NetBSD/usr.sbin/pppd/doc/README.MSCHAP80

285 lines
11 KiB
Plaintext

PPP Client Support for Microsoft's CHAP-80
==========================================
Eric Rosenquist rosenqui@strataware.com
(updated by Paul Mackerras)
(updated by Al Longyear)
(updated by Farrell Woods)
INTRODUCTION
Microsoft has introduced an extension to the Challenge/Handshake
Authentication Protocol (CHAP) which avoids storing cleartext
passwords on a server. (Unfortunately, this is not as secure as it
sounds, because the encrypted password stored on a server can be used
by a bogus client to gain access to the server just as easily as if
the password were stored in cleartext.) The details of the Microsoft
extensions can be found in the document:
<ftp://ftp.microsoft.com/developr/rfc/chapexts.txt>
In short, MS-CHAP is identified as <auth chap 80> since the hex value
of 80 is used to designate Microsoft's scheme. Standard PPP CHAP uses
a value of 5. If you enable PPP debugging with the "debug" option and
see something like the following in your logs, the remote server is
requesting MS-CHAP:
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap 80> <magic 0x46a3>]
^^^^^^^^^^^^
The standard pppd implementation will indicate its lack of support for
MS-CHAP by NAKing it:
sent [LCP ConfNak id=0x2 <auth chap 05>]
Windows NT Server systems are often configured to "Accept only
Microsoft Authentication" (this is intended to enhance security). Up
until now, that meant that you couldn't use this version of PPPD to
connect to such a system. I've managed to get a client-only
implementation of MS-CHAP working; it will authenticate itself to
another system using MS-CHAP, but if you're using PPPD as a dial-in
server, you won't be able to use MS-CHAP to authenticate the clients.
This would not be a lot of extra work given that the framework is in
place, but I didn't need it myself so I didn't implement it.
BUILDING THE PPPD
MS-CHAP uses a combination of MD4 hashing and DES encryption for
authentication. You may need to get Eric Young's libdes library in
order to use my MS-CHAP extensions. A lot of UNIX systems already
have DES encryption available via the crypt(3), encrypt(3) and
setkey(3) interfaces. Some may (such as that on Digital UNIX)
provide only the encryption mechanism and will not perform
decryption. This is okay. We only need to encrypt to perform
MS-CHAP authentication.
If you have encrypt/setkey available, then hopefully you need only
define these two things in your Makefile: -DUSE_CRYPT and -DCHAPMS.
Skip the paragraphs below about obtaining and building libdes. Do
the "make clean" and "make" as described below. Linux users
should not need to modify their Makefiles. Instead,
just do "make CHAPMS=1 USE_CRYPT=1".
If you don't have encrypt and setkey, you will need Eric Young's
libdes library. You can find it in:
ftp://ftp.funet.fi/pub/crypt/mirrors/ftp.psy.uq.oz.au/DES/libdes-3.06.tar.gz
Australian residents can get libdes from Eric Young's site:
ftp://ftp.psy.uq.oz.au/pub/Crypto/DES/libdes-3.06.tar.gz
It is also available on many other sites (ask Archie).
I used libdes-3.06, but hopefully anything newer than that will work
also. Get the library, build and test it on your system, and install
it somewhere (typically /usr/local/lib and /usr/local/include).
You should now be ready to (re)compile the PPPD. Go to the pppd
subdirectory and make sure the Makefile contains "-DCHAPMS" in the
CFLAGS or COMPILE_FLAGS macro, and that the LIBS macro (or LDADD for
BSD systems) contains "-ldes". Depending on your system and where the
DES library was installed, you may also need to alter the include and
library paths used by your compiler.
Do a "make clean" and then a "make" to rebuild pppd. Assuming all
goes well, install the new pppd and move on to the CONFIGURATION
section.
CONFIGURATION
If you've never used PPPD with CHAP before, read the man page (type
"man pppd") and read the description in there. Basically, you need to
edit the "chap-secrets" file typically named /etc/ppp/chap-secrets.
This should contain the following two lines for each system with which
you use CHAP (with no leading blanks):
RemoteHost Account Secret
Account RemoteHost Secret
Note that you need both lines and that item 1 and 2 are swapped in the
second line. I'm not sure why you need it twice, but it works and I didn't
have time to look into it further. The "RemoteHost" is a somewhat
arbitrary name for the remote Windows NT system you're dialing. It doesn't
have to match the NT system's name, but it *does* have to match what you
use with the "remotename" parameter. The "Account" is the Windows NT
account name you have been told to use when dialing, and the "Secret" is
the password for that account. For example, if your service provider calls
their machine "DialupNT" and tells you your account and password are
"customer47" and "foobar", add the following to your chap-secrets file:
DialupNT customer47 foobar
customer47 DialupNT foobar
The only other thing you need to do for MS-CHAP (compared to normal CHAP)
is to always use the "remotename" option, either on the command line or in
your "options" file (see the pppd man page for details). In the case of
the above example, you would need to use the following command line:
pppd name customer47 remotename DialupNT <other options>
or add:
name customer47
remotename DialupNT
to your PPPD "options" file.
