376 lines
13 KiB
Plaintext
376 lines
13 KiB
Plaintext
# $NetBSD: GENERIC,v 1.89 2015/09/07 23:01:08 phx Exp $
|
|
#
|
|
# machine description file for GENERIC NAS
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/sandpoint/conf/std.sandpoint"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.89 $"
|
|
|
|
maxusers 32
|
|
|
|
#options ALTIVEC # Include AltiVec support
|
|
|
|
# Standard system options
|
|
#options INSECURE # disable kernel security levels
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options KTRACE
|
|
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
options SYSVSHM # System V shared memory
|
|
|
|
#options MODULAR # module(7) support
|
|
#options MODULAR_DEFAULT_AUTOLOAD
|
|
#options USERCONF # userconf(4) support
|
|
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # cheap kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
options DDB
|
|
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
#options TRAP_PANICWAIT
|
|
#options PMAPCHECK
|
|
#options PMAPDEBUG
|
|
options MSGBUFSIZE=65536
|
|
|
|
#makeoptions DEBUG="-g"
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
|
|
options COMPAT_09 # NetBSD 0.9,
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI),
|
|
options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI),
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_16 # NetBSD 1.6,
|
|
options COMPAT_20 # NetBSD 2.0,
|
|
options COMPAT_30 # NetBSD 3.0,
|
|
options COMPAT_40 # NetBSD 4.0,
|
|
options COMPAT_50 # NetBSD 5.0,
|
|
options COMPAT_60 # NetBSD 6.0, and
|
|
options COMPAT_70 # NetBSD 7.0 binary compatibility.
|
|
options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
|
|
#options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options COMPAT_LINUX # binary compatibility with Linux
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# Wedge support
|
|
options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances
|
|
options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges
|
|
#options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges
|
|
#options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges
|
|
options DKWEDGE_METHOD_APPLE # Support Apple partitions as wedges
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
#file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
#file-system OVERLAY # overlay file system
|
|
file-system PROCFS # /proc
|
|
#file-system UMAPFS # NULLFS + uid and gid remapping
|
|
#file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
|
file-system PTYFS # /dev/ptm support
|
|
file-system TMPFS # Efficient memory file-system
|
|
|
|
# File system options
|
|
options QUOTA # legacy UFS quotas
|
|
options QUOTA2 # new, in-filesystem UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
options NFSSERVER # Network File System server
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
options UFS_EXTATTR # Extended attribute support for UFS1
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
|
|
#options NFS_BOOT_DHCP
|
|
options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options PIM # Protocol Independent Multicast
|
|
#options NETATALK # AppleTalk networking protocols
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires BPF)
|
|
#options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_LOOKUP # ippool(8) support
|
|
#options IPFILTER_COMPAT # Compat for IP-Filter
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options MIIVERBOSE # verbose PHY autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
#options SCSIVERBOSE # human readable SCSI error messages
|
|
#options USBVERBOSE # verbose USB device autoconfig messages
|
|
|
|
# Kernel root file system and dump configuration
|
|
config netbsd root on ? type ?
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
mainbus0 at root
|
|
cpu* at mainbus0
|
|
|
|
cfi0 at mainbus0
|
|
nor* at cfi?
|
|
flash* at nor?
|
|
|
|
nhpow0 at mainbus0 # NH230/231 power,LED,buttons
|
|
|
|
#options PCI_NETBSD_CONFIGURE
|
|
pci* at mainbus0 bus ?
|
|
pchb* at pci? dev ? function ? # PCI host bridge
|
|
|
|
eumb* at mainbus0
|
|
com0 at eumb? unit 0 # console at 0x4500
|
|
#com1 at eumb? unit 1
|
|
satmgr0 at eumb? unit 1 # satmgr at 0x4600
|
|
ociic* at eumb?
|
|
iic* at ociic?
|
|
rs5c372rtc* at iic? addr 0x32
|
|
s390rtc* at iic? addr 0x30
|
|
pcf8563rtc* at iic? addr 0x51
|
|
dsrtc* at iic? addr 0x68
|
|
strtc* at iic? addr 0x68
|
|
options STRTC_NO_WATCHDOG
|
|
options STRTC_NO_USERRAM
|
|
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
acardide* at pci? dev ? function ? # Acard IDE controllers
|
|
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
|
|
iteide* at pci? dev ? function ? # IT Express IDE controllers
|
|
satalink* at pci? dev ? function ? # SiI SATALink controllers
|
|
viaide* at pci? dev ? function ? # VIA IDE controllers
|
|
|
|
# ATA (IDE) bus support
|
|
atabus* at ata?
