Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/hd64570.c

1731 lines
39 KiB
C
Raw Blame History

/* $NetBSD: hd64570.c,v 1.4 1998/12/09 23:25:41 tls Exp $ */
/*
* Copyright (c) 1998 Vixie Enterprises
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Vixie Enterprises nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND
* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This software has been written for Vixie Enterprises by Michael Graff
* <explorer@flame.org>. To learn more about Vixie Enterprises, see
* ``http://www.vix.com''.
*/
/*
* TODO:
*
* o teach the receive logic about errors, and about long frames that
* span more than one input buffer. (Right now, receive/transmit is
* limited to one descriptor's buffer space, which is MTU + 4 bytes.
* This is currently 1504, which is large enough to hold the HDLC
* header and the packet itself. Packets which are too long are
* silently dropped on transmit and silently dropped on receive.
* o write code to handle the msci interrupts, needed only for CD
* and CTS changes.
* o consider switching back to a "queue tx with DMA active" model which
* should help sustain outgoing traffic
* o through clever use of bus_dma*() functions, it should be possible
* to map the mbuf's data area directly into a descriptor transmit
* buffer, removing the need to allocate extra memory. If, however,
* we run out of descriptors for this, we will need to then allocate
* one large mbuf, copy the fragmented chain into it, and put it onto
* a single descriptor.
* o use bus_dmamap_sync() with the right offset and lengths, rather
* than cheating and always sync'ing the whole region.
*/
#include "bpfilter.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/kernel.h>
#include <net/if.h>
#include <net/if_types.h>
#include <net/netisr.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/hd64570reg.h>
#include <dev/ic/hd64570var.h>
#define SCA_DEBUG_RX 0x0001
#define SCA_DEBUG_TX 0x0002
#define SCA_DEBUG_CISCO 0x0004
#define SCA_DEBUG_DMA 0x0008
#define SCA_DEBUG_RXPKT 0x0010
#define SCA_DEBUG_TXPKT 0x0020
#define SCA_DEBUG_INTR 0x0040
#if 0
#define SCA_DEBUG_LEVEL ( SCA_DEBUG_TX )
#else
#define SCA_DEBUG_LEVEL 0
#endif
u_int32_t sca_debug = SCA_DEBUG_LEVEL;
#if SCA_DEBUG_LEVEL > 0
#define SCA_DPRINTF(l, x) do { \
if ((l) & sca_debug) \
printf x;\
} while (0)
#else
#define SCA_DPRINTF(l, x)
#endif
#define SCA_MTU 1500 /* hard coded */
/*
* buffers per tx and rx channels, per port, and the size of each.
* Don't use these constants directly, as they are really only hints.
* Use the calculated values stored in struct sca_softc instead.
*
* Each must be at least 2, receive would be better at around 20 or so.
*
* XXX Due to a damned near impossible to track down bug, transmit buffers
* MUST be 2, no more, no less.
*/
#ifndef SCA_NtxBUFS
#define SCA_NtxBUFS 2
#endif
#ifndef SCA_NrxBUFS
#define SCA_NrxBUFS 20
#endif
#ifndef SCA_BSIZE
#define SCA_BSIZE (SCA_MTU + 4) /* room for HDLC as well */
#endif
#if 0
#define SCA_USE_FASTQ /* use a split queue, one for fast traffic */
#endif
static inline void sca_write_1(struct sca_softc *, u_int, u_int8_t);
static inline void sca_write_2(struct sca_softc *, u_int, u_int16_t);
static inline u_int8_t sca_read_1(struct sca_softc *, u_int);
static inline u_int16_t sca_read_2(struct sca_softc *, u_int);
static inline void msci_write_1(sca_port_t *, u_int, u_int8_t);
static inline u_int8_t msci_read_1(sca_port_t *, u_int);
static inline void dmac_write_1(sca_port_t *, u_int, u_int8_t);
static inline void dmac_write_2(sca_port_t *, u_int, u_int16_t);
static inline u_int8_t dmac_read_1(sca_port_t *, u_int);
static inline u_int16_t dmac_read_2(sca_port_t *, u_int);
static int sca_alloc_dma(struct sca_softc *);
static void sca_setup_dma_memory(struct sca_softc *);
static void sca_msci_init(struct sca_softc *, sca_port_t *);
static void sca_dmac_init(struct sca_softc *, sca_port_t *);
static void sca_dmac_rxinit(sca_port_t *);
static int sca_dmac_intr(sca_port_t *, u_int8_t);
static int sca_msci_intr(struct sca_softc *, u_int8_t);
static void sca_get_packets(sca_port_t *);
static void sca_frame_process(sca_port_t *, sca_desc_t *, u_int8_t *);
static int sca_frame_avail(sca_port_t *, int *);
static void sca_frame_skip(sca_port_t *, int);
static void sca_port_starttx(sca_port_t *);
static void sca_port_up(sca_port_t *);
static void sca_port_down(sca_port_t *);
static int sca_output __P((struct ifnet *, struct mbuf *, struct sockaddr *,
struct rtentry *));
static int sca_ioctl __P((struct ifnet *, u_long, caddr_t));
static void sca_start __P((struct ifnet *));
static void sca_watchdog __P((struct ifnet *));
static struct mbuf *sca_mbuf_alloc(caddr_t, u_int);
#if SCA_DEBUG_LEVEL > 0
static void sca_frame_print(sca_port_t *, sca_desc_t *, u_int8_t *);
#endif
static inline void
sca_write_1(struct sca_softc *sc, u_int reg, u_int8_t val)
{
bus_space_write_1(sc->sc_iot, sc->sc_ioh, SCADDR(reg), val);
}
static inline void
sca_write_2(struct sca_softc *sc, u_int reg, u_int16_t val)
{
bus_space_write_2(sc->sc_iot, sc->sc_ioh, SCADDR(reg), val);
}
static inline u_int8_t
sca_read_1(struct sca_softc *sc, u_int reg)
{
return bus_space_read_1(sc->sc_iot, sc->sc_ioh, SCADDR(reg));
}
static inline u_int16_t
sca_read_2(struct sca_softc *sc, u_int reg)
{
return bus_space_read_2(sc->sc_iot, sc->sc_ioh, SCADDR(reg));
}
static inline void
msci_write_1(sca_port_t *scp, u_int reg, u_int8_t val)
{
sca_write_1(scp->sca, scp->msci_off + reg, val);
}
static inline u_int8_t
msci_read_1(sca_port_t *scp, u_int reg)
{
return sca_read_1(scp->sca, scp->msci_off + reg);
}
static inline void
dmac_write_1(sca_port_t *scp, u_int reg, u_int8_t val)
{
sca_write_1(scp->sca, scp->dmac_off + reg, val);
}
static inline void
dmac_write_2(sca_port_t *scp, u_int reg, u_int16_t val)
{
sca_write_2(scp->sca, scp->dmac_off + reg, val);
}
static inline u_int8_t
dmac_read_1(sca_port_t *scp, u_int reg)
{
return sca_read_1(scp->sca, scp->dmac_off + reg);
}
static inline u_int16_t
dmac_read_2(sca_port_t *scp, u_int reg)
{
return sca_read_2(scp->sca, scp->dmac_off + reg);
}
int
sca_init(struct sca_softc *sc, u_int nports)
{
/*
* Do a little sanity check: check number of ports.
