4c9516aa3b
of the queue. Load is now properly balanced across all disks of the same bus.
1862 lines
58 KiB
C
1862 lines
58 KiB
C
/* $NetBSD: siop.c,v 1.10 2000/05/05 09:05:44 bouyer Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2000 Manuel Bouyer.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Manuel Bouyer
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/* SYM53c7/8xx PCI-SCSI I/O Processors driver */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/scsiio.h>
|
|
|
|
#include <machine/endian.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/vm_kern.h>
|
|
|
|
#include <dev/microcode/siop/siop.out>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsi_message.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <dev/ic/siopreg.h>
|
|
#include <dev/ic/siopvar.h>
|
|
|
|
#undef DEBUG
|
|
#undef DEBUG_DR
|
|
#undef DEBUG_INTR
|
|
#undef DEBUG_SHED
|
|
#undef DUMP_SCRIPT
|
|
|
|
#define SIOP_STATS
|
|
|
|
#ifndef SIOP_DEFAULT_TARGET
|
|
#define SIOP_DEFAULT_TARGET 7
|
|
#endif
|
|
|
|
#define MEM_SIZE 8192
|
|
#define CMD_OFF 4096
|
|
|
|
/* tables used by SCRIPT */
|
|
typedef struct scr_table {
|
|
u_int32_t count;
|
|
u_int32_t addr;
|
|
} scr_table_t ;
|
|
|
|
/* Number of scatter/gather entries */
|
|
#define SIOP_NSG (MAXPHYS/NBPG + 1)
|
|
|
|
/*
|
|
* This structure interfaces the SCRIPT with the driver; it describes a full
|
|
* transfert. It lives in the same chunk of DMA-safe memory as the script.
|
|
*/
|
|
struct siop_xfer {
|
|
u_int8_t msg_out[8]; /* 0 */
|
|
u_int8_t msg_in[8]; /* 8 */
|
|
int status; /* 16 */
|
|
u_int32_t pad1; /* 20 */
|
|
u_int32_t id; /* 24 */
|
|
u_int32_t pad2; /* 28 */
|
|
scr_table_t t_msgin; /* 32 */
|
|
scr_table_t t_extmsgin; /* 40 */
|
|
scr_table_t t_extmsgdata; /* 48 */
|
|
scr_table_t t_extmsgtag; /* 56 */
|
|
scr_table_t t_msgout; /* 64 */
|
|
scr_table_t cmd; /* 72 */
|
|
scr_table_t t_status; /* 80 */
|
|
scr_table_t data[SIOP_NSG]; /* 88 */
|
|
} __attribute__((__packed__));
|
|
|
|
/*
|
|
* This decribes a command handled by the SCSI controller
|
|
* These are chained in either a free list or a active list
|
|
* We have one queue per target + (one at the adapter's target for probe)
|
|
*/
|
|
struct siop_cmd {
|
|
TAILQ_ENTRY (siop_cmd) next;
|
|
struct siop_target *siop_target; /* pointer to our target def */
|
|
struct scsipi_xfer *xs; /* xfer from the upper level */
|
|
struct siop_xfer *siop_table; /* tables dealing with this xfer */
|
|
bus_addr_t dsa; /* DSA value to load */
|
|
bus_dmamap_t dmamap_cmd;
|
|
bus_dmamap_t dmamap_data;
|
|
struct scsipi_sense rs_cmd; /* request sense command buffer */
|
|
int status;
|
|
int flags;
|
|
};
|
|
|
|
/* status defs */
|
|
#define CMDST_FREE 0 /* cmd slot is free */
|
|
#define CMDST_READY 1 /* cmd slot is waiting for processing */
|
|
#define CMDST_ACTIVE 2 /* cmd slot is being processed */
|
|
#define CMDST_SENSE 3 /* cmd slot is being requesting sense */
|
|
#define CMDST_SENSE_ACTIVE 4 /* request sense active */
|
|
#define CMDST_SENSE_DONE 5 /* request sense done */
|
|
#define CMDST_DONE 6 /* cmd slot has been processed */
|
|
/* flags defs */
|
|
#define CMDFL_TIMEOUT 0x0001 /* cmd timed out */
|
|
|
|
/* initial number of cmd descriptors */
|
|
#define SIOP_NCMD 10
|
|
|
|
/* per-target struct */
|
|
struct siop_target {
|
|
int status; /* target status see below */
|
|
int flags; /* target flags, see below */
|
|
u_int32_t id; /* for SELECT FROM */
|
|
struct cmd_list active_list[8]; /* per-lun active cmds */
|
|
struct siop_softc *siop_sc; /* points back to our adapter */
|
|
};
|
|
|
|
/* target status */
|
|
#define TARST_PROBING 0 /* target is being probed */
|
|
#define TARST_ASYNC 1 /* target needs sync/wide negotiation */
|
|
#define TARST_WIDE_NEG 2 /* target is doing wide negotiation */
|
|
#define TARST_SYNC_NEG 3 /* target is doing sync negotiation */
|
|
#define TARST_OK 4 /* sync/wide agreement is valid */
|
|
|
|
/* target flags */
|
|
#define TARF_SYNC 0x00 /* target is sync */
|
|
#define TARF_WIDE 0x01 /* target is wide */
|
|
|
|
void siop_reset __P((struct siop_softc *));
|
|
void siop_handle_reset __P((struct siop_softc *));
|
|
void siop_scsicmd_end __P((struct siop_cmd *));
|
|
void siop_wdtr_neg __P((struct siop_cmd *siop_cmd));
|
|
void siop_sdtr_neg __P((struct siop_cmd *siop_cmd));
|
|
void siop_start __P((struct siop_softc *));
|
|
void siop_timeout __P((void *));
|
|
void siop_minphys __P((struct buf *));
|
|
int siop_ioctl __P((struct scsipi_link *, u_long,
|
|
caddr_t, int, struct proc *));
|
|
int siop_scsicmd __P((struct scsipi_xfer *));
|
|
void siop_sdp __P((struct siop_cmd *));
|
|
void siop_clearfifo __P((struct siop_softc *));
|
|
void siop_ssg __P((struct siop_cmd *));
|
|
void siop_dump_script __P((struct siop_softc *));
|
|
|
|
struct scsipi_adapter siop_adapter = {
|
|
0,
|
|
siop_scsicmd,
|
|
siop_minphys,
|
|
siop_ioctl,
|
|
NULL,
|
|
};
|
|
|
|
struct scsipi_device siop_dev = {
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
#ifdef SIOP_STATS
|
|
static int siop_stat_intr = 0;
|
|
static int siop_stat_intr_shortxfer = 0;
|
|
static int siop_stat_intr_sdp = 0;
|
|
static int siop_stat_intr_done = 0;
|
|
static int siop_stat_intr_reselect = 0;
|
|
static int siop_stat_intr_xferdisc = 0;
|
|
void siop_printstats __P((void));
|
|
#define INCSTAT(x) x++
|
|
#else
|
|
#define INCSTAT(x)
|
|
#endif
|
|
|
|
static __inline__ void siop_table_sync __P((struct siop_cmd *, int));
|
|
static __inline__ void
|
|
siop_table_sync(siop_cmd, ops)
|
|
struct siop_cmd *siop_cmd;
|
|
int ops;
|
|
{
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
bus_addr_t offset;
|
|
|
|
offset = siop_cmd->dsa - sc->sc_scriptdma->dm_segs[0].ds_addr;
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_scriptdma, offset,
|
|
sizeof(struct siop_xfer), ops);
|
|
}
|
|
|
|
static __inline__ void siop_script_sync __P((struct siop_softc *, int));
|
|
static __inline__ void
|
|
siop_script_sync(sc, ops)
|
|
struct siop_softc *sc;
|
|
int ops;
|
|
{
|
|
bus_dmamap_sync(sc->sc_dmat, sc->sc_scriptdma, 0, CMD_OFF, ops);
|
|
}
|
|
|
|
void
|
|
siop_attach(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
int error, i;
|
|
bus_dma_segment_t seg;
|
|
int rseg;
|
|
|
|
/*
|
|
* Allocate DMA-safe memory for the script itself and internal
|
|
* variables and map it.