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at atabus? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
# PCI network interfaces
|
|
ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g
|
|
re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S
|
|
skc* at pci? dev ? function ? # Marvell Yukon Gigabit Ethernet
|
|
sk* at skc? # Marvell Yukon Gigabit Ethernet
|
|
stge* at pci? dev ? function ? # Sundance ST1023 Gigabit
|
|
tlp* at pci? dev ? function ? # DEC Tulip and similar
|
|
wm* at pci? dev ? function ? # Intel 8254x Gigabit Ethernet
|
|
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
|
|
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
# GPIO devices
|
|
gpio* at gpiobus?
|
|
|
|
# USB Controller and Devices
|
|
ehci* at pci? dev ? function ? # Enhanced Host Controller
|
|
ohci* at pci? dev ? function ? # Open Host Controller
|
|
|
|
# USB bus support
|
|
usb* at ehci?
|
|
usb* at ohci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ?
|
|
|
|
# USB HID devices
|
|
uhidev* at uhub? port ? configuration ? interface ? # USB HID device
|
|
uthum* at uhidev? reportid ? # TEMPerHUM sensors
|
|
uhid* at uhidev? reportid ? # USB Generic HID
|
|
|
|
# USB video
|
|
uvideo* at uhub? # USB Video Class capture devices
|
|
video* at videobus?
|
|
|
|
# USB printer
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
wd* at umass?
|
|
|
|
# USB scanners
|
|
#uscanner* at uhub? port ?
|
|
ugen* at uhub? port ? configuration ? interface ? # USB Generic driver
|
|
|
|
# SCSI bus support
|
|
scsibus* at umass?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
|
|
|
|
#
|
|
# Pseudo-Devices
|
|
#
|
|
#pseudo-device crypto # /dev/crypto device
|
|
#pseudo-device swcrypto # software crypto implementation
|
|
|
|
# disk/mass storage pseudo-devices
|
|
#pseudo-device ccd # concatenated/striped disk devices
|
|
#pseudo-device cgd # cryptographic disk devices
|
|
pseudo-device fss # file system snapshot device
|
|
#pseudo-device putter # for puffs and pud
|
|
|
|
pseudo-device raid # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
|
|
pseudo-device vnd
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
|
|
# network pseudo-devices
|
|
pseudo-device loop
|
|
pseudo-device bpfilter # packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
#pseudo-device ppp # Point-to-Point Protocol
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device ipfilter
|
|
#pseudo-device pf # PF packet filter
|
|
#pseudo-device pflog # PF log if
|
|
#pseudo-device sl # Serial Line IP
|
|
#pseudo-device vlan # IEEE 802.1q encapsulation
|
|
#pseudo-device tun # network tunneling over tty
|
|
#pseudo-device tap # virtual Ethernet
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
#pseudo-device vlan # IEEE 802.1q encapsulation
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
#pseudo-device agr # IEEE 802.3ad link aggregation
|
|
|
|
#
|
|
# accept filters
|
|
#pseudo-device accf_data # "dataready" accept filter
|
|
#pseudo-device accf_http # "httpready" accept filter
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device ksyms # /dev/ksyms
|
|
#pseudo-device lockstat # lock profiling
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda # coda minicache <-> venus comm.
|
|
|
|
# a pseudo device needed for SMBFS
|
|
#pseudo-device nsmb # experimental - SMB requester
|
|
|
|
# userland interface to drivers, including autoconf and properties retrieval
|
|
pseudo-device drvctl
|
|
|
|
# Veriexec
|
|
#
|
|
# a pseudo device needed for veriexec
|
|
#pseudo-device veriexec
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|
|
|
|
#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|
|
#options PAX_ASLR=0 # PaX Address Space Layout Randomization
|