428 lines
11 KiB
C
428 lines
11 KiB
C
/* $NetBSD: ncr.c,v 1.40 2003/07/15 02:15:07 lukem Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1996 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Adam Glass, David Jones, Gordon W. Ross, and Jens A. Nilsson.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the machine-dependent parts of the NCR-5380
|
|
* controller. The machine-independent parts are in ncr5380sbc.c.
|
|
*
|
|
* Jens A. Nilsson.
|
|
*
|
|
* Credits:
|
|
*
|
|
* This code is based on arch/sun3/dev/si*
|
|
* Written by David Jones, Gordon Ross, and Adam Glass.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: ncr.c,v 1.40 2003/07/15 02:15:07 lukem Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/user.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsipi_debug.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
|
|
#include <dev/ic/ncr5380reg.h>
|
|
#include <dev/ic/ncr5380var.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/vsbus.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/sid.h>
|
|
#include <machine/scb.h>
|
|
#include <machine/clock.h>
|
|
|
|
#include "ioconf.h"
|
|
|
|
#define MIN_DMA_LEN 128
|
|
|
|
struct si_dma_handle {
|
|
int dh_flags;
|
|
#define SIDH_BUSY 1
|
|
#define SIDH_OUT 2
|
|
caddr_t dh_addr;
|
|
int dh_len;
|
|
struct proc *dh_proc;
|
|
};
|
|
|
|
struct si_softc {
|
|
struct ncr5380_softc ncr_sc;
|
|
struct evcnt ncr_intrcnt;
|
|
caddr_t ncr_addr;
|
|
int ncr_off;
|
|
int ncr_dmaaddr;
|
|
int ncr_dmacount;
|
|
int ncr_dmadir;
|
|
struct si_dma_handle ncr_dma[SCI_OPENINGS];
|
|
struct vsbus_dma sc_vd;
|
|
int onlyscsi; /* This machine needs no queueing */
|
|
};
|
|
|
|
static int ncr_dmasize;
|
|
|
|
static int si_vsbus_match(struct device *, struct cfdata *, void *);
|
|
static void si_vsbus_attach(struct device *, struct device *, void *);
|
|
static void si_minphys(struct buf *);
|
|
|
|
static void si_dma_alloc(struct ncr5380_softc *);
|
|
static void si_dma_free(struct ncr5380_softc *);
|
|
static void si_dma_setup(struct ncr5380_softc *);
|
|
static void si_dma_start(struct ncr5380_softc *);
|
|
static void si_dma_poll(struct ncr5380_softc *);
|
|
static void si_dma_eop(struct ncr5380_softc *);
|
|
static void si_dma_stop(struct ncr5380_softc *);
|
|
static void si_dma_go(void *);
|
|
|
|
CFATTACH_DECL(si_vsbus, sizeof(struct si_softc),
|
|
si_vsbus_match, si_vsbus_attach, NULL, NULL);
|
|
|
|
static int
|
|
si_vsbus_match(struct device *parent, struct cfdata *cf, void *aux)
|
|
{
|
|
struct vsbus_attach_args *va = aux;
|
|
volatile char *si_csr = (char *) va->va_addr;
|
|
|
|
if (vax_boardtype == VAX_BTYP_49 || vax_boardtype == VAX_BTYP_46
|
|
|| vax_boardtype == VAX_BTYP_48 || vax_boardtype == VAX_BTYP_53)
|
|
return 0;
|
|
/* This is the way Linux autoprobes the interrupt MK-990321 */
|
|
si_csr[12] = 0;
|
|
si_csr[16] = 0x80;
|
|
si_csr[0] = 0x80;
|
|
si_csr[4] = 5; /* 0xcf */
|
|
DELAY(100000);
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
si_vsbus_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct vsbus_attach_args *va = aux;
|
|
struct si_softc *sc = (struct si_softc *) self;
|
|
struct ncr5380_softc *ncr_sc = &sc->ncr_sc;
|
|
int tweak, target;
|
|
|
|
scb_vecalloc(va->va_cvec, (void (*)(void *)) ncr5380_intr, sc,
|
|
SCB_ISTACK, &sc->ncr_intrcnt);
|
|
evcnt_attach_dynamic(&sc->ncr_intrcnt, EVCNT_TYPE_INTR, NULL,
|
|
self->dv_xname, "intr");
|
|
|
|
/*
|
|
* DMA area mapin.
