1094 lines
24 KiB
C
1094 lines
24 KiB
C
/* $NetBSD: zs.c,v 1.4 1998/09/02 05:51:37 eeh Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1996 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Gordon W. Ross.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Zilog Z8530 Dual UART driver (machine-dependent part)
|
|
*
|
|
* Runs two serial lines per chip using slave drivers.
|
|
* Plain tty/async lines use the zs_async slave.
|
|
* Sun keyboard/mouse uses the zs_kbd/zs_ms slaves.
|
|
*/
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/device.h>
|
|
#include <sys/file.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/time.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <machine/autoconf.h>
|
|
#include <machine/openfirm.h>
|
|
#include <machine/bsd_openprom.h>
|
|
#include <machine/conf.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/eeprom.h>
|
|
#include <machine/psl.h>
|
|
#include <machine/z8530var.h>
|
|
|
|
#include <dev/cons.h>
|
|
#include <dev/ic/z8530reg.h>
|
|
|
|
#include <sparc64/sparc64/vaddrs.h>
|
|
#include <sparc64/sparc64/auxreg.h>
|
|
#include <sparc64/dev/cons.h>
|
|
|
|
#include "kbd.h" /* NKBD */
|
|
#include "zs.h" /* NZS */
|
|
|
|
/* Make life easier for the initialized arrays here. */
|
|
#if NZS < 3
|
|
#undef NZS
|
|
#define NZS 3
|
|
#endif
|
|
|
|
/*
|
|
* Some warts needed by z8530tty.c -
|
|
* The default parity REALLY needs to be the same as the PROM uses,
|
|
* or you can not see messages done with printf during boot-up...
|
|
*/
|
|
int zs_def_cflag = (CREAD | CS8 | HUPCL);
|
|
int zs_major = 12;
|
|
|
|
/*
|
|
* The Sun provides a 4.9152 MHz clock to the ZS chips.
|
|
*/
|
|
#define PCLK (9600 * 512) /* PCLK pin input clock rate */
|
|
|
|
/*
|
|
* Select software interrupt bit based on TTY ipl.
|
|
*/
|
|
#if PIL_TTY == 1
|
|
# define IE_ZSSOFT IE_L1
|
|
#elif PIL_TTY == 4
|
|
# define IE_ZSSOFT IE_L4
|
|
#elif PIL_TTY == 6
|
|
# define IE_ZSSOFT IE_L6
|
|
#else
|
|
# error "no suitable software interrupt bit"
|
|
#endif
|
|
|
|
#define ZS_DELAY() (CPU_ISSUN4C ? (0) : delay(2))
|
|
|
|
/* The layout of this is hardware-dependent (padding, order). */
|
|
struct zschan {
|
|
volatile u_char zc_csr; /* ctrl,status, and indirect access */
|
|
u_char zc_xxx0;
|
|
volatile u_char zc_data; /* data */
|
|
u_char zc_xxx1;
|
|
};
|
|
struct zsdevice {
|
|
/* Yes, they are backwards. */
|
|
struct zschan zs_chan_b;
|
|
struct zschan zs_chan_a;
|
|
};
|
|
|
|
/* Saved PROM mappings */
|
|
static struct zsdevice *zsaddr[NZS];
|
|
|
|
/* Flags from cninit() */
|
|
static int zs_hwflags[NZS][2];
|
|
|
|
/* Default speed for each channel */
|
|
static int zs_defspeed[NZS][2] = {
|
|
{ 9600, /* ttya */
|
|
9600 }, /* ttyb */
|
|
{ 1200, /* keyboard */
|
|
1200 }, /* mouse */
|
|
{ 9600, /* ttyc */
|
|
9600 }, /* ttyd */
|
|
};
|
|
|
|
static u_char zs_init_reg[16] = {
|
|
0, /* 0: CMD (reset, etc.) */
|
|
0, /* 1: No interrupts yet. */
|
|
0, /* 2: IVECT */
|
|
ZSWR3_RX_8 | ZSWR3_RX_ENABLE,
|
|
ZSWR4_CLK_X16 | ZSWR4_ONESB | ZSWR4_EVENP,
|
|
ZSWR5_TX_8 | ZSWR5_TX_ENABLE,
|
|
0, /* 6: TXSYNC/SYNCLO */
|
|
0, /* 7: RXSYNC/SYNCHI */
|
|
0, /* 8: alias for data port */
|
|
ZSWR9_MASTER_IE | ZSWR9_NO_VECTOR,
|
|
0, /*10: Misc. TX/RX control bits */
|
|
ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD,
|
|
