NetBSD/sys/dev/isa/isic_isa_itk_ix1.c

497 lines
14 KiB
C

/*
* Copyright (c) 1998, 1999, 2001 Martin Husemann <martin@duskware.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_itk_ix1.c - ITK ix1 micro passive card driver for isdn4bsd
* --------------------------------------------------------------
*
* $Id: isic_isa_itk_ix1.c,v 1.2 2001/02/20 22:24:38 martin Exp $
*
* last edit-date: [Fri Jan 5 12:31:50 2001]
*
* mh - created
* mh - fixed FreeBSD problems reported by Kevin Sheehan
* mh - added probe routine
*
*---------------------------------------------------------------------------
*
* The ITK ix1 micro ISDN card is an ISA card with one region
* of four io ports mapped and a fixed irq all jumpered on the card.
* Access to the board is straight forward and simmilar to
* the ELSA and DYNALINK cards. If a PCI version of this card
* exists all we need is probably a pci-bus attachment, all
* this low level routines should work imediately.
*
* To reset the card:
* - write 0x01 to ITK_CONFIG
* - wait >= 10 ms
* - write 0x00 to ITK_CONFIG
*
* To read or write data:
* - write address to ITK_ALE port
* - read data from or write data to ITK_ISAC_DATA port or ITK_HSCX_DATA port
* The two HSCX channel registers are offset by HSCXA (0x00) and HSCXB (0x40).
*
* The probe routine was derived by trial and error from a representative
* sample of two cards ;-) The standard way (checking HSCX versions)
* was extended by reading a zero from a non existant HSCX register (register
* 0xff). Reading the config register gives varying results, so this doesn't
* seem to be used as an id register (like the Teles S0/16.3).
*
* If the probe fails for your card use "options ITK_PROBE_DEBUG" to get
* additional debug output.
*
*---------------------------------------------------------------------------*/
#include "opt_isicisa.h"
#ifdef ISICISA_ITKIX1
#include <sys/param.h>
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
#include <sys/ioccom.h>
#else
#include <sys/ioctl.h>
#endif
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000
#include <sys/callout.h>
#endif
#ifdef __FreeBSD__
#include <machine/clock.h>
#include <i386/isa/isa_device.h>
#else
#include <machine/bus.h>
#include <sys/device.h>
#endif
#include <sys/socket.h>
#include <net/if.h>
#ifdef __FreeBSD__
#include <machine/i4b_debug.h>
#include <machine/i4b_ioctl.h>
#else
#include <netisdn/i4b_debug.h>
#include <netisdn/i4b_ioctl.h>
#endif
#include <dev/ic/isic_l1.h>
#include <dev/ic/isac.h>
#include <dev/ic/hscx.h>
#include <netisdn/i4b_global.h>
/* Register offsets */
#define ITK_ISAC_DATA 0
#define ITK_HSCX_DATA 1
#define ITK_ALE 2
#define ITK_CONFIG 3
/* Size of IO range to allocate for this card */
#define ITK_IO_SIZE 4
/* Register offsets for the two HSCX channels */
#define HSCXA 0
#define HSCXB 0x40
/*
* Local function prototypes
*/
#ifdef __FreeBSD__
/* FreeBSD version */
static void itkix1_read_fifo(void *buf, const void *base, size_t len);
static void itkix1_write_fifo(void *base, const void *buf, size_t len);
static void itkix1_write_reg(u_char *base, u_int offset, u_int v);
static u_char itkix1_read_reg(u_char *base, u_int offset);
#else
/* NetBSD/OpenBSD version */
static void itkix1_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size);
static void itkix1_write_fifo(struct l1_softc *sc, int what, const void *buf, size_t size);
static void itkix1_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data);
static u_int8_t itkix1_read_reg(struct l1_softc *sc, int what, bus_size_t offs);
#endif
/*
* Probe for card
*/
#ifdef __FreeBSD__
int
isic_probe_itkix1(struct isa_device *dev)
{
u_int8_t hd, hv1, hv2, saveale;
int ret;
/* save old value of this port, we're stomping over it */
saveale = inb(dev->id_iobase + ITK_ALE);
/* select invalid register */
outb(dev->id_iobase + ITK_ALE, 0xff);
/* get HSCX data for this non existent register */
hd = inb(dev->id_iobase + ITK_HSCX_DATA);
/* get HSCX version info */
