NetBSD/sys/arch/arm32/dev/com.c

1425 lines
33 KiB
C

/* $NetBSD: com.c,v 1.16 1997/01/26 02:16:44 mark Exp $ */
/*-
* Copyright (c) 1993, 1994, 1995, 1996
* Charles M. Hannum. All rights reserved.
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)com.c 7.5 (Berkeley) 5/16/91
*/
/*
* COM driver, based on HP dca driver
* uses National Semiconductor NS16450/NS16550AF UART
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/select.h>
#include <sys/tty.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/types.h>
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/irqhandler.h>
#include <machine/io.h>
#include <arm32/mainbus/mainbus.h>
#include <arm32/mainbus/comreg.h>
#include <arm32/mainbus/comvar.h>
#include <dev/ic/ns16550reg.h>
#ifdef COM_HAYESP
#include <dev/ic/hayespreg.h>
#endif
#define com_lcr com_cfcr
#include "com.h"
#define COM_IBUFSIZE (2 * 512)
#define COM_IHIGHWATER ((3 * COM_IBUFSIZE) / 4)
struct com_softc {
struct device sc_dev;
void *sc_ih;
struct tty *sc_tty;
int sc_overflows;
int sc_floods;
int sc_failures;
int sc_errors;
int sc_halt;
int sc_iobase;
#ifdef COM_HAYESP
int sc_hayespbase;
#endif
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_space_handle_t sc_hayespioh;
u_char sc_hwflags;
#define COM_HW_NOIEN 0x01
#define COM_HW_FIFO 0x02
#define COM_HW_HAYESP 0x04
#define COM_HW_CONSOLE 0x40
u_char sc_swflags;
#define COM_SW_SOFTCAR 0x01
#define COM_SW_CLOCAL 0x02
#define COM_SW_CRTSCTS 0x04
#define COM_SW_MDMBUF 0x08
u_char sc_msr, sc_mcr, sc_lcr, sc_ier;
u_char sc_dtr;
u_char *sc_ibuf, *sc_ibufp, *sc_ibufhigh, *sc_ibufend;
u_char sc_ibufs[2][COM_IBUFSIZE];
};
#ifdef COM_HAYESP
int comprobeHAYESP __P((bus_space_handle_t hayespioh, struct com_softc *sc));
#endif
void comdiag __P((void *));
int comspeed __P((long));
int comparam __P((struct tty *, struct termios *));
void comstart __P((struct tty *));
void comsoft __P((void *));
/* XXX: These belong elsewhere */
cdev_decl(com);
bdev_decl(com);
struct consdev;
void comcnprobe __P((struct consdev *));
void comcninit __P((struct consdev *));
int comcngetc __P((dev_t));
void comcnputc __P((dev_t, int));
void comcnpollc __P((dev_t, int));
static u_char tiocm_xxx2mcr __P((int));
/*
* XXX the following two cfattach structs should be different, and possibly
* XXX elsewhere.
*/
#ifdef __BROKEN_INDIRECT_CONFIG
int comprobe __P((struct device *, void *, void *));
#else
int comprobe __P((struct device *, struct cfdata *, void *));
#endif
void comattach __P((struct device *, struct device *, void *));
struct cfattach com_ca = {
sizeof(struct com_softc), comprobe, comattach
};
struct cfdriver com_cd = {
NULL, "com", DV_TTY
};
#ifdef COMCONSOLE
int comdefaultrate = CONSPEED; /* XXX why set default? */
#else
int comdefaultrate = TTYDEF_SPEED;
#endif
int comconsaddr;
int comconsattached;
bus_space_tag_t comconstag;
bus_space_handle_t comconsbah;
tcflag_t comconscflag = TTYDEF_CFLAG;
int commajor;
int comsopen = 0;
int comevents = 0;
#ifdef KGDB
#include <machine/remote-sl.h>
extern int kgdb_dev;
extern int kgdb_rate;
extern int kgdb_debug_init;
#endif
#define COMUNIT(x) (minor(x))
/* Macros to clear/set/test flags. */
#define SET(t, f) (t) |= (f)
#define CLR(t, f) (t) &= ~(f)
#define ISSET(t, f) ((t) & (f))
int
comspeed(speed)
long speed;
{
#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */
int x, err;
if (speed == 0)
return 0;
if (speed < 0)
return -1;
x = divrnd((COM_FREQ / 16), speed);
if (x <= 0)
return -1;
err = divrnd((COM_FREQ / 16) * 1000, speed * x) - 1000;
if (err < 0)
err = -err;
if (err > COM_TOLERANCE)
return -1;
return x;
#undef divrnd(n, q)
}
int
comprobe1(iot, ioh, iobase)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int iobase;
{
/* force access to id reg */
bus_space_write_1(iot, ioh, com_lcr, 0);
bus_space_write_1(iot, ioh, com_iir, 0);
if (bus_space_read_1(iot, ioh, com_iir) & 0x38)
return 0;
return 1;
}
#ifdef COM_HAYESP
int
comprobeHAYESP(hayespioh, sc)
bus_space_handle_t hayespioh;
struct com_softc *sc;
{
char val, dips;
int combaselist[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
bus_space_tag_t iot = sc->sc_iot;
/*
* Hayes ESP cards have two iobases. One is for compatibility with
* 16550 serial chips, and at the same ISA PC base addresses. The
* other is for ESP-specific enhanced features, and lies at a
* different addressing range entirely (0x140, 0x180, 0x280, or 0x300).