14, /*12: BAUDLO (default=9600) */
|
|
0, /*13: BAUDHI (default=9600) */
|
|
ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK,
|
|
ZSWR15_BREAK_IE | ZSWR15_DCD_IE,
|
|
};
|
|
|
|
struct zschan *
|
|
zs_get_chan_addr(zs_unit, channel)
|
|
int zs_unit, channel;
|
|
{
|
|
struct zsdevice *addr;
|
|
struct zschan *zc;
|
|
|
|
if (zs_unit >= NZS)
|
|
return (NULL);
|
|
addr = zsaddr[zs_unit];
|
|
if (addr == NULL)
|
|
addr = zsaddr[zs_unit] = findzs(zs_unit);
|
|
if (addr == NULL)
|
|
return (NULL);
|
|
if (channel == 0) {
|
|
zc = &addr->zs_chan_a;
|
|
} else {
|
|
zc = &addr->zs_chan_b;
|
|
}
|
|
return (zc);
|
|
}
|
|
|
|
|
|
/****************************************************************
|
|
* Autoconfig
|
|
****************************************************************/
|
|
|
|
/* Definition of the driver for autoconfig. */
|
|
static int zs_match_sbus __P((struct device *, struct cfdata *, void *));
|
|
static int zs_match_mainbus __P((struct device *, struct cfdata *, void *));
|
|
static int zs_match_obio __P((struct device *, struct cfdata *, void *));
|
|
static void zs_attach_sbus __P((struct device *, struct device *, void *));
|
|
static void zs_attach_mainbus __P((struct device *, struct device *, void *));
|
|
static void zs_attach_obio __P((struct device *, struct device *, void *));
|
|
|
|
static void zs_attach __P((struct zsc_softc *, int));
|
|
static int zs_print __P((void *, const char *name));
|
|
|
|
struct cfattach zs_ca = {
|
|
sizeof(struct zsc_softc), zs_match_sbus, zs_attach_sbus
|
|
};
|
|
|
|
struct cfattach zs_mainbus_ca = {
|
|
sizeof(struct zsc_softc), zs_match_mainbus, zs_attach_mainbus
|
|
};
|
|
|
|
struct cfattach zs_obio_ca = {
|
|
sizeof(struct zsc_softc), zs_match_obio, zs_attach_obio
|
|
};
|
|
|
|
extern struct cfdriver zs_cd;
|
|
|
|
/* Interrupt handlers. */
|
|
static int zshard __P((void *));
|
|
static int zssoft __P((void *));
|
|
static struct intrhand levelsoft = { zssoft };
|
|
|
|
static int zs_get_speed __P((struct zs_chanstate *));
|
|
|
|
|
|
/*
|
|
* Is the zs chip present?
|
|
*/
|
|
static int
|
|
zs_match_mainbus(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct mainbus_attach_args *ma = aux;
|
|
|
|
if (strcmp(cf->cf_driver->cd_name, ma->ma_name) != 0)
|
|
return (0);
|
|
|
|
return (getpropint(ma->ma_node, "slave", -2) == cf->cf_unit);
|
|
}
|
|
|
|
static int
|
|
zs_match_sbus(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct sbus_attach_args *sa = aux;
|
|
|
|
if (strcmp(cf->cf_driver->cd_name, sa->sa_name) != 0)
|
|
return (0);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
zs_match_obio(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
union obio_attach_args *uoba = aux;
|
|
struct obio4_attach_args *oba;
|
|
|
|
if (uoba->uoba_isobio4 == 0) {
|
|
struct sbus_attach_args *sa = &uoba->uoba_sbus;
|
|
|
|
if (strcmp(cf->cf_driver->cd_name, sa->sa_name) != 0)
|
|
return (0);
|
|
|
|
return (getpropint(sa->sa_node, "slave", -2) == cf->cf_unit);
|
|
}
|
|
|
|
oba = &uoba->uoba_oba4;
|
|
return (bus_space_probe(oba->oba_bustag, 0, oba->oba_paddr,
|
|
1, 0, 0, NULL, NULL));
|
|
}
|
|
|
|
static void
|
|
zs_attach_mainbus(parent, self, aux)
|
|
struct device *parent;
|
|
struct device *self;
|
|
void *aux;
|
|
{
|
|
struct zsc_softc *zsc = (void *) self;
|
|
