5171d409a5
This now provides slightly more functionality than the FreeBSD layer1-newbus interface. It was meant to be a simple change to one header and a few c files, but the change rippled all through various stuff. To prevent a change to the kernel<->userland interface right now the kernel is now lying about card types to userland (but who cares). This will be fixed when the userland interface changes, after layer 3 <-> layer 4 has been fixed. Functional changes: Provide a clean interface for hardware drivers to attach to the upper layers. This will need another small change in the B-channel handling when a similar change to the layer 3 <-> layer 4 interface happens. Avoid passing indices into global arrays of pointers around, instead pass the pointers itself. Don't code hardware driver types by predefined magic numbers (think LKM). Prepare for detachable drivers (think pcmcia). While there remove some sets of function pointers always pointing to the same function (meant to be the configurable set of D channel protocol handlers). It is unlikely another supported D-channel protocol will fit into that (maximal layer interface) abstraction. When we get support for another protocol, we will need to come up with a workable interface. Besides, the old implementation was, uhm, strange.
1288 lines
32 KiB
C
1288 lines
32 KiB
C
/*
|
|
* Copyright (c) 1997-1999 Martin Husemann. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
* 4. Altered versions must be plainly marked as such, and must not be
|
|
* misrepresented as being the original software and/or documentation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*---------------------------------------------------------------------------
|
|
*
|
|
* isic_isa.c - ISA bus frontend for i4b_isic driver
|
|
* --------------------------------------------------
|
|
*
|
|
* $Id: isic_isa.c,v 1.3 2001/03/24 12:40:30 martin Exp $
|
|
*
|
|
* last edit-date: [Tue Jan 9 01:43:45 2001]
|
|
*
|
|
* -mh original implementation
|
|
* -hm NetBSD patches from Martin
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/device.h>
|
|
#include <sys/socket.h>
|
|
#include <net/if.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000
|
|
#include <sys/callout.h>
|
|
#endif
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/isa/isavar.h>
|
|
|
|
#ifdef __FreeBSD__
|
|
#include <machine/i4b_ioctl.h>
|
|
#else
|
|
#include <netisdn/i4b_ioctl.h>
|
|
#endif
|
|
|
|
#include "opt_isicisa.h"
|
|
|
|
#include <netisdn/i4b_debug.h>
|
|
#include <netisdn/i4b_ioctl.h>
|
|
#include <netisdn/i4b_trace.h>
|
|
|
|
#include <dev/ic/isic_l1.h>
|
|
#include <dev/ic/ipac.h>
|
|
#include <dev/ic/isac.h>
|
|
#include <dev/ic/hscx.h>
|
|
|
|
#include <netisdn/i4b_l1l2.h>
|
|
#include <netisdn/i4b_mbuf.h>
|
|
#include <netisdn/i4b_global.h>
|
|
|
|
extern const struct isdn_layer1_bri_driver isic_std_driver;
|
|
|
|
#if defined(__OpenBSD__)
|
|
#define __BROKEN_INDIRECT_CONFIG
|
|
#endif
|
|
|
|
/* local functions */
|
|
#ifdef __BROKEN_INDIRECT_CONFIG
|
|
static int isic_isa_probe __P((struct device *, void *, void *));
|
|
#else
|
|
static int isic_isa_probe __P((struct device *, struct cfdata *, void *));
|
|
#endif
|
|
|
|
static void isic_isa_attach __P((struct device *, struct device *, void *));
|
|
static int setup_io_map __P((int flags, bus_space_tag_t iot,
|
|
bus_space_tag_t memt, bus_size_t iobase, bus_size_t maddr,
|
|
int *num_mappings, struct isic_io_map *maps, int *iosize,
|
|
int *msize));
|
|
static void args_unmap __P((int *num_mappings, struct isic_io_map *maps));
|
|
|
|
struct cfattach isic_isa_ca = {
|
|
sizeof(struct l1_softc), isic_isa_probe, isic_isa_attach
|
|
};
|
|
|
|
#define ISIC_FMT "%s: "
|
|
#define ISIC_PARM sc->sc_dev.dv_xname
|
|
#define TERMFMT "\n"
|
|
|
|
/*
|
|
* Probe card