*/
if (nports < 1 || nports > 2)
return 1;
/*
* remember the details
*/
sc->sc_numports = nports;
/*
* allocate the memory and chop it into bits.
*/
if (sca_alloc_dma(sc) != 0)
return 1;
sca_setup_dma_memory(sc);
/*
* disable DMA and MSCI interrupts
*/
sca_write_1(sc, SCA_DMER, 0);
sca_write_1(sc, SCA_IER0, 0);
sca_write_1(sc, SCA_IER1, 0);
sca_write_1(sc, SCA_IER2, 0);
/*
* configure interrupt system
*/
sca_write_1(sc, SCA_ITCR, 0); /* use ivr, no int ack */
sca_write_1(sc, SCA_IVR, 0x40);
sca_write_1(sc, SCA_IMVR, 0x40);
/*
* set wait control register to zero wait states
*/
sca_write_1(sc, SCA_PABR0, 0);
sca_write_1(sc, SCA_PABR1, 0);
sca_write_1(sc, SCA_WCRL, 0);
sca_write_1(sc, SCA_WCRM, 0);
sca_write_1(sc, SCA_WCRH, 0);
/*
* disable DMA and reset status
*/
sca_write_1(sc, SCA_PCR, SCA_PCR_PR2);
/*
* disable transmit DMA for all channels
*/
sca_write_1(sc, SCA_DSR0 + SCA_DMAC_OFF_0, 0);
sca_write_1(sc, SCA_DCR0 + SCA_DMAC_OFF_0, SCA_DCR_ABRT);
sca_write_1(sc, SCA_DSR1 + SCA_DMAC_OFF_0, 0);
sca_write_1(sc, SCA_DCR1 + SCA_DMAC_OFF_0, SCA_DCR_ABRT);
sca_write_1(sc, SCA_DSR0 + SCA_DMAC_OFF_1, 0);
sca_write_1(sc, SCA_DCR0 + SCA_DMAC_OFF_1, SCA_DCR_ABRT);
sca_write_1(sc, SCA_DSR1 + SCA_DMAC_OFF_1, 0);
sca_write_1(sc, SCA_DCR1 + SCA_DMAC_OFF_1, SCA_DCR_ABRT);
/*
* enable DMA based on channel enable flags for each channel
*/
sca_write_1(sc, SCA_DMER, SCA_DMER_EN);
/*
* Should check to see if the chip is responding, but for now
* assume it is.
*/
return 0;
}
/*
* initialize the port and attach it to the networking layer
*/
void
sca_port_attach(struct sca_softc *sc, u_int port)
{
sca_port_t *scp = &sc->sc_ports[port];
struct ifnet *ifp;
static u_int ntwo_unit = 0;
scp->sca = sc; /* point back to the parent */
scp->sp_port = port;
if (port == 0) {
scp->msci_off = SCA_MSCI_OFF_0;
scp->dmac_off = SCA_DMAC_OFF_0;
if(sc->parent != NULL)
ntwo_unit=sc->parent->dv_unit * 2 + 0;
else
ntwo_unit = 0; /* XXX */
} else {
scp->msci_off = SCA_MSCI_OFF_1;
scp->dmac_off = SCA_DMAC_OFF_1;
if(sc->parent != NULL)
ntwo_unit=sc->parent->dv_unit * 2 + 1;
else
ntwo_unit = 1; /* XXX */
}
sca_msci_init(sc, scp);
sca_dmac_init(sc, scp);
/*
* attach to the network layer
*/
ifp = &scp->sp_if;
sprintf(ifp->if_xname, "ntwo%d", ntwo_unit);
ifp->if_softc = scp;
ifp->if_mtu = SCA_MTU;
ifp->if_flags = IFF_POINTOPOINT | IFF_MULTICAST;
ifp->if_type = IFT_OTHER; /* Should be HDLC, but... */
ifp->if_hdrlen = HDLC_HDRLEN;
ifp->if_ioctl = sca_ioctl;
ifp->if_output = sca_output;
ifp->if_watchdog = sca_watchdog;
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
scp->linkq.ifq_maxlen = 5; /* if we exceed this we are hosed already */
#ifdef SCA_USE_FASTQ
scp->fastq.ifq_maxlen = IFQ_MAXLEN;
#endif
if_attach(ifp);
#if NBPFILTER > 0
bpfattach(&scp->sp_bpf, ifp, DLT_HDLC, HDLC_HDRLEN);
#endif
if (sc->parent == NULL)
printf("%s: port %d\n", ifp->if_xname, port);
else
printf("%s at %s port %d\n",
ifp->if_xname, sc->parent->dv_xname, port);
/*
* reset the last seen times on the cisco keepalive protocol
*/
scp->cka_lasttx = time.tv_usec;
scp->cka_lastrx = 0;
}
/*
* initialize the port's MSCI
*/
static void
sca_msci_init(struct sca_softc *sc, sca_port_t *scp)
{
msci_write_1(scp, SCA_CMD0, SCA_CMD_RESET);
msci_write_1(scp, SCA_MD00,
( SCA_MD0_CRC_1
| SCA_MD0_CRC_CCITT
| SCA_MD0_CRC_ENABLE
| SCA_MD0_MODE_HDLC));
msci_write_1(scp, SCA_MD10, SCA_MD1_NOADDRCHK);
msci_write_1(scp, SCA_MD20,
(SCA_MD2_DUPLEX | SCA_MD2_NRZ));
/*
* reset the port (and lower RTS)
*/
msci_write_1(scp, SCA_CMD0, SCA_CMD_RXRESET);
msci_write_1(scp, SCA_CTL0,
(SCA_CTL_IDLPAT | SCA_CTL_UDRNC | SCA_CTL_RTS));
msci_write_1(scp, SCA_CMD0, SCA_CMD_TXRESET);
/*
* select the RX clock as the TX clock, and set for external
* clock source.
