NetBSD/sys/dev/isa/if_fmv_isa.c

291 lines
7.8 KiB
C

/* $NetBSD: if_fmv_isa.c,v 1.9 2006/11/16 01:33:00 christos Exp $ */
/*
* All Rights Reserved, Copyright (C) Fujitsu Limited 1995
*
* This software may be used, modified, copied, distributed, and sold, in
* both source and binary form provided that the above copyright, these
* terms and the following disclaimer are retained. The name of the author
* and/or the contributor may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND THE CONTRIBUTOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR THE CONTRIBUTOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION.
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Portions copyright (C) 1993, David Greenman. This software may be used,
* modified, copied, distributed, and sold, in both source and binary form
* provided that the above copyright and these terms are retained. Under no
* circumstances is the author responsible for the proper functioning of this
* software, nor does the author assume any responsibility for damages
* incurred with its use.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_fmv_isa.c,v 1.9 2006/11/16 01:33:00 christos Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/ic/mb86960reg.h>
#include <dev/ic/mb86960var.h>
#include <dev/ic/fmvreg.h>
#include <dev/ic/fmvvar.h>
#include <dev/isa/isavar.h>
int fmv_isa_match(struct device *, struct cfdata *, void *);
void fmv_isa_attach(struct device *, struct device *, void *);
struct fmv_isa_softc {
struct mb86960_softc sc_mb86960; /* real "mb86960" softc */
/* ISA-specific goo. */
void *sc_ih; /* interrupt cookie */
};
CFATTACH_DECL(fmv_isa, sizeof(struct fmv_isa_softc),
fmv_isa_match, fmv_isa_attach, NULL, NULL);
struct fe_simple_probe_struct {
uint8_t port; /* Offset from the base I/O address. */
uint8_t mask; /* Bits to be checked. */
uint8_t bits; /* Values to be compared against. */
};
static inline int fe_simple_probe(bus_space_tag_t, bus_space_handle_t,
struct fe_simple_probe_struct const *);
static int fmv_find(bus_space_tag_t, bus_space_handle_t, int *, int *);
static int const fmv_iomap[8] = {
0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x300, 0x340
};
#define NFMV_IOMAP (sizeof (fmv_iomap) / sizeof (fmv_iomap[0]))
#define FMV_NPORTS 0x20
#ifdef FMV_DEBUG
#define DPRINTF printf
#else
#define DPRINTF while (/* CONSTCOND */0) printf
#endif
/*
* Hardware probe routines.
*/
/*
* Determine if the device is present.
*/
int
fmv_isa_match(struct device *parent, struct cfdata *match,
void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
int i, iobase, irq, rv = 0;
uint8_t myea[ETHER_ADDR_LEN];
if (ia->ia_nio < 1)
return 0;
if (ia->ia_nirq < 1)
return 0;
if (ISA_DIRECT_CONFIG(ia))
return 0;
/* Disallow wildcarded values. */
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return 0;
/*
* See if the sepcified address is valid for FMV-180 series.
*/
for (i = 0; i < NFMV_IOMAP; i++)
if (fmv_iomap[i] == ia->ia_io[0].ir_addr)
break;
if (i == NFMV_IOMAP) {
DPRINTF("fmv_match: unknown iobase 0x%x\n",
ia->ia_io[0].ir_addr);
return 0;
}
/* Map i/o space. */
if (bus_space_map(iot, ia->ia_io[0].ir_addr, FMV_NPORTS, 0, &ioh)) {
DPRINTF("fmv_match: couldn't map iospace 0x%x\n",
ia->ia_io[0].ir_addr);
return 0;
}
if (fmv_find(iot, ioh, &iobase, &irq) == 0) {
DPRINTF("fmv_match: fmv_find failed\n");
goto out;
}
if (iobase != ia->ia_io[0].ir_addr) {
DPRINTF("fmv_match: unexpected iobase in board: 0x%x\n",
iobase);
goto out;
}
if (fmv_detect(iot, ioh, myea) == 0) { /* XXX necessary? */
DPRINTF("fmv_match: fmv_detect failed\n");
goto out;
}
if (ia->ia_irq[0].ir_irq != ISA_UNKNOWN_IRQ) {
if (ia->ia_irq[0].ir_irq != irq) {
printf("fmv_match: irq mismatch; "
"kernel configured %d != board configured %d\n",
ia->ia_irq[0].ir_irq, irq);
goto out;
}
} else
ia->ia_irq[0].ir_irq = irq;
ia->ia_nio = 1;
ia->ia_io[0].ir_size = FMV_NPORTS;
ia->ia_nirq = 1;
ia->ia_niomem = 0;
ia->ia_ndrq = 0;
rv = 1;
out:
bus_space_unmap(iot, ioh, FMV_NPORTS);
return rv;
}
/*
* Check for specific bits in specific registers have specific values.
