273 lines
9.9 KiB
Perl
273 lines
9.9 KiB
Perl
.\" $NetBSD: 5.t,v 1.1 2007/12/18 03:35:53 garbled Exp $
|
|
.\" Copyright (c) 1983, 1993
|
|
.\" The Regents of the University of California. All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by the University of
|
|
.\" California, Berkeley and its contributors.
|
|
.\" 4. Neither the name of the University nor the names of its contributors
|
|
.\" may be used to endorse or promote products derived from this software
|
|
.\" without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" @(#)5.t 8.1 (Berkeley) 6/8/93
|
|
.\"
|
|
.\".ds RH "Sample Configuration Files
|
|
.ne 2i
|
|
.NH
|
|
SAMPLE CONFIGURATION FILES
|
|
.PP
|
|
In this section we will consider how to configure a
|
|
sample VAX-11/780 system on which the hardware can be
|
|
reconfigured to guard against various hardware mishaps.
|
|
We then study the rules needed to configure a VAX-11/750
|
|
to run in a networking environment.
|
|
.NH 2
|
|
VAX-11/780 System
|
|
.PP
|
|
Our VAX-11/780 is configured with hardware
|
|
recommended in the document ``Hints on Configuring a VAX for 4.2BSD''
|
|
(this is one of the high-end configurations).
|
|
Table 1 lists the pertinent hardware to be configured.
|
|
.DS B
|
|
.TS
|
|
box;
|
|
l | l | l | l | l
|
|
l | l | l | l | l.
|
|
Item Vendor Connection Name Reference
|
|
_
|
|
cpu DEC VAX780
|
|
MASSBUS controller Emulex nexus ? mba0 hp(4)
|
|
disk Fujitsu mba0 hp0
|
|
disk Fujitsu mba0 hp1
|
|
MASSBUS controller Emulex nexus ? mba1
|
|
disk Fujitsu mba1 hp2
|
|
disk Fujitsu mba1 hp3
|
|
UNIBUS adapter DEC nexus ?
|
|
tape controller Emulex uba0 tm0 tm(4)
|
|
tape drive Kennedy tm0 te0
|
|
tape drive Kennedy tm0 te1
|
|
terminal multiplexor Emulex uba0 dh0 dh(4)
|
|
terminal multiplexor Emulex uba0 dh1
|
|
terminal multiplexor Emulex uba0 dh2
|
|
.TE
|
|
.DE
|
|
.ce
|
|
Table 1. VAX-11/780 Hardware support.
|
|
.LP
|
|
We will call this machine ANSEL and construct a configuration
|
|
file one step at a time.
|
|
.PP
|
|
The first step is to fill in the global configuration parameters.
|
|
The machine is a VAX, so the
|
|
.I "machine type"
|
|
is ``vax''. We will assume this system will
|
|
run only on this one processor, so the
|
|
.I "cpu type"
|
|
is ``VAX780''. The options are empty since this is going to
|
|
be a ``vanilla'' VAX. The system identifier, as mentioned before,
|
|
is ``ANSEL,'' and the maximum number of users we plan to support is
|
|
about 40. Thus the beginning of the configuration file looks like
|
|
this:
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
#
|
|
# ANSEL VAX (a picture perfect machine)
|
|
#
|
|
machine vax
|
|
cpu VAX780
|
|
timezone 8 dst
|
|
ident ANSEL
|
|
maxusers 40
|
|
.DE
|
|
.PP
|
|
To this we must then add the specifications for three
|
|
system images. The first will be our standard system with the
|
|
root on ``hp0'' and swapping on the same drive as the root.
|
|
The second will have the root file system in the same location,
|
|
but swap space interleaved among drives on each controller.
|
|
Finally, the third will be a generic system,
|
|
to allow us to boot off any of the four disk drives.
|
|
.DS
|
|
.ta 1.5i 2.5i
|
|
config kernel root on hp0
|
|
config hpkernel root on hp0 swap on hp0 and hp2
|
|
config genkernel swap generic
|
|
.DE
|
|
.PP
|
|
Finally, the hardware must be specified. Let us first just try
|
|
transcribing the information from Table 1.
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
controller mba0 at nexus ?
|
|
disk hp0 at mba0 disk 0
|
|
disk hp1 at mba0 disk 1
|
|
controller mba1 at nexus ?
|
|
disk hp2 at mba1 disk 2
|
|
disk hp3 at mba1 disk 3
|
|
controller uba0 at nexus ?
|
|
controller tm0 at uba0 csr 0172520 vector tmintr
|
|
tape te0 at tm0 drive 0
|
|
tape te1 at tm0 drive 1
|
|
device dh0 at uba0 csr 0160020 vector dhrint dhxint
|
|
device dm0 at uba0 csr 0170500 vector dmintr
|
|
device dh1 at uba0 csr 0160040 vector dhrint dhxint
|
|
device dh2 at uba0 csr 0160060 vector dhrint dhxint
|
|
.DE
|
|
.LP
|
|
(Oh, I forgot to mention one panel of the terminal multiplexor
|
|
has modem control, thus the ``dm0'' device.)
|
|
.PP
|
|
This will suffice, but leaves us with little flexibility. Suppose
|
|
our first disk controller were to break. We would like to recable the
|
|
drives normally on the second controller so that all our disks could
|
|
still be used without reconfiguring the system. To do this we wildcard
|
|
the MASSBUS adapter connections and also the slave numbers. Further,
|
|
we wildcard the UNIBUS adapter connections in case we decide some time
|
|
in the future to purchase another adapter to offload the single UNIBUS
|
|
we currently have. The revised device specifications would then be:
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
controller mba0 at nexus ?
