem *sc_requests;
|
|
struct arc_ccb *sc_ccbs;
|
|
struct arc_ccb_list sc_ccb_free;
|
|
|
|
struct lwp *sc_lwp;
|
|
volatile int sc_talking;
|
|
kmutex_t sc_mutex;
|
|
kcondvar_t sc_condvar;
|
|
krwlock_t sc_rwlock;
|
|
|
|
struct sysmon_envsys *sc_sme;
|
|
envsys_data_t *sc_sensors;
|
|
int sc_nsensors;
|
|
|
|
size_t sc_maxraidset; /* max raid sets */
|
|
size_t sc_maxvolset; /* max volume sets */
|
|
size_t sc_cchans; /* connected channels */
|
|
|
|
device_t sc_dev; /* self */
|
|
device_t sc_scsibus_dv;
|
|
};
|
|
|
|
/*
|
|
* interface for scsi midlayer to talk to.
|
|
*/
|
|
void arc_scsi_cmd(struct scsipi_channel *, scsipi_adapter_req_t, void *);
|
|
|
|
/*
|
|
* code to deal with getting bits in and out of the bus space.
|
|
*/
|
|
uint32_t arc_read(struct arc_softc *, bus_size_t);
|
|
void arc_read_region(struct arc_softc *, bus_size_t, void *,
|
|
size_t);
|
|
void arc_write(struct arc_softc *, bus_size_t, uint32_t);
|
|
void arc_write_region(struct arc_softc *, bus_size_t, void *,
|
|
size_t);
|
|
int arc_wait_eq(struct arc_softc *, bus_size_t, uint32_t,
|
|
uint32_t);
|
|
int arc_wait_ne(struct arc_softc *, bus_size_t, uint32_t,
|
|
uint32_t);
|
|
int arc_msg0(struct arc_softc *, uint32_t);
|
|
|
|
#define arc_push(_s, _r) arc_write((_s), ARC_REG_POST_QUEUE, (_r))
|
|
#define arc_pop(_s) arc_read((_s), ARC_REG_REPLY_QUEUE)
|
|
|
|
/*
|
|
* wrap up the bus_dma api.
|
|
*/
|
|
struct arc_dmamem {
|
|
bus_dmamap_t adm_map;
|
|
bus_dma_segment_t adm_seg;
|
|
size_t adm_size;
|
|
void *adm_kva;
|
|
};
|
|
#define ARC_DMA_MAP(_adm) ((_adm)->adm_map)
|
|
#define ARC_DMA_DVA(_adm) ((_adm)->adm_map->dm_segs[0].ds_addr)
|
|
#define ARC_DMA_KVA(_adm) ((void *)(_adm)->adm_kva)
|
|
|
|
struct arc_dmamem *arc_dmamem_alloc(struct arc_softc *, size_t);
|
|
void arc_dmamem_free(struct arc_softc *,
|
|
struct arc_dmamem *);
|
|
|
|
/*
|
|
* stuff to manage a scsi command.
|
|
*/
|
|
struct arc_ccb {
|
|
struct arc_softc *ccb_sc;
|
|
int ccb_id;
|
|
|
|
struct scsipi_xfer *ccb_xs;
|
|
|
|
bus_dmamap_t ccb_dmamap;
|
|
bus_addr_t ccb_offset;
|
|
struct arc_io_cmd *ccb_cmd;
|
|
uint32_t ccb_cmd_post;
|
|
|
|
TAILQ_ENTRY(arc_ccb) ccb_link;
|
|
};
|
|
|
|
int arc_alloc_ccbs(device_t);
|
|
struct arc_ccb *arc_get_ccb(struct arc_softc *);
|
|
void arc_put_ccb(struct arc_softc *, struct arc_ccb *);
|
|
int arc_load_xs(struct arc_ccb *);
|
|
int arc_complete(struct arc_softc *, struct arc_ccb *, int);
|
|
void arc_scsi_cmd_done(struct arc_softc *, struct arc_ccb *,
|
|
uint32_t);
|
|
|
|
/*
|
|
* real stuff for dealing with the hardware.
|
|
*/
|
|
int arc_map_pci_resources(device_t, struct pci_attach_args *);
|
|
void arc_unmap_pci_resources(struct arc_softc *);
|
|
int arc_query_firmware(device_t);
|
|
|
|
/*
|
|
* stuff to do messaging via the doorbells.
|
|
*/
|
|
void arc_lock(struct arc_softc *);
|
|
void arc_unlock(struct arc_softc *);
|
|
void arc_wait(struct arc_softc *);
|
|
uint8_t arc_msg_cksum(void *, uint16_t);
|
|
int arc_msgbuf(struct arc_softc *, void *, size_t, void *, size_t);
|
|
|
|
#endif /* ! _PCI_ARCMSRVAR_H_ */
|