97de30ff26
* Rearrange the speed mapping table and adjust the code so that the highest rate can actually be used. Previously we ended up rounding up slightly lower speeds and then losing because set_params couldn't set the mode back to the current one. * Allow 260 as a valid I/O address, since the SB1 can be jumpered to this. * Change the MPU-401 code so it can be attached as a separate device. (XXX Really, the SB code ought to just attach a subdevice itself.) * Do not attach an OPL on the SB1. Writing to the OPL registers at SB_base+0 on this card wedges my machine. (XXX Should we access it at 388 instead? The Creative web site claims that this board *does* have an OPL2, but I haven't played with this extensively.) * Allocate the SB DMA channels at open time, rather than attach time, so that a single DRQ can be used for multiple cards (if only one is in use at a given time). (XXX Let me tell you why this is a horrible hack. If the ISA DMA code tries to allocate a bounce buffer after boot time, it will generally fail, because there is no contiguous memory below 16MB and the code to allocate contiguous pages doesn't know how to move things around. Now, we shouldn't ever be using bounce buffers here, because we use isa_dmamem_alloc(). So we just turn off BUS_DMA_ALLOCNOW and we don't actually try to. That's cool, and it even works, but isa_dmamem_alloc() has the same problem. It just happens that we allocate the ring buffers at boot time, and whenever we reallocate them (due to the buffer size changing), we just deallocated the previous (contiguous) buffer, so we get lucky. This is absolutely disgusting and needs to be fixed.)
166 lines
4.5 KiB
C
166 lines
4.5 KiB
C
/* $NetBSD: sb_isa.c,v 1.21 1999/03/22 07:37:35 mycroft Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1991-1993 Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the Computer Systems
|
|
* Engineering Group at Lawrence Berkeley Laboratory.
|
|
* 4. Neither the name of the University nor of the Laboratory may be used
|
|
* to endorse or promote products derived from this software without
|
|
* specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#include <sys/proc.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <sys/audioio.h>
|
|
#include <dev/audio_if.h>
|
|
#include <dev/midi_if.h>
|
|
#include <dev/mulaw.h>
|
|
|
|
#include <dev/isa/isavar.h>
|
|
#include <dev/isa/isadmavar.h>
|
|
|
|
#include <dev/isa/sbreg.h>
|
|
#include <dev/isa/sbvar.h>
|
|
|
|
#include <dev/isa/sbdspvar.h>
|
|
|
|
static int sbfind __P((struct device *, struct sbdsp_softc *, struct isa_attach_args *));
|
|
|
|
int sb_isa_match __P((struct device *, struct cfdata *, void *));
|
|
void sb_isa_attach __P((struct device *, struct device *, void *));
|
|
|
|
struct cfattach sb_isa_ca = {
|
|
sizeof(struct sbdsp_softc), sb_isa_match, sb_isa_attach
|
|
};
|
|
|
|
/*
|
|
* Probe / attach routines.
|
|
*/
|
|
|
|
/*
|
|
* Probe for the soundblaster hardware.
|
|
*/
|
|
int
|
|
sb_isa_match(parent, match, aux)
|
|
struct device *parent;
|
|
struct cfdata *match;
|
|
void *aux;
|
|
{
|
|
struct sbdsp_softc probesc, *sc = &probesc;
|
|
|
|
bzero(sc, sizeof *sc);
|
|
sc->sc_dev.dv_cfdata = match;
|
|
strcpy(sc->sc_dev.dv_xname, "sb");
|
|
return sbfind(parent, sc, aux);
|
|
}
|
|
|
|
static int
|
|
sbfind(parent, sc, ia)
|
|
struct device *parent;
|
|
struct sbdsp_softc *sc;
|
|
struct isa_attach_args *ia;
|
|
{
|
|
int rc = 0;
|
|
|
|
if (!SB_BASE_VALID(ia->ia_iobase)) {
|
|
printf("sb: configured iobase 0x%x invalid\n", ia->ia_iobase);
|
|
return 0;
|
|
}
|
|
|
|
sc->sc_ic = ia->ia_ic;
|
|
|
|
sc->sc_iot = ia->ia_iot;
|
|
/* Map i/o space [we map 24 ports which is the max of the sb and pro */
|
|
if (bus_space_map(sc->sc_iot, ia->ia_iobase, SBP_NPORT, 0,
|
|
&sc->sc_ioh)) {
|
|
printf("sb: can't map i/o space 0x%x/%d in probe\n",
|
|
ia->ia_iobase, SBP_NPORT);
|
|
return 0;
|
|
}
|
|
|
|
/* XXX These are only for setting chip configuration registers. */
|
|
sc->sc_iobase = ia->ia_iobase;
|
|
sc->sc_irq = ia->ia_irq;
|
|
|
|
sc->sc_drq8 = ia->ia_drq;
|
|
sc->sc_drq16 = ia->ia_drq2;
|
|
|
|
if (!sbmatch(sc))
|
|
goto bad;
|
|
|
|
if (ISSBPROCLASS(sc))
|
|
ia->ia_iosize = SBP_NPORT;
|
|
else
|
|
ia->ia_iosize = SB_NPORT;
|
|
|
|
if (!ISSB16CLASS(sc) && sc->sc_model != SB_JAZZ)
|
|
ia->ia_drq2 = -1;
|
|
|
|
ia->ia_irq = sc->sc_irq;
|
|
|
|
rc = 1;
|
|
|
|
bad:
|
|
bus_space_unmap(sc->sc_iot, sc->sc_ioh, SBP_NPORT);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*
|
|
* Attach hardware to driver, attach hardware driver to audio
|
|
* pseudo-device driver .
|
|
*/
|
|
void
|
|
sb_isa_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct sbdsp_softc *sc = (struct sbdsp_softc *)self;
|
|
struct isa_attach_args *ia = aux;
|
|
|
|
if (!sbfind(parent, sc, ia) ||
|
|
bus_space_map(sc->sc_iot, ia->ia_iobase, ia->ia_iosize,
|
|
0, &sc->sc_ioh)) {
|
|
printf("%s: sbfind failed\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
sc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
|
|
IPL_AUDIO, sbdsp_intr, sc);
|
|
|
|
sbattach(sc);
|
|
}
|