|
|
disk hp0 at mba? disk ?
|
|
disk hp1 at mba? disk ?
|
|
controller mba1 at nexus ?
|
|
disk hp2 at mba? disk ?
|
|
disk hp3 at mba? disk ?
|
|
controller uba0 at nexus ?
|
|
controller tm0 at uba? csr 0172520 vector tmintr
|
|
tape te0 at tm0 drive 0
|
|
tape te1 at tm0 drive 1
|
|
device dh0 at uba? csr 0160020 vector dhrint dhxint
|
|
device dm0 at uba? csr 0170500 vector dmintr
|
|
device dh1 at uba? csr 0160040 vector dhrint dhxint
|
|
device dh2 at uba? csr 0160060 vector dhrint dhxint
|
|
.DE
|
|
.LP
|
|
The completed configuration file for ANSEL is shown in Appendix C.
|
|
.NH 2
|
|
VAX-11/750 with network support
|
|
.PP
|
|
Our VAX-11/750 system will be located on two 10Mb/s Ethernet
|
|
local area networks and also the DARPA Internet. The system
|
|
will have a MASSBUS drive for the root file system and two
|
|
UNIBUS drives. Paging is interleaved among all three drives.
|
|
We have sold our standard DEC terminal multiplexors since this
|
|
machine will be accessed solely through the network. This
|
|
machine is not intended to have a large user community, it
|
|
does not have a great deal of memory. First the global parameters:
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
#
|
|
# UCBVAX (Gateway to the world)
|
|
#
|
|
machine vax
|
|
cpu "VAX780"
|
|
cpu "VAX750"
|
|
ident UCBVAX
|
|
timezone 8 dst
|
|
maxusers 32
|
|
options INET
|
|
options NS
|
|
.DE
|
|
.PP
|
|
The multiple cpu types allow us to replace UCBVAX with a
|
|
more powerful cpu without reconfiguring the system. The
|
|
value of 32 given for the maximum number of users is done to
|
|
force the system data structures to be over-allocated. That
|
|
is desirable on this machine because, while it is not expected
|
|
to support many users, it is expected to perform a great deal
|
|
of work.
|
|
The ``INET'' indicates that we plan to use the
|
|
DARPA standard Internet protocols on this machine,
|
|
and ``NS'' also includes support for Xerox NS protocols.
|
|
Note that unlike 4.2BSD configuration files,
|
|
the network protocol options do not require corresponding pseudo devices.
|
|
.PP
|
|
The system images and disks are configured next.
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
config kernel root on hp swap on hp and rk0 and rk1
|
|
config upkernel root on up
|
|
config hkkernel root on hk swap on rk0 and rk1
|
|
|
|
controller mba0 at nexus ?
|
|
controller uba0 at nexus ?
|
|
disk hp0 at mba? drive 0
|
|
disk hp1 at mba? drive 1
|
|
controller sc0 at uba? csr 0176700 vector upintr
|
|
disk up0 at sc0 drive 0
|
|
disk up1 at sc0 drive 1
|
|
controller hk0 at uba? csr 0177440 vector rkintr
|
|
disk rk0 at hk0 drive 0
|
|
disk rk1 at hk0 drive 1
|
|
.DE
|
|
.PP
|
|
UCBVAX requires heavy interleaving of its paging area to keep up
|
|
with all the mail traffic it handles. The limiting factor on this
|
|
system's performance is usually the number of disk arms, as opposed
|
|
to memory or cpu cycles. The extra UNIBUS controller, ``sc0'',
|
|
is in case the MASSBUS controller breaks and a spare controller
|
|
must be installed (most of our old UNIBUS controllers have been
|
|
replaced with the newer MASSBUS controllers, so we have a number
|
|
of these around as spares).
|
|
.PP
|
|
Finally, we add in the network devices.
|
|
Pseudo terminals are needed to allow users to
|
|
log in across the network (remember the only hardwired terminal
|
|
is the console).
|
|
The software loopback device is used for on-machine communications.
|
|
The connection to the Internet is through
|
|
an IMP, this requires yet another
|
|
.I pseudo-device
|
|
(in addition to the actual hardware device used by the
|
|
IMP software). And, finally, there are the two Ethernet devices.
|
|
These use a special protocol, the Address Resolution Protocol (ARP),
|
|
to map between Internet and Ethernet addresses. Thus, yet another
|
|
.I pseudo-device
|
|
is needed. The additional device specifications are show below.
|
|
.DS
|
|
.ta 1.5i 2.5i 4.0i
|
|
pseudo-device pty
|
|
pseudo-device loop
|
|
pseudo-device imp
|
|
device acc0 at uba? csr 0167600 vector accrint accxint
|
|
pseudo-device ether
|
|
device ec0 at uba? csr 0164330 vector ecrint eccollide ecxint
|
|
device il0 at uba? csr 0164000 vector ilrint ilcint
|
|
.DE
|
|
.LP
|
|
The completed configuration file for UCBVAX is shown in Appendix C.
|
|
.NH 2
|
|
Miscellaneous comments
|
|
.PP
|
|
It should be noted in these examples that neither system was
|
|
configured to use disk quotas or the 4.1BSD compatibility mode.
|
|
To use these optional facilities, and others, we would probably
|
|
clean out our current configuration, reconfigure the system, then
|
|
recompile and relink the system image(s). This could, of course,
|
|
be avoided by figuring out which relocatable object files are
|
|
affected by the reconfiguration, then reconfiguring and recompiling
|
|
only those files affected by the configuration change. This technique
|
|
should be used carefully.
|