Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/am9513reg.h

282 lines
9.5 KiB
C
Raw Blame History

/* $NetBSD: am9513reg.h,v 1.3 2005/12/11 12:21:25 christos Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Matthew Fredette.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _AM9513REG_H
#define _AM9513REG_H
/*
* Driver support for the Am9513 timer chip. See
* http://www.amd.com/products/cpg/techdocs/misc/03402/03402.html
* for data sheets.
*/
struct am9513 {
u_int16_t am9513_clk_data; /* data register */
u_int16_t am9513_clk_cmd; /* command register */
};
#define AM9513_CLK_DATA 0
#define AM9513_CLK_CMD 2
/*
* All of the below macros are for use in bitfields in the Counter
* Mode (CM) Register.
*/
/* Gating control, CM[13:15]: */
/*
* Legend: A[HL][LE]?
* | | `-> L = level, E = edge
* | `-> H = high, L = low
* `-> active
*
* P1 = plus one, M1 = minus one
*/
#define AM9513_CM_GATING_NONE (0x0 << 13)
#define AM9513_CM_GATING_AH_TCN_M1 (0x1 << 13)
#define AM9513_CM_GATING_AHL_GATEN_P1 (0x2 << 13)
#define AM9513_CM_GATING_AHL_GATEN_M1 (0x3 << 13)
#define AM9513_CM_GATING_AHL_GATEN (0x4 << 13)
#define AM9513_CM_GATING_ALL_GATEN (0x5 << 13)
#define AM9513_CM_GATING_AHE_GATEN (0x6 << 13)
#define AM9513_CM_GATING_ALE_GATEN (0x7 << 13)
/* Source edge, CM[12]: */
#define AM9513_CM_SOURCE_EDGE_RISING (0 << 12)
#define AM9513_CM_SOURCE_EDGE_FALLING (1 << 12)
/* Count sources, CM[8:11]: */
#define AM9513_CM_SOURCE_TCN1 (0x0 << 8)
#define AM9513_CM_SOURCE_SRC1 (0x1 << 8)
#define AM9513_CM_SOURCE_SRC2 (0x2 << 8)
#define AM9513_CM_SOURCE_SRC3 (0x3 << 8)
#define AM9513_CM_SOURCE_SRC4 (0x4 << 8)
#define AM9513_CM_SOURCE_SRC5 (0x5 << 8)
#define AM9513_CM_SOURCE_GATE1 (0x6 << 8)
#define AM9513_CM_SOURCE_GATE2 (0x7 << 8)
#define AM9513_CM_SOURCE_GATE3 (0x8 << 8)
#define AM9513_CM_SOURCE_GATE4 (0x9 << 8)
#define AM9513_CM_SOURCE_GATE5 (0xA << 8)
#define AM9513_CM_SOURCE_F1 (0xB << 8)
#define AM9513_CM_SOURCE_F2 (0xC << 8)
#define AM9513_CM_SOURCE_F3 (0xD << 8)
#define AM9513_CM_SOURCE_F4 (0xE << 8)
#define AM9513_CM_SOURCE_F5 (0xF << 8)
/* Count control, CM[7]: */
#define AM9513_CM_SPECIAL_GATE_ENA (1 << 7)
#define AM9513_CM_SPECIAL_GATE_DIS (0 << 7)
/* Counter reload source, CM[6]: */
#define AM9513_CM_RELOAD_SOURCE_LOAD (0 << 6)
#define AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD (1 << 6)
/* Counter repeat control, CM[5]: */
#define AM9513_CM_REPEAT_DIS (0 << 5)
#define AM9513_CM_REPEAT_ENA (1 << 5)
/* Counter type, CM[4]: */
#define AM9513_CM_TYPE_BIN (0 << 4)
#define AM9513_CM_TYPE_BCD (1 << 4)
/* Counter direction, CM[3]: */
#define AM9513_CM_DIR_DOWN (0 << 3)
#define AM9513_CM_DIR_UP (1 << 3)
/* Output control, CM[0:2]: */
#define AM9513_CM_OUTPUT_OL (0x0 << 0) /* inactive, output low */
#define AM9513_CM_OUTPUT_AHTCP (0x1 << 0) /* active high terminal count pulse */
#define AM9513_CM_OUTPUT_TC_TOGGLED (0x2 << 0) /* TC toggled */
#define AM9513_CM_OUTPUT_OHI (0x4 << 0) /* inactive, output high impedance */
#define AM9513_CM_OUTPUT_ALTCP (0x5 << 0) /* active low terminal count pulse */
/* The modes are various combinations of the above: */
/* Mode A: */
#define AM9513_CM_MODE_A (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_DIS \
| AM9513_CM_RELOAD_SOURCE_LOAD \
| AM9513_CM_REPEAT_DIS)
/*
* Mode B is just like mode A, except you OR in the
* AM9513_CM_GATING_ value for the *level* you want:
*/
#define AM9513_CM_MODE_B AM9513_CM_MODE_A
/*
* Mode C is just like mode A, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_C AM9513_CM_MODE_A
/* Mode D: */
#define AM9513_CM_MODE_D (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_DIS \
| AM9513_CM_RELOAD_SOURCE_LOAD \
| AM9513_CM_REPEAT_ENA)
/*
* Mode E is just like mode D, except you OR in the
* AM9513_CM_GATING_ value for the *level* you want:
*/
#define AM9513_CM_MODE_E AM9513_CM_MODE_D
