5df9a04912
the driver was originally written by Jason L. Wright. XXX: i haven't tested this on sparc64 at all...
417 lines
17 KiB
C
417 lines
17 KiB
C
/* $NetBSD: spifreg.h,v 1.1 2004/07/24 12:37:20 mrg Exp $ */
|
|
/* $OpenBSD: spifreg.h,v 1.5 2003/06/02 18:32:41 jason Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1999-2002 Jason L. Wright (jason@thought.net)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* Effort sponsored in part by the Defense Advanced Research Projects
|
|
* Agency (DARPA) and Air Force Research Laboratory, Air Force
|
|
* Materiel Command, USAF, under agreement number F30602-01-2-0537.
|
|
*
|
|
*/
|
|
|
|
#define PPC_IN_PDATA 0x000 /* input data */
|
|
#define PPC_IN_PSTAT 0x001 /* input status */
|
|
#define PPC_IN_CTRL 0x002 /* input control */
|
|
#define PPC_IN_PWEIRD 0x003 /* input weird */
|
|
#define PPC_OUT_PDATA 0x000 /* output data */
|
|
#define PPC_OUT_PSTAT 0x001 /* output status */
|
|
#define PPC_OUT_PCTRL 0x002 /* output control */
|
|
#define PPC_OUT_PWEIRD 0x003 /* output weird */
|
|
#define PPC_IACK_PDATA 0x1fc /* iack data */
|
|
#define PPC_IACK_PSTAT 0x1fd /* iack status */
|
|
#define PPC_IACK_PCTRL 0x1fe /* iack control */
|
|
#define PPC_IACK_PWEIRD 0x1ff /* iack weird */
|
|
|
|
/* Parallel Status: read only */
|
|
#define PPC_PSTAT_ERROR 0x08 /* error */
|
|
#define PPC_PSTAT_SELECT 0x10 /* select */
|
|
#define PPC_PSTAT_PAPER 0x20 /* paper out */
|
|
#define PPC_PSTAT_ACK 0x40 /* ack */
|
|
#define PPC_PSTAT_BUSY 0x80 /* busy */
|
|
|
|
/* Parallel Control: read/write */
|
|
#define PPC_CTRL_STROBE 0x01 /* strobe, 1=drop strobe */
|
|
#define PPC_CTRL_AFX 0x02 /* auto form-feed */
|
|
#define PPC_CTRL_INIT 0x04 /* init, 1=enable printer */
|
|
#define PPC_CTRL_SLCT 0x08 /* SLC, 1=select printer */
|
|
#define PPC_CTRL_IRQE 0x10 /* IRQ, 1=enable intrs */
|
|
#define PPC_CTRL_OUTPUT 0x20 /* direction: 1=ppc out */
|
|
|
|
/*
|
|
* The 'stc' is a Cirrus Logic CL-CD180 (either revision B or revision C)
|
|
*/
|
|
#define STC_CCR 0x01 /* channel command */
|
|
#define STC_SRER 0x02 /* service request enable */
|
|
#define STC_COR1 0x03 /* channel option 1 */
|
|
#define STC_COR2 0x04 /* channel option 2 */
|
|
#define STC_COR3 0x05 /* channel option 3 */
|
|
#define STC_CCSR 0x06 /* channel control status */
|
|
#define STC_RDCR 0x07 /* rx data count */
|
|
#define STC_SCHR1 0x09 /* special character 1 */
|
|
#define STC_SCHR2 0x0a /* special character 2 */
|
|
#define STC_SCHR3 0x0b /* special character 3 */
|
|
#define STC_SCHR4 0x0c /* special character 4 */
|
|
#define STC_MCOR1 0x10 /* modem change option 1 */
|
|
#define STC_MCOR2 0x11 /* modem change option 2 */
|
|
#define STC_MCR 0x12 /* modem change */
|
|
#define STC_RTPR 0x18 /* rx timeout period */
|
|
#define STC_MSVR 0x28 /* modem signal value */
|
|
#define STC_MSVRTS 0x29 /* modem signal value rts */
|
|
#define STC_MSVDTR 0x2a /* modem signal value dtr */
|
|
#define STC_RBPRH 0x31 /* rx bit rate period high */
|
|
#define STC_RBPRL 0x32 /* rx bit rate period low */
|
|
#define STC_RBR 0x33 /* rx bit */
|
|