struct mainbus_attach_args *ma = aux;
|
|
int zs_unit = zsc->zsc_dev.dv_unit;
|
|
|
|
zsc->zsc_bustag = ma->ma_bustag;
|
|
zsc->zsc_dmatag = ma->ma_dmatag;
|
|
|
|
/* Use the mapping setup by the Sun PROM. */
|
|
if (zsaddr[zs_unit] == NULL)
|
|
zsaddr[zs_unit] = findzs(zs_unit);
|
|
if ((void*)zsaddr[zs_unit] != (void*)(long)ma->ma_address[0])
|
|
panic("zsattach_mainbus");
|
|
zs_attach(zsc, ma->ma_pri);
|
|
}
|
|
|
|
|
|
static void
|
|
zs_attach_sbus(parent, self, aux)
|
|
struct device *parent;
|
|
struct device *self;
|
|
void *aux;
|
|
{
|
|
struct zsc_softc *zsc = (void *) self;
|
|
struct sbus_attach_args *sa = aux;
|
|
int zs_unit = zsc->zsc_dev.dv_unit;
|
|
|
|
zsc->zsc_bustag = sa->sa_bustag;
|
|
zsc->zsc_dmatag = sa->sa_dmatag;
|
|
|
|
/* Use the mapping setup by the Sun PROM. */
|
|
if (zsaddr[zs_unit] == NULL)
|
|
zsaddr[zs_unit] = findzs(zs_unit);
|
|
zs_attach(zsc, sa->sa_pri);
|
|
}
|
|
|
|
static void
|
|
zs_attach_obio(parent, self, aux)
|
|
struct device *parent;
|
|
struct device *self;
|
|
void *aux;
|
|
{
|
|
struct zsc_softc *zsc = (void *) self;
|
|
union obio_attach_args *uoba = aux;
|
|
int zs_unit = zsc->zsc_dev.dv_unit;
|
|
|
|
/* Use the mapping setup by the Sun PROM. */
|
|
if (zsaddr[zs_unit] == NULL)
|
|
zsaddr[zs_unit] = findzs(zs_unit);
|
|
|
|
if (uoba->uoba_isobio4 == 0) {
|
|
struct sbus_attach_args *sa = &uoba->uoba_sbus;
|
|
zsc->zsc_bustag = sa->sa_bustag;
|
|
zsc->zsc_dmatag = sa->sa_dmatag;
|
|
zs_attach(zsc, sa->sa_pri);
|
|
} else {
|
|
struct obio4_attach_args *oba = &uoba->uoba_oba4;
|
|
zsc->zsc_bustag = oba->oba_bustag;
|
|
zsc->zsc_dmatag = oba->oba_dmatag;
|
|
zs_attach(zsc, oba->oba_pri);
|
|
}
|
|
}
|
|
/*
|
|
* Attach a found zs.
|
|
*
|
|
* USE ROM PROPERTIES port-a-ignore-cd AND port-b-ignore-cd FOR
|
|
* SOFT CARRIER, AND keyboard PROPERTY FOR KEYBOARD/MOUSE?
|
|
*/
|
|
static void
|
|
zs_attach(zsc, pri)
|
|
struct zsc_softc *zsc;
|
|
int pri;
|
|
{
|
|
struct zsc_attach_args zsc_args;
|
|
volatile struct zschan *zc;
|
|
struct zs_chanstate *cs;
|
|
int s, zs_unit, channel;
|
|
static int didintr, prevpri;
|
|
|
|
printf(" softpri %d\n", PIL_TTY);
|
|
|
|
/*
|
|
* Initialize software state for each channel.
|
|
*/
|
|
zs_unit = zsc->zsc_dev.dv_unit;
|
|
for (channel = 0; channel < 2; channel++) {
|
|
zsc_args.channel = channel;
|
|
zsc_args.hwflags = zs_hwflags[zs_unit][channel];
|
|
cs = &zsc->zsc_cs_store[channel];
|
|
zsc->zsc_cs[channel] = cs;
|
|
|
|
cs->cs_channel = channel;
|
|
cs->cs_private = NULL;
|
|
cs->cs_ops = &zsops_null;
|
|
cs->cs_brg_clk = PCLK / 16;
|
|
|
|
zc = zs_get_chan_addr(zs_unit, channel);
|
|
cs->cs_reg_csr = &zc->zc_csr;
|
|
cs->cs_reg_data = &zc->zc_data;
|
|
|
|
bcopy(zs_init_reg, cs->cs_creg, 16);
|
|
bcopy(zs_init_reg, cs->cs_preg, 16);
|
|
|
|
/* XXX: Get these from the PROM properties! */
|
|
/* XXX: See the mvme167 code. Better. */
|
|
if (zsc_args.hwflags & ZS_HWFLAG_CONSOLE)
|
|
cs->cs_defspeed = zs_get_speed(cs);
|
|
else
|
|
cs->cs_defspeed = zs_defspeed[zs_unit][channel];
|
|
cs->cs_defcflag = zs_def_cflag;
|
|
|
|
/* Make these correspond to cs_defcflag (-crtscts) */
|
|
cs->cs_rr0_dcd = ZSRR0_DCD;
|
|
cs->cs_rr0_cts = 0;
|
|
cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS;
|
|
cs->cs_wr5_rts = 0;
|
|
|
|
/*
|
|
* Clear the master interrupt enable.