|
|
* On VS3100, split the 128K block between the two devices.
|
|
* On VS2000, don't care for now.
|
|
*/
|
|
#define DMASIZE (64*1024)
|
|
if (va->va_paddr & 0x100) { /* Secondary SCSI controller */
|
|
sc->ncr_off = DMASIZE;
|
|
sc->onlyscsi = 1;
|
|
}
|
|
sc->ncr_addr = (caddr_t)va->va_dmaaddr;
|
|
ncr_dmasize = min(va->va_dmasize, MAXPHYS);
|
|
|
|
/*
|
|
* MD function pointers used by the MI code.
|
|
*/
|
|
ncr_sc->sc_dma_alloc = si_dma_alloc;
|
|
ncr_sc->sc_dma_free = si_dma_free;
|
|
ncr_sc->sc_dma_setup = si_dma_setup;
|
|
ncr_sc->sc_dma_start = si_dma_start;
|
|
ncr_sc->sc_dma_poll = si_dma_poll;
|
|
ncr_sc->sc_dma_eop = si_dma_eop;
|
|
ncr_sc->sc_dma_stop = si_dma_stop;
|
|
|
|
/* DMA control register offsets */
|
|
sc->ncr_dmaaddr = 32; /* DMA address in buffer, longword */
|
|
sc->ncr_dmacount = 64; /* DMA count register */
|
|
sc->ncr_dmadir = 68; /* Direction of DMA transfer */
|
|
|
|
ncr_sc->sc_pio_out = ncr5380_pio_out;
|
|
ncr_sc->sc_pio_in = ncr5380_pio_in;
|
|
|
|
ncr_sc->sc_min_dma_len = MIN_DMA_LEN;
|
|
|
|
/*
|
|
* Initialize fields used by the MI code.
|
|
*/
|
|
/* ncr_sc->sc_regt = Unused on VAX */
|
|
ncr_sc->sc_regh = vax_map_physmem(va->va_paddr, 1);
|
|
|
|
/* Register offsets */
|
|
ncr_sc->sci_r0 = 0;
|
|
ncr_sc->sci_r1 = 4;
|
|
ncr_sc->sci_r2 = 8;
|
|
ncr_sc->sci_r3 = 12;
|
|
ncr_sc->sci_r4 = 16;
|
|
ncr_sc->sci_r5 = 20;
|
|
ncr_sc->sci_r6 = 24;
|
|
ncr_sc->sci_r7 = 28;
|
|
|
|
ncr_sc->sc_rev = NCR_VARIANT_NCR5380;
|
|
|
|
ncr_sc->sc_no_disconnect = 0xff;
|
|
|
|
/*
|
|
* Get the SCSI chip target address out of NVRAM.
|
|
* This do not apply to the VS2000.
|
|
*/
|
|
tweak = clk_tweak + (va->va_paddr & 0x100 ? 3 : 0);
|
|
if (vax_boardtype == VAX_BTYP_410)
|
|
target = 7;
|
|
else
|
|
target = (clk_page[0xbc/2] >> tweak) & 7;
|
|
|
|
printf("\n%s: NCR5380, SCSI ID %d\n", ncr_sc->sc_dev.dv_xname, target);
|
|
|
|
ncr_sc->sc_adapter.adapt_minphys = si_minphys;
|
|
ncr_sc->sc_channel.chan_id = target;
|
|
|
|
/*
|
|
* Init the vsbus DMA resource queue struct */
|
|
sc->sc_vd.vd_go = si_dma_go;
|
|
sc->sc_vd.vd_arg = sc;
|
|
|
|
/*
|
|
* Initialize si board itself.
|
|
*/
|
|
ncr5380_attach(ncr_sc);
|
|
}
|
|
|
|
/*
|
|
* Adjust the max transfer size. The DMA buffer is only 16k on VS2000.