#define STC_TBPRH 0x39 /* tx bit rate period high */
|
|
#define STC_TBPRL 0x3a /* tx bit rate period low */
|
|
#define STC_GSVR 0x40 /* global service vector */
|
|
#define STC_GSCR1 0x41 /* global service channel 1 */
|
|
#define STC_GSCR2 0x42 /* global service channel 2 */
|
|
#define STC_GSCR3 0x43 /* global service channel 3 */
|
|
#define STC_MSMR 0x61 /* modem service match */
|
|
#define STC_TSMR 0x62 /* tx service match */
|
|
#define STC_RSMR 0x63 /* rx service match */
|
|
#define STC_CAR 0x64 /* channel access */
|
|
#define STC_SRSR 0x65 /* service request status */
|
|
#define STC_SRCR 0x66 /* service request config */
|
|
#define STC_GFRCR 0x6b /* global firmware rev code */
|
|
#define STC_PPRH 0x70 /* prescalar period high */
|
|
#define STC_PPRL 0x71 /* prescalar period low */
|
|
#define STC_MRAR 0x75 /* modem request ack */
|
|
#define STC_TRAR 0x76 /* tx request ack */
|
|
#define STC_RRAR 0x77 /* rx request ack */
|
|
#define STC_RDR 0x78 /* rx data */
|
|
#define STC_RCSR 0x7a /* rx character status */
|
|
#define STC_TDR 0x7b /* tx data */
|
|
#define STC_EOSRR 0x7f /* end of service */
|
|
|
|
#define STC_REGMAPSIZE 0x80
|
|
|
|
/* Global Firmware Revision Code Register (rw) */
|
|
#define CD180_GFRCR_REV_B 0x81 /* CL-CD180B */
|
|
#define CD180_GFRCR_REV_C 0x82 /* CL-CD180C */
|
|
|
|
/* Service Request Configuration Register (rw) (CD180C or higher) */
|
|
#define CD180_SRCR_PKGTYP 0x80 /* pkg type,0=PLCC,1=PQFP */
|
|
#define CD180_SRCR_REGACKEN 0x40 /* register ack enable */
|
|
#define CD180_SRCR_DAISYEN 0x20 /* daisy chain enable */
|
|
#define CD180_SRCR_GLOBPRI 0x10 /* global priority */
|
|
#define CD180_SRCR_UNFAIR 0x08 /* use unfair interrupts */
|
|
#define CD180_SRCR_AUTOPRI 0x02 /* automatic priority */
|
|
#define CD180_SRCR_PRISEL 0x01 /* select rx/tx as high pri */
|
|
|
|
/* Prescalar Period Register High (rw) */
|
|
#define CD180_PPRH 0xf0 /* high byte */
|
|
#define CD180_PPRL 0x00 /* low byte */
|
|
|
|
/* Global Service Vector Register (rw) */
|
|
/* Modem Request Acknowledgement Register (ro) (and IACK equivalent) */
|
|
/* Receive Request Acknowledgement Register (ro) (and IACK equivalent) */
|
|
/* Transmit Request Acknowledgement Register (ro) (and IACK equivalent) */
|
|
#define CD180_GSVR_USERMASK 0xf8 /* user defined bits */
|
|
#define CD180_GSVR_IMASK 0x07 /* interrupt type mask */
|
|
#define CD180_GSVR_NOREQUEST 0x00 /* no request pending */
|
|
#define CD180_GSVR_STATCHG 0x01 /* modem signal change */
|
|
#define CD180_GSVR_TXDATA 0x02 /* tx service request */
|
|
#define CD180_GSVR_RXGOOD 0x03 /* rx service request */
|
|
#define CD180_GSVR_reserved1 0x04 /* reserved */
|
|
#define CD180_GSVR_reserved2 0x05 /* reserved */
|
|
#define CD180_GSVR_reserved3 0x06 /* reserved */
|
|
#define CD180_GSVR_RXEXCEPTION 0x07 /* rx exception request */
|
|
|
|
/* Service Request Status Register (ro) (CD180C and higher) */
|
|
#define CD180_SRSR_MREQINT 0x01 /* modem request internal */
|
|
#define CD180_SRSR_MREQEXT 0x02 /* modem request external */
|
|
#define CD180_SRSR_TREQINT 0x04 /* tx request internal */
