232 lines
5.9 KiB
Plaintext
232 lines
5.9 KiB
Plaintext
.\" $NetBSD: hardware,v 1.11 2002/04/23 05:56:44 gmcgarry Exp $
|
|
.
|
|
.Nx*M
|
|
\*V will run on most HP 9000/300- and 400-series machines.
|
|
The smallest amount of RAM that has been tested is 4 MB. If you wish to
|
|
run X, more RAM is recommended.
|
|
.Pp
|
|
Here is a table of recommended HD partition sizes for a full install:
|
|
.Bl -column -offset indent Partition Suggested Needed
|
|
.It Partition Ta Suggested Ta Needed
|
|
.It /\ (root) Ta "25 MB" Ta "15 MB"
|
|
.It /usr Ta "150 MB" Ta "100 MB"
|
|
.It /var Ta "20 MB" Ta "5 MB"
|
|
.It swap Ta Em "2-3 *RAM" Ta 6 MB
|
|
.El
|
|
.(item -offset indent
|
|
Anything else is up to you!
|
|
.item)
|
|
.Pp
|
|
.(Note
|
|
If you're planning to do the installation using the miniroot file system
|
|
which is placed into the swap area of the disk, the swap partition must
|
|
be large enough to hold this miniroot image.
|
|
.Note)
|
|
.
|
|
.Ss2 Supported hardware
|
|
.(bullet -offset indent
|
|
CPUs
|
|
.(bullet -compact
|
|
318 (16 MHz 68020, with built-in monochrome framebuffer, no expansion)
|
|
.It
|
|
319 (16 MHz 68020, with built-in 6 bit color framebuffer, no expansion)
|
|
.It
|
|
320 (16 MHz 68020, 16 KB L2 cache, up to 7.5 MB RAM)
|
|
.br
|
|
.Em "Requires Human Interface board"
|
|
.It
|
|
330 (16 MHz 68020, 4 MB on motherboard, up to 8 MB RAM)
|
|
.br
|
|
.Em "Requires Human Interface board"
|
|
.It
|
|
340 (16 MHz 68030, up to 16 MB RAM)
|
|
.It
|
|
345 (50 MHz 68030 with 32 KB L2 cache, up to 128 MB RAM, built-in SCSI)
|
|
.It
|
|
350 (25 MHz 68020, 32 KB L2 cache, up to 48 MB RAM)
|
|
.br
|
|
.Em "Requires Human Interface board"
|
|
.It
|
|
360 (25 MHz 68030, with 4 MB RAM built-in, up to 48 MB RAM)
|
|
.br
|
|
.Em "Requires System Interface board"
|
|
.It
|
|
362 (25 MHz 68030)
|
|
.br
|
|
.Em "Requires System Interface board"
|
|
.br
|
|
.Em "Framebuffer is unsupported, you must use a serial console"
|
|
.It
|
|
370 (33 MHz 68030, 64 KB L2 cache, up to 48 MB RAM)
|
|
.br
|
|
.Em "Requires System Interface board"
|
|
.It
|
|
375 (50 MHz 68030 with 32 KB L2 cache, up to 128 MB RAM, built-in SCSI)
|
|
.It
|
|
380 (25 MHz 68040, up to 128 MB RAM, built-in SCSI)
|
|
.It
|
|
382 (25 MHz 68040, built-in SCSI)
|
|
.br
|
|
.Em "Framebuffer is unsupported, you must use a serial console"
|
|
.It
|
|
385 (33 MHz 68040, up to 128 MB RAM, built-in SCSI)
|
|
.It
|
|
400s, 400t, 400dl (50 MHz 68030 with 32 KB L2 cache, built-in SCSI,
|
|
up to 128 MB RAM)
|
|
.It
|
|
425s, 425t, 425dl (25 MHz 68040 with built-in SCSI, up to 128 MB RAM)
|
|
.It
|
|
425e (25 MHz 68040, built-in SCSI)
|
|
.br
|
|
.Em "The BootROM does not support serial console and"
|
|
.Nx*M
|
|
.Em "does not support the 425e framebuffer. When the"
|
|
.Nx
|
|
.Em "kernel begins to boot it will default to using the serial port for console"
|
|
.It
|
|
433s, 433t, 433dl (33 MHz 68040 with built-in SCSI, up to 128 MB RAM)
|
|
.bullet)
|
|
.It
|
|
HP-IB devices
|
|
.(bullet -compact
|
|
.Em rd ;
|
|
CS80 disks: 2200, 2203, 7912, 7914, 7933, 7936, 7937, 7945, 7946,
|
|
7957, 7958, and 7959
|
|
.It
|
|
.Em rd ;
|
|
CS80 floppy disks: 9122, 9134 (possibly others)
|
|
.br
|
|
.Em "Requires use of HP-UX LIF utilities via HP-UX emulation"
|
|
.It
|
|
.Em ct ;
|
|
CS80 Low-density 16 track cartridge (67 MB): 7912, 7914, 7946, and 9144
|
|
.br
|
|
.Em "Cannot read or write to 32 track tapes"
|
|
.It
|
|
.Em ct ;
|
|
CS80 High-density 32 track cartridge (134 MB): 9145
|
|
.br
|
|
.Em "Cannot write to 16 track tapes (read only)"
|
|
.It
|
|
.Em mt ;
|
|
CS80 Half-inch tape: 7974A, 7978A/B, 7979A, 7980A, and 7980XC.
