269 lines
11 KiB
C
269 lines
11 KiB
C
/* $NetBSD: bireg.h,v 1.9 2004/02/13 11:36:20 wiz Exp $ */
|
|
/*
|
|
* Copyright (c) 1988 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Chris Torek.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)bireg.h 7.3 (Berkeley) 6/28/90
|
|
*/
|
|
|
|
/*
|
|
* VAXBI node definitions.
|
|
*/
|
|
|
|
/*
|
|
* BI node addresses
|
|
*/
|
|
#define BI_NODESIZE 0x2000 /* Size of one BI node */
|
|
#define BI_NODE(node) (BI_NODESIZE * (node))
|
|
#define BI_BASE(bi,nod) ((0x20000000 + (bi) * 0x2000000) + BI_NODE(nod))
|
|
#define MAXNBI 16 /* Spec says there can be 16 anyway */
|
|
#define NNODEBI 16 /* 16 nodes per BI */
|
|
|
|
#define BI_PROBE 0x80000 /* CPU on 8200, NBIA on 8800 */
|
|
/*
|
|
* BI nodes all start with BI interface registers (those on the BIIC chip).
|
|
* These are followed with interface-specific registers.
|
|
*
|
|
* NB: This structure does NOT include the four GPRs (not anymore!)
|
|
*
|
|
* 990712: The structs not used anymore due to conversion to bus.h.
|
|
*/
|
|
#ifdef notdef
|
|
struct biiregs {
|
|
u_short bi_dtype; /* device type */
|
|
u_short bi_revs; /* revisions */
|
|
u_long bi_csr; /* control and status register */
|
|
u_long bi_ber; /* bus error register */
|
|
u_long bi_eintrcsr; /* error interrupt control register */
|
|
u_long bi_intrdes; /* interrupt destination register */
|
|
/* the rest are not required for all nodes */
|
|
u_long bi_ipintrmsk; /* IP interrupt mask register */
|
|
u_long bi_fipsdes; /* Force-Bit IPINTR/STOP destination reg */
|
|
u_long bi_ipintrsrc; /* IPINTR source register */
|
|
u_long bi_sadr; /* starting address register */
|
|
u_long bi_eadr; /* ending address register */
|
|
u_long bi_bcicsr; /* BCI control and status register */
|
|
u_long bi_wstat; /* write status register */
|
|
u_long bi_fipscmd; /* Force-Bit IPINTR/STOP command reg */
|
|
u_long bi_xxx1[3]; /* unused */
|
|
u_long bi_uintrcsr; /* user interface interrupt control reg */
|
|
u_long bi_xxx2[43]; /* unused */
|
|
/* although these are on the BIIC, their interpretation varies */
|
|
/* u_long bi_gpr[4]; */ /* general purpose registers */
|
|
};
|
|
|
|
/*
|
|
* A generic BI node.
|
|
*/
|
|
struct bi_node {
|
|
struct biiregs biic; /* interface */
|
|
u_long bi_xxx[1988]; /* pad to 8K */
|
|
};
|
|
|
|
/*
|
|
* A CPU node.
|
|
*/
|
|
struct bi_cpu {
|
|
struct biiregs biic; /* interface chip */
|
|
u_long bi_gpr[4]; /* gprs (unused) */
|
|
u_long bi_sosr; /* slave only status register */
|
|
u_long bi_xxx[63]; /* pad */
|
|
u_long bi_rxcd; /* receive console data register */
|
|
};
|
|
#endif
|
|
|
|
#define BIREG_DTYPE 0x00
|
|
#define BIREG_VAXBICSR 0x04
|
|
#define BIREG_BER 0x08
|
|
#define BIREG_EINTRCSR 0x0c
|
|
#define BIREG_INTRDES 0x10
|
|
#define BIREG_IPINTRMSK 0x14
|
|
#define BIREG_FIPSDES 0x18
|
|
#define BIREG_IPINTRSRC 0x1c
|
|
#define BIREG_SADR 0x20
|
|
#define BIREG_EADR 0x24
|
|
#define BIREG_BCICSR 0x28
|
|
#define BIREG_WSTAT 0x2c
|
|
#define BIREG_FIPSCMD 0x30
|
|
#define BIREG_UINTRCSR 0x40
|
|
|
|
/* device types */
|
|
#define BIDT_MS820 0x0001 /* MS820 memory board */
|
|
#define BIDT_DRB32 0x0101 /* DRB32 (MFA) Supercomputer gateway */
|
|
#define BIDT_DWBUA 0x0102 /* DWBUA Unibus adapter */
|
|
#define BIDT_KLESI 0x0103 /* KLESI-B (DWBLA) adapter */
|
|
#define BIDT_HSB70 0x4104 /* HSB70 */
|
|
#define BIDT_KA820 0x0105 /* KA820 CPU */
|
|
#define BIDT_DB88 0x0106 /* DB88 (NBI) adapter */