|
|
*/
|
|
error = bus_dmamem_alloc(sc->sc_dmat, MEM_SIZE,
|
|
NBPG, 0, &seg, 1, &rseg, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to allocate script DMA memory, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, MEM_SIZE,
|
|
(caddr_t *)&sc->sc_script, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
|
|
if (error) {
|
|
printf("%s: unable to map script DMA memory, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
error = bus_dmamap_create(sc->sc_dmat, MEM_SIZE, 1,
|
|
MEM_SIZE, 0, BUS_DMA_NOWAIT, &sc->sc_scriptdma);
|
|
if (error) {
|
|
printf("%s: unable to create script DMA map, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
error = bus_dmamap_load(sc->sc_dmat, sc->sc_scriptdma, sc->sc_script,
|
|
MEM_SIZE, NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load script DMA map, error = %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
TAILQ_INIT(&sc->free_list);
|
|
/* allocate cmd list */
|
|
sc->cmds =
|
|
malloc(sizeof(struct siop_cmd) * SIOP_NCMD, M_DEVBUF, M_NOWAIT);
|
|
if (sc->cmds == NULL) {
|
|
printf("%s: can't allocate memory for command descriptors\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
for (i = 0; i < SIOP_NCMD; i++) {
|
|
error = bus_dmamap_create(sc->sc_dmat, MAXPHYS, SIOP_NSG,
|
|
MAXPHYS, 0, BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
|
|
&sc->cmds[i].dmamap_data);
|
|
if (error) {
|
|
printf("%s: unable to create data DMA map for cbd %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
error = bus_dmamap_create(sc->sc_dmat,
|
|
sizeof(struct scsipi_generic), 1,
|
|
sizeof(struct scsipi_generic), 0,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
|
|
&sc->cmds[i].dmamap_cmd);
|
|
if (error) {
|
|
printf("%s: unable to create cmd DMA map for cbd %d\n",
|
|
sc->sc_dev.dv_xname, error);
|
|
return;
|
|
}
|
|
sc->cmds[i].siop_table =
|
|
&((struct siop_xfer *)(&sc->sc_script[CMD_OFF/4]))[i];
|
|
memset(sc->cmds[i].siop_table, 0, sizeof(struct siop_xfer));
|
|
sc->cmds[i].dsa = sc->sc_scriptdma->dm_segs[0].ds_addr +
|
|
CMD_OFF + i * sizeof(struct siop_xfer);
|
|
sc->cmds[i].status = CMDST_FREE;
|
|
sc->cmds[i].siop_table->t_msgout.count= htole32(1);
|
|
sc->cmds[i].siop_table->t_msgout.addr =
|
|
htole32(sc->cmds[i].dsa);
|
|
sc->cmds[i].siop_table->t_msgin.count= htole32(1);
|
|
sc->cmds[i].siop_table->t_msgin.addr =
|
|
htole32(sc->cmds[i].dsa + 8);
|
|
sc->cmds[i].siop_table->t_extmsgin.count= htole32(2);
|
|
sc->cmds[i].siop_table->t_extmsgin.addr =
|
|
htole32(le32toh(sc->cmds[i].siop_table->t_msgin.addr) + 1);
|
|
sc->cmds[i].siop_table->t_status.count= htole32(1);
|
|
sc->cmds[i].siop_table->t_status.addr =
|
|
htole32(le32toh(sc->cmds[i].siop_table->t_msgin.addr) + 8);
|
|
TAILQ_INSERT_TAIL(&sc->free_list, &sc->cmds[i], next);
|
|
#ifdef DEBUG
|
|
printf("tables[%d]: out=0x%x in=0x%x status=0x%x\n", i,
|
|
le32toh(sc->cmds[i].siop_table->t_msgin.addr),
|
|
le32toh(sc->cmds[i].siop_table->t_msgout.addr),
|
|
le32toh(sc->cmds[i].siop_table->t_status.addr));
|
|
#endif
|
|
}
|
|
/* compute number of sheduler slots */
|
|
sc->sc_nshedslots = (
|
|
CMD_OFF /* memory size allocated for scripts */
|
|
- sizeof(siop_script) /* memory for main script */
|
|
+ 8 /* extra NOP at end of main script */
|
|
- sizeof(endslot_script) /* memory needed at end of sheduler */
|
|
) / (sizeof(slot_script) - 8);
|
|
sc->sc_currshedslot = 0;
|
|
#ifdef DEBUG
|
|
printf("%s: script size = %d, PHY addr=0x%x, VIRT=%p nslots %d\n",
|
|
sc->sc_dev.dv_xname, (int)sizeof(siop_script),
|
|
(u_int)sc->sc_scriptdma->dm_segs[0].ds_addr, sc->sc_script,
|
|
sc->sc_nshedslots);
|
|
#endif
|
|
|
|
sc->sc_link.adapter_softc = sc;
|
|
sc->sc_link.openings = 1;
|
|
sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE;
|
|
sc->sc_link.scsipi_scsi.max_target =
|
|
(sc->features & SF_BUS_WIDE) ? 15 : 7;
|
|
sc->sc_link.scsipi_scsi.max_lun = 7;
|
|
sc->sc_link.scsipi_scsi.adapter_target = bus_space_read_1(sc->sc_rt,
|
|
sc->sc_rh, SIOP_SCID);
|
|
if (sc->sc_link.scsipi_scsi.adapter_target == 0 ||
|
|
sc->sc_link.scsipi_scsi.adapter_target >
|
|
sc->sc_link.scsipi_scsi.max_target)
|
|
sc->sc_link.scsipi_scsi.adapter_target = SIOP_DEFAULT_TARGET;
|
|
sc->sc_link.type = BUS_SCSI;
|
|
sc->sc_link.adapter = &siop_adapter;
|
|
sc->sc_link.device = &siop_dev;
|
|
sc->sc_link.flags = 0;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
sc->targets[i] = NULL;
|
|
|
|
/* find min/max sync period for this chip */
|
|
sc->maxsync = 0;
|
|
sc->minsync = 255;
|
|
for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]); i++) {
|
|
if (sc->clock_period != scf_period[i].clock)
|
|
continue;
|
|
if (sc->maxsync < scf_period[i].period)
|
|
sc->maxsync = scf_period[i].period;
|
|
if (sc->minsync > scf_period[i].period)
|
|
sc->minsync = scf_period[i].period;
|
|
}
|
|
if (sc->maxsync == 255 || sc->minsync == 0)
|
|
panic("siop: can't find my sync parameters\n");
|
|
siop_reset(sc);
|
|
#ifdef DUMP_SCRIPT
|
|
siop_dump_script(sc);
|
|
#endif
|
|
|
|
config_found((struct device*)sc, &sc->sc_link, scsiprint);
|
|
}
|
|
|
|
void
|
|
siop_reset(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
int i, j;
|
|
u_int32_t *scr;
|
|
u_int32_t stest3;
|
|
bus_addr_t physaddr;
|
|
|
|
/* reset the chip */
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SRST);
|
|
delay(1000);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, 0);
|
|
|
|
/* copy and patch the script */
|
|
for (j = 0; j < (sizeof(siop_script) / sizeof(siop_script[0])); j++) {
|
|
sc->sc_script[j] = htole32(siop_script[j]);
|
|
}
|
|
/* copy the sheduler slots script */
|
|
for (i = 0; i < sc->sc_nshedslots; i++) {
|
|
scr = &sc->sc_script[Ent_sheduler / 4 + (Ent_nextslot / 4) * i];
|
|
physaddr = sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_sheduler
|
|
+ Ent_nextslot * i;
|
|
for (j = 0; j < (sizeof(slot_script) / sizeof(slot_script[0]));
|
|
j++) {
|
|
scr[j] = htole32(slot_script[j]);
|
|
}
|
|
/*
|
|
* save current jump offset and patch MOVE MEMORY operands
|
|
* to restore it.
|
|
*/
|
|
scr[Ent_slotdata/4 + 1] = scr[Ent_slot/4 + 1];
|
|
scr[E_slot_nextp_Used[0]] = htole32(physaddr + Ent_slot + 4);
|
|
scr[E_slot_shed_addrsrc_Used[0]] = htole32(physaddr +
|
|
Ent_slotdata + 4);
|
|
/* JUMP selected, in main script */
|
|
scr[E_slot_abs_selected_Used[0]] =
|
|
htole32(sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_selected);
|
|
/* JUMP addr if SELECT fail */
|
|
scr[E_slot_abs_reselect_Used[0]] =
|
|
htole32(sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_reselect);
|
|
}
|
|
/* Now the final JUMP */
|
|
scr = &sc->sc_script[Ent_sheduler / 4 +
|
|
(Ent_nextslot / 4) * sc->sc_nshedslots];
|
|
for (j = 0; j < (sizeof(endslot_script) / sizeof(endslot_script[0]));
|
|
j++) {
|
|
scr[j] = htole32(endslot_script[j]);
|
|
}
|
|
scr[E_endslot_abs_reselect_Used[0]] =
|
|
htole32(sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_reselect);
|
|
|
|
/* init registers */
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL0,
|
|
SCNTL0_ARB_MASK | SCNTL0_EPC | SCNTL0_AAP);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, 0);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3, sc->clock_div);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DIEN, 0xff);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN0,
|
|
0xff & ~(SIEN0_CMP | SIEN0_SEL | SIEN0_RSL));
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SIEN1,
|
|
0xff & ~(SIEN1_HTH | SIEN1_GEN));
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST2, STEST2_EXT);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, STEST3_TE);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STIME0,
|
|
(0xb << STIME0_SEL_SHIFT));
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCID,
|
|
sc->sc_link.scsipi_scsi.adapter_target | SCID_RRE);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_RESPID0,