|
|
*/
|
|
static int
|
|
#ifdef __BROKEN_INDIRECT_CONFIG
|
|
isic_isa_probe(parent, match, aux)
|
|
#else
|
|
isic_isa_probe(parent, cf, aux)
|
|
#endif
|
|
struct device *parent;
|
|
#ifdef __BROKEN_INDIRECT_CONFIG
|
|
void *match;
|
|
#else
|
|
struct cfdata *cf;
|
|
#endif
|
|
void *aux;
|
|
{
|
|
#ifdef __BROKEN_INDIRECT_CONFIG
|
|
struct cfdata *cf = ((struct device*)match)->dv_cfdata;
|
|
#endif
|
|
struct isa_attach_args *ia = aux;
|
|
bus_space_tag_t memt = ia->ia_memt, iot = ia->ia_iot;
|
|
int flags = cf->cf_flags;
|
|
struct isic_attach_args args;
|
|
int ret = 0;
|
|
|
|
#if 0
|
|
printf("isic%d: enter isic_isa_probe\n", cf->cf_unit);
|
|
#endif
|
|
|
|
/* check irq */
|
|
if (ia->ia_irq == IRQUNK) {
|
|
printf("isic%d: config error: no IRQ specified\n", cf->cf_unit);
|
|
return 0;
|
|
}
|
|
|
|
/* setup MI attach args */
|
|
bzero(&args, sizeof(args));
|
|
args.ia_flags = flags;
|
|
|
|
/* if card type specified setup io map for that card */
|
|
switch(flags)
|
|
{
|
|
case FLAG_TELES_S0_8:
|
|
case FLAG_TELES_S0_16:
|
|
case FLAG_TELES_S0_163:
|
|
case FLAG_AVM_A1:
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
case FLAG_ITK_IX1:
|
|
if (setup_io_map(flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &ia->ia_msize)) {
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
/* no io map now, will figure card type later */
|
|
break;
|
|
}
|
|
|
|
/* probe card */
|
|
switch(flags)
|
|
{
|
|
#ifdef ISICISA_DYNALINK
|
|
#ifdef __bsdi__
|
|
case FLAG_DYNALINK:
|
|
ret = isic_probe_Dyn(&args);
|
|
break;
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_8
|
|
case FLAG_TELES_S0_8:
|
|
ret = isic_probe_s08(&args);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_16
|
|
case FLAG_TELES_S0_16:
|
|
ret = isic_probe_s016(&args);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
case FLAG_TELES_S0_163:
|
|
ret = isic_probe_s0163(&args);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_AVM_A1
|
|
case FLAG_AVM_A1:
|
|
ret = isic_probe_avma1(&args);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_USR_STI
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
ret = isic_probe_usrtai(&args);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_ITKIX1
|
|
case FLAG_ITK_IX1:
|
|
ret = isic_probe_itkix1(&args);
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
/* No card type given, try to figure ... */
|
|
if (ia->ia_iobase == IOBASEUNK) {
|
|
ret = 0;
|
|
#ifdef ISICISA_TEL_S0_8
|
|
/* only Teles S0/8 will work without IO */
|
|
args.ia_flags = FLAG_TELES_S0_8;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_s08(&args);
|
|
}
|
|
#endif /* ISICISA_TEL_S0_8 */
|
|
} else if (ia->ia_maddr == MADDRUNK) {
|
|
ret = 0;
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
/* no shared memory, only a 16.3 based card,
|
|
AVM A1, the usr sportster or an ITK would work */
|
|
args.ia_flags = FLAG_TELES_S0_163;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_s0163(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_TEL_S0_16_3 */
|
|
#ifdef ISICISA_AVM_A1
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_AVM_A1;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_avma1(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_AVM_A1 */
|
|
#ifdef ISICISA_USR_STI
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_USR_ISDN_TA_INT;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_usrtai(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_USR_STI */
|
|
|
|
#ifdef ISICISA_ITKIX1
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_ITK_IX1;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_itkix1(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_ITKIX1 */
|
|
|
|
} else {
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
/* could be anything */
|
|