|
|
#define BIDT_DWMBA 0x2107 /* XMI-BI (XBI) adapter */
|
|
#define BIDT_DWMBB 0x0107 /* XMI-BI (XBI) adapter */
|
|
#define BIDT_CIBCA 0x0108 /* Computer Interconnect adapter */
|
|
#define BIDT_DMB32 0x0109 /* DMB32 (COMB) adapter */
|
|
#define BIDT_BAA 0x010a /* BAA */
|
|
#define BIDT_CIBCI 0x010b /* Computer Interconnect adapter (old) */
|
|
#define BIDT_DEBNT 0x410b /* (AIE_TK70) Ethernet+TK50/TBK70 */
|
|
#define BIDT_KA800 0x010c /* KA800 (ACP) slave processor */
|
|
#define BIDT_KFBTA 0x410d /* RD/RX disk controller */
|
|
#define BIDT_KDB50 0x010e /* KDB50 (BDA) disk controller */
|
|
#define BIDT_DEBNK 0x410e /* (AIE_TK) BI Ethernet (Lance) + TK50 */
|
|
#define BIDT_DEBNA 0x410f /* (AIE) BI Ethernet (Lance) adapter */
|
|
#define BIDT_DEBNI 0x0118 /* (XNA) BI Ethernet adapter */
|
|
|
|
|
|
/* bits in bi_csr */
|
|
#define BICSR_IREV(x) ((u_char)((x) >> 24)) /* VAXBI interface rev */
|
|
#define BICSR_TYPE(x) ((u_char)((x) >> 16)) /* BIIC type */
|
|
#define BICSR_HES 0x8000 /* hard error summary */
|
|
#define BICSR_SES 0x4000 /* soft error summary */
|
|
#define BICSR_INIT 0x2000 /* initialise node */
|
|
#define BICSR_BROKE 0x1000 /* broke */
|
|
#define BICSR_STS 0x0800 /* self test status */
|
|
#define BICSR_NRST 0x0400 /* node reset */
|
|
#define BICSR_UWP 0x0100 /* unlock write pending */
|
|
#define BICSR_HEIE 0x0080 /* hard error interrupt enable */
|
|
#define BICSR_SEIE 0x0040 /* soft error interrupt enable */
|
|
#define BICSR_ARB_MASK 0x0030 /* mask to get arbitration codes */
|
|
#define BICSR_ARB_NONE 0x0030 /* no arbitration */
|
|
#define BICSR_ARB_LOG 0x0020 /* low priority */
|
|
#define BICSR_ARB_HIGH 0x0010 /* high priority */
|
|
#define BICSR_ARB_RR 0x0000 /* round robin */
|
|
#define BICSR_NODEMASK 0x000f /* node ID */
|
|
|
|
#define BICSR_BITS \
|
|
"\20\20HES\17SES\16INIT\15BROKE\14STS\13NRST\11UWP\10HEIE\7SEIE"
|
|
|
|
/* bits in bi_ber */
|
|
#define BIBER_MBZ 0x8000fff0
|
|
#define BIBER_NMR 0x40000000 /* no ack to multi-responder command */
|
|
#define BIBER_MTCE 0x20000000 /* master transmit check error */
|
|
#define BIBER_CTE 0x10000000 /* control transmit error */
|
|
#define BIBER_MPE 0x08000000 /* master parity error */
|
|
#define BIBER_ISE 0x04000000 /* interlock sequence error */
|
|
#define BIBER_TDF 0x02000000 /* transmitter during fault */
|
|
#define BIBER_IVE 0x01000000 /* ident vector error */
|
|
#define BIBER_CPE 0x00800000 /* command parity error */
|
|
#define BIBER_SPE 0x00400000 /* slave parity error */
|
|
#define BIBER_RDS 0x00200000 /* read data substitute */
|
|
#define BIBER_RTO 0x00100000 /* retry timeout */
|
|
#define BIBER_STO 0x00080000 /* stall timeout */
|
|
#define BIBER_BTO 0x00040000 /* bus timeout */
|
|
#define BIBER_NEX 0x00020000 /* nonexistent address */
|
|
#define BIBER_ICE 0x00010000 /* illegal confirmation error */
|
|
#define BIBER_UPEN 0x00000008 /* user parity enable */
|
|
#define BIBER_IPE 0x00000004 /* ID parity error */
|
|
#define BIBER_CRD 0x00000002 /* corrected read data */
|
|
#define BIBER_NPE 0x00000001 /* null bus parity error */
|
|
#define BIBER_HARD 0x4fff0000
|
|
|
|
#define BIBER_BITS \
|
|
"\20\37NMR\36MTCE\35CTE\34MPE\33ISE\32TDF\31IVE\30CPE\
|
|
\27SPE\26RDS\25RTO\24STO\23BTO\22NEX\21ICE\4UPEN\3IPE\2CRD\1NPE"
|
|
|
|
/* bits in bi_eintrcsr */
|
|
#define BIEIC_INTRAB 0x01000000 /* interrupt abort */
|
|
#define BIEIC_INTRC 0x00800000 /* interrupt complete */