*/
msci_write_1(scp, SCA_RXS0, 0);
msci_write_1(scp, SCA_TXS0, 0);
/*
* XXX don't pay attention to CTS or CD changes right now. I can't
* simulate one, and the transmitter will try to transmit even if
* CD isn't there anyway, so nothing bad SHOULD happen.
*/
msci_write_1(scp, SCA_IE00, 0);
msci_write_1(scp, SCA_IE10, 0); /* 0x0c == CD and CTS changes only */
msci_write_1(scp, SCA_IE20, 0);
msci_write_1(scp, SCA_FIE0, 0);
msci_write_1(scp, SCA_SA00, 0);
msci_write_1(scp, SCA_SA10, 0);
msci_write_1(scp, SCA_IDL0, 0x7e);
msci_write_1(scp, SCA_RRC0, 0x0e);
msci_write_1(scp, SCA_TRC00, 0x10);
msci_write_1(scp, SCA_TRC10, 0x1f);
}
/*
* Take the memory for the port and construct two circular linked lists of
* descriptors (one tx, one rx) and set the pointers in these descriptors
* to point to the buffer space for this port.
*/
static void
sca_dmac_init(struct sca_softc *sc, sca_port_t *scp)
{
sca_desc_t *desc;
u_int32_t desc_p;
u_int32_t buf_p;
int i;
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam,
0, sc->sc_allocsize, BUS_DMASYNC_PREWRITE);
desc = scp->txdesc;
desc_p = scp->txdesc_p;
buf_p = scp->txbuf_p;
scp->txcur = 0;
scp->txinuse = 0;
for (i = 0 ; i < SCA_NtxBUFS ; i++) {
/*
* desc_p points to the physcial address of the NEXT desc
*/
desc_p += sizeof(sca_desc_t);
desc->cp = desc_p & 0x0000ffff;
desc->bp = buf_p & 0x0000ffff;
desc->bpb = (buf_p & 0x00ff0000) >> 16;
desc->len = SCA_BSIZE;
desc->stat = 0;
desc++; /* point to the next descriptor */
buf_p += SCA_BSIZE;
}
/*
* "heal" the circular list by making the last entry point to the
* first.
*/
desc--;
desc->cp = scp->txdesc_p & 0x0000ffff;
/*
* Now, initialize the transmit DMA logic
*
* CPB == chain pointer base address
*/
dmac_write_1(scp, SCA_DSR1, 0);
dmac_write_1(scp, SCA_DCR1, SCA_DCR_ABRT);
dmac_write_1(scp, SCA_DMR1, SCA_DMR_TMOD | SCA_DMR_NF);
dmac_write_1(scp, SCA_DIR1,
(SCA_DIR_EOT | SCA_DIR_BOF | SCA_DIR_COF));
dmac_write_1(scp, SCA_CPB1,
(u_int8_t)((scp->txdesc_p & 0x00ff0000) >> 16));
/*
* now, do the same thing for receive descriptors
*/
desc = scp->rxdesc;
desc_p = scp->rxdesc_p;
buf_p = scp->rxbuf_p;
scp->rxstart = 0;
scp->rxend = SCA_NrxBUFS - 1;
for (i = 0 ; i < SCA_NrxBUFS ; i++) {
/*
* desc_p points to the physcial address of the NEXT desc
*/
desc_p += sizeof(sca_desc_t);
desc->cp = desc_p & 0x0000ffff;
desc->bp = buf_p & 0x0000ffff;
desc->bpb = (buf_p & 0x00ff0000) >> 16;
desc->len = SCA_BSIZE;
desc->stat = 0x00;
desc++; /* point to the next descriptor */
buf_p += SCA_BSIZE;
}
/*
* "heal" the circular list by making the last entry point to the
* first.
*/
desc--;
desc->cp = scp->rxdesc_p & 0x0000ffff;
sca_dmac_rxinit(scp);
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam,
0, sc->sc_allocsize, BUS_DMASYNC_POSTWRITE);
}
/*
* reset and reinitialize the receive DMA logic
*/
static void
sca_dmac_rxinit(sca_port_t *scp)
{
/*
* ... and the receive DMA logic ...
*/
dmac_write_1(scp, SCA_DSR0, 0); /* disable DMA */
dmac_write_1(scp, SCA_DCR0, SCA_DCR_ABRT);
dmac_write_1(scp, SCA_DMR0, SCA_DMR_TMOD | SCA_DMR_NF);
dmac_write_2(scp, SCA_BFLL0, SCA_BSIZE);
/*
* CPB == chain pointer base
* CDA == current descriptor address
* EDA == error descriptor address (overwrite position)
*/
dmac_write_1(scp, SCA_CPB0,
(u_int8_t)((scp->rxdesc_p & 0x00ff0000) >> 16));
dmac_write_2(scp, SCA_CDAL0,
(u_int16_t)(scp->rxdesc_p & 0xffff));
dmac_write_2(scp, SCA_EDAL0,
(u_int16_t)(scp->rxdesc_p
+ sizeof(sca_desc_t) * SCA_NrxBUFS));
/*
* enable receiver DMA
*/
dmac_write_1(scp, SCA_DIR0,
(SCA_DIR_EOT | SCA_DIR_EOM | SCA_DIR_BOF | SCA_DIR_COF));
dmac_write_1(scp, SCA_DSR0, SCA_DSR_DE);
}
static int
sca_alloc_dma(struct sca_softc *sc)
{
u_int allocsize;
int err;
int rsegs;
u_int bpp;
SCA_DPRINTF(SCA_DEBUG_DMA,
("sizeof sca_desc_t: %d bytes\n", sizeof (sca_desc_t)));
bpp = sc->sc_numports * (SCA_NtxBUFS + SCA_NrxBUFS);
allocsize = bpp * (SCA_BSIZE + sizeof (sca_desc_t));
/*
* sanity checks:
*
* Check the total size of the data buffers, and so on. The total
* DMAable space needs to fit within a single 16M region, and the
* descriptors need to fit within a 64K region.