args.ia_flags = FLAG_TELES_S0_163;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_s0163(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_TEL_S0_16_3 */
|
|
#ifdef ISICISA_TEL_S0_16
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_TELES_S0_16;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_s016(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_TEL_S0_16 */
|
|
#ifdef ISICISA_AVM_A1
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_AVM_A1;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_avma1(&args);
|
|
if (ret)
|
|
break;
|
|
}
|
|
#endif /* ISICISA_AVM_A1 */
|
|
#ifdef ISICISA_TEL_S0_8
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
args.ia_flags = FLAG_TELES_S0_8;
|
|
if (setup_io_map(args.ia_flags, iot, memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0],
|
|
&(ia->ia_iosize), &(ia->ia_msize)) == 0)
|
|
{
|
|
ret = isic_probe_s08(&args);
|
|
}
|
|
#endif /* ISICISA_TEL_S0_8 */
|
|
}
|
|
break;
|
|
}
|
|
|
|
done:
|
|
/* unmap resources */
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
|
|
#if 0
|
|
printf("isic%d: exit isic_isa_probe, return = %d\n", cf->cf_unit, ret);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
isicattach(int flags, struct l1_softc *sc)
|
|
{
|
|
int ret = 0;
|
|
char *drvid;
|
|
|
|
#ifdef __FreeBSD__
|
|
|
|
struct l1_softc *sc = &l1_sc[dev->id_unit];
|
|
#define PARM dev
|
|
#define PARM2 dev, iobase2
|
|
#define FLAGS dev->id_flags
|
|
|
|
#elif defined(__bsdi__)
|
|
|
|
struct l1_softc *sc = (struct l1_softc *)self;
|
|
#define PARM parent, self, ia
|
|
#define PARM2 parent, self, ia
|
|
#define FLAGS sc->sc_flags
|
|
|
|
#else
|
|
|
|
#define PARM sc
|
|
#define PARM2 sc
|
|
#define FLAGS flags
|
|
|
|
#endif /* __FreeBSD__ */
|
|
|
|
static char *ISACversion[] = {
|
|
"2085 Version A1/A2 or 2086/2186 Version 1.1",
|
|
"2085 Version B1",
|
|
"2085 Version B2",
|
|
"2085 Version V2.3 (B3)",
|
|
"Unknown Version"
|
|
};
|
|
|
|
static char *HSCXversion[] = {
|
|
"82525 Version A1",
|
|
"Unknown (0x01)",
|
|
"82525 Version A2",
|
|
"Unknown (0x03)",
|
|
"82525 Version A3",
|
|
"82525 or 21525 Version 2.1",
|
|
"Unknown Version"
|
|
};
|
|
|
|
/* card dependent setup */
|
|
switch(FLAGS)
|
|
{
|
|
#ifdef ISICISA_DYNALINK
|
|
#if defined(__bsdi__) || defined(__FreeBSD__)
|
|
case FLAG_DYNALINK:
|
|
ret = isic_attach_Dyn(PARM2);
|
|
break;
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_8
|
|
case FLAG_TELES_S0_8:
|
|
ret = isic_attach_s08(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_16
|
|
case FLAG_TELES_S0_16:
|
|
ret = isic_attach_s016(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
case FLAG_TELES_S0_163:
|
|
ret = isic_attach_s0163(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_AVM_A1
|
|
case FLAG_AVM_A1:
|
|
ret = isic_attach_avma1(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_USR_STI
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
ret = isic_attach_usrtai(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_ITKIX1
|
|
case FLAG_ITK_IX1:
|
|
ret = isic_attach_itkix1(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ISICISA_ELSA_PCC16
|
|
case FLAG_ELSA_PCC16:
|
|
ret = isic_attach_Eqs1pi(dev, 0);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef amiga
|
|
case FLAG_BLMASTER:
|
|
ret = 1; /* full detection was done in caller */
|
|
break;
|
|
#endif
|
|
|
|
/* ======================================================================
|
|
* Only P&P cards follow below!!!
|
|
*/
|
|
|
|
#ifdef __FreeBSD__ /* we've already splitted all non-ISA stuff
|
|
out of this ISA specific part for the other
|
|
OS */
|
|
|
|
#ifdef AVM_A1_PCMCIA
|
|
case FLAG_AVM_A1_PCMCIA:
|
|
ret = isic_attach_fritzpcmcia(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef TEL_S0_16_3_P
|
|
case FLAG_TELES_S0_163_PnP:
|
|