|
|
#define CD180_SRSR_TREQEXT 0x08 /* tx request external */
|
|
#define CD180_SRSR_RREQINT 0x10 /* rx request internal */
|
|
#define CD180_SRSR_RREQEXT 0x20 /* rx request external */
|
|
#define CD180_SRSR_ILV_MASK 0xc0 /* internal service context */
|
|
#define CD180_SRSR_ILV_NONE 0x00 /* not in service context */
|
|
#define CD180_SRSR_ILV_RX 0xc0 /* in rx service context */
|
|
#define CD180_SRSR_ILV_TX 0x80 /* in tx service context */
|
|
#define CD180_SRSR_ILV_MODEM 0x40 /* in modem service context */
|
|
|
|
/* Global Service Channel Register 1,2,3 (rw) */
|
|
#define CD180_GSCR_CHANNEL(gscr) (((gscr) >> 2) & 7)
|
|
|
|
/* Receive Data Count Register (ro) */
|
|
#define CD180_RDCR_MASK 0x0f /* mask for fifo length */
|
|
|
|
/* Receive Character Status Register (ro) */
|
|
#define CD180_RCSR_TO 0x80 /* time out */
|
|
#define CD180_RCSR_SCD2 0x40 /* special char detect 2 */
|
|
#define CD180_RCSR_SCD1 0x20 /* special char detect 1 */
|
|
#define CD180_RCSR_SCD0 0x10 /* special char detect 0 */
|
|
#define CD180_RCSR_BE 0x08 /* break exception */
|
|
#define CD180_RCSR_PE 0x04 /* parity exception */
|
|
#define CD180_RCSR_FE 0x02 /* framing exception */
|
|
#define CD180_RCSR_OE 0x01 /* overrun exception */
|
|
|
|
/* Service Request Enable Register (rw) */
|
|
#define CD180_SRER_DSR 0x80 /* DSR service request */
|
|
#define CD180_SRER_CD 0x40 /* CD service request */
|
|
#define CD180_SRER_CTS 0x20 /* CTS service request */
|
|
#define CD180_SRER_RXD 0x10 /* RXD service request */
|
|
#define CD180_SRER_RXSCD 0x08 /* RX special char request */
|
|
#define CD180_SRER_TXD 0x04 /* TX ready service request */
|
|
#define CD180_SRER_TXE 0x02 /* TX empty service request */
|
|
#define CD180_SRER_NNDT 0x01 /* No new data timeout req */
|
|
|
|
/* Channel Command Register (rw) */
|
|
/* Reset Channel Command */
|
|
#define CD180_CCR_CMD_RESET 0x80 /* chip/channel reset */
|
|
#define CD180_CCR_RESETALL 0x01 /* global reset */
|
|
#define CD180_CCR_RESETCHAN 0x00 /* current channel reset */
|
|
/* Channel Option Register Command */
|
|
#define CD180_CCR_CMD_COR 0x40 /* channel opt reg changed */
|
|
#define CD180_CCR_CORCHG1 0x02 /* cor1 has changed */
|
|
#define CD180_CCR_CORCHG2 0x04 /* cor2 has changed */
|
|
#define CD180_CCR_CORCHG3 0x08 /* cor3 has changed */
|
|
/* Send Special Character Command */
|
|
#define CD180_CCR_CMD_SPC 0x20 /* send special chars changed */
|
|
#define CD180_CCR_SSPC0 0x01 /* send special char 0 change */
|
|
#define CD180_CCR_SSPC1 0x02 /* send special char 1 change */
|
|
#define CD180_CCR_SSPC2 0x04 /* send special char 2 change */
|
|
/* Channel Control Command */
|
|
#define CD180_CCR_CMD_CHAN 0x10 /* channel control command */
|
|
#define CD180_CCR_CHAN_TXEN 0x08 /* enable channel tx */
|
|
#define CD180_CCR_CHAN_TXDIS 0x04 /* disable channel tx */
|
|
#define CD180_CCR_CHAN_RXEN 0x02 /* enable channel rx */
|
|
#define CD180_CCR_CHAN_RXDIS 0x01 /* disable channel rx */
|
|
|
|
/* Channel Option Register 1 (rw) */
|
|
#define CD180_COR1_EVENPAR 0x00 /* even parity */
|
|
