NetBSD/sys/dev/ic/mlxreg.h

536 lines
16 KiB
C

/* $NetBSD: mlxreg.h,v 1.2 2001/05/06 19:53:04 ad Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Andrew Doran.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1999 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from FreeBSD: mlxreg.h,v 1.5.2.2 2000/04/24 19:40:50 msmith Exp
*/
#ifndef _IC_MLXREG_H_
#define _IC_MLXREG_H_
#define MLX_SECTOR_SIZE 512
/*
* Selected command codes.
*/
#define MLX_CMD_ENQUIRY_OLD 0x05
#define MLX_CMD_ENQUIRY 0x53
#define MLX_CMD_ENQUIRY2 0x1c
#define MLX_CMD_ENQSYSDRIVE 0x19
#define MLX_CMD_READSG 0xb6
#define MLX_CMD_WRITESG 0xb7
#define MLX_CMD_READSG_OLD 0x82
#define MLX_CMD_WRITESG_OLD 0x83
#define MLX_CMD_FLUSH 0x0a
#define MLX_CMD_LOGOP 0x72
#define MLX_CMD_REBUILDASYNC 0x16
#define MLX_CMD_CHECKASYNC 0x1e
#define MLX_CMD_REBUILDSTAT 0x0c
#define MLX_CMD_STOPCHANNEL 0x13
#define MLX_CMD_STARTCHANNEL 0x12
#define MLX_CMD_READ_CONFIG 0x4e
#define MLX_CMD_WRITE_CONFIG 0x4f
#define MLX_CMD_READ_DK_CONFIG 0x4a
#define MLX_CMD_WRITE_DK_CONFIG 0x4b
#define MLX_CMD_DIRECT_CDB 0x04
#define MLX_CMD_DEVICE_STATE 0x50
#define MLX_CMD_READ_CONFIG2 0x3d
#define MLX_CMD_WRITE_CONFIG2 0x3c
#ifdef _KERNEL
/*
* Status values.
*/
#define MLX_STATUS_OK 0x0000
#define MLX_STATUS_RDWROFFLINE 0x0002 /* read/write claims drive is offline */
#define MLX_STATUS_WEDGED 0xdeaf /* controller not listening */
#define MLX_STATUS_LOST 0xdead /* never came back */
#define MLX_STATUS_BUSY 0xdeed /* command is in controller */
/*
* V1 (EISA) interface.
*/
#define MLX_V1REG_IE 0x09
#define MLX_V1REG_IDB 0x0d
#define MLX_V1REG_ODB_EN 0x0e
#define MLX_V1REG_ODB 0x0f
#define MLX_V1REG_MAILBOX 0x10
#define MLX_V1_IDB_FULL 0x01 /* mailbox is full */
#define MLX_V1_IDB_INIT_BUSY 0x02 /* init in progress */
#define MLX_V1_IDB_SACK 0x02 /* acknowledge status read */
#define MLX_V1_IDB_RESET 0x10 /* reset controller */
#define MLX_V1_ODB_SAVAIL 0x01 /* status is available */
#define MLX_V1_ODB_RESET 0x02 /* reset controller */
#define MLX_V1_FWERROR_PEND 0x04 /* firmware error pending */
#define MLX_V1_MAILBOX_LEN 13
/*
* V2/V3 interface.
*/
#define MLX_V3REG_MAILBOX 0x00
#define MLX_V3REG_STATUS_IDENT 0x0d
#define MLX_V3REG_STATUS 0x0e
#define MLX_V3REG_IDB 0x40
#define MLX_V3REG_ODB 0x41
#define MLX_V3REG_IE 0x43
#define MLX_V3REG_FWERROR 0x3f
#define MLX_V3REG_FWERROR_PARAM1 0x00
#define MLX_V3REG_FWERROR_PARAM2 0x01
#define MLX_V3_IDB_FULL 0x01 /* mailbox is full */
#define MLX_V3_IDB_INIT_BUSY 0x02 /* init in progress */
#define MLX_V3_IDB_SACK 0x02 /* acknowledge status read */
#define MLX_V3_IDB_RESET 0x08 /* reset controller */
#define MLX_V3_ODB_SAVAIL 0x01 /* status is available */
#define MLX_V3_FWERROR_PEND 0x04 /* firmware error pending */
#define MLX_V3_MAILBOX_LEN 13
/*
* V4 interface.