|
|
1 << sc->sc_link.scsipi_scsi.adapter_target);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_DCNTL, DCNTL_COM);
|
|
|
|
/* enable clock doubler or quadruler if appropriate */
|
|
if (sc->features & (SF_CHIP_DBLR | SF_CHIP_QUAD)) {
|
|
stest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1,
|
|
STEST1_DBLEN);
|
|
if (sc->features & SF_CHIP_QUAD) {
|
|
/* wait for PPL to lock */
|
|
while ((bus_space_read_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_STEST4) & STEST4_LOCK) == 0)
|
|
delay(10);
|
|
} else {
|
|
/* data sheet says 20us - more won't hurt */
|
|
delay(100);
|
|
}
|
|
/* halt scsi clock, select doubler/quad, restart clock */
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3,
|
|
stest3 | STEST3_HSC);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1,
|
|
STEST1_DBLEN | STEST1_DBLSEL);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST3, stest3);
|
|
} else {
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_STEST1, 0);
|
|
}
|
|
|
|
/* start script */
|
|
siop_script_sync(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP,
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_reselect);
|
|
}
|
|
|
|
#if 0
|
|
#define CALL_SCRIPT(ent) do {\
|
|
printf ("start script DSA 0x%lx DSP 0x%lx\n", \
|
|
siop_cmd->dsa, \
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr + ent); \
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, sc->sc_scriptdma->dm_segs[0].ds_addr + ent); \
|
|
} while (0)
|
|
#else
|
|
#define CALL_SCRIPT(ent) do {\
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP, sc->sc_scriptdma->dm_segs[0].ds_addr + ent); \
|
|
} while (0)
|
|
#endif
|
|
|
|
int
|
|
siop_intr(v)
|
|
void *v;
|
|
{
|
|
struct siop_softc *sc = v;
|
|
struct siop_target *siop_target;
|
|
struct siop_cmd *siop_cmd;
|
|
struct scsipi_xfer *xs;
|
|
int istat, sist0, sist1, sstat1, dstat, scntl1;
|
|
u_int32_t irqcode;
|
|
int need_reset = 0;
|
|
int offset, target, lun;
|
|
bus_addr_t dsa;
|
|
|
|
istat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT);
|
|
if ((istat & (ISTAT_INTF | ISTAT_DIP | ISTAT_SIP)) == 0)
|
|
return 0;
|
|
INCSTAT(siop_stat_intr);
|
|
if (istat & ISTAT_INTF) {
|
|
printf("INTRF\n");
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_INTF);
|
|
}
|
|
/* use DSA to find the current siop_cmd */
|
|
dsa = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA);
|
|
if (dsa >= sc->sc_scriptdma->dm_segs[0].ds_addr + CMD_OFF &&
|
|
dsa < sc->sc_scriptdma->dm_segs[0].ds_addr + CMD_OFF +
|
|
SIOP_NCMD * sizeof(struct siop_xfer)) {
|
|
dsa -= sc->sc_scriptdma->dm_segs[0].ds_addr + CMD_OFF;
|
|
siop_cmd = &sc->cmds[dsa / sizeof(struct siop_xfer)];
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
} else {
|
|
printf("%s: current DSA invalid\n",
|
|
sc->sc_dev.dv_xname);
|
|
siop_cmd = NULL;
|
|
}
|
|
if (istat & ISTAT_DIP) {
|
|
u_int32_t *p;
|
|
dstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DSTAT);
|
|
if (dstat & DSTAT_SSI) {
|
|
printf("single step dsp 0x%08x dsa 0x08%x\n",
|
|
(int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr),
|
|
bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA));
|
|
if ((dstat & ~(DSTAT_DFE | DSTAT_SSI)) == 0 &&
|
|
(istat & ISTAT_SIP) == 0) {
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_DCNTL, bus_space_read_1(sc->sc_rt,
|
|
sc->sc_rh, SIOP_DCNTL) | DCNTL_STD);
|
|
}
|
|
return 1;
|
|
}
|
|
if (dstat & ~(DSTAT_SIR | DSTAT_DFE | DSTAT_SSI)) {
|
|
printf("DMA IRQ:");
|
|
if (dstat & DSTAT_IID)
|
|
printf(" Illegal instruction");
|
|
if (dstat & DSTAT_ABRT)
|
|
printf(" abort");
|
|
if (dstat & DSTAT_BF)
|
|
printf(" bus fault");
|
|
if (dstat & DSTAT_MDPE)
|
|
printf(" parity");
|
|
if (dstat & DSTAT_DFE)
|
|
printf(" dma fifo empty");
|
|
printf(", DSP=0x%x DSA=0x%x: ",
|
|
(int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr),
|
|
bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA));
|
|
p = sc->sc_script +
|
|
(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr - 8) / 4;
|
|
printf("0x%x 0x%x 0x%x 0x%x\n", le32toh(p[0]), le32toh(p[1]),
|
|
le32toh(p[2]), le32toh(p[3]));
|
|
if (siop_cmd)
|
|
printf("last msg_in=0x%x status=0x%x\n",
|
|
siop_cmd->siop_table->msg_in[0],
|
|
le32toh(siop_cmd->siop_table->status));
|
|
need_reset = 1;
|
|
}
|
|
}
|
|
if (istat & ISTAT_SIP) {
|
|
/*
|
|
* SCSI interrupt. If current command is not active,
|
|
* we don't need siop_cmd
|
|
*/
|
|
if (siop_cmd->status != CMDST_ACTIVE &&
|
|
siop_cmd->status != CMDST_SENSE_ACTIVE) {
|
|
siop_cmd = NULL;
|
|
}
|
|
if (istat & ISTAT_DIP)
|
|
delay(10);
|
|
sist0 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST0);
|
|
delay(10);
|
|
sist1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SIST1);
|
|
sstat1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1);
|
|
#ifdef DEBUG_INTR
|
|
printf("scsi interrupt, sist0=0x%x sist1=0x%x sstat1=0x%x "
|
|
"DSA=0x%x DSP=0x%lx\n", sist0, sist1,
|
|
bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1),
|
|
bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA),
|
|
(u_long)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr));
|
|
#endif
|
|
if (siop_cmd) {
|
|
xs = siop_cmd->xs;
|
|
siop_target = siop_cmd->siop_target;
|
|
}
|
|
if (sist0 & SIST0_RST) {
|
|
siop_handle_reset(sc);
|
|
siop_start(sc);
|
|
/* no table to flush here */
|
|
return 1;
|
|
}
|
|
if (sist0 & SIST0_SGE) {
|
|
if (siop_cmd)
|
|
scsi_print_addr(xs->sc_link);
|
|
else
|
|
printf("%s:", sc->sc_dev.dv_xname);
|
|
printf("scsi gross error\n");
|
|
goto reset;
|
|
}
|
|
if ((sist0 & SIST0_MA) && need_reset == 0) {
|
|
if (siop_cmd) {
|
|
int scratcha0;
|
|
dstat = bus_space_read_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_DSTAT);
|
|
/*
|
|
* first restore DSA, in case we were in a S/G
|
|
* operation.
|
|
*/
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh,
|
|
SIOP_DSA, siop_cmd->dsa);
|
|
scratcha0 = bus_space_read_1(sc->sc_rt,
|
|
sc->sc_rh, SIOP_SCRATCHA);
|
|
switch (sstat1 & SSTAT1_PHASE_MASK) {
|
|
case SSTAT1_PHASE_STATUS:
|
|
/*
|
|
* previous phase may be aborted for any reason
|
|
* ( for example, the target has less data to
|
|
* transfer than requested). Just go to status
|
|
* and the command should terminate.
|
|
*/
|
|
INCSTAT(siop_stat_intr_shortxfer);
|
|
CALL_SCRIPT(Ent_status);
|
|
if ((dstat & DSTAT_DFE) == 0)
|
|
siop_clearfifo(sc);
|
|
/* no table to flush here */
|
|
return 1;
|
|
case SSTAT1_PHASE_MSGIN:
|
|
/*
|
|
* target may be ready to disconnect
|
|
* Save data pointers just in case.
|
|
*/
|
|
INCSTAT(siop_stat_intr_xferdisc);
|
|
if (scratcha0 & A_flag_data)
|
|
siop_sdp(siop_cmd);
|
|
else if ((dstat & DSTAT_DFE) == 0)
|
|
siop_clearfifo(sc);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_SCRATCHA,
|
|
scratcha0 & ~A_flag_data);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD |
|
|
BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_msgin);
|
|
return 1;
|
|
}
|
|
printf("%s: unexpected phase mismatch %d\n",
|
|
sc->sc_dev.dv_xname,
|
|
sstat1 & SSTAT1_PHASE_MASK);
|
|
} else {
|
|
printf("%s: phase mismatch without command\n",
|
|
sc->sc_dev.dv_xname);
|
|
}
|
|
need_reset = 1;
|
|
}
|
|
if (sist0 & SIST0_PAR) {
|
|
/* parity error, reset */
|
|
if (siop_cmd)
|
|
scsi_print_addr(xs->sc_link);
|
|
else
|
|
printf("%s:", sc->sc_dev.dv_xname);
|
|
printf("parity error\n");
|
|
need_reset = 1;
|
|
}
|
|
if ((sist1 & SIST1_STO) && need_reset == 0) {
|
|
/* selection time out, assume there's no device here */
|
|
if (siop_cmd) {
|
|
siop_cmd->status = CMDST_DONE;
|
|
xs->error = XS_SELTIMEOUT;
|
|
goto end;
|
|
} else {
|
|
printf("%s: selection timeout without "
|
|
"command\n", sc->sc_dev.dv_xname);
|
|
need_reset = 1;
|
|
}
|
|
}
|
|
if (sist0 & SIST0_UDC) {
|
|
/*
|
|
* unexpected disconnect. Usually the target signals
|
|
* a fatal condition this way. Attempt to get sense.