#define CD180_COR1_ODDPAR 0x80 /* odd parity */
|
|
#define CD180_COR1_PARMODE_NO 0x00 /* no parity */
|
|
#define CD180_COR1_PARMODE_FORCE 0x20 /* force (odd=1, even=0) */
|
|
#define CD180_COR1_PARMODE_NORMAL 0x40 /* normal parity mode */
|
|
#define CD180_COR1_PARMODE_NA 0x60 /* notused */
|
|
#define CD180_COR1_IGNPAR 0x10 /* ignore parity */
|
|
#define CD180_COR1_STOP1 0x00 /* 1 stop bit */
|
|
#define CD180_COR1_STOP15 0x04 /* 1.5 stop bits */
|
|
#define CD180_COR1_STOP2 0x08 /* 2 stop bits */
|
|
#define CD180_COR1_STOP25 0x0c /* 2.5 stop bits */
|
|
#define CD180_COR1_CS5 0x00 /* 5 bit characters */
|
|
#define CD180_COR1_CS6 0x01 /* 6 bit characters */
|
|
#define CD180_COR1_CS7 0x02 /* 7 bit characters */
|
|
#define CD180_COR1_CS8 0x03 /* 8 bit characters */
|
|
|
|
/* Channel Option Register 2 (rw) */
|
|
#define CD180_COR2_IXM 0x80 /* implied xon mode */
|
|
#define CD180_COR2_TXIBE 0x40 /* tx in-band flow control */
|
|
#define CD180_COR2_ETC 0x20 /* embedded tx command enbl */
|
|
#define CD180_COR2_LLM 0x10 /* local loopback mode */
|
|
#define CD180_COR2_RLM 0x08 /* remote loopback mode */
|
|
#define CD180_COR2_RTSAO 0x04 /* RTS automatic output enbl */
|
|
#define CD180_COR2_CTSAE 0x02 /* CTS automatic enable */
|
|
#define CD180_COR2_DSRAE 0x01 /* DSR automatic enable */
|
|
|
|
/* Channel Option Register 3 (rw) */
|
|
#define CD180_COR3_XON2 0x80 /* XON char in spc1&3 */
|
|
#define CD180_COR3_XON1 0x00 /* XON char in spc1 */
|
|
#define CD180_COR3_XOFF2 0x40 /* XOFF char in spc2&4 */
|
|
#define CD180_COR3_XOFF1 0x00 /* XOFF char in spc2 */
|
|
#define CD180_COR3_FCT 0x20 /* flow control transparency */
|
|
#define CD180_COR3_SCDE 0x10 /* special char recognition */
|
|
#define CD180_COR3_RXFIFO_MASK 0x0f /* rx fifo threshold */
|
|
|
|
/* Channel Control Status Register (ro) */
|
|
#define CD180_CCSR_RXEN 0x80 /* rx is enabled */
|
|
#define CD180_CCSR_RXFLOFF 0x40 /* rx flow-off */
|
|
#define CD180_CCSR_RXFLON 0x20 /* rx flow-on */
|
|
#define CD180_CCSR_TXEN 0x08 /* tx is enabled */
|
|
#define CD180_CCSR_TXFLOFF 0x04 /* tx flow-off */
|
|
#define CD180_CCSR_TXFLON 0x02 /* tx flow-on */
|
|
|
|
/* Receiver Bit Register (ro) */
|
|
#define CD180_RBR_RXD 0x40 /* state of RxD pin */
|
|
#define CD180_RBR_STARTHUNT 0x20 /* looking for start bit */
|
|
|
|
/* Modem Change Register (rw) */
|
|
#define CD180_MCR_DSR 0x80 /* DSR changed */
|
|
#define CD180_MCR_CD 0x40 /* CD changed */
|
|
#define CD180_MCR_CTS 0x20 /* CTS changed */
|
|
|
|
/* Modem Change Option Register 1 (rw) */
|
|
#define CD180_MCOR1_DSRZD 0x80 /* catch 0->1 DSR changes */
|
|
#define CD180_MCOR1_CDZD 0x40 /* catch 0->1 CD changes */
|
|
#define CD180_MCOR1_CTSZD 0x40 /* catch 0->1 CTS changes */
|
|
#define CD180_MCOR1_DTRTHRESH 0x0f /* DTR threshold mask */
|
|
|
|
/* Modem Change Option Register 2 (rw) */
|
|
#define CD180_MCOR2_DSROD 0x80 /* catch 1->0 DSR changes */
|
|
#define CD180_MCOR2_CDOD 0x40 /* catch 1->0 CD changes */
|
|
#define CD180_MCOR2_CTSOD 0x20 /* catch 1->0 CTS changes */
|
|
|
|
/* Modem Signal Value Register (rw) */
|
|
