90 lines
2.5 KiB
Plaintext
90 lines
2.5 KiB
Plaintext
.\" $NetBSD: hardware,v 1.14 1999/04/30 18:26:58 leo Exp $
|
|
NetBSD/atari \*V runs on a TT030, Falcon and Hades. An FPU is not required.
|
|
The minimum amount of RAM required is 4Mb. On the Hades, only the Tseng PCI
|
|
VGA cards (et4000/et6000/et6100) are supported in the \*V release. When
|
|
an unsupported video card is present, you can use NetBSD with a serial console
|
|
only.
|
|
.Pp
|
|
Here is a table of recommended HD partition sizes for a full install:
|
|
.Bd -literal -offset indent
|
|
partition: advise, with X, needed, with X
|
|
root (/) 20M 20M 15M 15M
|
|
user (/usr) 95M 125M 75M 105M
|
|
swap ----- 2M for every M ram -----
|
|
local (/local) up to you
|
|
.Ed
|
|
In addition of the rule of thumb for the swap size mentioned below, you
|
|
probably want to make sure that the size of the swap partition does not
|
|
drop below 20Mb (30Mb for systems with X).
|
|
Another item are the add-on packages. You might want 20-30M (or more) in
|
|
/local (or added to /usr) to store packages from the NetBSD package system.
|
|
As you may note the recommended size of /usr is 20M greater than
|
|
needed. This is to leave room for a kernel source and compile tree
|
|
as you will probably want to compile your own kernel. (GENERIC is
|
|
large and bulky to accommodate all people, BOOT is small and might
|
|
not have all the features you want).
|
|
.Pp
|
|
Supported devices include:
|
|
.Bl -bullet
|
|
. It
|
|
The builtin SCSI host adapter
|
|
. Bl -hyphen
|
|
. It
|
|
Should support most SCSI-drives.
|
|
. It
|
|
Should support most tape drives.
|
|
. It
|
|
Should support most CD-ROM drives.
|
|
. It
|
|
Should support most ZIP/MO drives.
|
|
. El
|
|
. It
|
|
The builtin video controller
|
|
. It
|
|
The builtin (720Kb/1.44Mb) floppydrive
|
|
. It
|
|
The serial2/modem2 ports
|
|
. It
|
|
The Falcon FX memory expansion
|
|
. It
|
|
The atari mouse
|
|
. It
|
|
A 3-button mouse (see build description in the FAQ!)
|
|
. It
|
|
The parallel printer
|
|
. It
|
|
IDE interface on both Falcon and Hades (includes ATAPI support)
|
|
. It
|
|
The serial interface on the first 68901 UART (modem1)
|
|
. It
|
|
VME-bus devices (TT030/Hades)
|
|
. Bl -hyphen
|
|
. It
|
|
BVME410 ethernet
|
|
. It
|
|
Circad Leonardo 24-bit VME graphics adapter
|
|
. It
|
|
Crazy Dots VME et4000 graphics adapter
|
|
. It
|
|
Riebl (and possibly PAM) ethernet cards on the VME bus.
|
|
. El
|
|
. It
|
|
PCI-bus devices (Hades only)
|
|
. Bl -hyphen
|
|
. It
|
|
ET4000/ET6000/ET6100-PCI (VGA console)
|
|
. It
|
|
Adaptec 2940U
|
|
. El
|
|
. It
|
|
ISA-bus devices (Hades only)
|
|
. Bl -hyphen
|
|
. It
|
|
Teles S0/16.3-ISA ISDN adapter (with I4B)
|
|
. El
|
|
.El
|
|
.Pp
|
|
This list is incomplete by definition. I can not test all SCSI peripherals,
|
|
ISA cards or PCI cards... If you have problems with such a peripheral, please
|
|
contact the port-atari mailing list.
|