NetBSD/sys/dev/ic/elinkxlvar.h

165 lines
5.6 KiB
C

/* $NetBSD: elinkxlvar.h,v 1.17 2005/12/11 12:21:26 christos Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Frank van der Linden.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "rnd.h"
#if NRND > 0
#include <sys/rnd.h>
#endif
/*
* Ethernet software status per interface.
*/
struct ex_softc {
struct device sc_dev;
void *sc_ih;
struct ethercom sc_ethercom; /* Ethernet common part */
bus_space_tag_t sc_iot; /* bus cookie */
bus_space_handle_t sc_ioh; /* bus i/o handle */
bus_dma_tag_t sc_dmat; /* bus dma tag */
bus_dmamap_t sc_dpd_dmamap;
bus_dmamap_t sc_upd_dmamap;
#define sc_upddma sc_upd_dmamap->dm_segs[0].ds_addr
#define sc_dpddma sc_dpd_dmamap->dm_segs[0].ds_addr
struct ex_upd *sc_upd;
struct ex_dpd *sc_dpd;
bus_dmamap_t sc_tx_dmamaps[EX_NDPD]; /* DMA maps for DPDs */
bus_dmamap_t sc_rx_dmamaps[EX_NUPD]; /* DMA maps for UPDs */
struct ex_rxdesc sc_rxdescs[EX_NUPD];
struct ex_txdesc sc_txdescs[EX_NDPD];
struct ex_rxdesc *rx_head;
struct ex_rxdesc *rx_tail;
struct ex_txdesc *tx_head;
struct ex_txdesc *tx_tail;
struct ex_txdesc *tx_free;
struct ex_txdesc *tx_ftail;
int tx_start_thresh; /* Current TX_start_thresh. */
int tx_succ_ok; /* # packets sent in sequence */
u_int ex_connectors; /* Connectors on this card. */
mii_data_t ex_mii; /* mii bus data */
struct callout ex_mii_callout; /* mii callout */
u_int ex_conf; /* config flags */
#define EX_CONF_MII 0x0001 /* has MII bus */
#define EX_CONF_INTPHY 0x0002 /* has internal PHY */
#define EX_CONF_90XB 0x0004 /* is 90xB */
#define EX_CONF_INV_LED_POLARITY 0x0010 /* CardBus & MiniPCI: LED polarity */
#define EX_CONF_PHY_POWER 0x0020 /* CardBus & MiniPCI: PHY power */
#define EX_CONF_EEPROM_OFF 0x0040 /* EEPROM is offset by 0x30 */
#define EX_CONF_EEPROM_8BIT 0x0080 /* 8 bit EEPROM */
#define EX_CONF_PCI_FUNCREG 0x0100 /* Has PCI function registers */
#define EX_CONF_RESETHACK 0x0200 /* Hack to make reset work on 556B */
#define EX_CONF_NO_XCVR_PWR 0x0400 /* Hack to enable later 556B xcvr */
#define EX_XCVR_PWR_MAGICBITS 0x0900 /* NO_XCVR_PWR magic value */
/*
* XXX code duplication from elink3var.h
*/
u_int ex_flags; /* capabilities flag (from EEPROM) */
#define EX_FLAGS_PNP 0x0001
#define EX_FLAGS_FULLDUPLEX 0x0002
#define EX_FLAGS_LARGEPKT 0x0004 /* 4k packet support */
#define EX_FLAGS_SLAVEDMA 0x0008
#define EX_FLAGS_SECONDDMA 0x0010
#define EX_FLAGS_FULLDMA 0x0020
#define EX_FLAGS_FRAGMENTDMA 0x0040
#define EX_FLAGS_CRC_PASSTHRU 0x0080
#define EX_FLAGS_TXDONE 0x0100
#define EX_FLAGS_NO_TXLENGTH 0x0200
#define EX_FLAGS_RXREPEAT 0x0400
#define EX_FLAGS_SNOOPING 0x0800
#define EX_FLAGS_100MBIT 0x1000
#define EX_FLAGS_POWERMGMT 0x2000
#define EX_FLAGS_ATTACHED 0x4000 /* attach has succeeded */
u_char ex_bustype; /* parent bus type (currently unused) */
#define EX_BUS_PCI 0
#define EX_BUS_CARDBUS 1
#if NRND > 0
rndsource_element_t rnd_source;
#endif
/* power management hooks */
int (*enable)(struct ex_softc *);
void (*disable)(struct ex_softc *);
void (*power)(struct ex_softc *, int);
int enabled;
/* interrupt acknowledge hook */
void (*intr_ack)(struct ex_softc *);
void *sc_sdhook;
void *sc_powerhook;
bus_dma_segment_t sc_useg, sc_dseg;
int sc_urseg, sc_drseg;
short sc_if_flags;
};
#define ex_waitcmd(sc) \
do { \
int stat; \
do { \
stat = bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, \
ELINK_STATUS); \
} while ((stat & COMMAND_IN_PROGRESS) && (stat != 0xffff)); \
} while (0)\
u_int16_t exreadeeprom(bus_space_tag_t, bus_space_handle_t, int);
void ex_config(struct ex_softc *);
int ex_intr(void *);
void ex_stop(struct ifnet *, int);
void ex_watchdog(struct ifnet *);
int ex_ioctl(struct ifnet *ifp, u_long, caddr_t);
int ex_activate(struct device *, enum devact);
int ex_detach(struct ex_softc *);
int ex_enable(struct ex_softc *);
void ex_disable(struct ex_softc *);