*/
#define MLX_V4REG_MAILBOX 0x1000
#define MLX_V4REG_STATUS_IDENT 0x1018
#define MLX_V4REG_STATUS 0x101a
#define MLX_V4REG_IDB 0x0020
#define MLX_V4REG_ODB 0x002c
#define MLX_V4REG_IE 0x0034
#define MLX_V4REG_FWERROR 0x103f
#define MLX_V4REG_FWERROR_PARAM1 0x1000
#define MLX_V4REG_FWERROR_PARAM2 0x1001
#define MLX_V4_IDB_FULL 0x01 /* mailbox is full */
#define MLX_V4_IDB_INIT_BUSY 0x02 /* initialisation in progress */
#define MLX_V4_IDB_HWMBOX_CMD 0x01 /* posted hardware mailbox command */
#define MLX_V4_IDB_SACK 0x02 /* acknowledge status read */
#define MLX_V4_IDB_MEMMBOX_CMD 0x10 /* posted memory mailbox command */
#define MLX_V4_ODB_HWSAVAIL 0x01 /* status available for hardware m/b */
#define MLX_V4_ODB_MEMSAVAIL 0x02 /* status available for memory m/b */
#define MLX_V4_ODB_HWMBOX_ACK 0x01 /* ack status read from hardware m/b */
#define MLX_V4_ODB_MEMMBOX_ACK 0x02 /* ack status read from memory m/b */
#define MLX_V4_IE_MASK 0xfb /* message unit interrupt mask */
#define MLX_V4_IE_DISINT 0x04 /* interrupt disable bit */
#define MLX_V4_FWERROR_PEND 0x04 /* firmware error pending */
#define MLX_V4_MAILBOX_LEN 16
/*
* V5 interface.
*/
#define MLX_V5REG_MAILBOX 0x50
#define MLX_V5REG_STATUS_IDENT 0x5d
#define MLX_V5REG_STATUS 0x5e
#define MLX_V5REG_IDB 0x60
#define MLX_V5REG_ODB 0x61
#define MLX_V5REG_IE 0x34
#define MLX_V5REG_FWERROR 0x63
#define MLX_V5REG_FWERROR_PARAM1 0x50
#define MLX_V5REG_FWERROR_PARAM2 0x51
#define MLX_V5_IDB_EMPTY 0x01 /* mailbox is empty */
#define MLX_V5_IDB_INIT_DONE 0x02 /* initialisation has completed */
#define MLX_V5_IDB_HWMBOX_CMD 0x01 /* posted hardware mailbox command */
#define MLX_V5_IDB_SACK 0x02 /* acknowledge status read */
#define MLX_V5_IDB_RESET 0x08 /* reset request */
#define MLX_V5_IDB_MEMMBOX_CMD 0x10 /* posted memory mailbox command */
#define MLX_V5_ODB_HWSAVAIL 0x01 /* status available for hardware m/b */
#define MLX_V5_ODB_MEMSAVAIL 0x02 /* status available for memory m/b */
#define MLX_V5_ODB_HWMBOX_ACK 0x01 /* ack status read from hardware m/b */
#define MLX_V5_ODB_MEMMBOX_ACK 0x02 /* ack status read from memory m/b */
#define MLX_V5_IE_DISINT 0x04 /* interrupt disable bit */
#define MLX_V5_FWERROR_PEND 0x04 /* firmware error pending */
#define MLX_V5_MAILBOX_LEN 16
#endif /* _KERNEL */
/*
* Scatter-gather list format, type 1, kind 00.