|
|
* The INTENA is common to both channels,
|
|
* so just do it on the A channel.
|
|
*/
|
|
if (channel == 0) {
|
|
zs_write_reg(cs, 9, 0);
|
|
}
|
|
|
|
/*
|
|
* Look for a child driver for this channel.
|
|
* The child attach will setup the hardware.
|
|
*/
|
|
if (!config_found(&zsc->zsc_dev, (void *)&zsc_args, zs_print)) {
|
|
/* No sub-driver. Just reset it. */
|
|
u_char reset = (channel == 0) ?
|
|
ZSWR9_A_RESET : ZSWR9_B_RESET;
|
|
s = splzs();
|
|
zs_write_reg(cs, 9, reset);
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now safe to install interrupt handlers. Note the arguments
|
|
* to the interrupt handlers aren't used. Note, we only do this
|
|
* once since both SCCs interrupt at the same level and vector.
|
|
*/
|
|
if (!didintr) {
|
|
didintr = 1;
|
|
prevpri = pri;
|
|
bus_intr_establish(zsc->zsc_bustag, pri, 0, zshard, NULL);
|
|
intr_establish(PIL_TTY, &levelsoft);
|
|
} else if (pri != prevpri)
|
|
panic("broken zs interrupt scheme");
|
|
|
|
evcnt_attach(&zsc->zsc_dev, "intr", &zsc->zsc_intrcnt);
|
|
|
|
/*
|
|
* Set the master interrupt enable and interrupt vector.
|
|
* (common to both channels, do it on A)
|
|
*/
|
|
cs = zsc->zsc_cs[0];
|
|
s = splhigh();
|
|
/* interrupt vector */
|
|
zs_write_reg(cs, 2, zs_init_reg[2]);
|
|
/* master interrupt control (enable) */
|
|
zs_write_reg(cs, 9, zs_init_reg[9]);
|
|
splx(s);
|
|
|
|
#if 0
|
|
/*
|
|
* XXX: L1A hack - We would like to be able to break into
|
|
* the debugger during the rest of autoconfiguration, so
|
|
* lower interrupts just enough to let zs interrupts in.
|
|
* This is done after both zs devices are attached.
|
|
*/
|
|
if (zs_unit == 1) {
|
|
printf("zs1: enabling zs interrupts\n");
|
|
(void)splfd(); /* XXX: splzs - 1 */
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
zs_print(aux, name)
|
|
void *aux;
|
|
const char *name;
|
|
{
|
|
struct zsc_attach_args *args = aux;
|
|
|
|
if (name != NULL)
|
|
printf("%s: ", name);
|
|
|
|
if (args->channel != -1)
|
|
printf(" channel %d", args->channel);
|
|
|
|
return (UNCONF);
|
|
}
|
|
|
|
static volatile int zssoftpending;
|
|
|
|
/*
|
|
* Our ZS chips all share a common, autovectored interrupt,
|
|
* so we have to look at all of them on each interrupt.
|
|
*/
|
|
static int
|
|
zshard(arg)
|
|
void *arg;
|
|
{
|
|
register struct zsc_softc *zsc;
|
|
register int unit, rr3, rval, softreq;
|
|
|
|
rval = softreq = 0;
|
|
for (unit = 0; unit < zs_cd.cd_ndevs; unit++) {
|
|
zsc = zs_cd.cd_devs[unit];
|
|
if (zsc == NULL)
|
|
continue;
|
|
rr3 = zsc_intr_hard(zsc);
|
|
/* Count up the interrupts. */
|
|
if (rr3) {
|
|
rval |= rr3;
|
|
zsc->zsc_intrcnt.ev_count++;
|
|
}
|
|
softreq |= zsc->zsc_cs[0]->cs_softreq;
|
|
softreq |= zsc->zsc_cs[1]->cs_softreq;
|
|
}
|
|
|
|
/* We are at splzs here, so no need to lock. */
|
|
if (softreq && (zssoftpending == 0)) {
|
|
zssoftpending = IE_ZSSOFT;
|
|
#if defined(SUN4M)
|
|
if (CPU_ISSUN4M)
|
|
raise(0, PIL_TTY);
|
|
else
|
|
#endif
|
|
ienab_bis(IE_ZSSOFT);
|
|
}
|
|
return (rval);
|
|
}
|
|
|
|
/*
|
|
* Similar scheme as for zshard (look at all of them)
|
|
*/
|
|
static int
|
|
zssoft(arg)
|
|
void *arg;
|
|
{
|
|
register struct zsc_softc *zsc;
|
|
register int s, unit;
|
|
|
|
/* This is not the only ISR on this IPL. */
|
|
if (zssoftpending == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* The soft intr. bit will be set by zshard only if
|
|
* the variable zssoftpending is zero. The order of
|
|
* these next two statements prevents our clearing
|
|
* the soft intr bit just after zshard has set it.