*/
/* Test for ESP signature */
if ((bus_space_read_1(iot, hayespioh, 0) & 0xf3) == 0)
return 0;
/*
* ESP is present at ESP enhanced base address; unknown com port
*/
/* Get the dip-switch configurations */
bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_GETDIPS);
dips = bus_space_read_1(iot, hayespioh, HAYESP_STATUS1);
/* Determine which com port this ESP card services: bits 0,1 of */
/* dips is the port # (0-3); combaselist[val] is the com_iobase */
if (sc->sc_iobase != combaselist[dips & 0x03])
return 0;
printf(": ESP");
/* Check ESP Self Test bits. */
/* Check for ESP version 2.0: bits 4,5,6 == 010 */
bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_GETTEST);
val = bus_space_read_1(iot, hayespioh, HAYESP_STATUS1); /* Clear reg 1 */
val = bus_space_read_1(iot, hayespioh, HAYESP_STATUS2);
if ((val & 0x70) < 0x20) {
printf("-old (%o)", val & 0x70);
/* we do not support the necessary features */
return 0;
}
/* Check for ability to emulate 16550: bit 8 == 1 */
if ((dips & 0x80) == 0) {
printf(" slave");
/* XXX Does slave really mean no 16550 support?? */
return 0;
}
/*
* If we made it this far, we are a full-featured ESP v2.0 (or
* better), at the correct com port address.
*/
SET(sc->sc_hwflags, COM_HW_HAYESP);
printf(", 1024 byte fifo\n");
return 1;
}
#endif
int
comprobe(parent, match, aux)
struct device *parent;
#ifdef __BROKEN_INDIRECT_CONFIG
void *match;
#else
struct cfdata *match;
#endif
void *aux;
{
bus_space_tag_t iot;
bus_space_handle_t ioh;
int iobase;
int rv = 1;
struct mainbus_attach_args *mb = aux;
iot = mb->mb_iot;
iobase = mb->mb_iobase;
/* if it's in use as console, it's there. */
if (iobase == comconsaddr && !comconsattached)
goto out;
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh)) {
rv = 0;
goto out;
}
rv = comprobe1(iot, ioh, iobase);
bus_space_unmap(iot, ioh, COM_NPORTS);
out:
mb->mb_iosize = COM_NPORTS;
return (rv);
}
void
comattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct com_softc *sc = (void *)self;
int iobase, irq;
bus_space_tag_t iot;
bus_space_handle_t ioh;
#ifdef COM_HAYESP
int hayesp_ports[] = { 0x140, 0x180, 0x280, 0x300, 0 };
int *hayespp;
#endif
struct mainbus_attach_args *mb = aux;
sc->sc_hwflags = 0;
sc->sc_swflags = 0;
/*
* We're living on an isa.
