NetBSD/share/zoneinfo/zic.8
1993-08-01 07:32:48 +00:00

426 lines
10 KiB
Groff

.\" Copyright (c) 1991 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" Arthur David Olson of the National Cancer Institute.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" from: @(#)zic.8 5.2 (Berkeley) 4/20/91
.\" $Id: zic.8,v 1.2 1993/08/01 07:34:26 mycroft Exp $
.\"
.TH ZIC 8
.SH NAME
zic \- time zone compiler
.SH SYNOPSIS
.B zic
[
.B \-v
] [
.B \-d
.I directory
] [
.B \-l
.I localtime
] [
.B \-p
.I posixrules
] [
.B \-L
.I leapsecondfilename
] [
.B \-s
] [
.I filename
\&... ]
.SH DESCRIPTION
.if t .ds lq ``
.if t .ds rq ''
.if n .ds lq \&"\"
.if n .ds rq \&"\"
.de q
\\$3\*(lq\\$1\*(rq\\$2
..
.I Zic
reads text from the file(s) named on the command line
and creates the time conversion information files specified in this input.
If a
.I filename
is
.BR \- ,
the standard input is read.
.PP
These options are available:
.TP
.BI "\-d " directory
Create time conversion information files in the named directory rather than
in the standard directory named below.
.TP
.BI "\-l " timezone
Use the given time zone as local time.
.I Zic
will act as if the input contained a link line of the form
.sp
.ti +.5i
Link \fItimezone\fP localtime
.TP
.BI "\-p " timezone
Use the given time zone's rules when handling POSIX-format
time zone environment variables.
.I Zic
will act as if the input contained a link line of the form
.sp
.ti +.5i
Link \fItimezone\fP posixrules
.TP
.BI "\-L " leapsecondfilename
Read leap second information from the file with the given name.
If this option is not used,
no leap second information appears in output files.
.TP
.B \-v
Complain if a year that appears in a data file is outside the range
of years representable by
.IR time (2)
values.
.TP
.B \-s
Limit time values stored in output files to values that are the same
whether they're taken to be signed or unsigned.
You can use this option to generate SVVS-compatible files.
.sp
Input lines are made up of fields.
Fields are separated from one another by any number of white space characters.
Leading and trailing white space on input lines is ignored.
An unquoted sharp character (#) in the input introduces a comment which extends
to the end of the line the sharp character appears on.
White space characters and sharp characters may be enclosed in double quotes
(") if they're to be used as part of a field.
Any line that is blank (after comment stripping) is ignored.
Non-blank lines are expected to be of one of three types:
rule lines, zone lines, and link lines.
.PP
A rule line has the form
.nf
.B
.ti +.5i
.ta \w'Rule\0\0'u +\w'NAME\0\0'u +\w'FROM\0\0'u +\w'1973\0\0'u +\w'TYPE\0\0'u +\w'Apr\0\0'u +\w'lastSun\0\0'u +\w'2:00\0\0'u +\w'SAVE\0\0'u
.sp
Rule NAME FROM TO TYPE IN ON AT SAVE LETTER/S
.sp
For example:
.ti +.5i
.sp
Rule USA 1969 1973 \- Apr lastSun 2:00 1:00 D
.sp
.fi
The fields that make up a rule line are:
.TP "\w'LETTER/S'u"
.B NAME
Gives the (arbitrary) name of the set of rules this rule is part of.
.TP
.B FROM
Gives the first year in which the rule applies.
The word
.B minimum
(or an abbreviation) means the minimum year with a representable time value.
The word
.B maximum
(or an abbreviation) means the maximum year with a representable time value.
.TP
.B TO
Gives the final year in which the rule applies.
In addition to
.B minimum
and
.B maximum
(as above),
the word
.B only
(or an abbreviation)
may be used to repeat the value of the
.B FROM
field.
.TP
.B TYPE
Gives the type of year in which the rule applies.
If
.B TYPE
is
.B \-
then the rule applies in all years between
.B FROM
and
.B TO
inclusive;
if
.B TYPE
is
.BR uspres ,
the rule applies in U.S. Presidential election years;
if
.B TYPE
is
.BR nonpres ,
the rule applies in years other than U.S. Presidential election years.
If
.B TYPE
is something else, then
.I zic
executes the command
.ti +.5i
\fByearistype\fP \fIyear\fP \fItype\fP
.br
to check the type of a year:
an exit status of zero is taken to mean that the year is of the given type;
an exit status of one is taken to mean that the year is not of the given type.
.TP
.B IN
Names the month in which the rule takes effect.
Month names may be abbreviated.
.TP
.B ON
Gives the day on which the rule takes effect.
Recognized forms include:
.nf
.in +.5i
.sp
.ta \w'Sun<=25\0\0'u
5 the fifth of the month
lastSun the last Sunday in the month
lastMon the last Monday in the month
Sun>=8 first Sunday on or after the eighth
Sun<=25 last Sunday on or before the 25th
.fi
.in -.5i
.sp
Names of days of the week may be abbreviated or spelled out in full.