|
|
*/
|
|
static void
|
|
si_minphys(struct buf *bp)
|
|
{
|
|
if (bp->b_bcount > ncr_dmasize)
|
|
bp->b_bcount = ncr_dmasize;
|
|
}
|
|
|
|
void
|
|
si_dma_alloc(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
struct si_softc *sc = (struct si_softc *)ncr_sc;
|
|
struct sci_req *sr = ncr_sc->sc_current;
|
|
struct scsipi_xfer *xs = sr->sr_xs;
|
|
struct si_dma_handle *dh;
|
|
int xlen, i;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sr->sr_dma_hand != NULL)
|
|
panic("si_dma_alloc: already have DMA handle");
|
|
#endif
|
|
|
|
/* Polled transfers shouldn't allocate a DMA handle. */
|
|
if (sr->sr_flags & SR_IMMED)
|
|
return;
|
|
|
|
xlen = ncr_sc->sc_datalen;
|
|
|
|
/* Make sure our caller checked sc_min_dma_len. */
|
|
if (xlen < MIN_DMA_LEN)
|
|
panic("si_dma_alloc: len=0x%x", xlen);
|
|
|
|
/*
|
|
* Find free PDMA handle. Guaranteed to find one since we
|
|
* have as many PDMA handles as the driver has processes.
|
|
* (instances?)
|
|
*/
|
|
for (i = 0; i < SCI_OPENINGS; i++) {
|
|
if ((sc->ncr_dma[i].dh_flags & SIDH_BUSY) == 0)
|
|
goto found;
|
|
}
|
|
panic("sbc: no free PDMA handles");
|
|
found:
|
|
dh = &sc->ncr_dma[i];
|
|
dh->dh_flags = SIDH_BUSY;
|
|
dh->dh_addr = ncr_sc->sc_dataptr;
|
|
dh->dh_len = xlen;
|
|
dh->dh_proc = xs->bp->b_proc;
|
|
|
|
/* Remember dest buffer parameters */
|
|
if (xs->xs_control & XS_CTL_DATA_OUT)
|
|
dh->dh_flags |= SIDH_OUT;
|
|
|
|
sr->sr_dma_hand = dh;
|
|
}
|
|
|
|
void
|
|
si_dma_free(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
struct sci_req *sr = ncr_sc->sc_current;
|
|
struct si_dma_handle *dh = sr->sr_dma_hand;
|
|
|
|
if (dh->dh_flags & SIDH_BUSY)
|
|
dh->dh_flags = 0;
|
|
else
|
|
printf("si_dma_free: free'ing unused buffer\n");
|
|
|
|
sr->sr_dma_hand = NULL;
|
|
}
|
|
|
|
void
|
|
si_dma_setup(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
/* Do nothing here */
|
|
}
|
|
|
|
void
|
|
si_dma_start(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
struct si_softc *sc = (struct si_softc *)ncr_sc;
|
|
|
|
/* Just put on queue; will call go() from below */
|
|
if (sc->onlyscsi)
|
|
si_dma_go(ncr_sc);
|
|
else
|
|
vsbus_dma_start(&sc->sc_vd);
|
|
}
|
|
|
|
/*
|
|
* go() routine called when another transfer somewhere is finished.
|
|
*/
|
|
void
|
|
si_dma_go(void *arg)
|
|
{
|
|
struct ncr5380_softc *ncr_sc = arg;
|
|
struct si_softc *sc = (struct si_softc *)ncr_sc;
|
|
struct sci_req *sr = ncr_sc->sc_current;
|
|
struct si_dma_handle *dh = sr->sr_dma_hand;
|
|
|
|
/*
|
|
* Set the VAX-DMA-specific registers, and copy the data if
|
|
* it is directed "outbound".