ret = isic_attach_s0163P(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CRTX_S0_P
|
|
case FLAG_CREATIX_S0_PnP:
|
|
ret = isic_attach_Cs0P(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef DRN_NGO
|
|
case FLAG_DRN_NGO:
|
|
ret = isic_attach_drnngo(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef SEDLBAUER
|
|
case FLAG_SWS:
|
|
ret = isic_attach_sws(PARM);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ELSA_QS1ISA
|
|
case FLAG_ELSA_QS1P_ISA:
|
|
ret = isic_attach_Eqs1pi(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef AVM_PNP
|
|
case FLAG_AVM_PNP:
|
|
ret = isic_attach_avm_pnp(PARM2);
|
|
ret = 0;
|
|
break;
|
|
#endif
|
|
|
|
#ifdef SIEMENS_ISURF2
|
|
case FLAG_SIEMENS_ISURF2:
|
|
ret = isic_attach_siemens_isurf(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#ifdef ASUSCOM_IPAC
|
|
case FLAG_ASUSCOM_IPAC:
|
|
ret = isic_attach_asi(PARM2);
|
|
break;
|
|
#endif
|
|
|
|
#endif /* __FreeBSD__ / P&P specific part */
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if(ret == 0)
|
|
return(0);
|
|
|
|
if(sc->sc_ipac)
|
|
{
|
|
sc->sc_ipac_version = IPAC_READ(IPAC_ID);
|
|
|
|
switch(sc->sc_ipac_version)
|
|
{
|
|
case IPAC_V11:
|
|
case IPAC_V12:
|
|
break;
|
|
|
|
default:
|
|
printf("isic%d: Error, IPAC version %d unknown!\n",
|
|
sc->sc_unit, ret);
|
|
return(0);
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
sc->sc_isac_version = ((ISAC_READ(I_RBCH)) >> 5) & 0x03;
|
|
|
|
switch(sc->sc_isac_version)
|
|
{
|
|
case ISAC_VA:
|
|
case ISAC_VB1:
|
|
case ISAC_VB2:
|
|
case ISAC_VB3:
|
|
break;
|
|
|
|
default:
|
|
printf(ISIC_FMT "Error, ISAC version %d unknown!\n",
|
|
ISIC_PARM, sc->sc_isac_version);
|
|
return(0);
|
|
break;
|
|
}
|
|
|
|
sc->sc_hscx_version = HSCX_READ(0, H_VSTR) & 0xf;
|
|
|
|
switch(sc->sc_hscx_version)
|
|
{
|
|
case HSCX_VA1:
|
|
case HSCX_VA2:
|
|
case HSCX_VA3:
|
|
case HSCX_V21:
|
|
break;
|
|
|
|
default:
|
|
printf(ISIC_FMT "Error, HSCX version %d unknown!\n",
|
|
ISIC_PARM, sc->sc_hscx_version);
|
|
return(0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* ISAC setup */
|
|
|
|
isic_isac_init(sc);
|
|
|
|
/* HSCX setup */
|
|
|
|
isic_bchannel_setup(sc, HSCX_CH_A, BPROT_NONE, 0);
|
|
|
|
isic_bchannel_setup(sc, HSCX_CH_B, BPROT_NONE, 0);
|
|
|
|
/* setup linktab */
|
|
|
|
isic_init_linktab(sc);
|
|
|
|
/* set trace level */
|
|
|
|
sc->sc_trace = TRACE_OFF;
|
|
|
|
sc->sc_state = ISAC_IDLE;
|
|
|
|
sc->sc_ibuf = NULL;
|
|
sc->sc_ib = NULL;
|
|
sc->sc_ilen = 0;
|
|
|
|
sc->sc_obuf = NULL;
|
|
sc->sc_op = NULL;
|
|
sc->sc_ol = 0;
|
|
sc->sc_freeflag = 0;
|
|
|
|
sc->sc_obuf2 = NULL;
|
|
sc->sc_freeflag2 = 0;
|
|
|
|
#if defined(__FreeBSD__) && __FreeBSD__ >=3
|
|
callout_handle_init(&sc->sc_T3_callout);
|
|
callout_handle_init(&sc->sc_T4_callout);
|
|
#endif
|
|
|
|
#if defined(__NetBSD__) && __NetBSD_Version__ >= 104230000
|
|
callout_init(&sc->sc_T3_callout);
|
|
callout_init(&sc->sc_T4_callout);
|
|
#endif
|
|
|
|
/* init higher protocol layers */
|
|
|
|
sc->sc_l2 = isdn_attach_layer1_bri(sc, sc->sc_dev.dv_xname, "some isic card", &isic_std_driver);
|
|
|
|
/* announce manufacturer and card type */
|
|
|
|
switch(FLAGS)
|
|
{
|
|
case FLAG_TELES_S0_8:
|
|
drvid = "Teles S0/8 or Niccy 1008";
|
|
break;
|
|
|
|
case FLAG_TELES_S0_16:
|
|
drvid = "Teles S0/16, Creatix ISDN S0-16 or Niccy 1016";
|
|
break;
|
|
|
|
case FLAG_TELES_S0_163:
|
|
drvid = "Teles S0/16.3";
|
|
break;
|
|
|
|
case FLAG_AVM_A1:
|
|
drvid = "AVM A1 or AVM Fritz!Card";
|
|
break;
|
|
|
|
case FLAG_AVM_A1_PCMCIA:
|
|
drvid = "AVM PCMCIA Fritz!Card";
|
|
break;
|
|
|
|
case FLAG_TELES_S0_163_PnP:
|
|
drvid = "Teles S0/PnP";
|
|
break;
|
|
|
|
case FLAG_CREATIX_S0_PnP:
|
|
drvid = "Creatix ISDN S0-16 P&P";
|
|
break;
|
|
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
drvid = "USRobotics Sportster ISDN TA intern";