*/
struct mlx_sgentry {
u_int32_t sge_addr;
u_int32_t sge_count;
} __attribute__ ((packed));
/*
* Command result buffers, as placed in system memory by the controller.
*/
struct mlx_enquiry_old {
u_int8_t me_num_sys_drvs;
u_int8_t me_res1[3];
u_int32_t me_drvsize[8];
u_int16_t me_flash_age;
u_int8_t me_status_flags;
u_int8_t me_free_state_change_count;
u_int8_t me_fwminor;
u_int8_t me_fwmajor;
u_int8_t me_rebuild_flag;
u_int8_t me_max_commands;
u_int8_t me_offline_sd_count;
u_int8_t me_res3;
u_int8_t me_critical_sd_count;
u_int8_t me_res4[3];
u_int8_t me_dead_count;
u_int8_t me_res5;
u_int8_t me_rebuild_count;
u_int8_t me_misc_flags;
struct {
u_int8_t dd_targ;
u_int8_t dd_chan;
} __attribute__ ((packed)) me_dead[20];
} __attribute__ ((packed));
struct mlx_enquiry {
u_int8_t me_num_sys_drvs;
u_int8_t me_res1[3];
u_int32_t me_drvsize[32];
u_int16_t me_flash_age;
u_int8_t me_status_flags;
#define MLX_ENQ_SFLAG_DEFWRERR 0x01 /* deferred write error indicator */
#define MLX_ENQ_SFLAG_BATTLOW 0x02 /* battery low */
u_int8_t me_res2;
u_int8_t me_fwminor;
u_int8_t me_fwmajor;
u_int8_t me_rebuild_flag;
u_int8_t me_max_commands;
u_int8_t me_offline_sd_count;
u_int8_t me_res3;
u_int16_t me_event_log_seq_num;
u_int8_t me_critical_sd_count;
u_int8_t me_res4[3];
u_int8_t me_dead_count;
u_int8_t me_res5;
u_int8_t me_rebuild_count;
u_int8_t me_misc_flags;
#define MLX_ENQ_MISC_BBU 0x08 /* battery backup present */
struct {
u_int8_t dd_targ;
u_int8_t dd_chan;
} __attribute__ ((packed)) me_dead[20];
} __attribute__ ((packed));
struct mlx_enquiry2 {
u_int8_t me_hardware_id[4];
u_int8_t me_firmware_id[4];
u_int32_t me_res1;
u_int8_t me_configured_channels;
u_int8_t me_actual_channels;
u_int8_t me_max_targets;
u_int8_t me_max_tags;
u_int8_t me_max_sys_drives;
u_int8_t me_max_arms;
u_int8_t me_max_spans;
u_int8_t me_res2;
u_int32_t me_res3;
u_int32_t me_mem_size;
u_int32_t me_cache_size;
u_int32_t me_flash_size;
u_int32_t me_nvram_size;
u_int16_t me_mem_type;
u_int16_t me_clock_speed;
u_int16_t me_mem_speed;
u_int16_t me_hardware_speed;
u_int8_t me_res4[12];
u_int16_t me_max_commands;
u_int16_t me_max_sg;
u_int16_t me_max_dp;
u_int16_t me_max_iod;
u_int16_t me_max_comb;
u_int8_t me_latency;
u_int8_t me_res5;
u_int8_t me_scsi_timeout;
u_int8_t me_res6;
u_int16_t me_min_freelines;
u_int8_t me_res7[8];
u_int8_t me_rate_const;
u_int8_t me_res8[11];
u_int16_t me_physblk;
u_int16_t me_logblk;
u_int16_t me_maxblk;
u_int16_t me_blocking_factor;
u_int16_t me_cacheline;
u_int8_t me_scsi_cap;
u_int8_t me_res9[5];
u_int16_t me_firmware_build;
u_int8_t me_fault_mgmt_type;
u_int8_t me_res10;
u_int32_t me_firmware_features;
u_int8_t me_res11[8];
} __attribute__ ((packed));
/* MLX_CMD_ENQSYSDRIVE returns an array of 32 of these. */
struct mlx_enq_sys_drive {
u_int32_t sd_size;
u_int8_t sd_state;
u_int8_t sd_raidlevel;
u_int16_t sd_res1;
} __attribute__ ((packed));
/*
* MLX_CMD_LOGOP/MLX_LOGOP_GET
*
* Bitfields:
*
* 0-4 el_target SCSI target
* 5-7 el_target SCSI channel
* 0-6 el_errorcode error code
* 7-7 el_errorcode validity (?)