|
|
*/
|
|
if (dh->dh_flags & SIDH_OUT) {
|
|
vsbus_copyfromproc(dh->dh_proc, dh->dh_addr,
|
|
sc->ncr_addr + sc->ncr_off, dh->dh_len);
|
|
bus_space_write_1(ncr_sc->sc_regt, ncr_sc->sc_regh,
|
|
sc->ncr_dmadir, 0);
|
|
} else {
|
|
bus_space_write_1(ncr_sc->sc_regt, ncr_sc->sc_regh,
|
|
sc->ncr_dmadir, 1);
|
|
}
|
|
bus_space_write_4(ncr_sc->sc_regt, ncr_sc->sc_regh,
|
|
sc->ncr_dmacount, -dh->dh_len);
|
|
bus_space_write_4(ncr_sc->sc_regt, ncr_sc->sc_regh,
|
|
sc->ncr_dmaaddr, sc->ncr_off);
|
|
/*
|
|
* Now from the 5380-internal DMA registers.
|
|
*/
|
|
if (dh->dh_flags & SIDH_OUT) {
|
|
NCR5380_WRITE(ncr_sc, sci_tcmd, PHASE_DATA_OUT);
|
|
NCR5380_WRITE(ncr_sc, sci_icmd, SCI_ICMD_DATA);
|
|
NCR5380_WRITE(ncr_sc, sci_mode, NCR5380_READ(ncr_sc, sci_mode)
|
|
| SCI_MODE_DMA | SCI_MODE_DMA_IE);
|
|
NCR5380_WRITE(ncr_sc, sci_dma_send, 0);
|
|
} else {
|
|
NCR5380_WRITE(ncr_sc, sci_tcmd, PHASE_DATA_IN);
|
|
NCR5380_WRITE(ncr_sc, sci_icmd, 0);
|
|
NCR5380_WRITE(ncr_sc, sci_mode, NCR5380_READ(ncr_sc, sci_mode)
|
|
| SCI_MODE_DMA | SCI_MODE_DMA_IE);
|
|
NCR5380_WRITE(ncr_sc, sci_irecv, 0);
|
|
}
|
|
ncr_sc->sc_state |= NCR_DOINGDMA;
|
|
}
|
|
|
|
/*
|
|
* When?
|
|
*/
|
|
void
|
|
si_dma_poll(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
printf("si_dma_poll\n");
|
|
}
|
|
|
|
/*
|
|
* When?
|
|
*/
|
|
void
|
|
si_dma_eop(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
printf("si_dma_eop\n");
|
|
}
|
|
|
|
void
|
|
si_dma_stop(struct ncr5380_softc *ncr_sc)
|
|
{
|
|
struct si_softc *sc = (struct si_softc *)ncr_sc;
|
|
struct sci_req *sr = ncr_sc->sc_current;
|
|
struct si_dma_handle *dh = sr->sr_dma_hand;
|
|
int count, i;
|
|
|
|
if (ncr_sc->sc_state & NCR_DOINGDMA)
|
|
ncr_sc->sc_state &= ~NCR_DOINGDMA;
|
|
|
|
/*
|
|
* Sometimes the FIFO buffer isn't drained when the
|
|
* interrupt is posted. Just loop here and hope that
|
|
* it will drain soon.
|
|
*/
|
|
for (i = 0; i < 20000; i++) {
|
|
count = bus_space_read_4(ncr_sc->sc_regt,
|
|
ncr_sc->sc_regh, sc->ncr_dmacount);
|
|
if (count == 0)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (count == 0) {
|
|
if (((dh->dh_flags & SIDH_OUT) == 0)) {
|
|
vsbus_copytoproc(dh->dh_proc,
|
|
sc->ncr_addr + sc->ncr_off,
|
|
dh->dh_addr, dh->dh_len);
|
|
}
|
|
ncr_sc->sc_dataptr += dh->dh_len;
|
|
ncr_sc->sc_datalen -= dh->dh_len;
|
|
}
|
|
|
|
NCR5380_WRITE(ncr_sc, sci_mode, NCR5380_READ(ncr_sc, sci_mode) &
|
|
~(SCI_MODE_DMA | SCI_MODE_DMA_IE));
|
|
NCR5380_WRITE(ncr_sc, sci_icmd, 0);
|
|
if (sc->onlyscsi == 0)
|
|
vsbus_dma_intr(); /* Try to start more transfers */
|
|
}
|