|
|
*/
|
|
if (siop_cmd)
|
|
goto check_sense;
|
|
printf("%s: unexpected disconnect without "
|
|
"command\n", sc->sc_dev.dv_xname);
|
|
goto reset;
|
|
}
|
|
/* Else it's an unhandled exeption (for now). */
|
|
printf("%s: unhandled scsi interrupt, sist0=0x%x sist1=0x%x "
|
|
"sstat1=0x%x DSA=0x%x DSP=0x%x\n", sc->sc_dev.dv_xname,
|
|
sist0, sist1,
|
|
bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT1),
|
|
bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSA),
|
|
(int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr));
|
|
if (siop_cmd) {
|
|
siop_cmd->status = CMDST_DONE;
|
|
xs->error = XS_SELTIMEOUT;
|
|
goto end;
|
|
}
|
|
need_reset = 1;
|
|
}
|
|
if (need_reset) {
|
|
reset:
|
|
/* fatal error, reset the bus */
|
|
scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1,
|
|
scntl1 | SCNTL1_RST);
|
|
/* minimum 25 us, more time won't hurt */
|
|
delay(100);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1);
|
|
/* no table to flush here */
|
|
return 1;
|
|
}
|
|
|
|
|
|
if ((istat & ISTAT_DIP) && (dstat & DSTAT_SIR)) { /* script interrupt */
|
|
irqcode = bus_space_read_4(sc->sc_rt, sc->sc_rh,
|
|
SIOP_DSPS);
|
|
#ifdef DEBUG_INTR
|
|
printf("script interrupt 0x%x\n", irqcode);
|
|
#endif
|
|
/*
|
|
* an inactive command is only valid if it's a reselect
|
|
* interrupt: we'll change siop_cmd to point to the rigth one
|
|
* just here
|
|
*/
|
|
if (irqcode != A_int_resel &&
|
|
siop_cmd->status != CMDST_ACTIVE &&
|
|
siop_cmd->status != CMDST_SENSE_ACTIVE) {
|
|
printf("%s: Aie, no command (IRQ code 0x%x current "
|
|
"status %d) !\n", sc->sc_dev.dv_xname,
|
|
irqcode, siop_cmd->status);
|
|
xs = NULL;
|
|
} else {
|
|
xs = siop_cmd->xs;
|
|
siop_target = siop_cmd->siop_target;
|
|
}
|
|
switch(irqcode) {
|
|
case A_int_err:
|
|
printf("error, DSP=0x%x\n",
|
|
(int)(bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DSP) -
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr));
|
|
if (xs) {
|
|
xs->error = XS_SELTIMEOUT;
|
|
goto end;
|
|
} else {
|
|
goto reset;
|
|
}
|
|
case A_int_msgin:
|
|
if (siop_cmd->siop_table->msg_in[0] ==
|
|
MSG_MESSAGE_REJECT) {
|
|
int msg, extmsg;
|
|
if (siop_cmd->siop_table->msg_out[0] & 0x80) {
|
|
/*
|
|
* message was part of a identify +
|
|
* something else. Identify shoudl't
|
|
* have been rejected.
|
|
*/
|
|
msg = siop_cmd->siop_table->msg_out[1];
|
|
extmsg =
|
|
siop_cmd->siop_table->msg_out[3];
|
|
} else {
|
|
msg = siop_cmd->siop_table->msg_out[0];
|
|
extmsg =
|
|
siop_cmd->siop_table->msg_out[2];
|
|
}
|
|
if (msg == MSG_MESSAGE_REJECT) {
|
|
/* MSG_REJECT for a MSG_REJECT !*/
|
|
if (xs)
|
|
scsi_print_addr(xs->sc_link);
|
|
else
|
|
printf("%s: ",
|
|
sc->sc_dev.dv_xname);
|
|
printf("our reject message was "
|
|
"rejected\n");
|
|
goto reset;
|
|
}
|
|
if (msg == MSG_EXTENDED &&
|
|
extmsg == MSG_EXT_WDTR) {
|
|
/* WDTR rejected, initiate sync */
|
|
printf("%s: target %d using 8bit "
|
|
"transfers\n", sc->sc_dev.dv_xname,
|
|
xs->sc_link->scsipi_scsi.target);
|
|
siop_target->status = TARST_SYNC_NEG;
|
|
siop_cmd->siop_table->msg_out[0] =
|
|
MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[1] =
|
|
MSG_EXT_SDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[2] =
|
|
MSG_EXT_SDTR;
|
|
siop_cmd->siop_table->msg_out[3] =
|
|
sc->minsync;
|
|
siop_cmd->siop_table->msg_out[4] =
|
|
sc->maxoff;
|
|
siop_cmd->siop_table->t_msgout.count =
|
|
htole32(MSG_EXT_SDTR_LEN + 2);
|
|
siop_cmd->siop_table->t_msgout.addr =
|
|
htole32(siop_cmd->dsa);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD |
|
|
BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
return 1;
|
|
} else if (msg == MSG_EXTENDED &&
|
|
extmsg == MSG_EXT_SDTR) {
|
|
/* sync rejected */
|
|
printf("%s: target %d asynchronous\n",
|
|
sc->sc_dev.dv_xname,
|
|
xs->sc_link->scsipi_scsi.target);
|
|
siop_cmd->siop_target->status =
|
|
TARST_OK;
|
|
/* no table to flush here */
|
|
CALL_SCRIPT(Ent_msgin_ack);
|
|
return 1;
|
|
}
|
|
if (xs)
|
|
scsi_print_addr(xs->sc_link);
|
|
else
|
|
printf("%s: ", sc->sc_dev.dv_xname);
|
|
if (msg == MSG_EXTENDED) {
|
|
printf("scsi message reject, extended "
|
|
"message sent was 0x%x\n", extmsg);
|
|
} else {
|
|
printf("scsi message reject, message "
|
|
"sent was 0x%x\n", msg);
|
|
}
|
|
/* no table to flush here */
|
|
CALL_SCRIPT(Ent_msgin_ack);
|
|
return 1;
|
|
}
|
|
if (xs)
|
|
scsi_print_addr(xs->sc_link);
|
|
else
|
|
printf("%s: ", sc->sc_dev.dv_xname);
|
|
printf("unhandled message 0x%x\n",
|
|
siop_cmd->siop_table->msg_in[0]);
|
|
siop_cmd->siop_table->t_msgout.count= htole32(1);
|
|
siop_cmd->siop_table->t_msgout.addr =
|
|
htole32(siop_cmd->dsa);
|
|
siop_cmd->siop_table->msg_out[0] = MSG_MESSAGE_REJECT;
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
return 1;
|
|
case A_int_extmsgin:
|
|
#ifdef DEBUG_INTR
|
|
printf("extended message: msg 0x%x len %d\n",
|
|
siop_cmd->siop_table->msg_in[2],
|
|
siop_cmd->siop_table->msg_in[1]);
|
|
#endif
|
|
if (siop_cmd->siop_table->msg_in[1] > 6)
|
|
printf("%s: extended message too big (%d)\n",
|
|
sc->sc_dev.dv_xname,
|
|
siop_cmd->siop_table->msg_in[1]);
|
|
siop_cmd->siop_table->t_extmsgdata.count =
|
|
htole32(siop_cmd->siop_table->msg_in[1] - 1);
|
|
siop_cmd->siop_table->t_extmsgdata.addr =
|
|
htole32(
|
|
le32toh(siop_cmd->siop_table->t_extmsgin.addr)
|
|
+ 2);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_get_extmsgdata);
|
|
return 1;
|
|
case A_int_extmsgdata:
|
|
#ifdef DEBUG_INTR
|
|
{
|
|
int i;
|
|
printf("extended message: 0x%x, data:",
|
|
siop_cmd->siop_table->msg_in[2]);
|
|
for (i = 3; i < 2 + siop_cmd->siop_table->msg_in[1];
|
|
i++)
|
|
printf(" 0x%x",
|
|
siop_cmd->siop_table->msg_in[i]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
if (siop_cmd->siop_table->msg_in[2] == MSG_EXT_WDTR) {
|
|
siop_wdtr_neg(siop_cmd);
|
|
return(1);
|
|
}
|
|
if (siop_cmd->siop_table->msg_in[2] == MSG_EXT_SDTR) {
|
|
siop_sdtr_neg(siop_cmd);
|
|
return(1);
|
|
}
|
|
/* send a message reject */
|
|
siop_cmd->siop_table->t_msgout.count =
|
|
htole32(1);
|
|
siop_cmd->siop_table->t_msgout.addr =
|
|
htole32(siop_cmd->dsa);
|
|
siop_cmd->siop_table->msg_out[0] =
|
|
MSG_MESSAGE_REJECT;
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
return 1;
|
|
case A_int_resel: /* reselected */
|
|
INCSTAT(siop_stat_intr_reselect);
|
|
if ((siop_cmd->siop_table->msg_in[0] & 0x80) == 0) {
|
|
printf("%s: reselect without identify (%d)\n",
|
|
sc->sc_dev.dv_xname,
|
|
siop_cmd->siop_table->msg_in[0]);
|
|
goto reset;
|
|
}
|
|
target = bus_space_read_1(sc->sc_rt,
|
|
sc->sc_rh, SIOP_SCRATCHA);
|
|
if ((target & 0x80) == 0) {
|
|
printf("reselect without id (%d)\n", target);
|
|
goto reset;
|
|
}
|
|
target &= 0x0f;
|
|
lun = siop_cmd->siop_table->msg_in[0] & 0x07;
|
|
#ifdef DEBUG_DR
|
|
printf("reselected by target %d lun %d\n",
|
|
target, lun);
|
|
#endif
|
|
siop_cmd =
|
|
sc->targets[target]->active_list[lun].tqh_first;
|
|
if (siop_cmd == NULL) {
|
|
printf("%s: reselected without cmd\n",
|
|
sc->sc_dev.dv_xname);
|
|
goto reset;
|
|
}
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSA,
|
|
siop_cmd->dsa);
|
|
/* no table to flush */
|
|
CALL_SCRIPT(Ent_selected);
|
|
return 1;
|
|
case A_int_disc:
|
|
INCSTAT(siop_stat_intr_sdp);
|
|
offset = bus_space_read_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_SCRATCHA + 1);
|
|
#ifdef DEBUG_DR
|
|
printf("disconnect offset %d\n", offset);
|
|
#endif
|
|
if (offset > SIOP_NSG) {
|
|
printf("%s: bad offset for disconnect (%d)\n",
|
|
sc->sc_dev.dv_xname, offset);
|
|
goto reset;
|
|
}
|
|
/*
|
|
* offset == SIOP_NSG may be a valid condition if
|
|
* we get a sdp when the xfer is done.
|
|
* Don't call memmove in this case.
