NetBSD/sys/arch/arm32/podulebus/if_ebreg.h

158 lines
5.0 KiB
C

/* $NetBSD: if_ebreg.h,v 1.1 1996/01/31 23:25:47 mark Exp $ */
/*
* Copyright (c) 1995 Mark Brinicombe
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* RiscBSD kernel project
*
* if_ebreg.h
*
* EtherB device driver
*
* Created : 08/07/95
* Last updated : 10/07/95
*
* $Id: if_ebreg.h,v 1.1 1996/01/31 23:25:47 mark Exp $
*/
/*
* SEEQ 80C04 Register Definitions
*/
#define EB_8004_BASE 0x800
/*
* SEEQ 80C04 registers
*/
#define EB_8004_COMMAND 0x000
#define EB_8004_STATUS 0x000
#define EB_8004_CONFIG1 0x040
#define EB_8004_CONFIG2 0x080
#define EB_8004_RX_END 0x0c0
#define EB_8004_BUFWIN 0x100
#define EB_8004_RX_PTR 0x140
#define EB_8004_TX_PTR 0x180
#define EB_8004_DMA_ADDR 0x1c0
/* */
#define EB_CMD_TEST_INTEN (1 << 0)
#define EB_CMD_RX_INTEN (1 << 1)
#define EB_CMD_TX_INTEN (1 << 2)
#define EB_CMD_TEST_INTACK (1 << 4)
#define EB_CMD_RX_INTACK (1 << 5)
#define EB_CMD_TX_INTACK (1 << 6)
#define EB_CMD_BW_INTACK (1 << 7)
#define EB_CMD_TEST_INT1 (1 << 8)
#define EB_CMD_RX_ON (1 << 9)
#define EB_CMD_TX_ON (1 << 10)
#define EB_CMD_TEST_INT2 (1 << 11)
#define EB_CMD_RX_OFF (1 << 12)
#define EB_CMD_TX_OFF (1 << 13)
#define EB_CMD_FIFO_READ (1 << 14)
#define EB_CMD_FIFO_WRITE (1 << 15)
#define EB_STATUS_TEST_INT (1 << 4)
#define EB_STATUS_RX_INT (1 << 5)
#define EB_STATUS_TX_INT (1 << 6)
#define EB_STATUS_RX_ON (1 << 9)
#define EB_STATUS_TX_ON (1 << 10)
#define EB_STATUS_TX_NOFAIL (1 << 12)
#define EB_STATUS_FIFO_FULL (1 << 13)
#define EB_STATUS_FIFO_EMPTY (1 << 14)
#define EB_STATUS_FIFO_DIR (1 << 15)
#define EB_STATUS_FIFO_READ (1 << 15)
#define EB_CFG1_SPECIFIC ((0 << 15) | (0 << 14))
#define EB_CFG1_BROADCAST ((0 << 15) | (1 << 14))
#define EB_CFG1_MULTICAST ((1 << 15) | (0 << 14))
#define EB_CFG1_PROMISCUOUS ((1 << 15) | (1 << 14))
#define EB_CFG2_BYTESWAP (1 << 0)
#define EB_CFG2_REA_AUTOUPDATE (1 << 1)
#define EB_CFG2_RX_TX_DISABLE (1 << 2)
#define EB_CFG2_CRC_ERR_ENABLE (1 << 3)
#define EB_CFG2_DRIB_ERR_ENABLE (1 << 4)
#define EB_CFG2_PASS_LONGSHORT (1 << 5)
#define EB_CFG2_PREAM_SELECT (1 << 7)
#define EB_CFG2_RX_CRC (1 << 9)
#define EB_CFG2_NO_TX_CRC (1 << 10)
#define EB_CFG2_LOOPBACK (1 << 11)
#define EB_CFG2_OUTPUT (1 << 12)
#define EB_CFG2_RESET (1 << 15)
#define EB_CFG3_SLEEP (1 << 3)
#define EB_BUFCODE_STATION_ADDR 0x00
#define EB_BUFCODE_ADDRESS_PROM 0x06
#define EB_BUFCODE_TX_EAP 0x07
#define EB_BUFCODE_LOCAL_MEM 0x08
#define EB_BUFCODE_TX_COLLS 0x0b
#define EB_BUFCODE_CONFIG3 0x0c
#define EB_BUFCODE_PRODUCTID 0x0d
#define EB_BUFCODE_TESTENABLE 0x0e
#define EB_BUFCODE_MULTICAST 0x0f
#define EB_PKTHDR_TX (1 << 7)
#define EB_PKTHDR_RX (0 << 7)
#define EB_PKTHDR_CHAIN_CONT (1 << 6)
#define EB_PKTHDR_DATA_FOLLOWS (1 << 5)
#define EB_PKTHDR_DONE (1 << 7)
#define EB_TXHDR_BABBLE (1 << 0)
#define EB_TXHDR_COLLISION (1 << 1)
#define EB_TXHDR_COLLISION16 (1 << 2)
#define EB_TXHDR_COLLISIONMASK (0x78)
#define EB_TXHDR_ERROR_MASK (0x07)
#define EB_TXHDR_BABBLE_INT (1 << 0)
#define EB_TXHDR_COLLISION_INT (1 << 1)
#define EB_TXHDR_COLLISION16_INT (1 << 2)
#define EB_TXHDR_XMIT_SUCCESS_INT (1 << 3)
#define EB_TXHDR_SQET_TEST_INT (1 << 3)
#define EB_RXHDR_OVERSIZE (1 << 0)
#define EB_RXHDR_CRC_ERROR (1 << 1)
#define EB_RXHDR_DRIBBLE_ERROR (1 << 2)
#define EB_RXHDR_SHORT_FRAME (1 << 3)
#define EB_BUFFER_SIZE 0x10000
#define EB_TX_BUFFER_SIZE 0x4000
#define EB_RX_BUFFER_SIZE 0xC000
/* Packet buffer size */
#define EB_BUFSIZ 2048
/* End of if_ebreg.h */