Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic
History
thorpej 4ad627c09b Do the unaligned buffer fixup without copying data, more-or-less lifted 
from the Shark CS8900 driver.
1998-06-10 01:15:50 +00:00
..
ad1848reg.h
…
aha.c
Sync with recent change made to bha.c by mjacob:
1998-04-29 01:02:44 +00:00
ahareg.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-09 10:53:07 +00:00
ahavar.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-09 10:53:07 +00:00
aic7xxx.c
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
1998-04-16 07:12:43 +00:00
aic7xxxreg.h
…
aic7xxxvar.h
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
aic6360.c
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
aic6360reg.h
…
aic6360var.h
…
am7930.c
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:13:23 +00:00
am7930reg.h
…
am7930var.h
…
am7990.c
the AM7990 is a controller, not a "card"; repair a misleading diagnostic.
1998-06-07 08:08:20 +00:00
am7990reg.h
…
am7990var.h
Adjust for config changes.
1998-01-12 09:23:08 +00:00
bha.c
Cute buglet: you can end up with zero CCBs if there were no targets
1998-04-28 23:57:53 +00:00
bhareg.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-06 23:06:44 +00:00
bhavar.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-06 23:06:44 +00:00
bt485reg.h
The "mi" TGA driver. It's still not of much use on anything but alpha
1998-04-15 20:16:30 +00:00
cd1190reg.h
Erase spurious end-of-comment.
1998-05-20 16:06:56 +00:00
cd1400reg.h
Add CD1400_PAR_FIFO_SIZE.
1998-05-20 00:03:11 +00:00
com.c
Move the code to wait for carrier on a tty into a common function, since it
1998-03-22 00:55:37 +00:00
comreg.h
…
comvar.h
change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
1998-02-02 23:01:02 +00:00
cs4231reg.h
…
cy.c
Fix error in previous change.
1998-03-22 19:36:52 +00:00
cyreg.h
…
cyvar.h
…
dc21040reg.h
Change 21040 modes slightly. Prevent infinite autosense loop of 21143 that
1998-05-22 18:50:59 +00:00
dp8390.c
Fudge the start of the data pointer of the first mbuf in the chain when
1998-01-27 23:26:21 +00:00
dp8390reg.h
…
dp8390var.h
…
ds.h
…
elink3.c
For the Rx:Tx split message change "(undefined)" to "3:5".
1998-03-04 18:10:03 +00:00
elink3reg.h
…
elink3var.h
…
hayespreg.h
…
i8042reg.h
Don't define absolute ISA addresses here but offsets into the
1998-01-18 14:41:37 +00:00
i8237reg.h
…
i8253reg.h
define offsets into "register window" instead of absolute ISA addresses
1998-01-19 11:38:00 +00:00
i82365.c
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:35:06 +00:00
i82365reg.h
…
i82365var.h
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
i82586.c
Check for the ether broadcast address in promiscuous mode (PR#5527).
1998-06-04 20:35:44 +00:00
i82586reg.h
Remove `_NEW_I82586' tag; all drivers using this file have been converted.
1998-02-28 01:07:45 +00:00
i82586var.h
Move "async command" state in here.
1998-01-15 16:08:32 +00:00
i82595reg.h
…
ics2101reg.h
…
intersil7170.h
…
interwave.c
Make probe message more consistent with usual practice.
1998-04-20 20:58:05 +00:00
interwavereg.h
…
interwavevar.h
…
isp.c
there is an (unimportant) difference between 1020 && 1020A
1998-05-05 22:10:36 +00:00
ispmbox.h
…
ispreg.h
…
ispvar.h
there is an (unimportant) difference between 1020 && 1020A
1998-05-05 22:10:36 +00:00
lemac.c
Fix alignment crashes on Alphas...
1998-05-14 18:24:00 +00:00
lemacreg.h
…
lemacvar.h
Fix alignment crashes on Alphas...
1998-05-14 18:24:00 +00:00
lpt.c
Implement a flag to indicate that the driver attached correctly.
