NetBSD/sys/arch/arc/conf/PCCONS

360 lines
12 KiB
Plaintext

# $NetBSD: PCCONS,v 1.7 2001/06/13 15:37:27 soda Exp $
# $OpenBSD: GENERIC,v 1.29 1999/08/29 12:14:03 niklas Exp $
#
# PCCONS -- generic but pccons rather than wscons
#
include "arch/arc/conf/std.arc"
maxusers 32 # estimated number of users
# Platform support
options PLATFORM_ACER_PICA_61 # Pica, NEC ImageRISCstation
options PLATFORM_DESKTECH_ARCSTATION_I # DESKstation rPC44
options PLATFORM_DESKTECH_TYNE # DESKstation Tyne
options PLATFORM_MICROSOFT_JAZZ # MIPS Magnum
options PLATFORM_NEC_JC94 # NEC Express 5800/230 PCI R4K
options PLATFORM_NEC_R94 # NEC RISCstation 2200 EISA
options PLATFORM_NEC_R96 # NEC Express RISCserver, RISCserver 2200
options PLATFORM_NEC_RAX94 # NEC RISCstation 2200 PCI
options PLATFORM_NEC_RD94 # NEC RISCstation 2250
options PLATFORM_SNI_RM200PCI
# Standard system options
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing via ktrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
options LKM # loadable kernel modules
# Diagnostic/debugging support options
options DIAGNOSTIC # cheap kernel consistency checks
#options DEBUG # expensive debugging checks/support
#options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options KGDB # remote gdb
#options KGDBRATE=19200 # kernel gdb port rate (default 9600)
#options KGDBDEV="17*256+0" # device for kernel gdb
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
options COMPAT_12 # NetBSD 1.2,
options COMPAT_13 # NetBSD 1.3,
options COMPAT_14 # NetBSD 1.4,
options COMPAT_43 # and 4.3BSD
options COMPAT_386BSD_MBRPART # recognize old partition ID
# mipsel specific
options COMPAT_ULTRIX # Ultrix binary compatibility
options EXEC_ECOFF # Ultrix RISC binaries are ECOFF format
# File systems
file-system FFS # fast filesystem
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system NFS # Network File System client
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcoda (below)
# File system options
options QUOTA # FFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # IP packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI networking
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
#options TCP_COMPAT_42
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options EISAVERBOSE # verbose EISA device autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
options SCSIVERBOSE # human readable SCSI error messages
# wscons terminal emulation
options WSEMUL_VT100 # VT100 emulation
# Kernel root file system and dump configuration.
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu* at mainbus0
#### Jazz-Internal bus devices
# PLATFORM_ACER_PICA_61
# PLATFORM_MICROSOFT_JAZZ
# PLATFORM_NEC_JC94
# PLATFORM_NEC_R94
# PLATFORM_NEC_R96
# PLATFORM_NEC_RAX94
# PLATFORM_NEC_RD94
jazzio* at mainbus0 # Jazz-Internal bus host bridge.
timer0 at jazzio?
mcclock0 at jazzio?
pc0 at jazzio?
opms0 at jazzio?
com0 at jazzio?
com1 at jazzio?
lpt0 at jazzio?
sn0 at jazzio?
fdc0 at jazzio?
fd* at fdc? drive ?
asc0 at jazzio? # NCR53C9x SCSI
scsibus* at asc?
osiop0 at jazzio? flags 0x00000 # NCR53C710 SCSI
osiop1 at jazzio? flags 0x00000
scsibus* at osiop?
#oosiop0 at jazzio? # NCR53C700 SCSI
#oosiop1 at jazzio?
#scsibus* at oosiop?
#### ISA bus devices
# PLATFORM_ACER_PICA_61
# PLATFORM_MICROSOFT_JAZZ
# PLATFORM_NEC_R94
# PLATFORM_NEC_R96
jazzisabr* at mainbus0 # Jazz-(E)ISA bus bridge.
isa* at jazzisabr?