*/
if (allocsize > 16 * 1024 * 1024)
return 1;
if (bpp * sizeof (sca_desc_t) > 64 * 1024)
return 1;
sc->sc_allocsize = allocsize;
/*
* Allocate one huge chunk of memory.
*/
if (bus_dmamem_alloc(sc->sc_dmat,
allocsize,
SCA_DMA_ALIGNMENT,
SCA_DMA_BOUNDRY,
&sc->sc_seg, 1, &rsegs, BUS_DMA_NOWAIT) != 0) {
printf("Could not allocate DMA memory\n");
return 1;
}
SCA_DPRINTF(SCA_DEBUG_DMA,
("DMA memory allocated: %d bytes\n", allocsize));
if (bus_dmamem_map(sc->sc_dmat, &sc->sc_seg, 1, allocsize,
&sc->sc_dma_addr, BUS_DMA_NOWAIT) != 0) {
printf("Could not map DMA memory into kernel space\n");
return 1;
}
SCA_DPRINTF(SCA_DEBUG_DMA, ("DMA memory mapped\n"));
if (bus_dmamap_create(sc->sc_dmat, allocsize, 2,
allocsize, SCA_DMA_BOUNDRY,
BUS_DMA_NOWAIT, &sc->sc_dmam) != 0) {
printf("Could not create DMA map\n");
return 1;
}
SCA_DPRINTF(SCA_DEBUG_DMA, ("DMA map created\n"));
err = bus_dmamap_load(sc->sc_dmat, sc->sc_dmam, sc->sc_dma_addr,
allocsize, NULL, BUS_DMA_NOWAIT);
if (err != 0) {
printf("Could not load DMA segment: %d\n", err);
return 1;
}
SCA_DPRINTF(SCA_DEBUG_DMA, ("DMA map loaded\n"));
return 0;
}
/*
* Take the memory allocated with sca_alloc_dma() and divide it among the
* two ports.
*/
static void
sca_setup_dma_memory(struct sca_softc *sc)
{
sca_port_t *scp0, *scp1;
u_int8_t *vaddr0;
u_int32_t paddr0;
u_long addroff;
/*
* remember the physical address to 24 bits only, since the upper
* 8 bits is programed into the device at a different layer.
*/
paddr0 = (sc->sc_dmam->dm_segs[0].ds_addr & 0x00ffffff);
vaddr0 = sc->sc_dma_addr;
/*
* if we have only one port it gets the full range. If we have
* two we need to do a little magic to divide things up.
*
* The descriptors will all end up in the front of the area, while
* the remainder of the buffer is used for transmit and receive
* data.
*
* -------------------- start of memory
* tx desc port 0
* rx desc port 0
* tx desc port 1
* rx desc port 1
* tx buffer port 0
* rx buffer port 0
* tx buffer port 1
* rx buffer port 1
* -------------------- end of memory
*/
scp0 = &sc->sc_ports[0];
scp1 = &sc->sc_ports[1];
scp0->txdesc_p = paddr0;
scp0->txdesc = (sca_desc_t *)vaddr0;
addroff = sizeof(sca_desc_t) * SCA_NtxBUFS;
/*
* point to the range following the tx descriptors, and
* set the rx descriptors there.
*/
scp0->rxdesc_p = paddr0 + addroff;
scp0->rxdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * SCA_NrxBUFS;
if (sc->sc_numports == 2) {
scp1->txdesc_p = paddr0 + addroff;
scp1->txdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * SCA_NtxBUFS;
scp1->rxdesc_p = paddr0 + addroff;
scp1->rxdesc = (sca_desc_t *)(vaddr0 + addroff);
addroff += sizeof(sca_desc_t) * SCA_NrxBUFS;
}
/*
* point to the memory following the descriptors, and set the
* transmit buffer there.
*/
scp0->txbuf_p = paddr0 + addroff;
scp0->txbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * SCA_NtxBUFS;
/*
* lastly, skip over the transmit buffer and set up pointers into
* the receive buffer.
*/
scp0->rxbuf_p = paddr0 + addroff;
scp0->rxbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * SCA_NrxBUFS;
if (sc->sc_numports == 2) {
scp1->txbuf_p = paddr0 + addroff;
scp1->txbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * SCA_NtxBUFS;
scp1->rxbuf_p = paddr0 + addroff;
scp1->rxbuf = vaddr0 + addroff;
addroff += SCA_BSIZE * SCA_NrxBUFS;
}
/*
* as a consistancy check, addroff should be equal to the allocation
* size.
*/
if (sc->sc_allocsize != addroff)
printf("ERROR: sc_allocsize != addroff: %lu != %lu\n",
sc->sc_allocsize, addroff);
}
/*
* Queue the packet for our start routine to transmit
*/
static int
sca_output(ifp, m, dst, rt0)
struct ifnet *ifp;
struct mbuf *m;
struct sockaddr *dst;
struct rtentry *rt0;
{
int error;
int s;
u_int16_t protocol;
hdlc_header_t *hdlc;
struct ifqueue *ifq;
#ifdef SCA_USE_FASTQ
struct ip *ip;
sca_port_t *scp = ifp->if_softc;
int highpri;
#endif
error = 0;
ifp->if_lastchange = time;
if ((ifp->if_flags & IFF_UP) != IFF_UP) {
error = ENETDOWN;
goto bad;
}
if (dst->sa_family != AF_INET) {
error = EAFNOSUPPORT;
goto bad;
}
#ifdef SCA_USE_FASTQ
highpri = 0;
#endif
/*
* determine address family, and priority for this packet
*/
switch (dst->sa_family) {
case AF_INET:
protocol = HDLC_PROTOCOL_IP;
#ifdef SCA_USE_FASTQ
ip = mtod(m, struct ip *);
if ((ip->ip_tos & IPTOS_LOWDELAY) == IPTOS_LOWDELAY)
highpri = 1;
#endif
break;
default:
printf("%s: address family %d unsupported\n",
ifp->if_xname, dst->sa_family);
error = EAFNOSUPPORT;
goto bad;
}
if (M_LEADINGSPACE(m) < HDLC_HDRLEN) {
m = m_prepend(m, HDLC_HDRLEN, M_DONTWAIT);
if (m == NULL) {
error = ENOBUFS;
goto bad;
}
m->m_len = 0;
} else {
m->m_data -= HDLC_HDRLEN;
}
hdlc = mtod(m, hdlc_header_t *);
if ((m->m_flags & (M_BCAST | M_MCAST)) != 0)
hdlc->addr = CISCO_MULTICAST;
else
hdlc->addr = CISCO_UNICAST;
hdlc->control = 0;
hdlc->protocol = htons(protocol);
m->m_len += HDLC_HDRLEN;
/*
* queue the packet. If interactive, use the fast queue.