|
|
*/
|
|
if (offset < SIOP_NSG) {
|
|
memmove(&siop_cmd->siop_table->data[0],
|
|
&siop_cmd->siop_table->data[offset],
|
|
(SIOP_NSG - offset) * sizeof(scr_table_t));
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
CALL_SCRIPT(Ent_sheduler);
|
|
return 1;
|
|
case A_int_resfail:
|
|
printf("reselect failed\n");
|
|
CALL_SCRIPT(Ent_sheduler);
|
|
return 1;
|
|
case A_int_done:
|
|
if (xs == NULL) {
|
|
printf("%s: done without command, DSA=0x%lx\n",
|
|
sc->sc_dev.dv_xname, (u_long)siop_cmd->dsa);
|
|
siop_cmd->status = CMDST_FREE;
|
|
CALL_SCRIPT(Ent_sheduler);
|
|
siop_start(sc);
|
|
return 1;
|
|
}
|
|
if (siop_target->status == TARST_PROBING)
|
|
siop_target->status = TARST_ASYNC;
|
|
#ifdef DEBUG_INTR
|
|
printf("done, DSA=0x%lx target id 0x%x last msg "
|
|
"in=0x%x status=0x%x\n", (u_long)siop_cmd->dsa,
|
|
le32toh(siop_cmd->siop_table->id),
|
|
siop_cmd->siop_table->msg_in[0],
|
|
le32toh(siop_cmd->siop_table->status));
|
|
#endif
|
|
INCSTAT(siop_stat_intr_done);
|
|
if (siop_cmd->status == CMDST_SENSE_ACTIVE)
|
|
siop_cmd->status = CMDST_SENSE_DONE;
|
|
else
|
|
siop_cmd->status = CMDST_DONE;
|
|
switch(le32toh(siop_cmd->siop_table->status)) {
|
|
case SCSI_OK:
|
|
xs->error = (siop_cmd->status == CMDST_DONE) ?
|
|
XS_NOERROR : XS_SENSE;
|
|
break;
|
|
case SCSI_BUSY:
|
|
xs->error = XS_BUSY;
|
|
break;
|
|
case SCSI_CHECK:
|
|
check_sense:
|
|
if (siop_cmd->status == CMDST_SENSE_DONE) {
|
|
/* request sense on a request sense ? */
|
|
printf("request sense failed\n");
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
} else {
|
|
siop_cmd->status = CMDST_SENSE;
|
|
}
|
|
break;
|
|
case 0xff:
|
|
/*
|
|
* the status byte was not updated, cmd was
|
|
* aborted
|
|
*/
|
|
xs->error = XS_SELTIMEOUT;
|
|
break;
|
|
default:
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
}
|
|
goto end;
|
|
default:
|
|
printf("unknown irqcode %x\n", irqcode);
|
|
xs->error = XS_SELTIMEOUT;
|
|
goto end;
|
|
}
|
|
return 1;
|
|
}
|
|
/* We just should't get there */
|
|
panic("siop_intr: I shouldn't be there !");
|
|
return 1;
|
|
end:
|
|
bus_space_write_4(sc->sc_rt, sc->sc_rh, SIOP_DSP,
|
|
sc->sc_scriptdma->dm_segs[0].ds_addr + Ent_sheduler);
|
|
lun = siop_cmd->xs->sc_link->scsipi_scsi.lun;
|
|
siop_scsicmd_end(siop_cmd);
|
|
if (siop_cmd->status == CMDST_FREE) {
|
|
TAILQ_REMOVE(&siop_target->active_list[lun],
|
|
siop_cmd, next);
|
|
TAILQ_INSERT_TAIL(&sc->free_list, siop_cmd, next);
|
|
}
|
|
siop_start(sc);
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
siop_scsicmd_end(siop_cmd)
|
|
struct siop_cmd *siop_cmd;
|
|
{
|
|
struct scsipi_xfer *xs = siop_cmd->xs;
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
|
|
if (siop_cmd->status != CMDST_SENSE_DONE &&
|
|
xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, 0,
|
|
siop_cmd->dmamap_data->dm_mapsize,
|
|
(xs->xs_control & XS_CTL_DATA_IN) ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_data);
|
|
}
|
|
bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd);
|
|
if (siop_cmd->status == CMDST_SENSE) {
|
|
/* issue a request sense for this target */
|
|
int error, i;
|
|
siop_cmd->rs_cmd.opcode = REQUEST_SENSE;
|
|
siop_cmd->rs_cmd.byte2 = xs->sc_link->scsipi_scsi.lun << 5;
|
|
siop_cmd->rs_cmd.unused[0] = siop_cmd->rs_cmd.unused[1] = 0;
|
|
siop_cmd->rs_cmd.length = sizeof(struct scsipi_sense_data);
|
|
siop_cmd->rs_cmd.control = 0;
|
|
siop_cmd->siop_table->status = htole32(0xff); /*invalid status*/
|
|
siop_cmd->siop_table->t_msgout.count= htole32(1);
|
|
siop_cmd->siop_table->t_msgout.addr = htole32(siop_cmd->dsa);
|
|
siop_cmd->siop_table->msg_out[0] =
|
|
MSG_IDENTIFY(xs->sc_link->scsipi_scsi.lun, 1);
|
|
error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_cmd,
|
|
&siop_cmd->rs_cmd, sizeof(struct scsipi_sense),
|
|
NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load cmd DMA map: %d",
|
|
sc->sc_dev.dv_xname, error);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
goto out;
|
|
}
|
|
siop_cmd->siop_table->cmd.count =
|
|
htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_len);
|
|
siop_cmd->siop_table->cmd.addr =
|
|
htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_addr);
|
|
error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_data,
|
|
&xs->sense.scsi_sense, sizeof(struct scsipi_sense_data),
|
|
NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load sense DMA map: %d",
|
|
sc->sc_dev.dv_xname, error);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd);
|
|
goto out;
|
|
}
|
|
for (i = 0; i < siop_cmd->dmamap_data->dm_nsegs; i++) {
|
|
siop_cmd->siop_table->data[i].count =
|
|
htole32(siop_cmd->dmamap_data->dm_segs[i].ds_len);
|
|
siop_cmd->siop_table->data[i].addr =
|
|
htole32(siop_cmd->dmamap_data->dm_segs[i].ds_addr);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, 0,
|
|
siop_cmd->dmamap_data->dm_mapsize, BUS_DMASYNC_PREREAD);
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_cmd, 0,
|
|
siop_cmd->dmamap_cmd->dm_mapsize, BUS_DMASYNC_PREWRITE);
|
|
siop_table_sync(siop_cmd, BUS_DMASYNC_PREWRITE);
|
|
return;
|
|
} else if (siop_cmd->status == CMDST_SENSE_DONE) {
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, 0,
|
|
siop_cmd->dmamap_data->dm_mapsize, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_data);
|
|
}
|
|
out:
|
|
callout_stop(&siop_cmd->xs->xs_callout);
|
|
siop_cmd->status = CMDST_FREE;
|
|
xs->xs_status |= XS_STS_DONE;
|
|
xs->resid = 0;
|
|
scsipi_done (xs);
|
|
}
|
|
|
|
void
|
|
siop_wdtr_neg(siop_cmd)
|
|
struct siop_cmd *siop_cmd;
|
|
{
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
struct siop_target *siop_target = siop_cmd->siop_target;
|
|
int target = siop_cmd->xs->sc_link->scsipi_scsi.target;
|
|
|
|
if (siop_target->status == TARST_WIDE_NEG) {
|
|
/* we initiated wide negotiation */
|
|
switch (siop_cmd->siop_table->msg_in[3]) {
|
|
case MSG_EXT_WDTR_BUS_8_BIT:
|
|
printf("%s: target %d using 8bit transfers\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
siop_target->flags &= ~SF_BUS_WIDE;
|
|
sc->targets[target]->id &= ~(SCNTL3_EWS << 24);
|
|
break;
|
|
case MSG_EXT_WDTR_BUS_16_BIT:
|
|
if (sc->features & SF_BUS_WIDE) {
|
|
printf("%s: target %d using 16bit transfers\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
siop_target->flags |= TARF_WIDE;
|
|
sc->targets[target]->id |= (SCNTL3_EWS << 24);
|
|
break;
|
|
}
|
|
/* FALLTHROUH */
|
|
default:
|
|
/*
|
|
* hum, we got more than what we can handle, shoudn't
|
|
* happen. Reject, and stay async
|
|
*/
|
|
siop_target->flags &= ~TARF_WIDE;
|
|
siop_target->status = TARST_OK;
|
|
printf("%s: rejecting invalid wide negotiation from "
|
|
"target %d (%d)\n", sc->sc_dev.dv_xname, target,
|
|
siop_cmd->siop_table->msg_in[3]);
|
|
siop_cmd->siop_table->t_msgout.count= htole32(1);
|
|
siop_cmd->siop_table->t_msgout.addr =
|
|
htole32(siop_cmd->dsa);
|
|
siop_cmd->siop_table->msg_out[0] = MSG_MESSAGE_REJECT;
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
return;
|
|
}
|
|
siop_cmd->siop_table->id =
|
|
htole32(sc->targets[target]->id);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_SCNTL3,
|
|
(sc->targets[target]->id >> 24) & 0xff);
|
|
/* we now need to do sync */
|
|
siop_target->status = TARST_SYNC_NEG;
|
|
siop_cmd->siop_table->msg_out[0] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[1] = MSG_EXT_SDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_SDTR;
|
|
siop_cmd->siop_table->msg_out[3] = sc->minsync;
|
|
siop_cmd->siop_table->msg_out[4] = sc->maxoff;
|
|
siop_cmd->siop_table->t_msgout.count =
|
|
htole32(MSG_EXT_SDTR_LEN + 2);
|
|
siop_cmd->siop_table->t_msgout.addr = htole32(siop_cmd->dsa);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
return;
|
|
} else {
|
|
/* target initiated wide negotiation */
|
|