# PLATFORM_DESKTECH_ARCSTATION_I
arcsisabr* at mainbus0 # DESKstation rPC44 ISA host bridge.
isa* at arcsisabr?
# PLATFORM_DESKTECH_TYNE
tyneisabr* at mainbus0 # DESKstation Tyne ISA host bridge.
isa* at tyneisabr?
#isadma0 at isa?
timer0 at isa? port 0x40 irq 0
mcclock0 at isa? port 0x70
pc0 at isa? irq 1 # generic PC console device
opms0 at isa? irq 12 # PS/2 auxiliary port mouse
#vga0 at isa?
#pckbc0 at isa? # PC keyboard controller
com0 at isa? port 0x3f8 irq 4
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 4
com3 at isa? port 0x2e8 irq 3
ast0 at isa? port 0x1a0 irq 3 # AST 4-port serial cards
com* at ast? slave ?
# Joystick driver. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
# XXX - should be configured
#wdc0 at isa? port 0x1f0 irq 14 flags 0x00
#wdc1 at isa? port 0x170 irq 15 flags 0x00
#wdc* at isapnp?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
# XXX - should be configured
#wd* at wdc? channel ? drive ? flags 0x0000
# ATAPI bus support
# XXX - should be configured
#atapibus* at wdc? channel ?
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7
# ISA network interfaces
# XXX - should be configured
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#ep0 at isa? port ? irq ? # 3C509 ethernet cards
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
#ne1 at isa? port 0x300 irq 10
#ne* at isapnp? # NE[12]000 PnP ethernet
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
#we* at isapnp?
# XXX - should be configured
#btl0 at isa? port 0x330 irq ? drq ?
#scsibus* at btl?
#### PCI bus devices
# PLATFORM_NEC_JC94
# PLATFORM_NEC_RAX94
# PLATFORM_NEC_RD94
necpb* at mainbus0 # NEC RISCstation PCI host bridge.
pci* at necpb?
#pcivga* at pci? dev ? function ?
tga* at pci? dev ? function ? # DEC ZLXp-E[123] Graphics
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
scsibus* at ahc?
iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
scsibus* at iha?
#siop* at pci? dev ? function ? # NCR/Symbios 53c8xx SCSI
#scsibus* at siop?
#de* at pci? dev ? function ?
ex* at pci? dev ? function ? # 3Com 90x[B]
fxp* at pci? dev ? function ? # Intel EtherExpress PRO
le* at pci? dev ? function ? # PCnet-PCI
ne* at pci? dev ? function ? # NE2000-compatible
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones)
#options TLP_MATCH_21040
#options TLP_MATCH_21041
#options TLP_MATCH_21140
#options TLP_MATCH_21142
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci ? dev ? function ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
atapibus* at pciide? channel ?
#### MII/PHY support
exphy* at mii? phy ? # 3Com internal PHYs
icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890
inphy* at mii? phy ? # Intel 82555 PHYs
iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
nsphyter* at mii? phy ? # NS83843 PHYs
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
tlphy* at mii? phy ? # ThunderLAN PHYs
tqphy* at mii? phy ? # TDK Semiconductor PHYs
ukphy* at mii? phy ? # generic unknown PHYs
#### SCSI bus devices
sd* at scsibus? target ? lun ?
st* at scsibus? target ? lun ?
cd* at scsibus? target ? lun ?
ch* at scsibus? target ? lun ?
ss* at scsibus? target ? lun ?
uk* at scsibus? target ? lun ?
#### ATAPI bus devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
#### Workstation Console attachments
wsdisplay* at tga?
#### Pseudo devices
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device raid 4 # RAIDframe disk driver
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop 1 # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device sl 2 # Serial Line IP
#pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device tun 2 # network tunneling over tty
#pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
#pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port arc yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
# mouse & keyboard multiplexor pseudo-devices
#pseudo-device wsmux 2