#define CD180_MSVR_DSR 0x80 /* DSR input state */
|
|
#define CD180_MSVR_CD 0x40 /* CD input state */
|
|
#define CD180_MSVR_CTS 0x20 /* CTS input state */
|
|
#define CD180_MSVR_DTR 0x02 /* DTR output state */
|
|
#define CD180_MSVR_RTS 0x01 /* RTS output state */
|
|
|
|
/* Modem Signal Value Register - Request To Send (w) (CD180C and higher) */
|
|
#define CD180_MSVRTS_RTS 0x01 /* RTS signal value */
|
|
|
|
/* Modem Signal Value Register - Data Terminal Ready (w) (CD180C and higher) */
|
|
#define CD180_MSVDTR_DTR 0x02 /* DTR signal value */
|
|
|
|
/*
|
|
* The register map for the SUNW,spif looks something like:
|
|
* Offset: Function:
|
|
* 0000 - 03ff Boot ROM
|
|
* 0400 - 0407 dtr latches (one per port)
|
|
* 0409 - 07ff unused
|
|
* 0800 - 087f CD180 registers (normal mapping)
|
|
* 0880 - 0bff unused
|
|
* 0c00 - 0c7f CD180 registers (*iack mapping)
|
|
* 0c80 - 0dff unused
|
|
* 0e00 - 1fff PPC registers
|
|
*
|
|
* One note about the DTR latches: The values stored there are reversed.
|
|
* By writing a 1 to the latch, DTR is lowered, and by writing a 0, DTR
|
|
* is raised. The latches cannot be read, and no other value can be written
|
|
* there or the system will crash due to "excessive bus loading (see
|
|
* SBus loading and capacitance spec)"
|
|
*
|
|
* The *iack registers are read/written with the IACK bit set. When
|
|
* the interrupt routine starts, it reads the MRAR, TRAR, and RRAR registers
|
|
* from this mapping. This signals an interrupt acknowledgement cycle.
|
|
* (NOTE: these are not really the MRAR, TRAR, and RRAR... They are copies
|
|
* of the GSVR, I just mapped them to the same location as the mrar, trar,
|
|
* and rrar because it seemed appropriate).
|
|
*/
|
|
#define DTR_REG_OFFSET 0x400 /* DTR latches */
|
|
#define DTR_REG_LEN 0x8
|
|
#define STC_REG_OFFSET 0x800 /* normal cd180 access */
|
|
#define STC_REG_LEN 0x80
|
|
#define ISTC_REG_OFFSET 0xc00 /* IACK cd180 access */
|
|
#define ISTC_REG_LEN STC_REG_LEN
|
|
#define PPC_REG_OFFSET 0xe00 /* PPC registers */
|
|
#define PPC_REG_LEN 0x200
|
|
|
|
/*
|
|
* The mapping of minor device number -> card and port is done as
|
|
* follows by default:
|
|
*
|
|
* +---+---+---+---+---+---+---+---+
|
|
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
|
* +---+---+---+---+---+---+---+---+
|
|
* | | | | | | | |
|
|
* | | | | | +---+---+---> port number
|
|
* | | | | |
|
|
* | | | | +---------------> unused
|
|
* | | | |
|
|
* | | | +-------------------> dialout (on tty ports)
|
|
* | | |
|
|
* | | +-----------------------> unused
|
|
* | |
|
|
* +---+---------------------------> card number
|
|
*
|
|
*/
|
|
#define SPIF_MAX_CARDS 4
|
|
#define SPIF_MAX_TTY 8
|
|
#define SPIF_MAX_BPP 1
|
|
|
|
/*
|
|
* device selectors
|
|
*/
|
|
#define SPIF_CARD(x) ((minor(x) >> 6) & 0x03)
|
|
#define SPIF_PORT(x) (minor(x) & 0x07)
|
|
#define STTY_DIALOUT(x) (minor(x) & 0x10)
|
|
|
|
#define STTY_RX_FIFO_THRESHOLD 4
|
|
#define STTY_RX_DTR_THRESHOLD 7
|
|
#define CD180_TX_FIFO_SIZE 8 /* 8 chars of fifo */
|
|
|
|
/*
|
|
* These are the offsets of the MRAR, TRAR, and RRAR in *IACK space.