*/
iobase = mb->mb_iobase;
iot = mb->mb_iot;
if (iobase != comconsaddr) {
if (bus_space_map(iot, iobase, COM_NPORTS, 0, &ioh))
panic("comattach: io mapping failed");
} else
ioh = comconsbah;
irq = mb->mb_irq;
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_iobase = iobase;
if (iobase == comconsaddr) {
comconsattached = 1;
/* Make sure the console is always "hardwired". */
delay(1000); /* wait for output to finish */
SET(sc->sc_hwflags, COM_HW_CONSOLE);
SET(sc->sc_swflags, COM_SW_SOFTCAR);
}
#ifdef COM_HAYESP
/* Look for a Hayes ESP board. */
for (hayespp = hayesp_ports; *hayespp != 0; hayespp++) {
bus_space_handle_t hayespioh;
#define HAYESP_NPORTS 8 /* XXX XXX XXX ??? ??? ??? */
if (bus_space_map(iot, *hayespp, HAYESP_NPORTS, 0, &hayespioh))
continue;
if (comprobeHAYESP(hayespioh, sc)) {
sc->sc_hayespbase = *hayespp;
sc->sc_hayespioh = hayespioh;
break;
}
bus_space_unmap(iot, hayespioh, HAYESP_NPORTS);
}
/* No ESP; look for other things. */
if (*hayespp == 0) {
#endif
/* look for a NS 16550AF UART with FIFOs */
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14);
delay(100);
if (ISSET(bus_space_read_1(iot, ioh, com_iir), IIR_FIFO_MASK) == IIR_FIFO_MASK)
if (ISSET(bus_space_read_1(iot, ioh, com_fifo), FIFO_TRIGGER_14) == FIFO_TRIGGER_14) {
SET(sc->sc_hwflags, COM_HW_FIFO);
printf(": ns16550a, working fifo\n");
} else
printf(": ns16550, broken fifo\n");
else
printf(": ns8250 or ns16450, no fifo\n");
bus_space_write_1(iot, ioh, com_fifo, 0);
#ifdef COM_HAYESP
}
#endif
/* disable interrupts */
bus_space_write_1(iot, ioh, com_ier, 0);
bus_space_write_1(iot, ioh, com_mcr, 0);
if (irq != IRQUNK) {
sc->sc_ih = intr_claim(irq, IPL_TTY, "com",
comintr, sc);
}
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
cominit(iot, ioh, comdefaultrate);
printf("%s: console\n", sc->sc_dev.dv_xname);
}
#ifdef KGDB
if (kgdb_dev == makedev(commajor, unit)) {
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
kgdb_dev = -1; /* can't debug over console port */
else {
cominit(iot, ioh, kgdb_rate);
if (kgdb_debug_init) {
/*
* Print prefix of device name,
* let kgdb_connect print the rest.
*/
printf("%s: ", sc->sc_dev.dv_xname);
kgdb_connect(1);
} else
printf("%s: kgdb enabled\n",
sc->sc_dev.dv_xname);
}
}
#endif
}
int
comopen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
int unit = COMUNIT(dev);
struct com_softc *sc;
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct tty *tp;
int s;
int error = 0;
int count;
if (unit >= com_cd.cd_ndevs)
return ENXIO;
sc = com_cd.cd_devs[unit];
if (!sc)
return ENXIO;
if (!sc->sc_tty) {
tp = sc->sc_tty = ttymalloc();
tty_attach(tp);
} else
tp = sc->sc_tty;
tp->t_oproc = comstart;
tp->t_param = comparam;
tp->t_dev = dev;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
SET(tp->t_state, TS_WOPEN);
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
tp->t_cflag = comconscflag;
else
tp->t_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, COM_SW_CLOCAL))
SET(tp->t_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS))
SET(tp->t_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, COM_SW_MDMBUF))
SET(tp->t_cflag, MDMBUF);
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = comdefaultrate;
s = spltty();
comparam(tp, &tp->t_termios);
ttsetwater(tp);
if (comsopen++ == 0)
timeout(comsoft, NULL, 1);
sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0];
sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
iot = sc->sc_iot;
ioh = sc->sc_ioh;
#ifdef COM_HAYESP
/* Setup the ESP board */
if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) {
bus_space_handle_t hayespioh = sc->sc_hayespioh;
bus_space_write_1(iot, ioh, com_fifo,
FIFO_DMA_MODE|FIFO_ENABLE|
FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER_8);
/* Set 16550 compatibility mode */
bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_SETMODE);
bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
HAYESP_MODE_FIFO|HAYESP_MODE_RTS|
HAYESP_MODE_SCALE);
/* Set RTS/CTS flow control */
bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_SETFLOWTYPE);
bus_space_write_1(iot, hayespioh, HAYESP_CMD2, HAYESP_FLOW_RTS);
bus_space_write_1(iot, hayespioh, HAYESP_CMD2, HAYESP_FLOW_CTS);
/* Set flow control levels */
bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_SETRXFLOW);
bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
HAYESP_HIBYTE(HAYESP_RXHIWMARK));
bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
HAYESP_LOBYTE(HAYESP_RXHIWMARK));
bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
HAYESP_HIBYTE(HAYESP_RXLOWMARK));
bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
HAYESP_LOBYTE(HAYESP_RXLOWMARK));
} else
#endif
/*
* This is a patch for bugged revision 1-4 SMC FDC37C665
* I/O controllers.