*/
s = splnet();
#ifdef SCA_USE_FASTQ
ifq = (highpri == 1 ? &scp->fastq : &ifp->if_snd);
#else
ifq = &ifp->if_snd;
#endif
if (IF_QFULL(ifq)) {
IF_DROP(ifq);
ifp->if_oerrors++;
ifp->if_collisions++;
error = ENOBUFS;
splx(s);
goto bad;
}
ifp->if_obytes += m->m_pkthdr.len;
IF_ENQUEUE(ifq, m);
ifp->if_lastchange = time;
if (m->m_flags & M_MCAST)
ifp->if_omcasts++;
sca_start(ifp);
splx(s);
return (error);
bad:
if (m)
m_freem(m);
return (error);
}
static int
sca_ioctl(ifp, cmd, addr)
struct ifnet *ifp;
u_long cmd;
caddr_t addr;
{
struct ifreq *ifr;
struct ifaddr *ifa;
int error;
int s;
s = splnet();
ifr = (struct ifreq *)addr;
ifa = (struct ifaddr *)addr;
error = 0;
switch (cmd) {
case SIOCSIFADDR:
if (ifa->ifa_addr->sa_family == AF_INET)
sca_port_up(ifp->if_softc);
else
error = EAFNOSUPPORT;
break;
case SIOCSIFDSTADDR:
if (ifa->ifa_addr->sa_family != AF_INET)
error = EAFNOSUPPORT;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (ifr == 0) {
error = EAFNOSUPPORT; /* XXX */
break;
}
switch (ifr->ifr_addr.sa_family) {
#ifdef INET
case AF_INET:
break;
#endif
default:
error = EAFNOSUPPORT;
break;
}
break;
case SIOCSIFFLAGS:
if (ifr->ifr_flags & IFF_UP)
sca_port_up(ifp->if_softc);
else
sca_port_down(ifp->if_softc);
break;
default:
error = EINVAL;
}
splx(s);
return error;
}
/*
* start packet transmission on the interface
*
* MUST BE CALLED AT splnet()
*/
static void
sca_start(ifp)
struct ifnet *ifp;
{
sca_port_t *scp = ifp->if_softc;
struct sca_softc *sc = scp->sca;
struct mbuf *m, *mb_head;
sca_desc_t *desc;
u_int8_t *buf, *obuf;
u_int32_t buf_p;
int trigger_xmit;
/*
* can't queue when we are full or transmitter is busy
*/
if ((scp->txinuse >= (SCA_NtxBUFS - 1))
|| ((ifp->if_flags & IFF_OACTIVE) == IFF_OACTIVE))
return;
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam,
0, sc->sc_allocsize,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
trigger_xmit = 0;
txloop:
IF_DEQUEUE(&scp->linkq, mb_head);
if (mb_head == NULL)
#ifdef SCA_USE_FASTQ
IF_DEQUEUE(&scp->fastq, mb_head);
if (mb_head == NULL)
#endif
IF_DEQUEUE(&ifp->if_snd, mb_head);
if (mb_head == NULL)
goto start_xmit;
desc = &scp->txdesc[scp->txcur];
if (scp->txinuse != 0) {
desc->stat &= ~SCA_DESC_EOT;
desc = &scp->txdesc[scp->txcur];
}
buf = scp->txbuf + SCA_BSIZE * scp->txcur;
obuf = buf;
buf_p = scp->txbuf_p + SCA_BSIZE * scp->txcur;
desc->bp = (u_int16_t)(buf_p & 0x0000ffff);
desc->bpb = (u_int8_t)((buf_p & 0x00ff0000) >> 16);
desc->stat = SCA_DESC_EOT | SCA_DESC_EOM; /* end of frame and xfer */
desc->len = 0;
/*
* Run through the chain, copying data into the descriptor as we
* go. If it won't fit in one transmission block, drop the packet.
* No, this isn't nice, but most of the time it _will_ fit.
*/
for (m = mb_head ; m != NULL ; m = m->m_next) {
if (m->m_len != 0) {
desc->len += m->m_len;
if (desc->len > SCA_BSIZE) {
m_freem(mb_head);
goto txloop;
}
bcopy(mtod(m, u_int8_t *), buf, m->m_len);
buf += m->m_len;
}
}
ifp->if_opackets++;
#if NBPFILTER > 0
/*
* Pass packet to bpf if there is a listener.