Note that there must be no spaces within the
.B ON
field.
.TP
.B AT
Gives the time of day at which the rule takes effect.
Recognized forms include:
.nf
.in +.5i
.sp
.ta \w'1:28:13\0\0'u
2 time in hours
2:00 time in hours and minutes
15:00 24-hour format time (for times after noon)
1:28:14 time in hours, minutes, and seconds
.fi
.in -.5i
.sp
Any of these forms may be followed by the letter
.B w
if the given time is local
.q "wall clock"
time or
.B s
if the given time is local
.q standard
time; in the absence of
.B w
or
.BR s ,
wall clock time is assumed.
.TP
.B SAVE
Gives the amount of time to be added to local standard time when the rule is in
effect.
This field has the same format as the
.B AT
field
(although, of course, the
.B w
and
.B s
suffixes are not used).
.TP
.B LETTER/S
Gives the
.q "variable part"
(for example, the
.q S
or
.q D
in
.q EST
or
.q EDT )
of time zone abbreviations to be used when this rule is in effect.
If this field is
.BR \- ,
the variable part is null.
.PP
A zone line has the form
.sp
.nf
.ti +.5i
.ta \w'Zone\0\0'u +\w'Australia/South\-west\0\0'u +\w'GMTOFF\0\0'u +\w'RULES/SAVE\0\0'u +\w'FORMAT\0\0'u
Zone NAME GMTOFF RULES/SAVE FORMAT [UNTIL]
.sp
For example:
.sp
.ti +.5i
Zone Australia/South\-west 9:30 Aus CST 1987 Mar 15 2:00
.sp
.fi
The fields that make up a zone line are:
.TP "\w'GMTOFF'u"
.B NAME
The name of the time zone.
This is the name used in creating the time conversion information file for the
zone.
.TP
.B GMTOFF
The amount of time to add to GMT to get standard time in this zone.
This field has the same format as the
.B AT
and
.B SAVE
fields of rule lines;
begin the field with a minus sign if time must be subtracted from GMT.
.TP
.B RULES/SAVE
The name of the rule(s) that apply in the time zone or,
alternately, an amount of time to add to local standard time.
If this field is
.B \-
then standard time always applies in the time zone.
.TP
.B FORMAT
The format for time zone abbreviations in this time zone.
The pair of characters
.B %s
is used to show where the
.q "variable part"
of the time zone abbreviation goes.
.TP
.B UNTIL
The time at which the GMT offset or the rule(s) change for a location.
It is specified as a year, a month, a day, and a time of day.
If this is specified,
the time zone information is generated from the given GMT offset
and rule change until the time specified.
.IP
The next line must be a
.q continuation
line; this has the same form as a zone line except that the
string
.q Zone
and the name are omitted, as the continuation line will
place information starting at the time specified as the
.B UNTIL
field in the previous line in the file used by the previous line.
Continuation lines may contain an
.B UNTIL
field, just as zone lines do, indicating that the next line is a further
continuation.
.PP
A link line has the form
.sp
.nf
.ti +.5i
.if t .ta \w'Link\0\0'u +\w'LINK-FROM\0\0'u
.if n .ta \w'Link\0\0'u +\w'US/Eastern\0\0'u
Link LINK-FROM LINK-TO
.sp
For example:
.sp
.ti +.5i
Link US/Eastern EST5EDT
.sp
.fi
The
.B LINK-FROM
field should appear as the
.B NAME
field in some zone line;
the
.B LINK-TO
field is used as an alternate name for that zone.
.PP
Except for continuation lines,
lines may appear in any order in the input.
.PP
Lines in the file that describes leap seconds have the following form:
.nf
.B
.ti +.5i
.ta \w'Leap\0\0'u +\w'YEAR\0\0'u +\w'MONTH\0\0'u +\w'DAY\0\0'u +\w'HH:MM:SS\0\0'u +\w'CORR\0\0'u
Leap YEAR MONTH DAY HH:MM:SS CORR R/S
.sp
For example:
.ti +.5i
.sp
Leap 1974 Dec 31 23:59:60 + S
.sp
.fi
The
.BR YEAR ,
.BR MONTH ,
.BR DAY ,
and
.B HH:MM:SS
fields tell when the leap second happened.
The
.B CORR
field
should be
.q +
if a second was added
or
.q -
if a second was skipped.
The
.B R/S
field
should be (an abbreviation of)
.q Stationary
if the leap second time given by the other fields should be interpreted as GMT
or
(an abbreviation of)
.q Rolling
if the leap second time given by the other fields should be interpreted as
local wall clock time.
.SH NOTE
For areas with more than two types of local time,
you may need to use local standard time in the
.B AT
field of the earliest transition time's rule to ensure that
the earliest transition time recorded in the compiled file is correct.
.SH FILE
/etc/zoneinfo standard directory used for created files
.SH "SEE ALSO"
newctime(3), tzfile(5), zdump(8)
.. @(#)zic.8 4.4