310 lines
9.4 KiB
C
310 lines
9.4 KiB
C
/**************************************************************************
|
|
|
|
Copyright (c) 2007, Chelsio Inc.
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Neither the name of the Chelsio Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
#include <sys/cdefs.h>
|
|
#ifdef __FreeBSD__
|
|
__FBSDID("$FreeBSD: src/sys/dev/cxgb/common/cxgb_mv88e1xxx.c,v 1.2 2007/05/28 22:57:26 kmacy Exp $");
|
|
#endif
|
|
|
|
#ifdef CONFIG_DEFINED
|
|
#include <cxgb_include.h>
|
|
#else
|
|
#ifdef __FreeBSD__
|
|
#include <dev/cxgb/cxgb_include.h>
|
|
#endif
|
|
#ifdef __NetBSD__
|
|
#include <dev/pci/cxgb_include.h>
|
|
#endif
|
|
#endif
|
|
|
|
/* Marvell PHY interrupt status bits. */
|
|
#define MV_INTR_JABBER 0x0001
|
|
#define MV_INTR_POLARITY_CHNG 0x0002
|
|
#define MV_INTR_ENG_DETECT_CHNG 0x0010
|
|
#define MV_INTR_DOWNSHIFT 0x0020
|
|
#define MV_INTR_MDI_XOVER_CHNG 0x0040
|
|
#define MV_INTR_FIFO_OVER_UNDER 0x0080
|
|
#define MV_INTR_FALSE_CARRIER 0x0100
|
|
#define MV_INTR_SYMBOL_ERROR 0x0200
|
|
#define MV_INTR_LINK_CHNG 0x0400
|
|
#define MV_INTR_AUTONEG_DONE 0x0800
|
|
#define MV_INTR_PAGE_RECV 0x1000
|
|
#define MV_INTR_DUPLEX_CHNG 0x2000
|
|
#define MV_INTR_SPEED_CHNG 0x4000
|
|
#define MV_INTR_AUTONEG_ERR 0x8000
|
|
|
|
/* Marvell PHY specific registers. */
|
|
#define MV88E1XXX_SPECIFIC_CNTRL 16
|
|
#define MV88E1XXX_SPECIFIC_STATUS 17
|
|
#define MV88E1XXX_INTR_ENABLE 18
|
|
#define MV88E1XXX_INTR_STATUS 19
|
|
#define MV88E1XXX_EXT_SPECIFIC_CNTRL 20
|
|
#define MV88E1XXX_RECV_ERR 21
|
|
#define MV88E1XXX_EXT_ADDR 22
|
|
#define MV88E1XXX_GLOBAL_STATUS 23
|
|
#define MV88E1XXX_LED_CNTRL 24
|
|
#define MV88E1XXX_LED_OVERRIDE 25
|
|
#define MV88E1XXX_EXT_SPECIFIC_CNTRL2 26
|
|
#define MV88E1XXX_EXT_SPECIFIC_STATUS 27
|
|
#define MV88E1XXX_VIRTUAL_CABLE_TESTER 28
|
|
#define MV88E1XXX_EXTENDED_ADDR 29
|
|
#define MV88E1XXX_EXTENDED_DATA 30
|
|
|
|
/* PHY specific control register fields */
|
|
#define S_PSCR_MDI_XOVER_MODE 5
|
|
#define M_PSCR_MDI_XOVER_MODE 0x3
|
|
#define V_PSCR_MDI_XOVER_MODE(x) ((x) << S_PSCR_MDI_XOVER_MODE)
|
|
|
|
/* Extended PHY specific control register fields */
|
|
#define S_DOWNSHIFT_ENABLE 8
|
|
#define V_DOWNSHIFT_ENABLE (1 << S_DOWNSHIFT_ENABLE)
|
|
|
|
#define S_DOWNSHIFT_CNT 9
|
|
#define M_DOWNSHIFT_CNT 0x7
|
|
#define V_DOWNSHIFT_CNT(x) ((x) << S_DOWNSHIFT_CNT)
|
|
|
|
/* PHY specific status register fields */
|
|
#define S_PSSR_JABBER 0
|
|
#define V_PSSR_JABBER (1 << S_PSSR_JABBER)
|
|
|
|
#define S_PSSR_POLARITY 1
|
|
#define V_PSSR_POLARITY (1 << S_PSSR_POLARITY)
|
|
|
|
#define S_PSSR_RX_PAUSE 2
|
|
#define V_PSSR_RX_PAUSE (1 << S_PSSR_RX_PAUSE)
|
|
|
|
#define S_PSSR_TX_PAUSE 3
|
|
#define V_PSSR_TX_PAUSE (1 << S_PSSR_TX_PAUSE)
|
|
|
|
#define S_PSSR_ENERGY_DETECT 4
|
|
#define V_PSSR_ENERGY_DETECT (1 << S_PSSR_ENERGY_DETECT)
|
|
|
|
#define S_PSSR_DOWNSHIFT_STATUS 5
|
|
#define V_PSSR_DOWNSHIFT_STATUS (1 << S_PSSR_DOWNSHIFT_STATUS)
|
|
|
|
#define S_PSSR_MDI 6
|
|
#define V_PSSR_MDI (1 << S_PSSR_MDI)
|
|
|
|
#define S_PSSR_CABLE_LEN 7
|
|
#define M_PSSR_CABLE_LEN 0x7
|
|
#define V_PSSR_CABLE_LEN(x) ((x) << S_PSSR_CABLE_LEN)
|
|
#define G_PSSR_CABLE_LEN(x) (((x) >> S_PSSR_CABLE_LEN) & M_PSSR_CABLE_LEN)
|
|
|
|
#define S_PSSR_LINK 10
|
|
#define V_PSSR_LINK (1 << S_PSSR_LINK)
|
|
|
|
#define S_PSSR_STATUS_RESOLVED 11