*/
if (scp->sp_bpf)
bpf_mtap(scp->sp_bpf, mb_head);
#endif
m_freem(mb_head);
if (scp->txinuse != 0) {
scp->txcur++;
if (scp->txcur == SCA_NtxBUFS)
scp->txcur = 0;
}
scp->txinuse++;
trigger_xmit = 1;
SCA_DPRINTF(SCA_DEBUG_TX,
("TX: inuse %d index %d\n", scp->txinuse, scp->txcur));
if (scp->txinuse < (SCA_NtxBUFS - 1))
goto txloop;
start_xmit:
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmam,
0, sc->sc_allocsize,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
if (trigger_xmit != 0)
sca_port_starttx(scp);
}
static void
sca_watchdog(ifp)
struct ifnet *ifp;
{
}
int
sca_hardintr(struct sca_softc *sc)
{
u_int8_t isr0, isr1, isr2;
int ret;
ret = 0; /* non-zero means we processed at least one interrupt */
while (1) {
/*
* read SCA interrupts
*/
isr0 = sca_read_1(sc, SCA_ISR0);
isr1 = sca_read_1(sc, SCA_ISR1);
isr2 = sca_read_1(sc, SCA_ISR2);
if (isr0 == 0 && isr1 == 0 && isr2 == 0)
break;
SCA_DPRINTF(SCA_DEBUG_INTR,
("isr0 = %02x, isr1 = %02x, isr2 = %02x\n",
isr0, isr1, isr2));
/*
* check DMA interrupt
*/
if (isr1 & 0x0f)
ret += sca_dmac_intr(&sc->sc_ports[0],
isr1 & 0x0f);
if (isr1 & 0xf0)
ret += sca_dmac_intr(&sc->sc_ports[1],
(isr1 & 0xf0) >> 4);
if (isr0)
ret += sca_msci_intr(sc, isr0);
#if 0 /* We don't GET timer interrupts, we have them disabled (msci IE20) */
if (isr2)
ret += sca_timer_intr(sc, isr2);
#endif
}
return (ret);
}
static int
sca_dmac_intr(sca_port_t *scp, u_int8_t isr)
{
u_int8_t dsr;
int ret;
ret = 0;
/*
* Check transmit channel
*/
if (isr & 0x0c) {
SCA_DPRINTF(SCA_DEBUG_INTR,
("TX INTERRUPT port %d\n", scp->sp_port));
dsr = 1;
while (dsr != 0) {
ret++;
/*
* reset interrupt
*/
dsr = dmac_read_1(scp, SCA_DSR1);
dmac_write_1(scp, SCA_DSR1,
dsr | SCA_DSR_DEWD);
/*
* filter out the bits we don't care about
*/
dsr &= ( SCA_DSR_COF | SCA_DSR_BOF | SCA_DSR_EOT);
if (dsr == 0)
break;
/*
* check for counter overflow
*/
if (dsr & SCA_DSR_COF) {
printf("%s: TXDMA counter overflow\n",
scp->sp_if.if_xname);
scp->sp_if.if_flags &= ~IFF_OACTIVE;
scp->txcur = 0;
scp->txinuse = 0;
}
/*
* check for buffer overflow
*/
if (dsr & SCA_DSR_BOF) {
printf("%s: TXDMA buffer overflow, cda 0x%04x, eda 0x%04x, cpb 0x%02x\n",
scp->sp_if.if_xname,
dmac_read_2(scp, SCA_CDAL1),
dmac_read_2(scp, SCA_EDAL1),
dmac_read_1(scp, SCA_CPB1));
/*
* Yikes. Arrange for a full
* transmitter restart.
*/
scp->sp_if.if_flags &= ~IFF_OACTIVE;
scp->txcur = 0;
scp->txinuse = 0;
}
/*
* check for end of transfer, which is not
* an error. It means that all data queued
* was transmitted, and we mark ourself as
* not in use and stop the watchdog timer.
*/
if (dsr & SCA_DSR_EOT) {
SCA_DPRINTF(SCA_DEBUG_TX,
("Transmit completed.\n"));
scp->sp_if.if_flags &= ~IFF_OACTIVE;
scp->txcur = 0;
scp->txinuse = 0;
/*
* check for more packets
*/
sca_start(&scp->sp_if);
}
}
}
/*
* receive channel check
*/
if (isr & 0x03) {
SCA_DPRINTF(SCA_DEBUG_INTR,
("RX INTERRUPT port %d\n", mch));
dsr = 1;
while (dsr != 0) {
ret++;
dsr = dmac_read_1(scp, SCA_DSR0);
dmac_write_1(scp, SCA_DSR0, dsr | SCA_DSR_DEWD);
/*
* filter out the bits we don't care about
*/
dsr &= (SCA_DSR_EOM | SCA_DSR_COF
| SCA_DSR_BOF | SCA_DSR_EOT);
if (dsr == 0)
break;
/*
* End of frame
*/
if (dsr & SCA_DSR_EOM) {
SCA_DPRINTF(SCA_DEBUG_RX, ("Got a frame!\n"));
sca_get_packets(scp);
}
/*
* check for counter overflow
*/
if (dsr & SCA_DSR_COF) {
printf("%s: RXDMA counter overflow\n",
scp->sp_if.if_xname);
sca_dmac_rxinit(scp);
}
/*
* check for end of transfer, which means we
* ran out of descriptors to receive into.
* This means the line is much faster than
* we can handle.
*/
if (dsr & (SCA_DSR_BOF | SCA_DSR_EOT)) {
printf("%s: RXDMA buffer overflow\n",
scp->sp_if.if_xname);
sca_dmac_rxinit(scp);
}
}
}
return ret;
}
static int
sca_msci_intr(struct sca_softc *sc, u_int8_t isr)
{
printf("Got msci interrupt XXX\n");
return 0;
}
static void
sca_get_packets(sca_port_t *scp)
{
int descidx;
sca_desc_t *desc;
u_int8_t *buf;
bus_dmamap_sync(scp->sca->sc_dmat, scp->sca->sc_dmam,
0, scp->sca->sc_allocsize,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/*
* Loop while there are packets to receive. After each is processed,
* call sca_frame_skip() to update the DMA registers to the new
* state.
*/
while (sca_frame_avail(scp, &descidx)) {
desc = &scp->rxdesc[descidx];
buf = scp->rxbuf + SCA_BSIZE * descidx;
sca_frame_process(scp, desc, buf);
#if SCA_DEBUG_LEVEL > 0
if (sca_debug & SCA_DEBUG_RXPKT)
sca_frame_print(scp, desc, buf);
#endif
sca_frame_skip(scp, descidx);
}
bus_dmamap_sync(scp->sca->sc_dmat, scp->sca->sc_dmam,
0, scp->sca->sc_allocsize,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
}
/*
* Starting with the first descriptor we wanted to read into, up to but
* not including the current SCA read descriptor, look for a packet.
*/
static int
sca_frame_avail(sca_port_t *scp, int *descindx)
{
u_int16_t cda;
int cdaidx;
u_int32_t desc_p; /* physical address (lower 16 bits) */
sca_desc_t *desc;
u_int8_t rxstat;
/*
* Read the current descriptor from the SCA.