|
|
break;
|
|
|
|
case FLAG_DRN_NGO:
|
|
drvid = "Dr. Neuhaus NICCY Go@";
|
|
break;
|
|
|
|
case FLAG_DYNALINK:
|
|
drvid = "Dynalink IS64PH";
|
|
break;
|
|
|
|
case FLAG_SWS:
|
|
drvid = "Sedlbauer WinSpeed";
|
|
break;
|
|
|
|
case FLAG_BLMASTER:
|
|
/* board announcement was done by caller */
|
|
drvid = (char *)0;
|
|
break;
|
|
|
|
case FLAG_ELSA_QS1P_ISA:
|
|
drvid = "ELSA QuickStep 1000pro (ISA)";
|
|
break;
|
|
|
|
case FLAG_ITK_IX1:
|
|
drvid = "ITK ix1 micro";
|
|
break;
|
|
|
|
case FLAG_ELSA_PCC16:
|
|
drvid = "ELSA PCC-16";
|
|
break;
|
|
|
|
case FLAG_ASUSCOM_IPAC:
|
|
drvid = "Asuscom ISDNlink 128K PnP";
|
|
break;
|
|
|
|
case FLAG_SIEMENS_ISURF2:
|
|
drvid = "Siemens I-Surf 2.0";
|
|
break;
|
|
|
|
default:
|
|
drvid = "ERROR, unknown flag used";
|
|
break;
|
|
}
|
|
#ifndef __FreeBSD__
|
|
printf("\n");
|
|
#endif
|
|
if (drvid)
|
|
printf(ISIC_FMT "%s\n", ISIC_PARM, drvid);
|
|
|
|
/* announce chip versions */
|
|
|
|
if(sc->sc_ipac)
|
|
{
|
|
if(sc->sc_ipac_version == IPAC_V11)
|
|
printf(ISIC_FMT "IPAC PSB2115 Version 1.1\n", ISIC_PARM);
|
|
else
|
|
printf(ISIC_FMT "IPAC PSB2115 Version 1.2\n", ISIC_PARM);
|
|
}
|
|
else
|
|
{
|
|
if(sc->sc_isac_version >= ISAC_UNKN)
|
|
{
|
|
printf(ISIC_FMT "ISAC Version UNKNOWN (VN=0x%x)" TERMFMT,
|
|
ISIC_PARM,
|
|
sc->sc_isac_version);
|
|
sc->sc_isac_version = ISAC_UNKN;
|
|
}
|
|
else
|
|
{
|
|
printf(ISIC_FMT "ISAC %s (IOM-%c)" TERMFMT,
|
|
ISIC_PARM,
|
|
ISACversion[sc->sc_isac_version],
|
|
sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2');
|
|
}
|
|
|
|
#ifdef __FreeBSD__
|
|
printf("(Addr=0x%lx)\n", (u_long)ISAC_BASE);
|
|
#endif
|
|
|
|
if(sc->sc_hscx_version >= HSCX_UNKN)
|
|
{
|
|
printf(ISIC_FMT "HSCX Version UNKNOWN (VN=0x%x)" TERMFMT,
|
|
ISIC_PARM,
|
|
sc->sc_hscx_version);
|
|
sc->sc_hscx_version = HSCX_UNKN;
|
|
}
|
|
else
|
|
{
|
|
printf(ISIC_FMT "HSCX %s" TERMFMT,
|
|
ISIC_PARM,
|
|
HSCXversion[sc->sc_hscx_version]);
|
|
}
|
|
|
|
#ifdef __FreeBSD__
|
|
printf("(AddrA=0x%lx, AddrB=0x%lx)\n", (u_long)HSCX_A_BASE, (u_long)HSCX_B_BASE);
|
|
|
|
#endif /* __FreeBSD__ */
|
|
}
|
|
|
|
#ifdef __FreeBSD__
|
|
next_isic_unit++;
|
|
|
|
#if defined(__FreeBSD_version) && __FreeBSD_version >= 300003
|
|
|
|
/* set the interrupt handler - no need to change isa_device.h */
|
|
dev->id_intr = (inthand2_t *)isicintr;
|
|
|
|
#endif
|
|
|
|
#endif /* __FreeBSD__ */
|
|
|
|
return(1);
|
|
#undef PARM
|
|
#undef FLAGS
|
|
}
|
|
|
|
/*
|
|
* Attach the card
|
|
*/
|
|
static void
|
|
isic_isa_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct l1_softc *sc = (void *)self;
|
|
struct isa_attach_args *ia = aux;
|
|
int flags = sc->sc_dev.dv_cfdata->cf_flags;
|
|
int ret = 0;
|
|
struct isic_attach_args args;
|
|
|
|
/* Setup parameters */
|
|
sc->sc_unit = sc->sc_dev.dv_unit;
|
|
sc->sc_irq = ia->ia_irq;
|
|
sc->sc_maddr = ia->ia_maddr;
|
|
sc->sc_num_mappings = 0;
|
|
sc->sc_maps = NULL;
|
|
switch(flags)
|
|
{
|
|
case FLAG_TELES_S0_8:
|
|
case FLAG_TELES_S0_16:
|
|
case FLAG_TELES_S0_163:
|
|
case FLAG_AVM_A1:
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
setup_io_map(flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&(sc->sc_num_mappings), NULL, NULL, NULL);
|
|
MALLOC_MAPS(sc);
|
|
setup_io_map(flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&(sc->sc_num_mappings), &(sc->sc_maps[0]), NULL, NULL);
|
|
break;
|
|
|
|
default:
|
|
/* No card type given, try to figure ... */
|
|
|
|
/* setup MI attach args */
|
|
bzero(&args, sizeof(args));
|
|
args.ia_flags = flags;
|
|
|
|
/* Probe cards */
|
|
if (ia->ia_iobase == IOBASEUNK) {
|
|
ret = 0;
|
|
#ifdef ISICISA_TEL_S0_8
|
|
/* only Teles S0/8 will work without IO */
|
|
args.ia_flags = FLAG_TELES_S0_8;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_s08(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_TEL_S0_8 */