if (siop_cmd->siop_table->msg_in[3] >= MSG_EXT_WDTR_BUS_16_BIT
|
|
&& (sc->features & SF_BUS_WIDE)) {
|
|
printf("%s: target %d using 16bit transfers\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
siop_target->flags |= TARF_WIDE;
|
|
sc->targets[target]->id |= SCNTL3_EWS << 24;
|
|
siop_cmd->siop_table->msg_out[3] =
|
|
MSG_EXT_WDTR_BUS_16_BIT;
|
|
} else {
|
|
printf("%s: target %d using 8bit transfers\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
siop_target->flags &= ~SF_BUS_WIDE;
|
|
sc->targets[target]->id &= ~(SCNTL3_EWS << 24);
|
|
siop_cmd->siop_table->msg_out[3] =
|
|
MSG_EXT_WDTR_BUS_8_BIT;
|
|
}
|
|
siop_cmd->siop_table->id =
|
|
htole32(sc->targets[target]->id);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3,
|
|
(sc->targets[target]->id >> 24) & 0xff);
|
|
/*
|
|
* we did reset wide parameters, so fall back to async,
|
|
* but don't shedule a sync neg, target should initiate it
|
|
*/
|
|
siop_target->status = TARST_OK;
|
|
siop_cmd->siop_table->msg_out[0] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[1] = MSG_EXT_WDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_WDTR;
|
|
siop_cmd->siop_table->t_msgout.count=
|
|
htole32(MSG_EXT_WDTR_LEN + 2);
|
|
siop_cmd->siop_table->t_msgout.addr = htole32(siop_cmd->dsa);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
}
|
|
}
|
|
|
|
void
|
|
siop_sdtr_neg(siop_cmd)
|
|
struct siop_cmd *siop_cmd;
|
|
{
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
struct siop_target *siop_target = siop_cmd->siop_target;
|
|
int target = siop_cmd->xs->sc_link->scsipi_scsi.target;
|
|
int sync, offset, i;
|
|
int send_msgout = 0;
|
|
|
|
sync = siop_cmd->siop_table->msg_in[3];
|
|
offset = siop_cmd->siop_table->msg_in[4];
|
|
|
|
if (siop_target->status == TARST_SYNC_NEG) {
|
|
/* we initiated sync negotiation */
|
|
siop_target->status = TARST_OK;
|
|
#ifdef DEBUG
|
|
printf("sdtr: sync %d offset %d\n", sync, offset);
|
|
#endif
|
|
if (offset > sc->maxoff || sync < sc->minsync ||
|
|
sync > sc->maxsync)
|
|
goto reject;
|
|
for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]);
|
|
i++) {
|
|
if (sc->clock_period != scf_period[i].clock)
|
|
continue;
|
|
if (scf_period[i].period == sync) {
|
|
/* ok, found it. we now are sync. */
|
|
printf("%s: target %d now synchronous at "
|
|
"%sMhz, offset %d\n", sc->sc_dev.dv_xname,
|
|
target, scf_period[i].rate, offset);
|
|
sc->targets[target]->id &=
|
|
~(SCNTL3_SCF_MASK << 24);
|
|
sc->targets[target]->id |= scf_period[i].scf
|
|
<< (24 + SCNTL3_SCF_SHIFT);
|
|
if (sync < 25) /* Ultra */
|
|
sc->targets[target]->id |=
|
|
SCNTL3_ULTRA << 24;
|
|
else
|
|
sc->targets[target]->id &=
|
|
~(SCNTL3_ULTRA << 24);
|
|
sc->targets[target]->id &=
|
|
~(SCXFER_MO_MASK << 8);
|
|
sc->targets[target]->id |=
|
|
(offset & SCXFER_MO_MASK) << 8;
|
|
goto end;
|
|
}
|
|
}
|
|
/*
|
|
* we didn't find it in our table, do async and send reject
|
|
* msg
|
|
*/
|
|
reject:
|
|
send_msgout = 1;
|
|
siop_cmd->siop_table->t_msgout.count= htole32(1);
|
|
siop_cmd->siop_table->msg_out[0] = MSG_MESSAGE_REJECT;
|
|
printf("%s: target %d asynchronous\n", sc->sc_dev.dv_xname,
|
|
target);
|
|
sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24);
|
|
sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24);
|
|
sc->targets[target]->id &= ~(SCXFER_MO_MASK << 8);
|
|
} else { /* target initiated sync neg */
|
|
#ifdef DEBUG
|
|
printf("sdtr (target): sync %d offset %d\n", sync, offset);
|
|
#endif
|
|
if (offset == 0 || sync > sc->maxsync) { /* async */
|
|
goto async;
|
|
}
|
|
if (offset > sc->maxoff)
|
|
offset = sc->maxoff;
|
|
if (sync < sc->minsync)
|
|
sync = sc->minsync;
|
|
/* look for sync period */
|
|
for (i = 0; i < sizeof(scf_period) / sizeof(scf_period[0]);
|
|
i++) {
|
|
if (sc->clock_period != scf_period[i].clock)
|
|
continue;
|
|
if (scf_period[i].period == sync) {
|
|
/* ok, found it. we now are sync. */
|
|
printf("%s: target %d now synchronous at "
|
|
"%sMhz, offset %d\n", sc->sc_dev.dv_xname,
|
|
target, scf_period[i].rate, offset);
|
|
sc->targets[target]->id &=
|
|
~(SCNTL3_SCF_MASK << 24);
|
|
sc->targets[target]->id |= scf_period[i].scf
|
|
<< (24 + SCNTL3_SCF_SHIFT);
|
|
if (sync < 25) /* Ultra */
|
|
sc->targets[target]->id |=
|
|
SCNTL3_ULTRA << 24;
|
|
else
|
|
sc->targets[target]->id &=
|
|
~(SCNTL3_ULTRA << 24);
|
|
sc->targets[target]->id &=
|
|
~(SCXFER_MO_MASK << 8);
|
|
sc->targets[target]->id |=
|
|
(offset & SCXFER_MO_MASK) << 8;
|
|
siop_cmd->siop_table->msg_out[0] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[1] =
|
|
MSG_EXT_SDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_SDTR;
|
|
siop_cmd->siop_table->msg_out[3] = sync;
|
|
siop_cmd->siop_table->msg_out[4] = offset;
|
|
siop_cmd->siop_table->t_msgout.count=
|
|
htole32(MSG_EXT_SDTR_LEN + 2);
|
|
send_msgout = 1;
|
|
goto end;
|
|
}
|
|
}
|
|
async:
|
|
printf("%s: target %d asynchronous\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
sc->targets[target]->id &= ~(SCNTL3_SCF_MASK << 24);
|
|
sc->targets[target]->id &= ~(SCNTL3_ULTRA << 24);
|
|
sc->targets[target]->id &= ~(SCXFER_MO_MASK << 8);
|
|
siop_cmd->siop_table->msg_out[0] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[1] = MSG_EXT_SDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_SDTR;
|
|
siop_cmd->siop_table->msg_out[3] = 0;
|
|
siop_cmd->siop_table->msg_out[4] = 0;
|
|
siop_cmd->siop_table->t_msgout.count=
|
|
htole32(MSG_EXT_SDTR_LEN + 2);
|
|
send_msgout = 1;
|
|
}
|
|
end:
|
|
#ifdef DEBUG
|
|
printf("id now 0x%x\n", sc->targets[target]->id);
|
|
#endif
|
|
siop_cmd->siop_table->id = htole32(sc->targets[target]->id);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL3,
|
|
(sc->targets[target]->id >> 24) & 0xff);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCXFER,
|
|
(sc->targets[target]->id >> 8) & 0xff);
|
|
if (send_msgout) {
|
|
siop_cmd->siop_table->t_msgout.addr = htole32(siop_cmd->dsa);
|
|
siop_table_sync(siop_cmd,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
CALL_SCRIPT(Ent_send_msgout);
|
|
} else {
|
|
CALL_SCRIPT(Ent_msgin_ack);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* handle a bus reset: reset chip, unqueue all active commands and report
|
|
* loosage to upper layer.
|
|
* As the upper layer may requeue immediatly we have to first store
|
|
* all active commands in a temporary queue.
|
|
*/
|
|
void
|
|
siop_handle_reset(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
struct cmd_list reset_list;
|
|
struct siop_cmd *siop_cmd, *next_siop_cmd;
|
|
int target, lun;
|
|
/*
|
|
* scsi bus reset. reset the chip and restart
|
|
* the queue. Need to clean up all active commands
|
|
*/
|
|
printf("%s: scsi bus reset\n", sc->sc_dev.dv_xname);
|
|
/* stop, reset and restart the chip */
|
|
siop_reset(sc);
|
|
TAILQ_INIT(&reset_list);
|
|
/* find all active commands */
|
|
for (target = 0; target < sc->sc_link.scsipi_scsi.max_target;
|
|
target++) {
|
|
if (sc->targets[target] == NULL)
|
|
continue;
|
|
for (lun = 0; lun < 8; lun++) {
|
|
for (siop_cmd =
|
|
TAILQ_FIRST(&sc->targets[target]->active_list[lun]);
|
|
siop_cmd != NULL; siop_cmd = next_siop_cmd) {
|
|
next_siop_cmd = TAILQ_NEXT(siop_cmd, next);
|
|
if (siop_cmd->status < CMDST_ACTIVE)
|
|
continue;
|
|
printf("cmd %p (target %d) in reset list\n",
|
|
siop_cmd, target);
|
|
TAILQ_REMOVE(
|
|
&sc->targets[target]->active_list[lun],
|
|
siop_cmd, next);
|
|
TAILQ_INSERT_TAIL(&reset_list, siop_cmd, next);
|
|
}
|
|
}
|
|
sc->targets[target]->status = TARST_ASYNC;
|
|
sc->targets[target]->flags = ~(TARF_SYNC | TARF_WIDE);
|
|
}
|
|
for (siop_cmd = TAILQ_FIRST(&reset_list); siop_cmd != NULL;
|
|
siop_cmd = next_siop_cmd) {
|
|
next_siop_cmd = TAILQ_NEXT(siop_cmd, next);
|
|
siop_cmd->xs->error = (siop_cmd->flags & CMDFL_TIMEOUT) ?
