7c840df334
esiop has been tested enouth now. esiop not added to INSTALL kernels because of possible space constraint. siop should be able to drive all adapters supported by esiop.
420 lines
14 KiB
Plaintext
420 lines
14 KiB
Plaintext
# $NetBSD: GENERIC,v 1.91 2003/08/06 12:32:05 bouyer Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/arc/conf/std.arc"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.91 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# Platform support
|
|
options PLATFORM_ACER_PICA_61 # PICA, NEC ImageRISCstation
|
|
options PLATFORM_DESKTECH_ARCSTATION_I # DeskStation rPC44
|
|
options PLATFORM_DESKTECH_TYNE # DeskStation Tyne
|
|
options PLATFORM_MICROSOFT_JAZZ # MIPS Magnum
|
|
options PLATFORM_NEC_J96A # NEC Express 5800/240 EISA R4K
|
|
options PLATFORM_NEC_JC94 # NEC Express 5800/230 PCI R4K
|
|
options PLATFORM_NEC_R94 # NEC RISCstation 2200 EISA
|
|
options PLATFORM_NEC_R96 # NEC Express RISCserver, RISCserver 2200
|
|
options PLATFORM_NEC_RAX94 # NEC RISCstation 2200 PCI
|
|
options PLATFORM_NEC_RD94 # NEC RISCstation 2250
|
|
options PLATFORM_SNI_RM200PCI
|
|
|
|
# Standard system options
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
|
|
options LKM # loadable kernel modules
|
|
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options NEW_BUFQ_STRATEGY
|
|
|
|
# Diagnostic/debugging support options
|
|
options DIAGNOSTIC # cheap kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options KGDB # remote gdb
|
|
#options KGDB_DEVRATE=19200 # kernel gdb port rate (default 9600)
|
|
#options KGDB_DEV="17*256+0" # device for kernel gdb
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
options SYMTAB_SPACE=262144
|
|
|
|
# Compatibility options
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2,
|
|
options COMPAT_13 # NetBSD 1.3,
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_43 # and 4.3BSD
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
|
|
# mipsel specific
|
|
options COMPAT_ULTRIX # Ultrix binary compatibility
|
|
options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
|
|
|
|
# File systems
|
|
file-system FFS # fast filesystem
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system NFS # Network File System client
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # IP packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
options CCITT,LLC,HDLC # X.25
|
|
options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
#options EISAVERBOSE # verbose EISA device autoconfig messages
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
|
|
# wscons terminal emulation
|
|
options WSEMUL_VT100 # VT100 emulation
|
|
|
|
# Kernel root file system and dump configuration.
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on sd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
cpu* at mainbus0
|
|
|
|
#### Jazz-Internal bus devices
|
|
|
|
# PLATFORM_ACER_PICA_61
|
|
# PLATFORM_MICROSOFT_JAZZ
|
|
# PLATFORM_NEC_J96A
|
|
# PLATFORM_NEC_JC94
|
|
# PLATFORM_NEC_R94
|
|
# PLATFORM_NEC_R96
|
|
# PLATFORM_NEC_RAX94
|
|
# PLATFORM_NEC_RD94
|
|
jazzio* at mainbus0 # Jazz-Internal bus host bridge.
|
|
|
|
timer0 at jazzio?
|
|
mcclock0 at jazzio?
|
|
#pc0 at jazzio?
|
|
#opms0 at jazzio?
|
|
vga0 at jazzio? # Jazz localbus VGA
|
|
pckbc0 at jazzio? # PC keyboard controller
|
|
com0 at jazzio?
|
|
com1 at jazzio?
|
|
lpt0 at jazzio?
|
|
sn0 at jazzio?
|
|
|
|
fdc0 at jazzio?
|
|
fd* at fdc? drive ?
|
|
|
|
asc0 at jazzio? flags 0x000000 # NCR53C9x SCSI
|
|
scsibus* at asc?
|
|
|
|
osiop* at jazzio? flags 0x00000 # NCR53C710 SCSI
|
|
scsibus* at osiop?
|
|
|
|
oosiop* at jazzio? # NCR53C700 SCSI
|
|
scsibus* at oosiop?
|
|
|
|
#### ISA bus devices
|
|
|
|
# PLATFORM_ACER_PICA_61
|
|
# PLATFORM_MICROSOFT_JAZZ
|
|
# PLATFORM_NEC_J96A
|
|
# PLATFORM_NEC_R94
|
|
# PLATFORM_NEC_R96
|
|
jazzisabr* at mainbus0 # Jazz-(E)ISA bus bridge.
|
|
isa* at jazzisabr?
|
|
|
|
# PLATFORM_DESKTECH_ARCSTATION_I
|
|
arcsisabr* at mainbus0 # DeskStation rPC44 ISA host bridge.
|
|
isa* at arcsisabr?
|
|
|
|
# PLATFORM_DESKTECH_TYNE
|
|
tyneisabr* at mainbus0 # DeskStation Tyne ISA host bridge.