|
|
} else if (ia->ia_maddr == MADDRUNK) {
|
|
/* no shared memory, only a 16.3 based card,
|
|
AVM A1, the usr sportster or an ITK would work */
|
|
ret = 0;
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
args.ia_flags = FLAG_TELES_S0_163;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_s0163(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_TEL_S0_16_3 */
|
|
#ifdef ISICISA_AVM_A1
|
|
args.ia_flags = FLAG_AVM_A1;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_avma1(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_AVM_A1 */
|
|
#ifdef ISICISA_USR_STI
|
|
args.ia_flags = FLAG_USR_ISDN_TA_INT;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_usrtai(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_USR_STI */
|
|
#ifdef ISICISA_ITKIX1
|
|
args.ia_flags = FLAG_ITK_IX1;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_itkix1(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_ITKIX1 */
|
|
} else {
|
|
/* could be anything */
|
|
ret = 0;
|
|
#ifdef ISICISA_TEL_S0_16_3
|
|
args.ia_flags = FLAG_TELES_S0_163;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_s0163(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_TEL_S0_16_3 */
|
|
#ifdef ISICISA_TEL_S0_16
|
|
args.ia_flags = FLAG_TELES_S0_16;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_s016(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_TEL_S0_16 */
|
|
#ifdef ISICISA_AVM_A1
|
|
args.ia_flags = FLAG_AVM_A1;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_avma1(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_AVM_A1 */
|
|
#ifdef ISICISA_TEL_S0_8
|
|
args.ia_flags = FLAG_TELES_S0_8;
|
|
setup_io_map(args.ia_flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&args.ia_num_mappings, &args.ia_maps[0], NULL, NULL);
|
|
ret = isic_probe_s08(&args);
|
|
if (ret)
|
|
goto found;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
#endif /* ISICISA_TEL_S0_8 */
|
|
}
|
|
break;
|
|
|
|
found:
|
|
flags = args.ia_flags;
|
|
sc->sc_num_mappings = args.ia_num_mappings;
|
|
args_unmap(&args.ia_num_mappings, &args.ia_maps[0]);
|
|
if (ret) {
|
|
MALLOC_MAPS(sc);
|
|
setup_io_map(flags, ia->ia_iot, ia->ia_memt, ia->ia_iobase, ia->ia_maddr,
|
|
&(sc->sc_num_mappings), &(sc->sc_maps[0]), NULL, NULL);
|
|
} else {
|
|
printf(": could not determine card type - not configured!\n");
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
|
|
#if defined(__OpenBSD__)
|
|
isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
|
|
IPL_NET, isicintr, sc, sc->sc_dev.dv_xname);
|
|
|
|
/* MI initialization of card */
|
|
isicattach(flags, sc);
|
|
|
|
#else
|
|
|
|
/* MI initialization of card */
|
|
isicattach(flags, sc);
|
|
|
|
/*
|
|
* Try to get a level-triggered interrupt first. If that doesn't
|
|
* work (like on NetBSD/Atari, try to establish an edge triggered
|
|
* interrupt.
|
|
*/
|
|
if (isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_LEVEL,
|
|
IPL_NET, isicintr, sc) == NULL) {
|
|
if(isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
|
|
IPL_NET, isicintr, sc) == NULL) {
|
|
args_unmap(&(sc->sc_num_mappings), &(sc->sc_maps[0]));
|
|
free((sc)->sc_maps, M_DEVBUF);
|
|
}
|
|
else {
|
|
/*
|
|
* XXX: This is a hack that probably needs to be
|
|
* solved by setting an interrupt type in the sc
|
|
* structure. I don't feel familiar enough with the
|
|
* code to do this currently. Feel free to contact
|
|
* me about it (leo@netbsd.org).
|
|
*/
|
|
isicintr(sc);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Setup card specific io mapping. Return 0 on success,
|
|
* any other value on config error.
|
|
* Be prepared to get NULL as maps array.
|
|
* Make sure to keep *num_mappings in sync with the real
|
|
* mappings already setup when returning!