|
|
XS_TIMEOUT : XS_RESET;
|
|
printf("cmd %p about to be processed\n", siop_cmd);
|
|
TAILQ_REMOVE(&reset_list, siop_cmd, next);
|
|
siop_scsicmd_end(siop_cmd);
|
|
TAILQ_INSERT_TAIL(&sc->free_list, siop_cmd, next);
|
|
}
|
|
}
|
|
|
|
void
|
|
siop_minphys(bp)
|
|
struct buf *bp;
|
|
{
|
|
minphys(bp);
|
|
}
|
|
|
|
int
|
|
siop_ioctl(link, cmd, arg, flag, p)
|
|
struct scsipi_link *link;
|
|
u_long cmd;
|
|
caddr_t arg;
|
|
int flag;
|
|
struct proc *p;
|
|
{
|
|
struct siop_softc *sc = link->adapter_softc;
|
|
u_int8_t scntl1;
|
|
int s;
|
|
|
|
switch (cmd) {
|
|
case SCBUSIORESET:
|
|
s = splbio();
|
|
scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1,
|
|
scntl1 | SCNTL1_RST);
|
|
/* minimum 25 us, more time won't hurt */
|
|
delay(100);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1);
|
|
splx(s);
|
|
return (0);
|
|
default:
|
|
return (ENOTTY);
|
|
}
|
|
}
|
|
|
|
int
|
|
siop_scsicmd(xs)
|
|
struct scsipi_xfer *xs;
|
|
{
|
|
struct siop_softc *sc = (struct siop_softc *)xs->sc_link->adapter_softc;
|
|
struct siop_cmd *siop_cmd;
|
|
int s, error, i;
|
|
int target = xs->sc_link->scsipi_scsi.target;
|
|
int lun = xs->sc_link->scsipi_scsi.lun;
|
|
|
|
s = splbio();
|
|
#ifdef DEBUG_SHED
|
|
printf("starting cmd for %d:%d\n", target, lun);
|
|
#endif
|
|
siop_cmd = sc->free_list.tqh_first;
|
|
if (siop_cmd) {
|
|
TAILQ_REMOVE(&sc->free_list, siop_cmd, next);
|
|
}
|
|
splx(s);
|
|
if (siop_cmd == NULL) {
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
return(TRY_AGAIN_LATER);
|
|
}
|
|
#ifdef DIAGNOSTIC
|
|
if (siop_cmd->status != CMDST_FREE)
|
|
panic("siop_scsicmd: new cmd not free");
|
|
#endif
|
|
if (sc->targets[target] == NULL) {
|
|
sc->targets[target] =
|
|
malloc(sizeof(struct siop_target), M_DEVBUF, M_NOWAIT);
|
|
if (sc->targets[target] == NULL) {
|
|
printf("%s: can't malloc memory for target %d\n",
|
|
sc->sc_dev.dv_xname, target);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
return(TRY_AGAIN_LATER);
|
|
}
|
|
sc->targets[target]->siop_sc = sc;
|
|
sc->targets[target]->status = TARST_PROBING;
|
|
sc->targets[target]->flags = 0;
|
|
sc->targets[target]->id = sc->clock_div << 24; /* scntl3 */
|
|
sc->targets[target]->id |= target << 16; /* id */
|
|
sc->targets[target]->id |= 0x80 << 8; /* scxfer */
|
|
for (i = 0; i < 8; i++)
|
|
TAILQ_INIT(&sc->targets[target]->active_list[i]);
|
|
}
|
|
siop_cmd->siop_target = sc->targets[target];
|
|
siop_cmd->xs = xs;
|
|
siop_cmd->siop_table->id = htole32(sc->targets[target]->id);
|
|
siop_cmd->siop_table->t_msgout.count= htole32(1);
|
|
siop_cmd->siop_table->t_msgout.addr = htole32(siop_cmd->dsa);
|
|
memset(siop_cmd->siop_table->msg_out, 0, 8);
|
|
siop_cmd->siop_table->msg_out[0] = MSG_IDENTIFY(lun, 1);
|
|
if (sc->targets[target]->status == TARST_ASYNC) {
|
|
if (sc->features & SF_BUS_WIDE) {
|
|
sc->targets[target]->status = TARST_WIDE_NEG;
|
|
siop_cmd->siop_table->msg_out[1] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_WDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[3] = MSG_EXT_WDTR;
|
|
siop_cmd->siop_table->msg_out[4] =
|
|
MSG_EXT_WDTR_BUS_16_BIT;
|
|
siop_cmd->siop_table->t_msgout.count=
|
|
htole32(MSG_EXT_WDTR_LEN + 2 + 1);
|
|
} else {
|
|
sc->targets[target]->status = TARST_SYNC_NEG;
|
|
siop_cmd->siop_table->msg_out[1] = MSG_EXTENDED;
|
|
siop_cmd->siop_table->msg_out[2] = MSG_EXT_SDTR_LEN;
|
|
siop_cmd->siop_table->msg_out[3] = MSG_EXT_SDTR;
|
|
siop_cmd->siop_table->msg_out[4] = sc->minsync;
|
|
siop_cmd->siop_table->msg_out[5] = sc->maxoff;
|
|
siop_cmd->siop_table->t_msgout.count=
|
|
htole32(MSG_EXT_SDTR_LEN + 2 +1);
|
|
}
|
|
}
|
|
siop_cmd->siop_table->status = htole32(0xff); /* set invalid status */
|
|
|
|
/* load the DMA maps */
|
|
error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_cmd,
|
|
xs->cmd, xs->cmdlen, NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load cmd DMA map: %d",
|
|
sc->sc_dev.dv_xname, error);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
return(TRY_AGAIN_LATER);
|
|
}
|
|
siop_cmd->siop_table->cmd.count =
|
|
htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_len);
|
|
siop_cmd->siop_table->cmd.addr =
|
|
htole32(siop_cmd->dmamap_cmd->dm_segs[0].ds_addr);
|
|
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
|
|
error = bus_dmamap_load(sc->sc_dmat, siop_cmd->dmamap_data,
|
|
xs->data, xs->datalen, NULL, BUS_DMA_NOWAIT);
|
|
if (error) {
|
|
printf("%s: unable to load cmd DMA map: %d",
|
|
sc->sc_dev.dv_xname, error);
|
|
xs->error = XS_DRIVER_STUFFUP;
|
|
return(TRY_AGAIN_LATER);
|
|
bus_dmamap_unload(sc->sc_dmat, siop_cmd->dmamap_cmd);
|
|
}
|
|
for (i = 0; i < siop_cmd->dmamap_data->dm_nsegs; i++) {
|
|
siop_cmd->siop_table->data[i].count =
|
|
htole32(siop_cmd->dmamap_data->dm_segs[i].ds_len);
|
|
siop_cmd->siop_table->data[i].addr =
|
|
htole32(siop_cmd->dmamap_data->dm_segs[i].ds_addr);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_data, 0,
|
|
siop_cmd->dmamap_data->dm_mapsize,
|
|
(xs->xs_control & XS_CTL_DATA_IN) ?
|
|
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
|
|
}
|
|
bus_dmamap_sync(sc->sc_dmat, siop_cmd->dmamap_cmd, 0,
|
|
siop_cmd->dmamap_cmd->dm_mapsize, BUS_DMASYNC_PREWRITE);
|
|
siop_table_sync(siop_cmd, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
siop_cmd->status = CMDST_READY;
|
|
s = splbio();
|
|
TAILQ_INSERT_TAIL(&sc->targets[target]->active_list[lun],
|
|
siop_cmd, next);
|
|
siop_start(sc);
|
|
splx(s);
|
|
return (SUCCESSFULLY_QUEUED);
|
|
}
|
|
|
|
void
|
|
siop_start(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
struct siop_cmd *siop_cmd;
|
|
u_int32_t *scr;
|
|
u_int32_t dsa;
|
|
int timeout;
|
|
int target, lun, slot;
|
|
int newcmd = 0;
|
|
|
|
/*
|
|
* first make sure to read valid data
|
|
*/
|
|
siop_script_sync(sc, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
/*
|
|
* The queue management here is a bit tricky: the script always looks
|
|
* at the slot from first to last, so if we always use the first
|
|
* free slot commands can stay at the tail of the queue ~forever.
|
|
* The algorithm used here is to restart from the head when we know
|
|
* that the queue is empty, and only add commands after the last one.
|
|
* When we're at the end of the queue wait for the script to clear it.
|
|
* The best thing to do here would be to implement a circular queue,
|
|
* but using only 53c720 features this can be "interesting".
|
|
* A mid-way solution could be to implement 2 queues and swap orders.
|
|
*/
|
|
slot = sc->sc_currshedslot;
|
|
scr = &sc->sc_script[Ent_sheduler / 4 +
|
|
(Ent_nextslot / 4) * slot];
|
|
/*
|
|
* if relative addr of first jump is not 0 the slot is free. As this is
|
|
* the last used slot, all previous slots are free, we can restart
|
|
* from 0.