|
|
*/
|
|
/* ienab_bic(IE_ZSSOFT); */
|
|
zssoftpending = 0;
|
|
|
|
/* Make sure we call the tty layer at spltty. */
|
|
s = spltty();
|
|
for (unit = 0; unit < zs_cd.cd_ndevs; unit++) {
|
|
zsc = zs_cd.cd_devs[unit];
|
|
if (zsc == NULL)
|
|
continue;
|
|
(void)zsc_intr_soft(zsc);
|
|
}
|
|
splx(s);
|
|
return (1);
|
|
}
|
|
|
|
|
|
/*
|
|
* Compute the current baud rate given a ZS channel.
|
|
*/
|
|
static int
|
|
zs_get_speed(cs)
|
|
struct zs_chanstate *cs;
|
|
{
|
|
int tconst;
|
|
|
|
tconst = zs_read_reg(cs, 12);
|
|
tconst |= zs_read_reg(cs, 13) << 8;
|
|
return (TCONST_TO_BPS(cs->cs_brg_clk, tconst));
|
|
}
|
|
|
|
/*
|
|
* MD functions for setting the baud rate and control modes.
|
|
*/
|
|
int
|
|
zs_set_speed(cs, bps)
|
|
struct zs_chanstate *cs;
|
|
int bps; /* bits per second */
|
|
{
|
|
int tconst, real_bps;
|
|
|
|
if (bps == 0)
|
|
return (0);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (cs->cs_brg_clk == 0)
|
|
panic("zs_set_speed");
|
|
#endif
|
|
|
|
tconst = BPS_TO_TCONST(cs->cs_brg_clk, bps);
|
|
if (tconst < 0)
|
|
return (EINVAL);
|
|
|
|
/* Convert back to make sure we can do it. */
|
|
real_bps = TCONST_TO_BPS(cs->cs_brg_clk, tconst);
|
|
|
|
/* XXX - Allow some tolerance here? */
|
|
if (real_bps != bps)
|
|
return (EINVAL);
|
|
|
|
cs->cs_preg[12] = tconst;
|
|
cs->cs_preg[13] = tconst >> 8;
|
|
|
|
/* Caller will stuff the pending registers. */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zs_set_modes(cs, cflag)
|
|
struct zs_chanstate *cs;
|
|
int cflag; /* bits per second */
|
|
{
|
|
int s;
|
|
|
|
/*
|
|
* Output hardware flow control on the chip is horrendous:
|
|
* if carrier detect drops, the receiver is disabled, and if
|
|
* CTS drops, the transmitter is stoped IN MID CHARACTER!
|
|
* Therefore, NEVER set the HFC bit, and instead use the
|
|
* status interrupt to detect CTS changes.
|
|
*/
|
|
s = splzs();
|
|
if ((cflag & (CLOCAL | MDMBUF)) != 0)
|
|
cs->cs_rr0_dcd = 0;
|
|
else
|
|
cs->cs_rr0_dcd = ZSRR0_DCD;
|
|
if ((cflag & CRTSCTS) != 0) {
|
|
cs->cs_wr5_dtr = ZSWR5_DTR;
|
|
cs->cs_wr5_rts = ZSWR5_RTS;
|
|
cs->cs_rr0_cts = ZSRR0_CTS;
|
|
} else if ((cflag & CDTRCTS) != 0) {
|
|
cs->cs_wr5_dtr = 0;
|
|
cs->cs_wr5_rts = ZSWR5_DTR;
|
|
cs->cs_rr0_cts = ZSRR0_CTS;
|
|
} else if ((cflag & MDMBUF) != 0) {
|
|
cs->cs_wr5_dtr = 0;
|
|
cs->cs_wr5_rts = ZSWR5_DTR;
|
|
cs->cs_rr0_cts = ZSRR0_DCD;
|
|
} else {
|
|
cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS;
|
|
cs->cs_wr5_rts = 0;
|
|
cs->cs_rr0_cts = 0;
|
|
}
|
|
splx(s);
|
|
|
|
/* Caller will stuff the pending registers. */
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Read or write the chip with suitable delays.