|
|
.bullet)
|
|
.It
|
|
SCSI devices
|
|
.(bullet -compact
|
|
.Em sd ;
|
|
SCSI hard drives
|
|
.br
|
|
.Em "Some SCSI II drives may have problems (not very common)"
|
|
.It
|
|
.Em sd ;
|
|
SCSI CD-ROM drives
|
|
.br
|
|
.Em "Support for data only (no audio CDs)"
|
|
.It
|
|
.Em sd ;
|
|
SCSI Magneto-optical drives
|
|
.It
|
|
.Em st ;
|
|
SCSI tape drives: HP 35450A (DDS-1 DAT), Exabyte EXB-8200 (8mm), Archive
|
|
(QIC-24), Archive Viper (QIC-60), Archive Viper (QIC-150), Archive Python
|
|
25501 (DAT), and Archive Python 28849 (DAT)
|
|
.It
|
|
.Em ac ;
|
|
SCSI autochangers
|
|
.bullet)
|
|
.It
|
|
Serial interfaces (see the FAQ for more detailed specs and information on
|
|
configuring:
|
|
.Lk http://www.netbsd.org/Ports/hp300/faq.html#serialinfo
|
|
.(bullet -compact
|
|
.Em dca ;
|
|
Built-in single serial port on System Interface board and Human Interface board
|
|
.It
|
|
.Em apci ;
|
|
Built-in Apollo 4-port on Series 400 workstations
|
|
.It
|
|
.Em dcm ;
|
|
98638 8-port (DIO-II board, appears to kernel as two 98642 devices)
|
|
.It
|
|
.Em dcm ;
|
|
98642 4-port (DIO-I board)
|
|
.It
|
|
.Em dca ;
|
|
98626, 98644 built-in or add-on (DIO-I board) single serial port
|
|
.It
|
|
.Em dcl ;
|
|
98628A single port (DIO-I board)
|
|
.bullet)
|
|
.It
|
|
Network interfaces
|
|
.(bullet -compact
|
|
.Em le ;
|
|
98643 built-in and add-on (DIO-I board) ethernet cards.
|
|
.bullet)
|
|
.It
|
|
Graphics Devices
|
|
.(bullet -compact
|
|
98544 monochrome Topcat (1024x768, 1 bit, DIO-II)
|
|
.It
|
|
98545A color Topcat (1024x768, 4 bits, DIO-II)
|
|
.It
|
|
98547 color Topcat (1024x768, 6 bits)
|
|
.It
|
|
98548A monochrome Catseye (1024x768, 1 bit)
|
|
.It
|
|
98549A color Catseye (1024x768, 6 bits)
|
|
.It
|
|
98550A Catseye Hi-Res Color (a.k.a. CH) (1280x1024 @ 60 Hz, 8 bits, DIO-II)
|
|
.It
|
|
98700 and 98710 Gatorbox (1280x1024 @ 60 Hz, 4 or 8 bits)
|
|
.br
|
|
.Em "Requires 98287 (DIO-I board) to connect to workstation"
|
|
.It
|
|
98720 and 98721 color Renaissance SRX (1280x1024 @ 60 Hz, 8, 12 or 24 bits)
|
|
.br
|
|
.Em "Requires 98724 (DIO-I board) or 98725 (DIO-II board) to connect to workstation"
|
|
.It
|
|
98730 and 98731 DaVinci TurboSRX (1280x1024 @ 60 Hz, 8, 16, or 24 bits)
|
|
.br
|
|
.Em "Requires 98726A (DIO-II board) to connect to workstation"
|
|
.It
|
|
A1096A monochrome Hyperion (1280x1024, 1 bit)
|
|
.It
|
|
A1416A Kathmandu (a.k.a. Color VRX) (1280x1024 @ 60 hz, 8 bits, DIO-II)
|
|
.bullet)
|
|
.It
|
|
HP-HIL devices
|
|
.(bullet -compact
|
|
Keyboards
|
|
.It
|
|
Two and three button mice
|
|
.It
|
|
46094 Quadrature Port (supports normal serial mice)
|
|
.It
|
|
Graphics tablets
|
|
.It
|
|
Dial boxes
|
|
.It
|
|
ID modules
|
|
.bullet)
|
|
.It
|
|
Miscellaneous boards/interfaces
|
|
.(bullet -compact
|
|
98265A SCSI interface (DIO-I board, daughtercard for 98562, or built-in)
|
|
.It
|
|
98561 Human Interface board (DIO-I board with serial port, HP-HIL, and HP-IB)
|
|
.It
|
|
98562 System Interface board (DIO-II board with serial port,
|
|
HP-HIL, HP-IB, DMA, and ethernet, has optional fast HP-IB or SCSI
|
|
daughterboard)
|
|
.It
|
|
98620 DMA card (DIO-I board, for use with 98561)
|
|
.It
|
|
98624 HP-IB interface (DIO-I board or built-in)
|
|
.It
|
|
98625A and 98625B 'fast' HP-IB interface (DIO-I board or
|
|
daughtercard for 98562)
|
|
.bullet)
|
|
.bullet)
|