|
|
#define V_PSSR_STATUS_RESOLVED (1 << S_PSSR_STATUS_RESOLVED)
|
|
|
|
#define S_PSSR_PAGE_RECEIVED 12
|
|
#define V_PSSR_PAGE_RECEIVED (1 << S_PSSR_PAGE_RECEIVED)
|
|
|
|
#define S_PSSR_DUPLEX 13
|
|
#define V_PSSR_DUPLEX (1 << S_PSSR_DUPLEX)
|
|
|
|
#define S_PSSR_SPEED 14
|
|
#define M_PSSR_SPEED 0x3
|
|
#define V_PSSR_SPEED(x) ((x) << S_PSSR_SPEED)
|
|
#define G_PSSR_SPEED(x) (((x) >> S_PSSR_SPEED) & M_PSSR_SPEED)
|
|
|
|
/* MV88E1XXX MDI crossover register values */
|
|
#define CROSSOVER_MDI 0
|
|
#define CROSSOVER_MDIX 1
|
|
#define CROSSOVER_AUTO 3
|
|
|
|
#define INTR_ENABLE_MASK (MV_INTR_SPEED_CHNG | MV_INTR_DUPLEX_CHNG | \
|
|
MV_INTR_AUTONEG_DONE | MV_INTR_LINK_CHNG | MV_INTR_FIFO_OVER_UNDER | \
|
|
MV_INTR_ENG_DETECT_CHNG)
|
|
|
|
/*
|
|
* Reset the PHY. If 'wait' is set wait until the reset completes.
|
|
*/
|
|
static int mv88e1xxx_reset(struct cphy *cphy, int wait)
|
|
{
|
|
return t3_phy_reset(cphy, 0, wait);
|
|
}
|
|
|
|
static int mv88e1xxx_intr_enable(struct cphy *cphy)
|
|
{
|
|
return mdio_write(cphy, 0, MV88E1XXX_INTR_ENABLE, INTR_ENABLE_MASK);
|
|
}
|
|
|
|
static int mv88e1xxx_intr_disable(struct cphy *cphy)
|
|
{
|
|
return mdio_write(cphy, 0, MV88E1XXX_INTR_ENABLE, 0);
|
|
}
|
|
|
|
static int mv88e1xxx_intr_clear(struct cphy *cphy)
|
|
{
|
|
u32 val;
|
|
|
|
/* Clear PHY interrupts by reading the register. */
|
|
return mdio_read(cphy, 0, MV88E1XXX_INTR_STATUS, &val);
|
|
}
|
|
|
|
static int mv88e1xxx_crossover_set(struct cphy *cphy, int crossover)
|
|
{
|
|
return t3_mdio_change_bits(cphy, 0, MV88E1XXX_SPECIFIC_CNTRL,
|
|
V_PSCR_MDI_XOVER_MODE(M_PSCR_MDI_XOVER_MODE),
|
|
V_PSCR_MDI_XOVER_MODE(crossover));
|
|
}
|
|
|
|
static int mv88e1xxx_autoneg_enable(struct cphy *cphy)
|
|
{
|
|
mv88e1xxx_crossover_set(cphy, CROSSOVER_AUTO);
|
|
|
|
/* restart autoneg for change to take effect */
|
|
return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
|
|
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
}
|
|
|
|
static int mv88e1xxx_autoneg_restart(struct cphy *cphy)
|
|
{
|
|
return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
|
|
BMCR_ANRESTART);
|
|
}
|
|
|
|
static int mv88e1xxx_set_loopback(struct cphy *cphy, int mmd, int dir, int on)
|
|
{
|
|
return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_LOOPBACK,
|
|
on ? BMCR_LOOPBACK : 0);
|
|
}
|
|
|
|
static int mv88e1xxx_get_link_status(struct cphy *cphy, int *link_ok,
|
|
int *speed, int *duplex, int *fc)
|
|
{
|
|
u32 status;
|
|
int sp = -1, dplx = -1, pause = 0;
|
|
|
|
mdio_read(cphy, 0, MV88E1XXX_SPECIFIC_STATUS, &status);
|
|
if ((status & V_PSSR_STATUS_RESOLVED) != 0) {
|
|
if (status & V_PSSR_RX_PAUSE)
|
|
pause |= PAUSE_RX;
|
|
if (status & V_PSSR_TX_PAUSE)
|
|
pause |= PAUSE_TX;
|
|
dplx = (status & V_PSSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
sp = G_PSSR_SPEED(status);
|
|
if (sp == 0)
|
|
sp = SPEED_10;
|
|
else if (sp == 1)
|
|
sp = SPEED_100;
|
|
else
|
|
sp = SPEED_1000;
|
|
}
|
|
if (link_ok)
|
|
*link_ok = (status & V_PSSR_LINK) != 0;
|
|
if (speed)
|
|
*speed = sp;
|
|
if (duplex)
|
|
*duplex = dplx;
|
|
if (fc)
|
|
*fc = pause;
|
|
return 0;
|
|
}
|
|
|
|
static int mv88e1xxx_downshift_set(struct cphy *cphy, int downshift_enable)
|
|
{
|
|
/*
|
|
* Set the downshift counter to 2 so we try to establish Gb link
|
|
* twice before downshifting.