|
|
isa* at tyneisabr?
|
|
|
|
#isadma0 at isa?
|
|
|
|
isapnp0 at isa?
|
|
|
|
timer0 at isa? port 0x40 irq 0
|
|
mcclock0 at isa? port 0x70
|
|
|
|
#pc0 at isa? irq 1 # generic PC console device
|
|
#opms0 at isa? irq 12 # PS/2 auxiliary port mouse
|
|
vga0 at isa?
|
|
#options VGA_RASTERCONSOLE
|
|
options VGA_RESET
|
|
pckbc0 at isa? # PC keyboard controller
|
|
com0 at isa? port 0x3f8 irq 4
|
|
com1 at isa? port 0x2f8 irq 3
|
|
com2 at isa? port 0x3e8 irq 4
|
|
com3 at isa? port 0x2e8 irq 3
|
|
ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards
|
|
com* at ast? slave ?
|
|
|
|
# Joystick driver. Probe is a little strange; add only if you have one.
|
|
#joy0 at isa? port 0x201
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
#wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
wdc* at isapnp?
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at wdc? channel ?
|
|
|
|
# ISA parallel printer interfaces
|
|
lpt0 at isa? port 0x378 irq 7
|
|
|
|
# ISA network interfaces
|
|
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
|
|
ep* at isa? port ? irq ? # 3C509 ethernet cards
|
|
ep* at isapnp? # 3C509B ethernet card
|
|
ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
|
|
ne1 at isa? port 0x300 irq 10
|
|
ne* at isapnp? # NE[12]000 PnP ethernet
|
|
we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
|
|
we1 at isa? port 0x300 iomem 0xcc000 irq 10
|
|
|
|
# XXX - should be configured
|
|
#btl0 at isa? port 0x330 irq ? drq ?
|
|
#scsibus* at btl?
|
|
|
|
#### PCI bus devices
|
|
|
|
# PLATFORM_NEC_JC94
|
|
# PLATFORM_NEC_RAX94
|
|
# PLATFORM_NEC_RD94
|
|
necpb* at mainbus0 # NEC RISCstation PCI host bridge.
|
|
pci* at necpb?
|
|
|
|
#vga* at pci? dev ? function ?
|
|
tga* at pci? dev ? function ? # DEC ZLXp-E[123] Graphics
|
|
|
|
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
|
|
scsibus* at ahc?
|
|
|
|
iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
|
|
scsibus* at iha?
|
|
|
|
pcscp* at pci? dev ? function ? # AMD Am53c974 PCscsi-PCI SCSI
|
|
scsibus* at pcscp?
|
|
|
|
siop* at pci? dev ? function ? # NCR/Symbios 53c8xx SCSI
|
|
scsibus* at siop?
|
|
|
|
esiop* at pci? dev ? function ? # NCR/Symbios 53c875/95/1010
|
|
scsibus* at esiop?
|
|
|
|
trm* at pci? dev ? function ? # Tekram DC-395/315 SCSI
|
|
scsibus* at trm?
|
|
|
|
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
|
ex* at pci? dev ? function ? # 3Com 90x[BC]
|
|
fxp* at pci? dev ? function ? # Intel EtherExpress PRO
|
|
ne* at pci? dev ? function ? # NE2000-compatible
|
|
pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
|
|
rtk* at pci? dev ? function ? # Realtek 8129/8139
|
|
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
|
|
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
|
|
# IDE and related devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
pciide* at pci ? dev ? function ? flags 0x0000
|
|
wd* at pciide? channel ? drive ? flags 0x0000
|
|
atapibus* at pciide? channel ?
|
|
|
|
#### MII/PHY support
|
|
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
iophy* at mii? phy ? # Intel 82553 PHYs
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
#### SCSI bus devices
|
|
|
|
sd* at scsibus? target ? lun ?
|
|
st* at scsibus? target ? lun ?
|
|
cd* at scsibus? target ? lun ?
|
|
ch* at scsibus? target ? lun ?
|
|
ss* at scsibus? target ? lun ?
|
|
uk* at scsibus? target ? lun ?
|
|
|
|
#### ATAPI bus devices
|
|
|
|
# flags have the same meaning as for IDE drives.
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
#### Workstation Console attachments
|
|
|
|
wsdisplay* at vga?
|
|
wsdisplay* at tga?
|
|
pckbd* at pckbc? # PC keyboard (kbd port)
|
|
wskbd* at pckbd?
|
|
pms* at pckbc? # PS/2-style mouse (aux port)
|
|
wsmouse* at pms?
|
|
|
|
#### Pseudo devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
#pseudo-device cgd 4 # cryptographic disk devices
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device sl 2 # Serial Line IP
|
|
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device tb 1 # tablet line discipline
|
|
#pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port arc yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# mouse & keyboard multiplexor pseudo-devices
|
|
#pseudo-device wsmux
|
|
pseudo-device ksyms # /dev/ksyms
|