* 0-3 el_sense sense key
* 4-4 el_sense reserved
* 5-5 el_sense ILI
* 6-6 el_sense EOM
* 7-7 el_sense filemark
*/
struct mlx_eventlog_entry {
u_int8_t el_type;
u_int8_t el_length;
u_int8_t el_target;
u_int8_t el_lun;
u_int16_t el_seqno;
u_int8_t el_errorcode;
u_int8_t el_segment;
u_int8_t el_sense;
u_int8_t el_information[4];
u_int8_t el_addsense;
u_int8_t el_csi[4];
u_int8_t el_asc;
u_int8_t el_asq;
u_int8_t el_res3[12];
} __attribute__ ((packed));
#define MLX_LOGOP_GET 0x00 /* operation codes for MLX_CMD_LOGOP */
#define MLX_LOGMSG_SENSE 0x00 /* log message contents codes */
struct mlx_rebuild_stat {
u_int32_t rb_drive;
u_int32_t rb_size;
u_int32_t rb_remaining;
} __attribute__ ((packed));
struct mlx_config {
u_int16_t cf_flags1;
#define MLX_CF2_ACTV_NEG 0x0002
#define MLX_CF2_NORSTRTRY 0x0080
#define MLX_CF2_STRGWRK 0x0100
#define MLX_CF2_HPSUPP 0x0200
#define MLX_CF2_NODISCN 0x0400
#define MLX_CF2_ARM 0x2000
#define MLX_CF2_OFM 0x8000
#define MLX_CF2_AEMI (MLX_CF2_ARM | MLX_CF2_OFM)
u_int8_t cf_oemid;
u_int8_t cf_oem_model;
u_int8_t cf_physical_sector;
u_int8_t cf_logical_sector;
u_int8_t cf_blockfactor;
u_int8_t cf_flags2;
#define MLX_CF2_READAH 0x01
#define MLX_CF2_BIOSDLY 0x02
#define MLX_CF2_REASS1S 0x10
#define MLX_CF2_FUAENABL 0x40
#define MLX_CF2_R5ALLS 0x80
u_int8_t cf_rcrate;
u_int8_t cf_res1;
u_int8_t cf_blocks_per_cache_line;
u_int8_t cf_blocks_per_stripe;
u_int8_t cf_scsi_param_0;
u_int8_t cf_scsi_param_1;
u_int8_t cf_scsi_param_2;
u_int8_t cf_scsi_param_3;
u_int8_t cf_scsi_param_4;
u_int8_t cf_scsi_param_5;
u_int8_t cf_scsi_initiator_id;
u_int8_t cf_res2;
u_int8_t cf_startup_mode;
u_int8_t cf_simultaneous_spinup_devices;
u_int8_t cf_delay_between_spinups;
u_int8_t cf_res3;
u_int16_t cf_checksum;
} __attribute__ ((packed));
struct mlx_config2 {
struct mlx_config cf2_cf;
u_int8_t cf2_reserved0[26];
u_int8_t cf2_flags;
#define MLX_CF2_BIOS_DIS 0x01
#define MLX_CF2_CDROM_DIS 0x02
#define MLX_CF2_GEOM_255 0x20
u_int8_t cf2_reserved1[9];
u_int16_t cf2_checksum;
} __attribute__ ((__packed__));
struct mlx_sys_drv_span {
u_int32_t sp_start_lba;
u_int32_t sp_nblks;
u_int8_t sp_arm[8];
} __attribute__ ((packed));
struct mlx_sys_drv {
u_int8_t sd_status;
u_int8_t sd_ext_status;
u_int8_t sd_mod1;
u_int8_t sd_mod2;