* If there is RX data pending when the FIFO in turned on
* the RX register cannot be emptied.
*
* Solution:
* Make sure FIFO is off.
* Read pending data / int status etc.
* Enable FIFO.
*/
bus_space_write_1(iot, ioh, com_fifo, 0);
for (count = 0; count < 8; ++count)
(void)bus_space_read_1(iot, ioh, count);
if (ISSET(sc->sc_hwflags, COM_HW_FIFO))
/* Set the FIFO threshold based on the receive speed. */
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST |
(tp->t_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
/* flush any pending I/O */
count = 1024;
while (ISSET(bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY) && count > 0) {
(void) bus_space_read_1(iot, ioh, com_data);
--count;
}
if (count == 0) {
/*
* Read 1024 bytes from the serial chip and still data !
* This means something is broken ...
*/
printf("com init error: lsr=%02x data=%02x\n",
bus_space_read_1(iot, ioh, com_lsr),
bus_space_read_1(iot, ioh, com_data));
printf("Cannot clear serial input register\n");
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
CLR(tp->t_state, TS_WOPEN);
if (--comsopen == 0)
untimeout(comsoft, NULL);
splx(s);
return(ENXIO);
}
/* you turn me on, baby */
sc->sc_mcr = MCR_DTR | MCR_RTS;
if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN))
SET(sc->sc_mcr, MCR_IENABLE);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC;
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
sc->sc_msr = bus_space_read_1(iot, ioh, com_msr);
if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) ||
ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF))
SET(tp->t_state, TS_CARR_ON);
else
CLR(tp->t_state, TS_CARR_ON);
} else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0)
return EBUSY;
else
s = spltty();
/* wait for carrier if necessary */
if (!ISSET(flag, O_NONBLOCK))
while (!ISSET(tp->t_cflag, CLOCAL) &&
!ISSET(tp->t_state, TS_CARR_ON)) {
SET(tp->t_state, TS_WOPEN);
error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH,
ttopen, 0);
if (error) {
/* XXX should turn off chip if we're the
only waiter */
splx(s);
return error;
}
}
splx(s);
return (*linesw[tp->t_line].l_open)(dev, tp);
}
int
comclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
int unit = COMUNIT(dev);
struct com_softc *sc = com_cd.cd_devs[unit];
struct tty *tp = sc->sc_tty;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s;
/* XXX This is for cons.c. */
if (!ISSET(tp->t_state, TS_ISOPEN))
return 0;
(*linesw[tp->t_line].l_close)(tp, flag);
s = spltty();
CLR(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
bus_space_write_1(iot, ioh, com_ier, 0);
if (ISSET(tp->t_cflag, HUPCL) &&
!ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) {
/* XXX perhaps only clear DTR */
bus_space_write_1(iot, ioh, com_mcr, 0);
bus_space_write_1(iot, ioh, com_fifo,
FIFO_RCV_RST | FIFO_XMT_RST);
}
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
if (--comsopen == 0)
untimeout(comsoft, NULL);
splx(s);
ttyclose(tp);
#ifdef notyet /* XXXX */
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
ttyfree(tp);
sc->sc_tty = 0;
}
#endif
return 0;
}
int
comread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct com_softc *sc = com_cd.cd_devs[COMUNIT(dev)];
struct tty *tp = sc->sc_tty;
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
comwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
struct com_softc *sc = com_cd.cd_devs[COMUNIT(dev)];
struct tty *tp = sc->sc_tty;
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
struct tty *
comtty(dev)
dev_t dev;
{
struct com_softc *sc = com_cd.cd_devs[COMUNIT(dev)];
struct tty *tp = sc->sc_tty;
return (tp);
}
static u_char
tiocm_xxx2mcr(data)
int data;
{
u_char m = 0;
if (ISSET(data, TIOCM_DTR))
SET(m, MCR_DTR);
if (ISSET(data, TIOCM_RTS))