*/
cda = dmac_read_2(scp, SCA_CDAL0);
/*
* calculate the index of the current descriptor
*/
desc_p = cda - (u_int16_t)(scp->rxdesc_p & 0x0000ffff);
cdaidx = desc_p / sizeof(sca_desc_t);
if (cdaidx >= SCA_NrxBUFS)
return 0;
for (;;) {
/*
* if the SCA is reading into the first descriptor, we somehow
* got this interrupt incorrectly. Just return that there are
* no packets ready.
*/
if (cdaidx == scp->rxstart)
return 0;
/*
* We might have a valid descriptor. Set up a pointer
* to the kva address for it so we can more easily examine
* the contents.
*/
desc = &scp->rxdesc[scp->rxstart];
rxstat = desc->stat;
/*
* check for errors
*/
if (rxstat & SCA_DESC_ERRORS)
goto nextpkt;
/*
* full packet? Good.
*/
if (rxstat & SCA_DESC_EOM) {
*descindx = scp->rxstart;
return 1;
}
/*
* increment the rxstart address, since this frame is
* somehow damaged. Skip over it in later calls.
* XXX This breaks multidescriptor receives, so each
* frame HAS to fit within one descriptor's buffer
* space now...
*/
nextpkt:
scp->rxstart++;
if (scp->rxstart == SCA_NrxBUFS)
scp->rxstart = 0;
}
return 0;
}
/*
* Pass the packet up to the kernel if it is a packet we want to pay
* attention to.
*
* MUST BE CALLED AT splnet()
*/
static void
sca_frame_process(sca_port_t *scp, sca_desc_t *desc, u_int8_t *p)
{
hdlc_header_t *hdlc;
cisco_pkt_t *cisco, *ncisco;
u_int16_t len;
struct mbuf *m;
u_int8_t *nbuf;
u_int32_t t = (time.tv_sec - boottime.tv_sec) * 1000;
struct ifqueue *ifq;
len = desc->len;
/*
* skip packets that are too short
*/
if (len < sizeof(hdlc_header_t))
return;
#if NBPFILTER > 0
if (scp->sp_bpf)
bpf_tap(scp->sp_bpf, p, len);
#endif
/*
* read and then strip off the HDLC information
*/
hdlc = (hdlc_header_t *)p;
scp->sp_if.if_ipackets++;
scp->sp_if.if_lastchange = time;
switch (ntohs(hdlc->protocol)) {
case HDLC_PROTOCOL_IP:
SCA_DPRINTF(SCA_DEBUG_RX, ("Received IP packet\n"));
m = sca_mbuf_alloc(p, len);
if (m == NULL) {
scp->sp_if.if_iqdrops++;
return;
}
m->m_pkthdr.rcvif = &scp->sp_if;
if (IF_QFULL(&ipintrq)) {
IF_DROP(&ipintrq);
scp->sp_if.if_ierrors++;
scp->sp_if.if_iqdrops++;
m_freem(m);
} else {
/*
* strip off the HDLC header and hand off to IP stack
*/
m->m_pkthdr.len -= HDLC_HDRLEN;
m->m_data += HDLC_HDRLEN;
m->m_len -= HDLC_HDRLEN;
IF_ENQUEUE(&ipintrq, m);
schednetisr(NETISR_IP);
}
break;
case CISCO_KEEPALIVE:
SCA_DPRINTF(SCA_DEBUG_CISCO,
("Received CISCO keepalive packet\n"));
if (len < CISCO_PKT_LEN) {
SCA_DPRINTF(SCA_DEBUG_CISCO,
("short CISCO packet %d, wanted %d\n",
len, CISCO_PKT_LEN));
return;
}
/*
* allocate an mbuf and copy the important bits of data
* into it.
*/
m = sca_mbuf_alloc(p, HDLC_HDRLEN + CISCO_PKT_LEN);
if (m == NULL)
return;
nbuf = mtod(m, u_int8_t *);
ncisco = (cisco_pkt_t *)(nbuf + HDLC_HDRLEN);
m->m_pkthdr.rcvif = &scp->sp_if;
cisco = (cisco_pkt_t *)(p + HDLC_HDRLEN);
switch (ntohl(cisco->type)) {
case CISCO_ADDR_REQ:
printf("Got CISCO addr_req, ignoring\n");
m_freem(m);
break;
case CISCO_ADDR_REPLY:
printf("Got CISCO addr_reply, ignoring\n");
m_freem(m);
break;
case CISCO_KEEPALIVE_REQ:
SCA_DPRINTF(SCA_DEBUG_CISCO,
("Received KA, mseq %d,"
" yseq %d, rel 0x%04x, t0"
" %04x, t1 %04x\n",
ntohl(cisco->par1), ntohl(cisco->par2),
ntohs(cisco->rel), ntohs(cisco->time0),
ntohs(cisco->time1)));
scp->cka_lastrx = ntohl(cisco->par1);
scp->cka_lasttx++;
/*
* schedule the transmit right here.
*/
ncisco->par2 = cisco->par1;
ncisco->par1 = htonl(scp->cka_lasttx);
ncisco->time0 = htons((u_int16_t)(t >> 16));
ncisco->time1 = htons((u_int16_t)(t & 0x0000ffff));
ifq = &scp->linkq;
if (IF_QFULL(ifq)) {
IF_DROP(ifq);
m_freem(m);
return;
}
IF_ENQUEUE(ifq, m);
sca_start(&scp->sp_if);
break;
default:
m_freem(m);
SCA_DPRINTF(SCA_DEBUG_CISCO,
("Unknown CISCO keepalive protocol 0x%04x\n",
ntohl(cisco->type)));
return;
}
break;
default:
SCA_DPRINTF(SCA_DEBUG_RX,
("Unknown/unexpected ethertype 0x%04x\n",
ntohs(hdlc->protocol)));
}
}
#if SCA_DEBUG_LEVEL > 0
/*
* do a hex dump of the packet received into descriptor "desc" with
* data buffer "p"
*/
static void
sca_frame_print(sca_port_t *scp, sca_desc_t *desc, u_int8_t *p)
{
int i;
int nothing_yet = 1;
printf("descriptor va %p: cp 0x%x bpb 0x%0x bp 0x%0x stat 0x%0x len %d\n",
desc, desc->cp, desc->bpb, desc->bp, desc->stat, desc->len);
for (i = 0 ; i < desc->len ; i++) {
if (nothing_yet == 1 && *p == 0) {
p++;
continue;
}
nothing_yet = 0;
if (i % 16 == 0)
printf("\n");
printf("%02x ", *p++);
}
if (i % 16 != 1)
printf("\n");
}
#endif
/*
* skip all frames before the descriptor index "indx" -- we do this by
* moving the rxstart pointer to the index following this one, and
* setting the end descriptor to this index.