|
|
*/
|
|
if (scr[Ent_slot / 4 + 1] != 0) {
|
|
slot = sc->sc_currshedslot = 0;
|
|
} else {
|
|
slot++;
|
|
}
|
|
|
|
for (target = 0; target <= sc->sc_link.scsipi_scsi.max_target;
|
|
target++) {
|
|
if (sc->targets[target] == NULL)
|
|
continue;
|
|
for (lun = 0; lun < 8; lun++) {
|
|
siop_cmd =
|
|
sc->targets[target]->active_list[lun].tqh_first;
|
|
if (siop_cmd == NULL)
|
|
continue;
|
|
if (siop_cmd->status != CMDST_READY &&
|
|
siop_cmd->status != CMDST_SENSE)
|
|
continue;
|
|
/* find a free sheduler slot and load it */
|
|
for (; slot < sc->sc_nshedslots; slot++) {
|
|
scr = &sc->sc_script[Ent_sheduler / 4 +
|
|
(Ent_nextslot / 4) * slot];
|
|
/*
|
|
* if relative addr of first jump is 0 the
|
|
* slot isn't free
|
|
*/
|
|
if (scr[Ent_slot / 4 + 1] == 0)
|
|
continue;
|
|
#ifdef DEBUG_SHED
|
|
printf("using slot %d for DSA 0x%lx\n", slot,
|
|
(u_long)siop_cmd->dsa);
|
|
#endif
|
|
/* note that we started a new command */
|
|
newcmd = 1;
|
|
/* mark command as active */
|
|
if (siop_cmd->status == CMDST_READY)
|
|
siop_cmd->status = CMDST_ACTIVE;
|
|
else if (siop_cmd->status == CMDST_SENSE)
|
|
siop_cmd->status = CMDST_SENSE_ACTIVE;
|
|
else
|
|
panic("siop_start: bad status");
|
|
/* patch script with DSA addr */
|
|
dsa = siop_cmd->dsa;
|
|
/*
|
|
* 0x78000000 is a 'move data8 to reg'. data8
|
|
* is the second octet, reg offset is the third.
|
|
*/
|
|
scr[Ent_idsa0 / 4] =
|
|
htole32(0x78100000 |
|
|
((dsa & 0x000000ff) << 8));
|
|
scr[Ent_idsa1 / 4] =
|
|
htole32(0x78110000 |
|
|
( dsa & 0x0000ff00 ));
|
|
scr[Ent_idsa2 / 4] =
|
|
htole32(0x78120000 |
|
|
((dsa & 0x00ff0000) >> 8));
|
|
scr[Ent_idsa3 / 4] =
|
|
htole32(0x78130000 |
|
|
((dsa & 0xff000000) >> 16));
|
|
/* handle timeout */
|
|
if (siop_cmd->status == CMDST_ACTIVE) {
|
|
if ((siop_cmd->xs->xs_control &
|
|
XS_CTL_POLL) == 0) {
|
|
/* start exire timer */
|
|
timeout =
|
|
siop_cmd->xs->timeout *
|
|
hz / 1000;
|
|
if (timeout == 0)
|
|
timeout = 1;
|
|
callout_reset(
|
|
&siop_cmd->xs->xs_callout,
|
|
timeout, siop_timeout,
|
|
siop_cmd);
|
|
}
|
|
}
|
|
/*
|
|
* Change jump offset so that this slot will be
|
|
* handled
|
|
*/
|
|
scr[Ent_slot / 4 + 1] = 0;
|
|
break;
|
|
}
|
|
/* no more free slot, no need to continue */
|
|
if (slot == sc->sc_nshedslots) {
|
|
goto end;
|
|
}
|
|
sc->sc_currshedslot = slot;
|
|
}
|
|
}
|
|
end:
|
|
/* if nothing changed no need to flush cache and wakeup script */
|
|
if (newcmd == 0)
|
|
return;
|
|
/* make sure SCRIPT processor will read valid data */
|
|
siop_script_sync(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/* Signal script it has some work to do */
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_ISTAT, ISTAT_SIGP);
|
|
/* and wait for IRQ */
|
|
return;
|
|
}
|
|
|
|
void
|
|
siop_timeout(v)
|
|
void *v;
|
|
{
|
|
struct siop_cmd *siop_cmd = v;
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
int s;
|
|
u_int8_t scntl1;
|
|
|
|
scsi_print_addr(siop_cmd->xs->sc_link);
|
|
printf("command timeout\n");
|
|
|
|
s = splbio();
|
|
/* reset the scsi bus */
|
|
scntl1 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1,
|
|
scntl1 | SCNTL1_RST);
|
|
/* minimum 25 us, more time won't hurt */
|
|
delay(100);
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_SCNTL1, scntl1);
|
|
|
|
/* desactivate callout */
|
|
callout_stop(&siop_cmd->xs->xs_callout);
|
|
/* mark command has being timed out; siop_intr will handle it */
|
|
/*
|
|
* mark command has being timed out and just return;
|
|
* the bus reset will generate an interrupt,
|
|
* it will be handled in siop_intr()
|
|
*/
|
|
siop_cmd->flags |= CMDFL_TIMEOUT;
|
|
splx(s);
|
|
return;
|
|
|
|
}
|
|
|
|
void
|
|
siop_sdp(siop_cmd)
|
|
struct siop_cmd *siop_cmd;
|
|
{
|
|
/* save data pointer. Handle async only for now */
|
|
int offset, dbc, sstat;
|
|
struct siop_softc *sc = siop_cmd->siop_target->siop_sc;
|
|
scr_table_t *table; /* table to patch */
|
|
|
|
if ((siop_cmd->xs->xs_control & (XS_CTL_DATA_OUT | XS_CTL_DATA_IN))
|
|
== 0)
|
|
return; /* no data pointers to save */
|
|
offset = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SCRATCHA + 1);
|
|
if (offset >= SIOP_NSG) {
|
|
printf("%s: bad offset in siop_sdp (%d)\n",
|
|
sc->sc_dev.dv_xname, offset);
|
|
return;
|
|
}
|
|
table = &siop_cmd->siop_table->data[offset];
|
|
#ifdef DEBUG_DR
|
|
printf("sdp: offset %d count=%d addr=0x%x ", offset,
|
|
table->count, table->addr);
|
|
#endif
|
|
dbc = bus_space_read_4(sc->sc_rt, sc->sc_rh, SIOP_DBC) & 0x00ffffff;
|
|
if (siop_cmd->xs->xs_control & XS_CTL_DATA_OUT) {
|
|
/* need to account stale data in FIFO */
|
|
/* XXX check for large fifo */
|
|
dbc += (bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_DFIFO) -
|
|
(dbc & 0x7f)) & 0x7f;
|
|
sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_SSTAT0);
|
|
if (sstat & SSTAT0_OLF)
|
|
dbc++;
|
|
if (sstat & SSTAT0_ORF)
|
|
dbc++;
|
|
if (siop_cmd->siop_target->flags & TARF_WIDE) {
|
|
sstat = bus_space_read_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_SSTAT2);
|
|
if (sstat & SSTAT2_OLF1)
|
|
dbc++;
|
|
if (sstat & SSTAT2_ORF1)
|
|
dbc++;
|
|
}
|
|
/* clear the FIFO */
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
|
|
bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) |
|
|
CTEST3_CLF);
|
|
}
|
|
table->addr =
|
|
htole32(le32toh(table->addr) + le32toh(table->count) - dbc);
|
|
table->count = htole32(dbc);
|
|
#ifdef DEBUG_DR
|
|
printf("now count=%d addr=0x%x\n", table->count, table->addr);
|
|
#endif
|
|
}
|
|
|
|
void
|
|
siop_clearfifo(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
int timeout = 0;
|
|
int ctest3 = bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3);
|
|
|
|
#ifdef DEBUG_INTR
|
|
printf("DMA fifo not empty !\n");
|
|
#endif
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
|
|
ctest3 | CTEST3_CLF);
|
|
while ((bus_space_read_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3) &
|
|
CTEST3_CLF) != 0) {
|
|
delay(1);
|
|
if (++timeout > 1000) {
|
|
printf("clear fifo failed\n");
|
|
bus_space_write_1(sc->sc_rt, sc->sc_rh, SIOP_CTEST3,
|
|
bus_space_read_1(sc->sc_rt, sc->sc_rh,
|
|
SIOP_CTEST3) & ~CTEST3_CLF);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
siop_dump_script(sc)
|
|
struct siop_softc *sc;
|
|
{
|
|
int i;
|
|
siop_script_sync(sc, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
for (i = 0; i < CMD_OFF / 4; i += 2) {
|
|
printf("0x%04x: 0x%08x 0x%08x", i * 4,
|
|
le32toh(sc->sc_script[i]), le32toh(sc->sc_script[i+1]));
|
|
if ((le32toh(sc->sc_script[i]) & 0xe0000000) == 0xc0000000) {
|
|
i++;
|
|
printf(" 0x%08x", le32toh(sc->sc_script[i+1]));
|
|
}
|
|
printf("\n");
|
|
}
|
|
}
|
|
|
|
#ifdef SIOP_STATS
|
|
void
|
|
siop_printstats()
|
|
{
|
|
printf("siop_stat_intr %d\n", siop_stat_intr);
|
|
printf("siop_stat_intr_shortxfer %d\n", siop_stat_intr_shortxfer);
|
|
printf("siop_stat_intr_xferdisc %d\n", siop_stat_intr_xferdisc);
|
|
printf("siop_stat_intr_sdp %d\n", siop_stat_intr_sdp);
|
|
printf("siop_stat_intr_reselect %d\n", siop_stat_intr_reselect);
|
|
printf("siop_stat_intr_done %d\n", siop_stat_intr_done);
|
|
}
|
|
#endif
|