|
|
*/
|
|
static int
|
|
setup_io_map(flags, iot, memt, iobase, maddr, num_mappings, maps, iosize, msize)
|
|
int flags, *num_mappings, *iosize, *msize;
|
|
bus_size_t iobase, maddr;
|
|
bus_space_tag_t iot, memt;
|
|
struct isic_io_map *maps;
|
|
{
|
|
/* nothing mapped yet */
|
|
*num_mappings = 0;
|
|
|
|
/* which resources do we need? */
|
|
switch(flags)
|
|
{
|
|
case FLAG_TELES_S0_8:
|
|
if (maddr == MADDRUNK) {
|
|
printf("isic: config error: no shared memory specified for Teles S0/8!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 0; /* no i/o ports */
|
|
if (msize) *msize = 0x1000; /* shared memory size */
|
|
|
|
/* this card uses a single memory mapping */
|
|
if (maps == NULL) {
|
|
*num_mappings = 1;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
maps[0].t = memt;
|
|
maps[0].offset = 0;
|
|
maps[0].size = 0x1000;
|
|
if (bus_space_map(maps[0].t, maddr,
|
|
maps[0].size, 0, &maps[0].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
break;
|
|
|
|
case FLAG_TELES_S0_16:
|
|
if (iobase == IOBASEUNK) {
|
|
printf("isic: config error: no i/o address specified for Teles S0/16!\n");
|
|
return 1;
|
|
}
|
|
if (maddr == MADDRUNK) {
|
|
printf("isic: config error: no shared memory specified for Teles S0/16!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 8; /* i/o ports */
|
|
if (msize) *msize = 0x1000; /* shared memory size */
|
|
|
|
/* one io and one memory mapping */
|
|
if (maps == NULL) {
|
|
*num_mappings = 2;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
maps[0].t = iot;
|
|
maps[0].offset = 0;
|
|
maps[0].size = 8;
|
|
if (bus_space_map(maps[0].t, iobase,
|
|
maps[0].size, 0, &maps[0].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
maps[1].t = memt;
|
|
maps[1].offset = 0;
|
|
maps[1].size = 0x1000;
|
|
if (bus_space_map(maps[1].t, maddr,
|
|
maps[1].size, 0, &maps[1].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
break;
|
|
|
|
case FLAG_TELES_S0_163:
|
|
if (iobase == IOBASEUNK) {
|
|
printf("isic: config error: no i/o address specified for Teles S0/16!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 8; /* only some i/o ports shown */
|
|
if (msize) *msize = 0; /* no shared memory */
|
|
|
|
/* Four io mappings: config, isac, 2 * hscx */
|
|
if (maps == NULL) {
|
|
*num_mappings = 4;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
maps[0].t = iot;
|
|
maps[0].offset = 0;
|
|
maps[0].size = 8;
|
|
if (bus_space_map(maps[0].t, iobase,
|
|
maps[0].size, 0, &maps[0].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
maps[1].t = iot;
|
|
maps[1].offset = 0;
|
|
maps[1].size = 0x40; /* XXX - ??? */
|
|
if ((iobase - 0xd80 + 0x980) < 0 || (iobase - 0xd80 + 0x980) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[1].t, iobase - 0xd80 + 0x980,
|
|
maps[1].size, 0, &maps[1].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
maps[2].t = iot;
|
|
maps[2].offset = 0;
|
|
maps[2].size = 0x40; /* XXX - ??? */
|
|
if ((iobase - 0xd80 + 0x180) < 0 || (iobase - 0xd80 + 0x180) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[2].t, iobase - 0xd80 + 0x180,
|
|
maps[2].size, 0, &maps[2].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
maps[3].t = iot;
|
|
maps[3].offset = 0;
|
|
maps[3].size = 0x40; /* XXX - ??? */
|
|
if ((iobase - 0xd80 + 0x580) < 0 || (iobase - 0xd80 + 0x580) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[3].t, iobase - 0xd80 + 0x580,
|
|
maps[3].size, 0, &maps[3].h)) {
|
|
return 1;
|
|
}
|
|
(*num_mappings)++;
|
|
break;
|
|
|
|
case FLAG_AVM_A1:
|
|
if (iobase == IOBASEUNK) {
|
|
printf("isic: config error: no i/o address specified for AVM A1/Fritz! card!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 8; /* only some i/o ports shown */
|
|
if (msize) *msize = 0; /* no shared memory */
|
|
|
|
/* Seven io mappings: config, isac, 2 * hscx,
|
|
isac-fifo, 2 * hscx-fifo */
|
|
if (maps == NULL) {
|
|
*num_mappings = 7;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
maps[0].t = iot; /* config */
|
|
maps[0].offset = 0;
|
|
maps[0].size = 8;
|
|
if ((iobase + 0x1800) < 0 || (iobase + 0x1800) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[0].t, iobase + 0x1800, maps[0].size, 0, &maps[0].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[1].t = iot; /* isac */
|
|
maps[1].offset = 0;
|
|
maps[1].size = 0x80; /* XXX - ??? */
|
|