outb(dev->id_iobase + ITK_ALE, HSCXA + H_VSTR);
hv1 = inb(dev->id_iobase + ITK_HSCX_DATA);
outb(dev->id_iobase + ITK_ALE, HSCXB + H_VSTR);
hv2 = inb(dev->id_iobase + ITK_HSCX_DATA);
/* succeed if version bits are OK and we got a zero from the
* non existent register. we found verison 0x05 and 0x04
* out there... */
ret = (hd == 0)
&& (((hv1 & 0x0f) == 0x05) || ((hv1 & 0x0f) == 0x04))
&& (((hv2 & 0x0f) == 0x05) || ((hv2 & 0x0f) == 0x04));
/* retstore save value if we fail (if we succeed the old value
* has no meaning) */
if (!ret)
outb(dev->id_iobase + ITK_ALE, saveale);
#ifdef ITK_PROBE_DEBUG
printf("\nITK ix1 micro probe: hscx = 0x%02x, v1 = 0x%02x, v2 = 0x%02x, would have %s\n",
hd, hv1, hv2, ret ? "succeeded" : "failed");
return 1;
#else
return ret;
#endif
}
#else
int
isic_probe_itkix1(struct isic_attach_args *ia)
{
bus_space_tag_t t = ia->ia_maps[0].t;
bus_space_handle_t h = ia->ia_maps[0].h;
u_int8_t hd, hv1, hv2, saveale;
int ret;
/* save old value of this port, we're stomping over it */
saveale = bus_space_read_1(t, h, ITK_ALE);
/* select invalid register */
bus_space_write_1(t, h, ITK_ALE, 0xff);
/* get HSCX data for this non existent register */
hd = bus_space_read_1(t, h, ITK_HSCX_DATA);
/* get HSCX version info */
bus_space_write_1(t, h, ITK_ALE, HSCXA + H_VSTR);
hv1 = bus_space_read_1(t, h, ITK_HSCX_DATA);
bus_space_write_1(t, h, ITK_ALE, HSCXB + H_VSTR);
hv2 = bus_space_read_1(t, h, ITK_HSCX_DATA);
ret = (hd == 0) && ((hv1 & 0x0f) == 0x05) && ((hv2 & 0x0f) == 0x05);
/* succeed if version bits are OK and we got a zero from the
* non existent register. we found verison 0x05 and 0x04
* out there... */
ret = (hd == 0)
&& (((hv1 & 0x0f) == 0x05) || ((hv1 & 0x0f) == 0x04))
&& (((hv2 & 0x0f) == 0x05) || ((hv2 & 0x0f) == 0x04));
/* retstore save value if we fail (if we succeed the old value
* has no meaning) */
if (!ret)
bus_space_write_1(t, h, ITK_ALE, saveale);
#ifdef ITK_PROBE_DEBUG
printf("\nITK ix1 micro probe: hscx = 0x%02x, v1 = 0x%02x, v2 = 0x%02x, would have %s\n",
hd, hv1, hv2, ret ? "succeeded" : "failed");
return 1;
#else
return ret;
#endif
}
#endif
/*
* Attach card
*/
#ifdef __FreeBSD__
int
isic_attach_itkix1(struct isa_device *dev)
{
struct l1_softc *sc = &l1_sc[dev->id_unit];
u_int8_t hv1, hv2;
sc->sc_irq = dev->id_irq;
dev->id_msize = 0;
/* check if we got an iobase */
sc->sc_port = dev->id_iobase;
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = itkix1_read_reg;
sc->writereg = itkix1_write_reg;
sc->readfifo = itkix1_read_fifo;
sc->writefifo = itkix1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* setup ISAC and HSCX base addr */
ISAC_BASE = (caddr_t) sc->sc_port;
HSCX_A_BASE = (caddr_t) sc->sc_port + 1;
HSCX_B_BASE = (caddr_t) sc->sc_port + 2;
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1) or 0x04 (V2.0). */
hv1 = HSCX_READ(0, H_VSTR) & 0xf;
hv2 = HSCX_READ(1, H_VSTR) & 0xf;
if((hv1 != 0x05 && hv1 != 0x04) || (hv2 != 0x05 && hv2 != 0x04))
{
printf("isic%d: HSCX VSTR test failed for ITK ix1 micro\n",
dev->id_unit);
printf("isic%d: HSC0: VSTR: %#x\n",
dev->id_unit, HSCX_READ(0, H_VSTR));
printf("isic%d: HSC1: VSTR: %#x\n",
dev->id_unit, HSCX_READ(1, H_VSTR));
return (0);
}
outb((dev->id_iobase)+ITK_CONFIG, 1);
DELAY(SEC_DELAY / 10);
outb((dev->id_iobase)+ITK_CONFIG, 0);
DELAY(SEC_DELAY / 10);
return(1);
}
#else
int isic_attach_itkix1(struct l1_softc *sc)
{
u_int8_t hv1, hv2;
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = itkix1_read_reg;
sc->writereg = itkix1_write_reg;
sc->readfifo = itkix1_read_fifo;
sc->writefifo = itkix1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1) or 0x04 (V2.0). */
hv1 = HSCX_READ(0, H_VSTR) & 0xf;
hv2 = HSCX_READ(2, H_VSTR) & 0xf;
if((hv1 != 0x05 && hv1 != 0x04) || (hv2 != 0x05 && hv2 != 0x04))
{
printf("%s: HSCX VSTR test failed for ITK ix1 micro\n",
sc->sc_dev.dv_xname);
printf("%s: HSC0: VSTR: %#x\n",
sc->sc_dev.dv_xname, HSCX_READ(0, H_VSTR));