|
|
*/
|
|
|
|
u_char
|
|
zs_read_reg(cs, reg)
|
|
struct zs_chanstate *cs;
|
|
u_char reg;
|
|
{
|
|
u_char val;
|
|
|
|
*cs->cs_reg_csr = reg;
|
|
ZS_DELAY();
|
|
val = *cs->cs_reg_csr;
|
|
ZS_DELAY();
|
|
return (val);
|
|
}
|
|
|
|
void
|
|
zs_write_reg(cs, reg, val)
|
|
struct zs_chanstate *cs;
|
|
u_char reg, val;
|
|
{
|
|
*cs->cs_reg_csr = reg;
|
|
ZS_DELAY();
|
|
*cs->cs_reg_csr = val;
|
|
ZS_DELAY();
|
|
}
|
|
|
|
u_char
|
|
zs_read_csr(cs)
|
|
struct zs_chanstate *cs;
|
|
{
|
|
register u_char val;
|
|
|
|
val = *cs->cs_reg_csr;
|
|
ZS_DELAY();
|
|
return (val);
|
|
}
|
|
|
|
void zs_write_csr(cs, val)
|
|
struct zs_chanstate *cs;
|
|
u_char val;
|
|
{
|
|
*cs->cs_reg_csr = val;
|
|
ZS_DELAY();
|
|
}
|
|
|
|
u_char zs_read_data(cs)
|
|
struct zs_chanstate *cs;
|
|
{
|
|
register u_char val;
|
|
|
|
val = *cs->cs_reg_data;
|
|
ZS_DELAY();
|
|
return (val);
|
|
}
|
|
|
|
void zs_write_data(cs, val)
|
|
struct zs_chanstate *cs;
|
|
u_char val;
|
|
{
|
|
*cs->cs_reg_data = val;
|
|
ZS_DELAY();
|
|
}
|
|
|
|
/****************************************************************
|
|
* Console support functions (Sun specific!)
|
|
* Note: this code is allowed to know about the layout of
|
|
* the chip registers, and uses that to keep things simple.
|
|
* XXX - I think I like the mvme167 code better. -gwr
|
|
****************************************************************/
|
|
|
|
extern void Debugger __P((void));
|
|
void *zs_conschan;
|
|
|
|
/*
|
|
* Handle user request to enter kernel debugger.
|
|
*/
|
|
void
|
|
zs_abort(cs)
|
|
struct zs_chanstate *cs;
|
|
{
|
|
register volatile struct zschan *zc = zs_conschan;
|
|
int rr0;
|
|
|
|
/* Wait for end of break to avoid PROM abort. */
|
|
/* XXX - Limit the wait? */
|
|
do {
|
|
rr0 = zc->zc_csr;
|
|
ZS_DELAY();
|
|
} while (rr0 & ZSRR0_BREAK);
|
|
|
|
#if defined(KGDB)
|
|
zskgdb(cs);
|
|
#elif defined(DDB)
|
|
Debugger();
|
|
#else
|
|
printf("stopping on keyboard abort\n");
|
|
callrom();
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Polled input char.
|
|
*/
|
|
int
|
|
zs_getc(arg)
|
|
void *arg;
|
|
{
|
|
register volatile struct zschan *zc = arg;
|
|
register int s, c, rr0;
|
|
|
|
s = splhigh();
|
|
/* Wait for a character to arrive. */
|
|
do {
|
|
rr0 = zc->zc_csr;
|
|
ZS_DELAY();
|
|
} while ((rr0 & ZSRR0_RX_READY) == 0);
|
|
|
|
c = zc->zc_data;
|
|
ZS_DELAY();
|
|
splx(s);
|
|
|
|
/*
|
|
* This is used by the kd driver to read scan codes,
|
|
* so don't translate '\r' ==> '\n' here...
|
|
*/
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* Polled output char.
|
|
*/
|
|
void
|
|
zs_putc(arg, c)
|
|
void *arg;
|
|
int c;
|
|
{
|
|
register volatile struct zschan *zc = arg;
|
|
register int s, rr0;
|
|
|
|
s = splhigh();
|
|
|
|
/* Wait for transmitter to become ready. */
|
|
do {
|
|
rr0 = zc->zc_csr;
|
|
ZS_DELAY();
|
|
} while ((rr0 & ZSRR0_TX_READY) == 0);
|
|
|
|
/*
|
|
* Send the next character.
|
|
* Now you'd think that this could be followed by a ZS_DELAY()
|
|
* just like all the other chip accesses, but it turns out that
|
|
* the `transmit-ready' interrupt isn't de-asserted until
|
|
* some period of time after the register write completes
|
|
* (more than a couple instructions). So to avoid stray
|
|
* interrupts we put in the 2us delay regardless of cpu model.
|
|
*/
|
|
zc->zc_data = c;
|
|
delay(2);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
/*****************************************************************/
|
|
|
|
static void zscninit __P((struct consdev *));
|
|
static int zscngetc __P((dev_t));
|
|
static void zscnputc __P((dev_t, int));
|
|
|
|
/*
|
|
* Console table shared by ttya, ttyb
|
|
*/
|
|
struct consdev consdev_tty = {
|
|
nullcnprobe,
|
|
zscninit,
|
|
zscngetc,
|
|
zscnputc,
|
|
nullcnpollc,
|
|
};
|
|
|
|
static void
|
|
zscninit(cn)
|
|
struct consdev *cn;
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Polled console input putchar.