The "remotename" option is required for MS-CHAP since Microsoft PPP servers
don't send their system name in the CHAP challenge packet.
E=691 (AUTHENTICATION_FAILURE) ERRORS WHEN YOU HAVE THE VALID SECRET (PASSWORD)
If your RAS server is not the domain controller and is not a 'stand-alone'
server then it must make a query to the domain controller for your domain.
You need to specify the domain name with the user name when you attempt to
use this type of a configuration. The domain name is specified with the
local name in the chap-secrets file and with the option for the 'name'
parameter.
For example, the previous example would become:
DialupNT domain\\customer47 foobar
domain\\customer47 DialupNT foobar
and
pppd name 'domain\\customer47' remotename DialupNT <other options>
or add:
name domain\\customer47
remotename DialupNT
when the Windows NT domain name is simply called 'domain'.
TROUBLESHOOTING
Assuming that everything else has been configured correctly for PPP and
CHAP, the MS-CHAP-specific problems you're likely to encounter are mostly
related to your Windows NT account and its settings. A Microsoft server
returns error codes in its CHAP response. The following are extracted from
Microsoft's "chapexts.txt" file referenced above:
646 ERROR_RESTRICTED_LOGON_HOURS
647 ERROR_ACCT_DISABLED
648 ERROR_PASSWD_EXPIRED
649 ERROR_NO_DIALIN_PERMISSION
691 ERROR_AUTHENTICATION_FAILURE
709 ERROR_CHANGING_PASSWORD
You'll see these in your pppd log as a line similar to:
Remote message: E=649 R=0
The "E=" is the error number from the table above, and the "R=" flag
indicates whether the error is transient and the client should retry. If
you consistently get error 691, then either you're using the wrong account
name/password, or the DES library or MD4 hashing (in md4.c) aren't working
properly. Verify your account name and password (use a Windows NT or
Windows 95 system to dial-in if you have one available). If that checks
out, test the DES library with the "destest" program included with the DES
library. If DES checks out, the md4.c routines are probably failing
(system byte ordering may be a problem) or my code is screwing up. I've
only got access to a Linux system, so you're on your own for anything else.
Another thing that might cause problems is that some RAS servers won't
respond at all to LCP config requests without seeing the word "CLIENT"
from the other end. If you see pppd sending out LCP config requests
without getting any reply, try putting something in your chat script
to send the word CLIENT after the modem has connected.
If everything compiles cleanly, but fails at authentication time, then
it might be a case of the MD4 or DES code screwing up. The following
small program can be used to test the MS-CHAP code to see if it
produces a known response:
-----------------
#include <stdio.h>
#include "pppd.h"
#include "chap.h"
#include "chap_ms.h"
int main(argc, argv)
int argc;
char *argv[];
{
u_char challenge[8];
int challengeInt[sizeof(challenge)];
chap_state cstate;
int i;
if (argc != 3) {
fprintf(stderr, "Usage: %s <16-hexchar challenge> <password>\n",
argv[0]); exit(1);
}
sscanf(argv[1], "%2x%2x%2x%2x%2x%2x%2x%2x",
challengeInt + 0, challengeInt + 1, challengeInt + 2,
challengeInt + 3, challengeInt + 4, challengeInt + 5,
challengeInt + 6, challengeInt + 7);
for (i = 0; i < sizeof(challenge); i++)
challenge[i] = (u_char)challengeInt[i];
ChapMS(&cstate, challenge, sizeof(challenge), argv[2], strlen(argv[2]));
printf("Response length is %d, response is:", cstate.resp_length);
for (i = 0; i < cstate.resp_length; i++) {
if (i % 8 == 0)
putchar('\n');
printf("%02X ", (unsigned int)cstate.response[i]);
}
putchar('\n');
exit(0);
}
-------------
This needs to link against chap_ms.o, md4.o, and the DES library. When
you run it with the command line:
$ testchap 00000000000000000000000000000000 hello
it should output the following:
Response length is 49, response is:
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
F4 D9 9D AF 82 64 DC 3C
53 F9 BC 92 14 B5 5D 9E
78 C4 21 48 9D B7 A8 B4
01
if not, then either the DES library is not working, the MD4 code isn't
working, or there are some problems with the port of the code in
chap_ms.c.
STILL TO DO
A site using only MS-CHAP to authenticate has no need to store cleartext
passwords in the "chap-secrets" file. A utility that spits out the ASCII
hex MD4 hash of a given password would be nice, and would allow that hash
to be used in chap-secrets in place of the password. The code to do this
could quite easily be lifted from chap_ms.c (you have to convert the
password to Unicode before hashing it). The chap_ms.c file would also have
to be changed to recognize a password hash (16 binary bytes == 32 ASCII hex
characters) and skip the hashing stage.
A server implementation would allow MS-CHAP to be used with Windows NT and
Windows 95 clients for enhanced security. Some new command-line options
would be required, as would code to generate the Challenge packet and
verify the response. Most of the helper functions are in place, so this
shouldn't be too hard for someone to add.