if ((iobase + 0x1400 - 0x20) < 0 || (iobase + 0x1400 - 0x20) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[1].t, iobase + 0x1400 - 0x20, maps[1].size, 0, &maps[1].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[2].t = iot; /* hscx 0 */
|
|
maps[2].offset = 0;
|
|
maps[2].size = 0x40; /* XXX - ??? */
|
|
if ((iobase + 0x400 - 0x20) < 0 || (iobase + 0x400 - 0x20) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[2].t, iobase + 0x400 - 0x20, maps[2].size, 0, &maps[2].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[3].t = iot; /* hscx 1 */
|
|
maps[3].offset = 0;
|
|
maps[3].size = 0x40; /* XXX - ??? */
|
|
if ((iobase + 0xc00 - 0x20) < 0 || (iobase + 0xc00 - 0x20) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[3].t, iobase + 0xc00 - 0x20, maps[3].size, 0, &maps[3].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[4].t = iot; /* isac-fifo */
|
|
maps[4].offset = 0;
|
|
maps[4].size = 1;
|
|
if ((iobase + 0x1400 - 0x20 -0x3e0) < 0 || (iobase + 0x1400 - 0x20 -0x3e0) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[4].t, iobase + 0x1400 - 0x20 -0x3e0, maps[4].size, 0, &maps[4].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[5].t = iot; /* hscx 0 fifo */
|
|
maps[5].offset = 0;
|
|
maps[5].size = 1;
|
|
if ((iobase + 0x400 - 0x20 -0x3e0) < 0 || (iobase + 0x400 - 0x20 -0x3e0) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[5].t, iobase + 0x400 - 0x20 -0x3e0, maps[5].size, 0, &maps[5].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
maps[6].t = iot; /* hscx 1 fifo */
|
|
maps[6].offset = 0;
|
|
maps[6].size = 1;
|
|
if ((iobase + 0xc00 - 0x20 -0x3e0) < 0 || (iobase + 0xc00 - 0x20 -0x3e0) > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(maps[6].t, iobase + 0xc00 - 0x20 -0x3e0, maps[6].size, 0, &maps[6].h))
|
|
return 1;
|
|
(*num_mappings)++;
|
|
break;
|
|
|
|
case FLAG_USR_ISDN_TA_INT:
|
|
if (iobase == IOBASEUNK) {
|
|
printf("isic: config error: no I/O base specified for USR Sportster TA intern!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 8; /* scattered ports, only some shown */
|
|
if (msize) *msize = 0; /* no shared memory */
|
|
|
|
/* 49 io mappings: 1 config and 48x8 registers */
|
|
if (maps == NULL) {
|
|
*num_mappings = 49;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
{
|
|
int i, num;
|
|
bus_size_t base;
|
|
|
|
/* config at offset 0x8000 */
|
|
base = iobase + 0x8000;
|
|
maps[0].size = 1;
|
|
maps[0].t = iot;
|
|
maps[0].offset = 0;
|
|
if (base < 0 || base > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(iot, base, 1, 0, &maps[0].h)) {
|
|
return 1;
|
|
}
|
|
*num_mappings = num = 1;
|
|
|
|
/* HSCX A at offset 0 */
|
|
base = iobase;
|
|
for (i = 0; i < 16; i++) {
|
|
maps[num].size = 8;
|
|
maps[num].offset = 0;
|
|
maps[num].t = iot;
|
|
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(iot, base+i*1024, 8, 0, &maps[num].h)) {
|
|
return 1;
|
|
}
|
|
*num_mappings = ++num;
|
|
}
|
|
/* HSCX B at offset 0x4000 */
|
|
base = iobase + 0x4000;
|
|
for (i = 0; i < 16; i++) {
|
|
maps[num].size = 8;
|
|
maps[num].offset = 0;
|
|
maps[num].t = iot;
|
|
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(iot, base+i*1024, 8, 0, &maps[num].h)) {
|
|
return 1;
|
|
}
|
|
*num_mappings = ++num;
|
|
}
|
|
/* ISAC at offset 0xc000 */
|
|
base = iobase + 0xc000;
|
|
for (i = 0; i < 16; i++) {
|
|
maps[num].size = 8;
|
|
maps[num].offset = 0;
|
|
maps[num].t = iot;
|
|
if (base+i*1024 < 0 || base+i*1024+8 > 0x0ffff)
|
|
return 1;
|
|
if (bus_space_map(iot, base+i*1024, 8, 0, &maps[num].h)) {
|
|
return 1;
|
|
}
|
|
*num_mappings = ++num;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case FLAG_ITK_IX1:
|
|
if (iobase == IOBASEUNK) {
|
|
printf("isic: config error: no I/O base specified for ITK ix1 micro!\n");
|
|
return 1;
|
|
}
|
|
if (iosize) *iosize = 4;
|
|
if (msize) *msize = 0;
|
|
if (maps == NULL) {
|
|
*num_mappings = 1;
|
|
return 0;
|
|
}
|
|
*num_mappings = 0;
|
|
maps[0].size = 4;
|
|
maps[0].t = iot;
|
|
maps[0].offset = 0;
|
|
if (bus_space_map(iot, iobase, 4, 0, &maps[0].h)) {
|
|
return 1;
|
|
}
|
|
*num_mappings = 1;
|
|
break;
|
|
|
|
default:
|
|
printf("isic: config error: flags do not specify any known card!\n");
|
|
return 1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
args_unmap(num_mappings, maps)
|
|
int *num_mappings;
|
|
struct isic_io_map *maps;
|
|
{
|
|
int i, n;
|
|
for (i = 0, n = *num_mappings; i < n; i++)
|
|
if (maps[i].size)
|
|
bus_space_unmap(maps[i].t, maps[i].h, maps[i].size);
|
|
*num_mappings = 0;
|
|
}
|