|
|
* The high bit must be set as per specs for the MSMR, TSMR, and RSMR.
|
|
*/
|
|
#define SPIF_MSMR (0x80 | STC_MRAR) /* offset of MRAR | 0x80 */
|
|
#define SPIF_TSMR (0x80 | STC_TRAR) /* offset of TRAR | 0x80 */
|
|
#define SPIF_RSMR (0x80 | STC_RRAR) /* offset of RRAR | 0x80 */
|
|
|
|
/*
|
|
* "verosc" node tells which oscillator we have.
|
|
*/
|
|
#define SPIF_OSC9 1 /* 9.8304 MHz */
|
|
#define SPIF_OSC10 2 /* 10MHz */
|
|
|
|
/*
|
|
* There are two interrupts, serial gets interrupt[0], and parallel
|
|
* gets interrupt[1]
|
|
*/
|
|
#define SERIAL_INTR 0
|
|
#define PARALLEL_INTR 1
|
|
|
|
/*
|
|
* spif tty flags
|
|
*/
|
|
#define STTYF_CDCHG 0x01 /* carrier changed */
|
|
#define STTYF_RING_OVERFLOW 0x02 /* ring buffer overflowed */
|
|
#define STTYF_DONE 0x04 /* done... flush buffers */
|
|
#define STTYF_SET_BREAK 0x08 /* set break signal */
|
|
#define STTYF_CLR_BREAK 0x10 /* clear break signal */
|
|
#define STTYF_STOP 0x20 /* stopped */
|
|
|
|
#define STTY_RBUF_SIZE (2 * 512)
|
|
|
|
/*
|
|
* useful macros
|
|
*/
|
|
#define SET(t, f) ((t) |= (f))
|
|
#define CLR(t, f) ((t) &= ~(f))
|
|
#define ISSET(t, f) ((t) & (f))
|
|
|
|
/*
|
|
* internal function prototypes
|
|
*/
|
|
int spif_match(struct device *, struct cfdata *, void *);
|
|
void spif_attach(struct device *, struct device *, void *);
|
|
|
|
int stty_match(struct device *, struct cfdata *, void *);
|
|
void stty_attach(struct device *, struct device *, void *);
|
|
|
|
int spif_stcintr(void *);
|
|
int spif_stcintr_mx(struct spif_softc *, int *);
|
|
int spif_stcintr_tx(struct spif_softc *, int *);
|
|
int spif_stcintr_rx(struct spif_softc *, int *);
|
|
int spif_stcintr_rxexception(struct spif_softc *, int *);
|
|
void spif_softintr(void *);
|
|
|
|
int stty_param(struct tty *, struct termios *);
|
|
int stty_modem_control(struct stty_port *, int, int);
|
|
void stty_write_ccr(struct spif_softc *, u_int8_t);
|
|
int stty_compute_baud(speed_t, int, u_int8_t *, u_int8_t *);
|
|
void stty_start(struct tty *);
|
|
|
|
int sbpp_match(struct device *, struct cfdata *, void *);
|
|
void sbpp_attach(struct device *, struct device *, void *);
|
|
|
|
int sbpp_rw(dev_t, struct uio *);
|
|
int spif_ppcintr(void *);
|