NetBSD/sys/dev/i2c/i2c_bitbang.c

179 lines
4.6 KiB
C

/* $NetBSD: i2c_bitbang.c,v 1.3 2006/03/05 17:33:33 christos Exp $ */
/*
* Copyright (c) 2003 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Common module for bit-bang'ing an I2C bus.
*/
#include <sys/param.h>
#include <dev/i2c/i2cvar.h>
#include <dev/i2c/i2c_bitbang.h>
#define SETBITS(x) ops->ibo_set_bits(v, (x))
#define DIR(x) ops->ibo_set_dir(v, (x))
#define READ ops->ibo_read_bits(v)
#define SDA ops->ibo_bits[I2C_BIT_SDA] /* i2c signal */
#define SCL ops->ibo_bits[I2C_BIT_SCL] /* i2c signal */
#define OUTPUT ops->ibo_bits[I2C_BIT_OUTPUT] /* SDA is output */
#define INPUT ops->ibo_bits[I2C_BIT_INPUT] /* SDA is input */
/*ARGSUSED*/
int
i2c_bitbang_send_start(void *v, int flags, i2c_bitbang_ops_t ops)
{
DIR(OUTPUT);
SETBITS(SDA | SCL);
delay(5); /* bus free time (4.7 uS) */
SETBITS( SCL);
delay(4); /* start hold time (4.0 uS) */
SETBITS( 0);
delay(5); /* clock low time (4.7 uS) */
return (0);
}
/*ARGSUSED*/
int
i2c_bitbang_send_stop(void *v, int flags, i2c_bitbang_ops_t ops)
{
DIR(OUTPUT);
SETBITS( SCL);
delay(4); /* stop setup time (4.0 uS) */
SETBITS(SDA | SCL);
return (0);
}
int
i2c_bitbang_initiate_xfer(void *v, i2c_addr_t addr, int flags,
i2c_bitbang_ops_t ops)
{
int i2caddr;
/* XXX Only support 7-bit addressing for now. */
if ((addr & 0x78) == 0x78)
return (EINVAL);
i2caddr = (addr << 1) | ((flags & I2C_F_READ) ? 1 : 0);
(void) i2c_bitbang_send_start(v, flags, ops);
return (i2c_bitbang_write_byte(v, i2caddr, flags & ~I2C_F_STOP, ops));
}
int
i2c_bitbang_read_byte(void *v, uint8_t *valp, int flags,
i2c_bitbang_ops_t ops)
{
int i;
uint8_t val = 0;
uint32_t bit;
DIR(INPUT);
SETBITS(SDA );
for (i = 0; i < 8; i++) {
val <<= 1;
SETBITS(SDA | SCL);
delay(4); /* clock high time (4.0 uS) */
if (READ & SDA)
val |= 1;
SETBITS(SDA );
delay(5); /* clock low time (4.7 uS) */
}
bit = (flags & I2C_F_LAST) ? SDA : 0;
DIR(OUTPUT);
SETBITS(bit );
delay(1); /* data setup time (250 nS) */
SETBITS(bit | SCL);
delay(4); /* clock high time (4.0 uS) */
SETBITS(bit );
delay(5); /* clock low time (4.7 uS) */
DIR(INPUT);
SETBITS(SDA );
delay(5);
if ((flags & (I2C_F_STOP | I2C_F_LAST)) == (I2C_F_STOP | I2C_F_LAST))
(void) i2c_bitbang_send_stop(v, flags, ops);
*valp = val;
return (0);
}
int
i2c_bitbang_write_byte(void *v, uint8_t val, int flags,
i2c_bitbang_ops_t ops)
{
uint32_t bit;
uint8_t mask;
int error;
DIR(OUTPUT);
for (mask = 0x80; mask != 0; mask >>= 1) {
bit = (val & mask) ? SDA : 0;
SETBITS(bit );
delay(1); /* data setup time (250 nS) */
SETBITS(bit | SCL);
delay(4); /* clock high time (4.0 uS) */
SETBITS(bit );
delay(5); /* clock low time (4.7 uS) */
}
DIR(INPUT);
SETBITS(SDA );
delay(5);
SETBITS(SDA | SCL);
delay(4);
error = (READ & SDA) ? EIO : 0;
SETBITS(SDA );
delay(5);
if (flags & I2C_F_STOP)
(void) i2c_bitbang_send_stop(v, flags, ops);
return (error);
}