printf("%s: HSC1: VSTR: %#x\n",
sc->sc_dev.dv_xname, HSCX_READ(1, H_VSTR));
return 0;
}
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ITK_CONFIG, 1);
DELAY(SEC_DELAY / 10);
bus_space_write_1(sc->sc_maps[0].t, sc->sc_maps[0].h, ITK_CONFIG, 0);
DELAY(SEC_DELAY / 10);
return 1;
}
#endif
#ifdef __FreeBSD__
static void
itkix1_read_fifo(void *buf, const void *base, size_t len)
{
u_int port = (u_int)base & ~0x0003;
switch ((u_int)base & 3) {
case 0: /* ISAC */
outb(port+ITK_ALE, 0);
insb(port+ITK_ISAC_DATA, (u_char *)buf, (u_int)len);
break;
case 1: /* HSCXA */
outb(port+ITK_ALE, HSCXA);
insb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
break;
case 2: /* HSCXB */
outb(port+ITK_ALE, HSCXB);
insb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
break;
}
}
#else
static void
itkix1_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = sc->sc_maps[0].t;
bus_space_handle_t h = sc->sc_maps[0].h;
switch (what) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, 0);
bus_space_read_multi_1(t, h, ITK_ISAC_DATA, buf, size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA);
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB);
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
break;
}
}
#endif
#ifdef __FreeBSD__
static void
itkix1_write_fifo(void *base, const void *buf, size_t len)
{
u_int port = (u_int)base & ~0x0003;
switch ((u_int)base & 3) {
case 0: /* ISAC */
outb(port+ITK_ALE, 0);
outsb(port+ITK_ISAC_DATA, (u_char *)buf, (u_int)len);
break;
case 1: /* HSCXA */
outb(port+ITK_ALE, HSCXA);
outsb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
break;
case 2: /* HSCXB */
outb(port+ITK_ALE, HSCXB);
outsb(port+ITK_HSCX_DATA, (u_char *)buf, (u_int)len);
break;
}
}
#else
static void itkix1_write_fifo(struct l1_softc *sc, int what, const void *buf, size_t size)
{
bus_space_tag_t t = sc->sc_maps[0].t;
bus_space_handle_t h = sc->sc_maps[0].h;
switch (what) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, 0);
bus_space_write_multi_1(t, h, ITK_ISAC_DATA, (u_int8_t*)buf, size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA);
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB);
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
break;
}
}
#endif
#ifdef __FreeBSD__
static void
itkix1_write_reg(u_char *base, u_int offset, u_int v)
{
u_int port = (u_int)base & ~0x0003;
switch ((u_int)base & 3) {
case 0: /* ISAC */
outb(port+ITK_ALE, offset);
outb(port+ITK_ISAC_DATA, (u_char)v);
break;
case 1: /* HSCXA */
outb(port+ITK_ALE, HSCXA+offset);
outb(port+ITK_HSCX_DATA, (u_char)v);
break;
case 2: /* HSCXB */
outb(port+ITK_ALE, HSCXB+offset);
outb(port+ITK_HSCX_DATA, (u_char)v);
break;
}
}
#else
static void itkix1_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
bus_space_tag_t t = sc->sc_maps[0].t;
bus_space_handle_t h = sc->sc_maps[0].h;
switch (what) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, offs);
bus_space_write_1(t, h, ITK_ISAC_DATA, data);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
break;
}
}
#endif
#ifdef __FreeBSD__
static u_char
itkix1_read_reg(u_char *base, u_int offset)
{
u_int port = (u_int)base & ~0x0003;
switch ((u_int)base & 3) {
case 0: /* ISAC */
outb(port+ITK_ALE, offset);
return (inb(port+ITK_ISAC_DATA));
case 1: /* HSCXA */
outb(port+ITK_ALE, HSCXA+offset);
return (inb(port+ITK_HSCX_DATA));
case 2: /* HSCXB */
outb(port+ITK_ALE, HSCXB+offset);
return (inb(port+ITK_HSCX_DATA));
}
}
#else
static u_int8_t itkix1_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
{
bus_space_tag_t t = sc->sc_maps[0].t;
bus_space_handle_t h = sc->sc_maps[0].h;
switch (what) {
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, offs);
return bus_space_read_1(t, h, ITK_ISAC_DATA);
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
return bus_space_read_1(t, h, ITK_HSCX_DATA);
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
return bus_space_read_1(t, h, ITK_HSCX_DATA);
}
return 0;
}
#endif
#endif /* ISICISA_ITKIX1 */