*/
static inline int
fe_simple_probe(bus_space_tag_t iot, bus_space_handle_t ioh,
struct fe_simple_probe_struct const *sp)
{
uint8_t val;
struct fe_simple_probe_struct const *p;
for (p = sp; p->mask != 0; p++) {
val = bus_space_read_1(iot, ioh, p->port);
if ((val & p->mask) != p->bits) {
DPRINTF("fe_simple_probe: %x & %x != %x\n",
val, p->mask, p->bits);
return 0;
}
}
return 1;
}
/*
* Hardware (vendor) specific probe routines.
*/
/*
* Probe Fujitsu FMV-180 series boards and get iobase and irq from
* board.
*/
static int
fmv_find(bus_space_tag_t iot, bus_space_handle_t ioh, int *iobase, int *irq)
{
uint8_t config;
static int const fmv_irqmap[4] = { 3, 7, 10, 15 };
static struct fe_simple_probe_struct const probe_table[] = {
{ FE_DLCR2, 0x70, 0x00 },
{ FE_DLCR4, 0x08, 0x00 },
/* { FE_DLCR5, 0x80, 0x00 }, Doesn't work. */
{ FE_FMV0, FE_FMV0_MAGIC_MASK, FE_FMV0_MAGIC_VALUE },
{ FE_FMV1, FE_FMV1_MAGIC_MASK, FE_FMV1_MAGIC_VALUE },
{ FE_FMV3, FE_FMV3_EXTRA_MASK, FE_FMV3_EXTRA_VALUE },
#if 1
/*
* Test *vendor* part of the station address for Fujitsu.
* The test will gain reliability of probe process, but
* it rejects FMV-180 clone boards manufactured by other vendors.
* We have to turn the test off when such cards are made available.
*/
{ FE_FMV4, 0xFF, 0x00 },
{ FE_FMV5, 0xFF, 0x00 },
{ FE_FMV6, 0xFF, 0x0E },
#else
/*
* We can always verify the *first* 2 bits (in Ehternet
* bit order) are "no multicast" and "no local" even for
* unknown vendors.
*/
{ FE_FMV4, 0x03, 0x00 },
#endif
{ 0, 0x00, 0x00 },
};
/* Simple probe. */
if (fe_simple_probe(iot, ioh, probe_table) != 0)
return 0;
/* Check if our I/O address matches config info on EEPROM. */
config = bus_space_read_1(iot, ioh, FE_FMV2);
*iobase = fmv_iomap[(config & FE_FMV2_ADDR) >> FE_FMV2_ADDR_SHIFT];
/*
* Determine which IRQ to be used.
*
* In this version, we always get an IRQ assignment from the
* FMV-180's configuration EEPROM, ignoring that specified in
* config file.
*/
*irq = fmv_irqmap[(config & FE_FMV2_IRQ) >> FE_FMV2_IRQ_SHIFT];
return 1;
}
void
fmv_isa_attach(struct device *parent, struct device *self,
void *aux)
{
struct fmv_isa_softc *isc = (struct fmv_isa_softc *)self;
struct mb86960_softc *sc = &isc->sc_mb86960;
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
/* Map i/o space. */
if (bus_space_map(iot, ia->ia_io[0].ir_addr, FMV_NPORTS, 0, &ioh)) {
printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname);
return;
}
sc->sc_bst = iot;
sc->sc_bsh = ioh;
fmv_attach(sc);
/* Establish the interrupt handler. */
isc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq[0].ir_irq,
IST_EDGE, IPL_NET, mb86960_intr, sc);
if (isc->sc_ih == NULL)
printf("%s: couldn't establish interrupt handler\n",
sc->sc_dev.dv_xname);
}