*/
static void
sca_frame_skip(sca_port_t *scp, int indx)
{
u_int32_t desc_p;
scp->rxstart++;
if (scp->rxstart == SCA_NrxBUFS)
scp->rxstart = 0;
desc_p = scp->rxdesc_p * sizeof(sca_desc_t) * indx;
dmac_write_2(scp, SCA_EDAL0,
(u_int16_t)(desc_p & 0x0000ffff));
}
/*
* set a port to the "up" state
*/
static void
sca_port_up(sca_port_t *scp)
{
struct sca_softc *sc = scp->sca;
/*
* reset things
*/
#if 0
msci_write_1(scp, SCA_CMD0, SCA_CMD_TXRESET);
msci_write_1(scp, SCA_CMD0, SCA_CMD_RXRESET);
#endif
/*
* clear in-use flag
*/
scp->sp_if.if_flags &= ~IFF_OACTIVE;
/*
* raise DTR
*/
sc->dtr_callback(sc->dtr_aux, scp->sp_port, 1);
/*
* raise RTS
*/
msci_write_1(scp, SCA_CTL0,
msci_read_1(scp, SCA_CTL0) & ~SCA_CTL_RTS);
/*
* enable interrupts
*/
if (scp->sp_port == 0) {
sca_write_1(sc, SCA_IER0, sca_read_1(sc, SCA_IER0) | 0x0f);
sca_write_1(sc, SCA_IER1, sca_read_1(sc, SCA_IER1) | 0x0f);
} else {
sca_write_1(sc, SCA_IER0, sca_read_1(sc, SCA_IER0) | 0xf0);
sca_write_1(sc, SCA_IER1, sca_read_1(sc, SCA_IER1) | 0xf0);
}
/*
* enable transmit and receive
*/
msci_write_1(scp, SCA_CMD0, SCA_CMD_TXENABLE);
msci_write_1(scp, SCA_CMD0, SCA_CMD_RXENABLE);
/*
* reset internal state
*/
scp->txinuse = 0;
scp->txcur = 0;
scp->cka_lasttx = time.tv_usec;
scp->cka_lastrx = 0;
}
/*
* set a port to the "down" state
*/
static void
sca_port_down(sca_port_t *scp)
{
struct sca_softc *sc = scp->sca;
/*
* lower DTR
*/
sc->dtr_callback(sc->dtr_aux, scp->sp_port, 0);
/*
* lower RTS
*/
msci_write_1(scp, SCA_CTL0,
msci_read_1(scp, SCA_CTL0) | SCA_CTL_RTS);
/*
* disable interrupts
*/
if (scp->sp_port == 0) {
sca_write_1(sc, SCA_IER0, sca_read_1(sc, SCA_IER0) & 0xf0);
sca_write_1(sc, SCA_IER1, sca_read_1(sc, SCA_IER1) & 0xf0);
} else {
sca_write_1(sc, SCA_IER0, sca_read_1(sc, SCA_IER0) & 0x0f);
sca_write_1(sc, SCA_IER1, sca_read_1(sc, SCA_IER1) & 0x0f);
}
/*
* disable transmit and receive
*/
msci_write_1(scp, SCA_CMD0, SCA_CMD_RXDISABLE);
msci_write_1(scp, SCA_CMD0, SCA_CMD_TXDISABLE);
/*
* no, we're not in use anymore
*/
scp->sp_if.if_flags &= ~IFF_OACTIVE;
}
/*
* disable all DMA and interrupts for all ports at once.
*/
void
sca_shutdown(struct sca_softc *sca)
{
/*
* disable DMA and interrupts
*/
sca_write_1(sca, SCA_DMER, 0);
sca_write_1(sca, SCA_IER0, 0);
sca_write_1(sca, SCA_IER1, 0);
}
/*
* If there are packets to transmit, start the transmit DMA logic.
*/
static void
sca_port_starttx(sca_port_t *scp)
{
struct sca_softc *sc;
u_int32_t startdesc_p, enddesc_p;
int enddesc;
sc = scp->sca;
if (((scp->sp_if.if_flags & IFF_OACTIVE) == IFF_OACTIVE)
|| scp->txinuse == 0)
return;
scp->sp_if.if_flags |= IFF_OACTIVE;
/*
* We have something to do, since we have at least one packet
* waiting, and we are not already marked as active.
*/
enddesc = scp->txcur;
enddesc++;
if (enddesc == SCA_NtxBUFS)
enddesc = 0;
startdesc_p = scp->txdesc_p;
enddesc_p = scp->txdesc_p + sizeof(sca_desc_t) * enddesc;
dmac_write_2(scp, SCA_EDAL1, (u_int16_t)(enddesc_p & 0x0000ffff));
dmac_write_2(scp, SCA_CDAL1,
(u_int16_t)(startdesc_p & 0x0000ffff));
/*
* enable the DMA
*/
dmac_write_1(scp, SCA_DSR1, SCA_DSR_DE);
}
/*
* allocate an mbuf at least long enough to hold "len" bytes.
* If "p" is non-NULL, copy "len" bytes from it into the new mbuf,
* otherwise let the caller handle copying the data in.
*/
static struct mbuf *
sca_mbuf_alloc(caddr_t p, u_int len)
{
struct mbuf *m;
/*
* allocate an mbuf and copy the important bits of data
* into it. If the packet won't fit in the header,
* allocate a cluster for it and store it there.
*/
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return NULL;
if (len > MHLEN) {
if (len > MCLBYTES) {
m_freem(m);
return NULL;
}
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return NULL;
}
}
if (p != NULL)
bcopy(p, mtod(m, caddr_t), len);
m->m_len = len;
m->m_pkthdr.len = len;
return (m);
}
Reference in New Issue View Git Blame Copy Permalink