SET(m, MCR_RTS);
return m;
}
int
comioctl(dev, cmd, data, flag, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flag;
struct proc *p;
{
int unit = COMUNIT(dev);
struct com_softc *sc = com_cd.cd_devs[unit];
struct tty *tp = sc->sc_tty;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int error;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return error;
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return error;
switch (cmd) {
case TIOCSBRK:
SET(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
break;
case TIOCCBRK:
CLR(sc->sc_lcr, LCR_SBREAK);
bus_space_write_1(iot, ioh, com_lcr, sc->sc_lcr);
break;
case TIOCSDTR:
SET(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCCDTR:
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMSET:
CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
case TIOCMBIS:
SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMBIC:
CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data));
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
break;
case TIOCMGET: {
u_char m;
int bits = 0;
m = sc->sc_mcr;
if (ISSET(m, MCR_DTR))
SET(bits, TIOCM_DTR);
if (ISSET(m, MCR_RTS))
SET(bits, TIOCM_RTS);
m = sc->sc_msr;
if (ISSET(m, MSR_DCD))
SET(bits, TIOCM_CD);
if (ISSET(m, MSR_CTS))
SET(bits, TIOCM_CTS);
if (ISSET(m, MSR_DSR))
SET(bits, TIOCM_DSR);
if (ISSET(m, MSR_RI | MSR_TERI))
SET(bits, TIOCM_RI);
if (bus_space_read_1(iot, ioh, com_ier))
SET(bits, TIOCM_LE);
*(int *)data = bits;
break;
}
case TIOCGFLAGS: {
int driverbits, userbits = 0;
driverbits = sc->sc_swflags;
if (ISSET(driverbits, COM_SW_SOFTCAR))
SET(userbits, TIOCFLAG_SOFTCAR);
if (ISSET(driverbits, COM_SW_CLOCAL))
SET(userbits, TIOCFLAG_CLOCAL);
if (ISSET(driverbits, COM_SW_CRTSCTS))
SET(userbits, TIOCFLAG_CRTSCTS);
if (ISSET(driverbits, COM_SW_MDMBUF))
SET(userbits, TIOCFLAG_MDMBUF);
*(int *)data = userbits;
break;
}
case TIOCSFLAGS: {
int userbits, driverbits = 0;
error = suser(p->p_ucred, &p->p_acflag);
if (error != 0)
return(EPERM);
userbits = *(int *)data;
if (ISSET(userbits, TIOCFLAG_SOFTCAR) ||
ISSET(sc->sc_hwflags, COM_HW_CONSOLE))
SET(driverbits, COM_SW_SOFTCAR);
if (ISSET(userbits, TIOCFLAG_CLOCAL))
SET(driverbits, COM_SW_CLOCAL);
if (ISSET(userbits, TIOCFLAG_CRTSCTS))
SET(driverbits, COM_SW_CRTSCTS);
if (ISSET(userbits, TIOCFLAG_MDMBUF))
SET(driverbits, COM_SW_MDMBUF);
sc->sc_swflags = driverbits;
break;
}
default:
return ENOTTY;
}
return 0;
}
int
comparam(tp, t)
struct tty *tp;
struct termios *t;
{
struct com_softc *sc = com_cd.cd_devs[COMUNIT(tp->t_dev)];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int ospeed = comspeed(t->c_ospeed);
u_char lcr;
tcflag_t oldcflag;
int s;
/* check requested parameters */
if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed))
return EINVAL;
lcr = ISSET(sc->sc_lcr, LCR_SBREAK);
switch (ISSET(t->c_cflag, CSIZE)) {
case CS5:
SET(lcr, LCR_5BITS);
break;
case CS6:
SET(lcr, LCR_6BITS);
break;
case CS7:
SET(lcr, LCR_7BITS);
break;
case CS8:
SET(lcr, LCR_8BITS);
break;
}
if (ISSET(t->c_cflag, PARENB)) {
SET(lcr, LCR_PENAB);
if (!ISSET(t->c_cflag, PARODD))
SET(lcr, LCR_PEVEN);
}
if (ISSET(t->c_cflag, CSTOPB))
SET(lcr, LCR_STOPB);
sc->sc_lcr = lcr;
s = spltty();
if (ospeed == 0) {
CLR(sc->sc_mcr, MCR_DTR);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
/*
* Set the FIFO threshold based on the receive speed, if we are
* changing it.
*/
#if 0
if (tp->t_ispeed != t->c_ispeed) {
#else
if (1) {
#endif
if (ospeed != 0) {
/*
* Make sure the transmit FIFO is empty before
* proceeding. If we don't do this, some revisions
* of the UART will hang. Interestingly enough,
* even if we do this will the last character is
* still being pushed out, they don't hang. This
* seems good enough.