/*
* Mode F is just like mode D, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_F AM9513_CM_MODE_D
/* Mode G: */
#define AM9513_CM_MODE_G (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_DIS \
| AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \
| AM9513_CM_REPEAT_DIS)
/*
* Mode H is just like mode G, except you OR in the
* AM9513_CM_GATING_ value for the *level* you want:
*/
#define AM9513_CM_MODE_H AM9513_CM_MODE_G
/*
* Mode I is just like mode G, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_I AM9513_CM_MODE_G
/* Mode J: */
#define AM9513_CM_MODE_J (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_DIS \
| AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \
| AM9513_CM_REPEAT_ENA)
/*
* Mode K is just like mode J, except you OR in the
* AM9513_CM_GATING_ value for the *level* you want:
*/
#define AM9513_CM_MODE_K AM9513_CM_MODE_J
/*
* Mode L is just like mode J, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_L AM9513_CM_MODE_J
/* Mode N: */
#define AM9513_CM_MODE_N (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_ENA \
| AM9513_CM_RELOAD_SOURCE_LOAD \
| AM9513_CM_REPEAT_DIS)
/*
* Mode O is just like mode N, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_O AM9513_CM_MODE_N
/* Mode Q; OR in the AM9513_CM_GATING_ value for the *level* you want: */
#define AM9513_CM_MODE_Q (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_ENA \
| AM9513_CM_RELOAD_SOURCE_LOAD \
| AM9513_CM_REPEAT_ENA)
/*
* Mode R is just like mode N, except you OR in the
* AM9513_CM_GATING_ value for the *edge* you want:
*/
#define AM9513_CM_MODE_R AM9513_CM_MODE_Q
/* Mode S: */
#define AM9513_CM_MODE_S (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_ENA \
| AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \
| AM9513_CM_REPEAT_DIS)
/* Mode V: */
#define AM9513_CM_MODE_V (AM9513_CM_GATING_NONE \
| AM9513_CM_SPECIAL_GATE_ENA \
| AM9513_CM_RELOAD_SOURCE_LOAD_OR_HOLD \
| AM9513_CM_REPEAT_ENA)
/* Given an AM9513_CM_SOURCE_F? value, return the divisor: */
#define AM9513_CM_SOURCE_Fn_DIV(func) (1 << (((func) - AM9513_CM_SOURCE_F1) >> 6))
/*
* Given a basic frequency and an AM9513_CM_SOURCE_F? value, returns
* the number of clock ticks for a certain frequency:
*/
#define AM9513_TICKS(basic, func, hz) (((basic) / AM9513_CM_SOURCE_Fn_DIV(func)) / (hz))
/* These are the timer numbers: */
#define AM9513_TIMER1 (1)
#define AM9513_TIMER2 (2)
#define AM9513_TIMER3 (3)
#define AM9513_TIMER4 (4)
#define AM9513_TIMER5 (5)
/*
* This macro is used to compose a bitmask of times for those
* commands that take a bitmask:
*/
#define AM9513_TIMER_BIT(timer) (1 << ((timer) - 1))
/* When in 16-bit mode, the high 8 bits of every command must be ones: */
#define _AM9513_CMD(x) (0xFF00 | (x))
/* Commands: */
#define AM9513_CMD_LOAD_MODE(timer) _AM9513_CMD(0x00 | (timer))
#define AM9513_CMD_LOAD_LOAD(timer) _AM9513_CMD(0x08 | (timer))
#define AM9513_CMD_LOAD_HOLD(timer) _AM9513_CMD(0x10 | (timer))
#define AM9513_CMD_ARM(timers) _AM9513_CMD(0x20 | (timers))
#define AM9513_CMD_LOAD(timers) _AM9513_CMD(0x40 | (timers))
#define AM9513_CMD_LOAD_ARM(timers) _AM9513_CMD(0x60 | (timers))
#define AM9513_CMD_SAVE(timers) _AM9513_CMD(0xA0 | (timers))
#define AM9513_CMD_DISARM(timers) _AM9513_CMD(0xC0 | (timers))
#define AM9513_CMD_CLEAR_OUTPUT(timer) _AM9513_CMD(0xE0 | (timer))
#define AM9513_CMD_RESET _AM9513_CMD(0xFF)
/* These are mode register values for various uses */
#define AM9513_TICK_MODE (AM9513_F2+0x22) /* F2 + Operating mode D */
#define AM9513_UART_MODE (AM9513_F1+0x22) /* F1 + Operating mode D */
#define AM9513_FAST_LO_MODE (AM9513_F3+0x28) /* F3, repeat, count up */
#define AM9513_FAST_HI_MODE (0x0028) /* TC of LO, repeat, count up */
#endif /* _AM9513REG_H */
Reference in New Issue View Git Blame Copy Permalink