|
|
*/
|
|
static int
|
|
zscngetc(dev)
|
|
dev_t dev;
|
|
{
|
|
return (zs_getc(zs_conschan));
|
|
}
|
|
|
|
/*
|
|
* Polled console output putchar.
|
|
*/
|
|
static void
|
|
zscnputc(dev, c)
|
|
dev_t dev;
|
|
int c;
|
|
{
|
|
zs_putc(zs_conschan, c);
|
|
}
|
|
|
|
/*****************************************************************/
|
|
|
|
static void prom_cninit __P((struct consdev *));
|
|
static int prom_cngetc __P((dev_t));
|
|
static void prom_cnputc __P((dev_t, int));
|
|
|
|
int stdin = NULL, stdout = NULL;
|
|
|
|
/*
|
|
* The console is set to this one initially,
|
|
* which lets us use the PROM until consinit()
|
|
* is called to select a real console.
|
|
*/
|
|
struct consdev consdev_prom = {
|
|
nullcnprobe,
|
|
prom_cninit,
|
|
prom_cngetc,
|
|
prom_cnputc,
|
|
nullcnpollc,
|
|
};
|
|
|
|
/*
|
|
* The console table pointer is statically initialized
|
|
* to point to the PROM (output only) table, so that
|
|
* early calls to printf will work.
|
|
*/
|
|
struct consdev *cn_tab = &consdev_prom;
|
|
|
|
void
|
|
nullcnprobe(cn)
|
|
struct consdev *cn;
|
|
{
|
|
}
|
|
|
|
static void
|
|
prom_cninit(cn)
|
|
struct consdev *cn;
|
|
{
|
|
}
|
|
|
|
/*
|
|
* PROM console input putchar.
|
|
* (dummy - this is output only)
|
|
*/
|
|
static int
|
|
prom_cngetc(dev)
|
|
dev_t dev;
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* PROM console output putchar.
|
|
*/
|
|
static void
|
|
prom_cnputc(dev, c)
|
|
dev_t dev;
|
|
int c;
|
|
{
|
|
int s;
|
|
char c0 = (c & 0x7f);
|
|
|
|
if (!stdout) {
|
|
int node = OF_finddevice("/chosen");
|
|
OF_getprop(node, "stdout", &stdout, sizeof(stdout));
|
|
}
|
|
|
|
s = splhigh();
|
|
OF_write(stdout, &c0, 1);
|
|
splx(s);
|
|
}
|
|
|
|
/*****************************************************************/
|
|
|
|
extern struct consdev consdev_kd;
|
|
|
|
static char *prom_inSrc_name[] = {
|
|
"keyboard/display",
|
|
"ttya", "ttyb",
|
|
"ttyc", "ttyd" };
|
|
|
|
/*
|
|
* This function replaces sys/dev/cninit.c
|
|
* Determine which device is the console using
|
|
* the PROM "input source" and "output sink".
|
|
*/
|
|
void
|
|
consinit()
|
|
{
|
|
struct zschan *zc;
|
|
struct consdev *cn;
|
|
int channel, zs_unit, zstty_unit;
|
|
int inSource, outSink;
|
|
register int node;
|
|
char buffer[128];
|
|
register char *cp;
|
|
extern int fbnode;
|
|
|
|
prom_printf("consinit()\r\n");
|
|
if (cn_tab != &consdev_prom) return;
|
|
|
|
inSource = outSink = -1;
|
|
|
|
prom_printf("setting up stdin\r\n");
|
|
node = OF_finddevice("/chosen");
|
|
OF_getprop(node, "stdin", &stdin, sizeof(stdin));
|
|
prom_printf("stdin instance = %x\r\n", stdin);
|
|
|
|
node = OF_instance_to_package(stdin);
|
|
prom_printf("stdin package = %x\r\n", node);
|
|
if (OF_getproplen(node,"keyboard") >= 0) {
|
|
inSource = PROMDEV_KBD;
|
|
goto setup_output;
|
|
}
|
|
if (strcmp(getpropstring(node,"device_type"),"serial") != 0) {
|
|
/* not a serial, not keyboard. what is it?!? */
|
|
inSource = -1;
|
|
goto setup_output;
|
|
}
|
|
/*
|
|
* At this point we assume the device path is in the form
|
|
* ....device@x,y:a for ttya and ...device@x,y:b for ttyb.