*/
while (ISSET(tp->t_state, TS_BUSY)) {
int error;
++sc->sc_halt;
error = ttysleep(tp, &tp->t_outq,
TTOPRI | PCATCH, "comprm", 0);
--sc->sc_halt;
if (error) {
splx(s);
comstart(tp);
return (error);
}
}
bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB);
bus_space_write_1(iot, ioh, com_dlbl, ospeed);
bus_space_write_1(iot, ioh, com_dlbh, ospeed >> 8);
bus_space_write_1(iot, ioh, com_lcr, lcr);
SET(sc->sc_mcr, MCR_DTR);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
} else
bus_space_write_1(iot, ioh, com_lcr, lcr);
if (!ISSET(sc->sc_hwflags, COM_HW_HAYESP) &&
ISSET(sc->sc_hwflags, COM_HW_FIFO))
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE |
(t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8));
} else
bus_space_write_1(iot, ioh, com_lcr, lcr);
/* When not using CRTSCTS, RTS follows DTR. */
if (!ISSET(t->c_cflag, CRTSCTS)) {
if (ISSET(sc->sc_mcr, MCR_DTR)) {
if (!ISSET(sc->sc_mcr, MCR_RTS)) {
SET(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
} else {
if (ISSET(sc->sc_mcr, MCR_RTS)) {
CLR(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
}
sc->sc_dtr = MCR_DTR | MCR_RTS;
} else
sc->sc_dtr = MCR_DTR;
/* and copy to tty */
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
oldcflag = tp->t_cflag;
tp->t_cflag = t->c_cflag;
/*
* If DCD is off and MDMBUF is changed, ask the tty layer if we should
* stop the device.
*/
if (!ISSET(sc->sc_msr, MSR_DCD) &&
!ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) &&
(*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
/* Just to be sure... */
splx(s);
comstart(tp);
return 0;
}
void
comstart(tp)
struct tty *tp;
{
struct com_softc *sc = com_cd.cd_devs[COMUNIT(tp->t_dev)];
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY))
goto out;
if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) ||
sc->sc_halt > 0)
goto stopped;
if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS))
goto stopped;
if (tp->t_outq.c_cc <= tp->t_lowat) {
if (ISSET(tp->t_state, TS_ASLEEP)) {
CLR(tp->t_state, TS_ASLEEP);
wakeup(&tp->t_outq);
}
if (tp->t_outq.c_cc == 0)
goto stopped;
selwakeup(&tp->t_wsel);
}
SET(tp->t_state, TS_BUSY);
if (!ISSET(sc->sc_ier, IER_ETXRDY)) {
SET(sc->sc_ier, IER_ETXRDY);
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
}
#ifdef COM_HAYESP
if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) {
u_char buffer[1024], *cp = buffer;
int n = q_to_b(&tp->t_outq, cp, sizeof buffer);
do
bus_space_write_1(iot, ioh, com_data, *cp++);
while (--n);
}
else
#endif
if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) {
u_char buffer[16], *cp = buffer;
int n = q_to_b(&tp->t_outq, cp, sizeof buffer);
do {
bus_space_write_1(iot, ioh, com_data, *cp++);
} while (--n);
} else
bus_space_write_1(iot, ioh, com_data, getc(&tp->t_outq));
out:
splx(s);
return;
stopped:
if (ISSET(sc->sc_ier, IER_ETXRDY)) {
CLR(sc->sc_ier, IER_ETXRDY);
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
}
splx(s);
}
/*
* Stop output on a line.
*/
void
comstop(tp, flag)
struct tty *tp;
int flag;
{
int s;
s = spltty();
if (ISSET(tp->t_state, TS_BUSY))
if (!ISSET(tp->t_state, TS_TTSTOP))
SET(tp->t_state, TS_FLUSH);
splx(s);
}
void
comdiag(arg)
void *arg;
{
struct com_softc *sc = arg;
int overflows, floods, failures;
int s;
s = spltty();
sc->sc_errors = 0;
overflows = sc->sc_overflows;
sc->sc_overflows = 0;
floods = sc->sc_floods;
sc->sc_floods = 0;
failures = sc->sc_failures;
sc->sc_failures = 0;
splx(s);
log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s, %d uart failure%s\n",
sc->sc_dev.dv_xname,
overflows, overflows == 1 ? "" : "s",
floods, floods == 1 ? "" : "s",
failures, failures == 1 ? "" : "s");
}
void
comsoft(arg)
void *arg;
{
int unit;
struct com_softc *sc;
struct tty *tp;
register u_char *ibufp;
u_char *ibufend;
register int c;
int s;
static int lsrmap[8] = {
0, TTY_PE,
TTY_FE, TTY_PE|TTY_FE,
TTY_FE, TTY_PE|TTY_FE,
TTY_FE, TTY_PE|TTY_FE
};
s = spltty();
if (comevents == 0) {
splx(s);
goto out;
}
comevents = 0;
splx(s);
for (unit = 0; unit < com_cd.cd_ndevs; unit++) {
sc = com_cd.cd_devs[unit];
if (sc == 0 || sc->sc_ibufp == sc->sc_ibuf)
continue;
tp = sc->sc_tty;
s = spltty();
ibufp = sc->sc_ibuf;
ibufend = sc->sc_ibufp;
if (ibufp == ibufend) {
splx(s);
continue;
}
sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ?