u_int8_t sd_raidlevel;
#define MLX_SYS_DRV_WRITEBACK (1<<7)
#define MLX_SYS_DRV_RAID0 0
#define MLX_SYS_DRV_RAID1 1
#define MLX_SYS_DRV_RAID3 3
#define MLX_SYS_DRV_RAID5 5
#define MLX_SYS_DRV_RAID6 6
#define MLX_SYS_DRV_JBOD 7
u_int8_t sd_valid_arms;
u_int8_t sd_valid_spans;
u_int8_t sd_init_state;
#define MLX_SYS_DRV_INITTED 0x81;
struct mlx_sys_drv_span sd_span[4];
} __attribute__ ((packed));
struct mlx_phys_drv {
u_int8_t pd_flags1;
#define MLX_PHYS_DRV_PRESENT 0x01
u_int8_t pd_flags2;
#define MLX_PHYS_DRV_OTHER 0x00
#define MLX_PHYS_DRV_DISK 0x01
#define MLX_PHYS_DRV_SEQUENTIAL 0x02
#define MLX_PHYS_DRV_CDROM 0x03
#define MLX_PHYS_DRV_FAST20 0x08
#define MLX_PHYS_DRV_SYNC 0x10
#define MLX_PHYS_DRV_FAST 0x20
#define MLX_PHYS_DRV_WIDE 0x40
#define MLX_PHYS_DRV_TAG 0x80
u_int8_t pd_status;
#define MLX_PHYS_DRV_DEAD 0x00
#define MLX_PHYS_DRV_WRONLY 0x02
#define MLX_PHYS_DRV_ONLINE 0x03
#define MLX_PHYS_DRV_STANDBY 0x10
u_int8_t pd_res1;
u_int8_t pd_period;
u_int8_t pd_offset;
u_int32_t pd_config_size;
} __attribute__ ((packed));
struct mlx_core_cfg {
u_int8_t cc_num_sys_drives;
u_int8_t cc_res1[3];
struct mlx_sys_drv cc_sys_drives[32];
struct mlx_phys_drv cc_phys_drives[5 * 16];
} __attribute__ ((packed));
/*
* Bitfields:
*
* 0-3 dcdb_target SCSI target
* 4-7 dcdb_target SCSI channel
* 0-3 dcdb_length CDB length
* 4-7 dcdb_length high 4 bits of `datasize'
*/
struct mlx_dcdb {
u_int8_t dcdb_target;
u_int8_t dcdb_flags;
#define MLX_DCDB_NO_DATA 0x00
#define MLX_DCDB_DATA_IN 0x01
#define MLX_DCDB_DATA_OUT 0x02
#define MLX_DCDB_EARLY_STATUS 0x04
#define MLX_DCDB_TIMEOUT_10S 0x10 /* This lot is wrong? [ad] */
#define MLX_DCDB_TIMEOUT_60S 0x20
#define MLX_DCDB_TIMEOUT_20M 0x30
#define MLX_DCDB_TIMEOUT_24H 0x40
#define MLX_DCDB_NO_AUTO_SENSE 0x40 /* XXX ?? */
#define MLX_DCDB_DISCONNECT 0x80
u_int16_t dcdb_datasize;
u_int32_t dcdb_physaddr;
u_int8_t dcdb_length;
u_int8_t dcdb_sense_length;
u_int8_t dcdb_cdb[12];
u_int8_t dcdb_sense[64];
u_int8_t dcdb_status;
u_int8_t res1;
} __attribute__ ((packed));
struct mlx_bbtable_entry {
u_int32_t bbt_block_number;
u_int8_t bbt_extent;
u_int8_t bbt_res1;
u_int8_t bbt_entry_type;
u_int8_t bbt_system_drive; /* high 3 bits reserved */
} __attribute__ ((packed));
#endif /* !_IC_MLXREG_H_ */