1998-02-02 22:54:55 +00:00
lptreg.h
…
lptvar.h
Implement a flag to indicate that the driver attached correctly.
1998-02-02 22:54:55 +00:00
mb86960.c
Oops; make the table const.
1998-03-29 22:36:42 +00:00
mb86960reg.h
fix typo
1998-03-23 16:57:21 +00:00
mb86960var.h
Split Fujitsu MB9696x based ethernet card driver into bus
1998-03-22 04:25:36 +00:00
mc6845reg.h
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
mc146818reg.h
…
midway.c
Adjust for config changes.
1998-01-12 09:23:08 +00:00
midwayreg.h
…
midwayvar.h
…
ncr53c9x.c
If we have an NCR53CF9x (indicated by the front-end by setting a flag
1998-05-26 23:17:34 +00:00
ncr53c9xreg.h
…
ncr53c9xvar.h
If we have an NCR53CF9x (indicated by the front-end by setting a flag
1998-05-26 23:17:34 +00:00
ncr5380.doc
…
ncr5380reg.h
…
ncr5380sbc.c
…
ncr5380var.h
…
ne2000.c
Do the unaligned buffer fixup without copying data, more-or-less lifted
1998-06-10 01:15:50 +00:00
ne2000reg.h
…
ne2000var.h
…
nec765reg.h
…
ns16450reg.h
…
ns16550reg.h
…
opl3sa3.h
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
1998-05-20 16:19:41 +00:00
pcdisplay_subr.c
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
pcdisplay.h
needed for VGA text attributes
1998-05-14 23:11:03 +00:00
pcdisplayvar.h
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
pdq_ifsubr.c
Fix syncing of consumer block.
1998-05-27 01:17:53 +00:00
pdq.c
Another bug fix (clear transmit done before trying to queue more transmits).
1998-05-28 03:07:49 +00:00
pdqreg.h
Only enable transmit done interrupts when output ring is full.
1998-05-27 14:01:02 +00:00
pdqvar.h
Fix syncing of consumer block.
1998-05-27 01:17:53 +00:00
rrunner.c
Make this build w/ EGCS.
1998-06-08 07:11:51 +00:00
rrunnerreg.h
Correct copyright date.
1998-05-17 16:46:06 +00:00
rrunnervar.h
Make this build w/ EGCS.
1998-06-08 07:11:51 +00:00
smc83c170.c
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100)
1998-06-02 01:29:41 +00:00
smc83c170reg.h
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100)
1998-06-02 01:29:41 +00:00
smc83c170var.h
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100)
1998-06-02 01:29:41 +00:00
smc90cx6.c
Adjust for config changes.
1998-01-12 09:23:08 +00:00
smc90cx6reg.h
…
smc91cxx.c
Adjust for config changes.
1998-01-12 09:23:08 +00:00
smc91cxxreg.h
…
smc91cxxvar.h
…
smc93cx6.c
…
smc93cx6var.h
…
st16650reg.h
…
tms320av110.c
…
tms320av110reg.h
…
tms320av110var.h
…
uha.c
- Perform all necessary bus_dmamap_sync() operations.
1998-02-17 03:02:30 +00:00
uhareg.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-17 03:02:30 +00:00
uhavar.h
- Perform all necessary bus_dmamap_sync() operations.
1998-02-17 03:02:30 +00:00
vga_subr.c
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
vga.c
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
vgareg.h
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
vgavar.h
Put definitions and subroutines needed for all PC display adapters
1998-05-28 16:48:40 +00:00
wdc.c
Make this compile with WDDEBUG
1998-06-04 02:27:33 +00:00
wdcreg.h
In LBA mode, always use the `total capacity' count, rather than calculating
1998-04-26 05:28:23 +00:00
wdcvar.h
Add hooks to make exclusive hardware locking possible. This is necessary
1998-04-07 19:51:57 +00:00
z8530.doc
…
z8530reg.h
…
z8530sc.c
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
1998-03-22 02:36:02 +00:00
z8530sc.h
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
z8530tty.c
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00