sc->sc_ibufs[1] : sc->sc_ibufs[0];
sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE;
if (tp == 0 || !ISSET(tp->t_state, TS_ISOPEN)) {
splx(s);
continue;
}
if (ISSET(tp->t_cflag, CRTSCTS) &&
!ISSET(sc->sc_mcr, MCR_RTS)) {
/* XXX */
SET(sc->sc_mcr, MCR_RTS);
bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr,
sc->sc_mcr);
}
splx(s);
while (ibufp < ibufend) {
c = *ibufp++;
if (*ibufp & LSR_OE) {
sc->sc_overflows++;
if (sc->sc_errors++ == 0)
timeout(comdiag, sc, 60 * hz);
}
/* This is ugly, but fast. */
c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2];
(*linesw[tp->t_line].l_rint)(c, tp);
}
}
out:
timeout(comsoft, NULL, 1);
}
int
comintr(arg)
void *arg;
{
struct com_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct tty *tp;
u_char iir, lsr, data, msr, delta;
#ifdef COM_DEBUG
int n;
struct {
u_char iir, lsr, msr;
} iter[32];
#endif
#ifdef COM_DEBUG
n = 0;
iter[n].iir =
#endif
iir = bus_space_read_1(iot, ioh, com_iir);
if (ISSET(iir, IIR_NOPEND))
return (0);
tp = sc->sc_tty;
for (;;) {
#ifdef COM_DEBUG
iter[n].lsr =
#endif
lsr = bus_space_read_1(iot, ioh, com_lsr);
if (ISSET(lsr, LSR_RXRDY)) {
register u_char *p = sc->sc_ibufp;
comevents = 1;
do {
data = bus_space_read_1(iot, ioh, com_data);
if (ISSET(lsr, LSR_BI)) {
#ifdef notdef
printf("break %02x %02x %02x %02x\n",
sc->sc_msr, sc->sc_mcr, sc->sc_lcr,
sc->sc_dtr);
#endif
#ifdef DDB
if (ISSET(sc->sc_hwflags,
COM_HW_CONSOLE)) {
Debugger();
goto next;
}
#endif
}
if (p >= sc->sc_ibufend) {
sc->sc_floods++;
if (sc->sc_errors++ == 0)
timeout(comdiag, sc, 60 * hz);
} else {
*p++ = data;
*p++ = lsr;
if (p == sc->sc_ibufhigh &&
ISSET(tp->t_cflag, CRTSCTS)) {
/* XXX */
CLR(sc->sc_mcr, MCR_RTS);
bus_space_write_1(iot, ioh,
com_mcr, sc->sc_mcr);
}
}
#ifdef DDB
next:
#endif
#ifdef COM_DEBUG
if (++n >= 32)
goto ohfudge;
iter[n].lsr =
#endif
lsr = bus_space_read_1(iot, ioh, com_lsr);
} while (ISSET(lsr, LSR_RXRDY));
sc->sc_ibufp = p;
} else {
#ifdef COM_DEBUG
if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE))
printf("weird lsr %02x\n", lsr);
#endif
if ((iir & IIR_IMASK) == IIR_RXRDY) {
sc->sc_failures++;
if (sc->sc_errors++ == 0)
timeout(comdiag, sc, 60 * hz);
bus_space_write_1(iot, ioh, com_ier, 0);
delay(10);
bus_space_write_1(iot, ioh, com_ier,
sc->sc_ier);
iir = IIR_NOPEND;
continue;
}
}
#ifdef COM_DEBUG
iter[n].msr =
#endif
msr = bus_space_read_1(iot, ioh, com_msr);
if (msr != sc->sc_msr) {
delta = msr ^ sc->sc_msr;
sc->sc_msr = msr;
if (ISSET(delta, MSR_DCD) &&
!ISSET(sc->sc_swflags, COM_SW_SOFTCAR) &&
(*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD)) == 0) {
CLR(sc->sc_mcr, sc->sc_dtr);
bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
}
if (ISSET(delta & msr, MSR_CTS) &&
ISSET(tp->t_cflag, CRTSCTS)) {
/* the line is up and we want to do rts/cts flow control */
(*linesw[tp->t_line].l_start)(tp);
}
}
if (ISSET(lsr, LSR_TXRDY) && ISSET(tp->t_state, TS_BUSY)) {
CLR(tp->t_state, TS_BUSY | TS_FLUSH);
if (sc->sc_halt > 0)
wakeup(&tp->t_outq);
(*linesw[tp->t_line].l_start)(tp);
}
#ifdef COM_DEBUG
if (++n >= 32)
goto ohfudge;
iter[n].iir =
#endif
iir = bus_space_read_1(iot, ioh, com_iir);