|
|
*/
|
|
return t3_mdio_change_bits(cphy, 0, MV88E1XXX_EXT_SPECIFIC_CNTRL,
|
|
V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(M_DOWNSHIFT_CNT),
|
|
downshift_enable ? V_DOWNSHIFT_ENABLE | V_DOWNSHIFT_CNT(2) : 0);
|
|
}
|
|
|
|
static int mv88e1xxx_power_down(struct cphy *cphy, int enable)
|
|
{
|
|
return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
|
|
enable ? BMCR_PDOWN : 0);
|
|
}
|
|
|
|
static int mv88e1xxx_intr_handler(struct cphy *cphy)
|
|
{
|
|
const u32 link_change_intrs = MV_INTR_LINK_CHNG |
|
|
MV_INTR_AUTONEG_DONE | MV_INTR_DUPLEX_CHNG |
|
|
MV_INTR_SPEED_CHNG | MV_INTR_DOWNSHIFT;
|
|
|
|
u32 cause;
|
|
int cphy_cause = 0;
|
|
|
|
mdio_read(cphy, 0, MV88E1XXX_INTR_STATUS, &cause);
|
|
cause &= INTR_ENABLE_MASK;
|
|
if (cause & link_change_intrs)
|
|
cphy_cause |= cphy_cause_link_change;
|
|
if (cause & MV_INTR_FIFO_OVER_UNDER)
|
|
cphy_cause |= cphy_cause_fifo_error;
|
|
return cphy_cause;
|
|
}
|
|
|
|
#ifdef C99_NOT_SUPPORTED
|
|
static struct cphy_ops mv88e1xxx_ops = {
|
|
NULL,
|
|
mv88e1xxx_reset,
|
|
mv88e1xxx_intr_enable,
|
|
mv88e1xxx_intr_disable,
|
|
mv88e1xxx_intr_clear,
|
|
mv88e1xxx_intr_handler,
|
|
mv88e1xxx_autoneg_enable,
|
|
mv88e1xxx_autoneg_restart,
|
|
t3_phy_advertise,
|
|
mv88e1xxx_set_loopback,
|
|
t3_set_phy_speed_duplex,
|
|
mv88e1xxx_get_link_status,
|
|
mv88e1xxx_power_down,
|
|
};
|
|
#else
|
|
static struct cphy_ops mv88e1xxx_ops = {
|
|
.reset = mv88e1xxx_reset,
|
|
.intr_enable = mv88e1xxx_intr_enable,
|
|
.intr_disable = mv88e1xxx_intr_disable,
|
|
.intr_clear = mv88e1xxx_intr_clear,
|
|
.intr_handler = mv88e1xxx_intr_handler,
|
|
.autoneg_enable = mv88e1xxx_autoneg_enable,
|
|
.autoneg_restart = mv88e1xxx_autoneg_restart,
|
|
.advertise = t3_phy_advertise,
|
|
.set_loopback = mv88e1xxx_set_loopback,
|
|
.set_speed_duplex = t3_set_phy_speed_duplex,
|
|
.get_link_status = mv88e1xxx_get_link_status,
|
|
.power_down = mv88e1xxx_power_down,
|
|
};
|
|
#endif
|
|
|
|
void t3_mv88e1xxx_phy_prep(struct cphy *phy, adapter_t *adapter, int phy_addr,
|
|
const struct mdio_ops *mdio_ops)
|
|
{
|
|
cphy_init(phy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
|
|
|
|
/* Configure copper PHY transmitter as class A to reduce EMI. */
|
|
mdio_write(phy, 0, MV88E1XXX_EXTENDED_ADDR, 0xb);
|
|
mdio_write(phy, 0, MV88E1XXX_EXTENDED_DATA, 0x8004);
|
|
|
|
mv88e1xxx_downshift_set(phy, 1); /* Enable downshift */
|
|
}
|