148 lines
4.8 KiB
C
148 lines
4.8 KiB
C
/* $NetBSD: ate_subr.c,v 1.1 2001/03/31 00:26:54 jdolecek Exp $ */
|
|
|
|
/*
|
|
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
|
|
*
|
|
* This software may be used, modified, copied, distributed, and sold, in
|
|
* both source and binary form provided that the above copyright, these
|
|
* terms and the following disclaimer are retained. The name of the author
|
|
* and/or the contributor may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Portions copyright (C) 1993, David Greenman. This software may be used,
|
|
* modified, copied, distributed, and sold, in both source and binary form
|
|
* provided that the above copyright and these terms are retained. Under no
|
|
* circumstances is the author responsible for the proper functioning of this
|
|
* software, nor does the author assume any responsibility for damages
|
|
* incurred with its use.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <dev/ic/mb86960reg.h>
|
|
#include <dev/ic/ate_subr.h>
|
|
|
|
#include <dev/isa/if_fereg.h> /* XXX */
|
|
|
|
static __inline__ void ate_strobe __P((bus_space_tag_t, bus_space_handle_t));
|
|
|
|
/*
|
|
* Routines to read all bytes from the config EEPROM through MB86965A.
|
|
* I'm not sure what exactly I'm doing here... I was told just to follow
|
|
* the steps, and it worked. Could someone tell me why the following
|
|
* code works? (Or, why all similar codes I tried previously doesn't
|
|
* work.) FIXME.
|
|
*/
|
|
|
|
static __inline__ void
|
|
ate_strobe (iot, ioh)
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
{
|
|
|
|
/*
|
|
* Output same value twice. To speed-down execution?
|
|
*/
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT | FE_B16_CLOCK);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT | FE_B16_CLOCK);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT);
|
|
}
|
|
|
|
void
|
|
ate_read_eeprom(iot, ioh, data)
|
|
bus_space_tag_t iot;
|
|
bus_space_handle_t ioh;
|
|
u_char *data;
|
|
{
|
|
int n, count;
|
|
u_char val, bit;
|
|
|
|
/* Read bytes from EEPROM; two bytes per an iteration. */
|
|
for (n = 0; n < FE_EEPROM_SIZE / 2; n++) {
|
|
/* Reset the EEPROM interface. */
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, 0x00);
|
|
bus_space_write_1(iot, ioh, FE_BMPR17, 0x00);
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, FE_B16_SELECT);
|
|
|
|
/* Start EEPROM access. */
|
|
bus_space_write_1(iot, ioh, FE_BMPR17, FE_B17_DATA);
|
|
ate_strobe(iot, ioh);
|
|
|
|
/* Pass the iteration count to the chip. */
|
|
count = 0x80 | n;
|
|
for (bit = 0x80; bit != 0x00; bit >>= 1) {
|
|
bus_space_write_1(iot, ioh, FE_BMPR17,
|
|
(count & bit) ? FE_B17_DATA : 0);
|
|
ate_strobe(iot, ioh);
|
|
}
|
|
bus_space_write_1(iot, ioh, FE_BMPR17, 0x00);
|
|
|
|
/* Read a byte. */
|
|
val = 0;
|
|
for (bit = 0x80; bit != 0x00; bit >>= 1) {
|
|
ate_strobe(iot, ioh);
|
|
if (bus_space_read_1(iot, ioh, FE_BMPR17) &
|
|
FE_B17_DATA)
|
|
val |= bit;
|
|
}
|
|
*data++ = val;
|
|
|
|
/* Read one more byte. */
|
|
val = 0;
|
|
for (bit = 0x80; bit != 0x00; bit >>= 1) {
|
|
ate_strobe(iot, ioh);
|
|
if (bus_space_read_1(iot, ioh, FE_BMPR17) &
|
|
FE_B17_DATA)
|
|
val |= bit;
|
|
}
|
|
*data++ = val;
|
|
}
|
|
|
|
/* Make sure the EEPROM is turned off. */
|
|
bus_space_write_1(iot, ioh, FE_BMPR16, 0);
|
|
bus_space_write_1(iot, ioh, FE_BMPR17, 0);
|
|
|
|
#if ATE_DEBUG >= 3
|
|
/* Report what we got. */
|
|
data -= FE_EEPROM_SIZE;
|
|
log(LOG_INFO, "ate_read_eeprom: EEPROM at %04x:"
|
|
" %02x%02x%02x%02x %02x%02x%02x%02x -"
|
|
" %02x%02x%02x%02x %02x%02x%02x%02x -"
|
|
" %02x%02x%02x%02x %02x%02x%02x%02x -"
|
|
" %02x%02x%02x%02x %02x%02x%02x%02x\n",
|
|
(int) ioh, /* XXX */
|
|
data[ 0], data[ 1], data[ 2], data[ 3],
|
|
data[ 4], data[ 5], data[ 6], data[ 7],
|
|
data[ 8], data[ 9], data[10], data[11],
|
|
data[12], data[13], data[14], data[15],
|
|
data[16], data[17], data[18], data[19],
|
|
data[20], data[21], data[22], data[23],
|
|
data[24], data[25], data[26], data[27],
|
|
data[28], data[29], data[30], data[31]);
|
|
#endif
|
|
}
|