if (ISSET(iir, IIR_NOPEND))
return (1);
}
#ifdef COM_DEBUG
ohfudge:
printf("comintr: too many iterations");
for (n = 0; n < 32; n++) {
if ((n % 4) == 0)
printf("\ncomintr: iter[%02d]", n);
printf(" %02x %02x %02x", iter[n].iir, iter[n].lsr, iter[n].msr);
}
printf("\n");
printf("comintr: msr %02x mcr %02x lcr %02x ier %02x\n",
sc->sc_msr, sc->sc_mcr, sc->sc_lcr, sc->sc_ier);
printf("comintr: state %08x cc %d\n", sc->sc_tty->t_state,
sc->sc_tty->t_outq.c_cc);
return (1);
#endif
}
/*
* Following are all routines needed for COM to act as console
*/
#include <dev/cons.h>
void
comcnprobe(cp)
struct consdev *cp;
{
/* XXX NEEDS TO BE FIXED XXX */
bus_space_tag_t iot = 0;
bus_space_handle_t ioh;
int found;
if (bus_space_map(iot, CONADDR, COM_NPORTS, 0, &ioh)) {
cp->cn_pri = CN_DEAD;
return;
}
found = comprobe1(iot, ioh, CONADDR);
bus_space_unmap(iot, ioh, COM_NPORTS);
if (!found) {
cp->cn_pri = CN_DEAD;
return;
}
/* locate the major number */
for (commajor = 0; commajor < nchrdev; commajor++)
if (cdevsw[commajor].d_open == comopen)
break;
/* initialize required fields */
cp->cn_dev = makedev(commajor, CONUNIT);
#ifdef COMCONSOLE
cp->cn_pri = CN_REMOTE; /* Force a serial port console */
#else
cp->cn_pri = CN_NORMAL;
#endif
}
void
comcninit(cp)
struct consdev *cp;
{
#if 0
XXX NEEDS TO BE FIXED XXX
comconstag = ???;
#endif
if (bus_space_map(comconstag, CONADDR, COM_NPORTS, 0, &comconsbah))
panic("comcninit: mapping failed");
cominit(comconstag, comconsbah, comdefaultrate);
comconsaddr = CONADDR;
}
void
cominit(iot, ioh, rate)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int rate;
{
int s = splhigh();
u_char stat;
bus_space_write_1(iot, ioh, com_lcr, LCR_DLAB);
rate = comspeed(comdefaultrate);
bus_space_write_1(iot, ioh, com_dlbl, rate);
bus_space_write_1(iot, ioh, com_dlbh, rate >> 8);
bus_space_write_1(iot, ioh, com_lcr, LCR_8BITS);
bus_space_write_1(iot, ioh, com_ier, IER_ERXRDY | IER_ETXRDY);
bus_space_write_1(iot, ioh, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1);
bus_space_write_1(iot, ioh, com_mcr, MCR_DTR | MCR_RTS);
DELAY(100);
stat = bus_space_read_1(iot, ioh, com_iir);
splx(s);
}
int
comcngetc(dev)
dev_t dev;
{
int s = splhigh();
bus_space_tag_t iot = comconstag;
bus_space_handle_t ioh = comconsbah;
u_char stat, c;
while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_RXRDY))
;
c = bus_space_read_1(iot, ioh, com_data);
stat = bus_space_read_1(iot, ioh, com_iir);
splx(s);
return c;
}
/*
* Console kernel output character routine.
*/
void
comcnputc(dev, c)
dev_t dev;
int c;
{
int s = splhigh();
bus_space_tag_t iot = comconstag;
bus_space_handle_t ioh = comconsbah;
u_char stat;
register int timo;
/* wait for any pending transmission to finish */
timo = 50000;
while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo)
;
bus_space_write_1(iot, ioh, com_data, c);
/* wait for this transmission to complete */
timo = 1500000;
while (!ISSET(stat = bus_space_read_1(iot, ioh, com_lsr), LSR_TXRDY) && --timo)
;
/* clear any interrupts generated by this transmission */
stat = bus_space_read_1(iot, ioh, com_iir);
splx(s);
}
void
comcnpollc(dev, on)
dev_t dev;
int on;
{
}