|
|
#define BIEIC_INTRSENT 0x00200000 /* interrupt command sent */
|
|
#define BIEIC_INTRFORCE 0x00100000 /* interrupt force */
|
|
#define BIEIC_LEVELMASK 0x000f0000 /* mask for interrupt levels */
|
|
#define BIEIC_IPL17 0x00080000 /* ipl 0x17 */
|
|
#define BIEIC_IPL16 0x00040000 /* ipl 0x16 */
|
|
#define BIEIC_IPL15 0x00020000 /* ipl 0x15 */
|
|
#define BIEIC_IPL14 0x00010000 /* ipl 0x14 */
|
|
#define BIEIC_VECMASK 0x00003ffc /* vector mask for error intr */
|
|
|
|
/* bits in bi_intrdes */
|
|
#define BIDEST_MASK 0x0000ffff /* one bit per node to be intr'ed */
|
|
|
|
/* bits in bi_ipintrmsk */
|
|
#define BIIPINTR_MASK 0xffff0000 /* one per node to allow to ipintr */
|
|
|
|
/* bits in bi_fipsdes */
|
|
#define BIFIPSD_MASK 0x0000ffff
|
|
|
|
/* bits in bi_ipintrsrc */
|
|
#define BIIPSRC_MASK 0xffff0000
|
|
|
|
/* sadr and eadr are simple addresses */
|
|
|
|
/* bits in bi_bcicsr */
|
|
#define BCI_BURSTEN 0x00020000 /* burst mode enable */
|
|
#define BCI_IPSTOP_FRC 0x00010000 /* ipintr/stop force */
|
|
#define BCI_MCASTEN 0x00008000 /* multicast space enable */
|
|
#define BCI_BCASTEN 0x00004000 /* broadcast enable */
|
|
#define BCI_STOPEN 0x00002000 /* stop enable */
|
|
#define BCI_RSRVDEN 0x00001000 /* reserved enable */
|
|
#define BCI_IDENTEN 0x00000800 /* ident enable */
|
|
#define BCI_INVALEN 0x00000400 /* inval enable */
|
|
#define BCI_WINVEN 0x00000200 /* write invalidate enable */
|
|
#define BCI_UINTEN 0x00000100 /* user interface csr space enable */
|
|
#define BCI_BIICEN 0x00000080 /* BIIC csr space enable */
|
|
#define BCI_INTEN 0x00000040 /* interrupt enable */
|
|
#define BCI_IPINTEN 0x00000020 /* ipintr enable */
|
|
#define BCI_PIPEEN 0x00000010 /* pipeline NXT enable */
|
|
#define BCI_RTOEVEN 0x00000008 /* read timeout EV enable */
|
|
|
|
#define BCI_BITS \
|
|
"\20\22BURSTEN\21IPSTOP_FRC\20MCASTEN\
|
|
\17BCASTEN\16STOPEN\15RSRVDEN\14IDENTEN\13INVALEN\12WINVEN\11UINTEN\
|
|
\10BIICEN\7INTEN\6IPINTEN\5PIPEEN\4RTOEVEN"
|
|
|
|
/* bits in bi_wstat */
|
|
#define BIW_GPR3 0x80000000 /* gpr 3 was written */
|
|
#define BIW_GPR2 0x40000000 /* gpr 2 was written */
|
|
#define BIW_GPR1 0x20000000 /* gpr 1 was written */
|
|
#define BIW_GPR0 0x10000000 /* gpr 0 was written */
|
|
|
|
/* bits in force-bit ipintr/stop command register */
|
|
#define BIFIPSC_CMDMASK 0x0000f000 /* command */
|
|
#define BIFIPSC_MIDEN 0x00000800 /* master ID enable */
|
|
|
|
/* bits in bi_uintcsr */
|
|
#define BIUI_INTAB 0xf0000000 /* interrupt abort level */
|
|
#define BIUI_INTC 0x0f000000 /* interrupt complete bits */
|
|
#define BIUI_SENT 0x00f00000 /* interrupt sent bits */
|
|
#define BIUI_FORCE 0x000f0000 /* force interrupt level */
|
|
#define BIUI_EVECEN 0x00008000 /* external vector enable */
|
|
#define BIUI_VEC 0x00003ffc /* interrupt vector */
|
|
|
|
/* tell if a bi device is a slave (hence has SOSR) */
|
|
#define BIDT_ISSLAVE(x) (((x) & 0x7f00) == 0)
|
|
|
|
/* bits in bi_sosr */
|
|
#define BISOSR_MEMSIZE 0x1ffc0000 /* memory size */
|
|
#define BISOSR_BROKE 0x00001000 /* broke */
|
|
|
|
/* bits in bi_rxcd */
|
|
#define BIRXCD_BUSY2 0x80000000 /* busy 2 */
|
|
#define BIRXCD_NODE2 0x0f000000 /* node id 2 */
|
|
#define BIRXCD_CHAR2 0x00ff0000 /* character 2 */
|
|
#define BIRXCD_BUSY1 0x00008000 /* busy 1 */
|
|
#define BIRXCD_NODE1 0x00000f00 /* node id 1 */
|
|
#define BIRXCD_CHAR1 0x000000ff /* character 1 */
|