|
|
* If it isn't, we defer to the ROM
|
|
*/
|
|
if(OF_instance_to_path(stdin, buffer, sizeof(buffer)) <= 0) {
|
|
printf("consinit: bogus stdin path.\n");
|
|
goto setup_output;
|
|
}
|
|
cp = buffer;
|
|
while (*cp)
|
|
cp++;
|
|
cp -= 2;
|
|
#ifdef DEBUG
|
|
if (cp < buffer)
|
|
panic("consinit: bad stdin path %s",buffer);
|
|
#endif
|
|
/* XXX: only allows tty's a->z, assumes PROMDEV_TTYx contig */
|
|
if (cp[0]==':' && cp[1] >= 'a' && cp[1] <= 'z')
|
|
inSource = PROMDEV_TTYA + (cp[1] - 'a');
|
|
/* else use rom */
|
|
setup_output:
|
|
prom_printf("setting up stdout\r\n");
|
|
node = OF_finddevice("/chosen");
|
|
OF_getprop(node, "stdout", &stdout, sizeof(stdout));
|
|
|
|
prom_printf("stdout instance = %x\r\n", stdout);
|
|
|
|
node = OF_instance_to_package(stdout);
|
|
prom_printf("stdout package = %x\r\n", node);
|
|
if (strcmp(getpropstring(node,"device_type"),"display") == 0) {
|
|
/* frame buffer output */
|
|
outSink = PROMDEV_SCREEN;
|
|
fbnode = node;
|
|
} else if (strcmp(getpropstring(node,"device_type"), "serial")
|
|
!= 0) {
|
|
/* not screen, not serial. Whatzit? */
|
|
outSink = -1;
|
|
} else { /* serial console. which? */
|
|
/*
|
|
* At this point we assume the device path is in the
|
|
* form:
|
|
* ....device@x,y:a for ttya, etc.
|
|
* If it isn't, we defer to the ROM
|
|
*/
|
|
if(OF_instance_to_path(stdout, buffer, sizeof(buffer)) <= 0) {
|
|
printf("consinit: bogus stdin path.\n");
|
|
goto setup_output;
|
|
}
|
|
cp = buffer;
|
|
while (*cp)
|
|
cp++;
|
|
cp -= 2;
|
|
#ifdef DEBUG
|
|
if (cp < buffer)
|
|
panic("consinit: bad stdout path %s",buffer);
|
|
#endif
|
|
/* XXX: only allows tty's a->z, assumes PROMDEV_TTYx contig */
|
|
if (cp[0]==':' && cp[1] >= 'a' && cp[1] <= 'z')
|
|
outSink = PROMDEV_TTYA + (cp[1] - 'a');
|
|
else outSink = -1;
|
|
}
|
|
#if 0
|
|
setup_console:
|
|
#endif
|
|
|
|
if (inSource != outSink) {
|
|
printf("cninit: mismatched PROM output selector\n");
|
|
}
|
|
|
|
switch (inSource) {
|
|
default:
|
|
printf("cninit: invalid inSource=%d\n", inSource);
|
|
callrom();
|
|
inSource = PROMDEV_KBD;
|
|
/* fall through */
|
|
|
|
case 0: /* keyboard/display */
|
|
#if NKBD > 0
|
|
zs_unit = 1; /* XXX - config info! */
|
|
channel = 0;
|
|
cn = &consdev_kd;
|
|
/* Set cn_dev, cn_pri in kd.c */
|
|
break;
|
|
#else /* NKBD */
|
|
printf("cninit: kdb/display not configured\n");
|
|
callrom();
|
|
inSource = PROMDEV_TTYA;
|
|
/* fall through */
|
|
#endif /* NKBD */
|
|
|
|
case PROMDEV_TTYA:
|
|
case PROMDEV_TTYB:
|
|
zstty_unit = inSource - PROMDEV_TTYA;
|
|
zs_unit = 0; /* XXX - config info! */
|
|
channel = zstty_unit & 1;
|
|
cn = &consdev_tty;
|
|
cn->cn_dev = makedev(zs_major, zstty_unit);
|
|
cn->cn_pri = CN_REMOTE;
|
|
break;
|
|
|
|
}
|
|
/* Now that inSource has been validated, print it. */
|
|
printf("console is %s\n", prom_inSrc_name[inSource]);
|
|
|
|
zc = zs_get_chan_addr(zs_unit, channel);
|
|
if (zc == NULL) {
|
|
printf("cninit: zs not mapped.\n");
|
|
return;
|
|
}
|
|
zs_conschan = zc;
|
|
zs_hwflags[zs_unit][channel] = ZS_HWFLAG_CONSOLE;
|
|
cn_tab = cn;
|
|
(*cn->cn_init)(cn);
|
|
#ifdef KGDB
|
|
zs_kgdb_init();
|
|
#endif
|
|
}
|