NetBSD/sys/arch/newsmips/dev/scsireg.h

315 lines
7.8 KiB
C

/* $NetBSD: scsireg.h,v 1.3 1998/11/19 21:47:21 thorpej Exp $ */
/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Sony Corp. and Kazumasa Utashiro of Software Research Associates, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: $Hdr: scsireg.h,v 4.300 91/06/09 06:38:12 root Rel41 $ SONY
*
* @(#)scsireg.h 8.1 (Berkeley) 6/11/93
*/
/*
* scsireg.h
*/
#ifndef __SCSIREG__
#define __SCSIREG__ 1
/*
* initiator status byte bit image
*/
#define INST_EP 0x80 /* End of Process */
#define INST_WR 0x40 /* Waiting Reselection */
#define INST_IP 0x20 /* In Process */
#define INST_WAIT 0x10 /* Waiting Bus free */
#define INST_LB 0x8 /* Loss of BUSY */
#define INST_TO 0x4 /* Time Out */
#define INST_PRE 0x2 /* PaRameter Error */
#define INST_HE 0x1 /* Hard Error */
#define INSTERMASK 0x7
/*
* target status byte bit image
*/
#define VENDOR 0x61
#define TGSTMASK 0x1e
#define TGST_RSVCFLCT 0x18
#define TGST_INTERMED 0x10
#define TGST_BUSY 0x8
#define TGST_CC 0x2
#define TGST_GOOD 0x0
#define TS_MAPPED_PIO 0x01 /* program I/O with map */
#define TS_CONTR_ON 0x02 /* contiguous transfer on */
#define TS_CONTR_OFF 0x04 /* contiguous transfer off */
#define TS_BYTE_DMA 0x08 /* DMA transfer(byte access) */
#define TS_LONG_DMA 0x10 /* DMA transfer(long access) */
/*
* message byte
*/
#define MSG_IDENT 0x80
#define MSG_RESELEN 0x40
#define MSG_CCOMP 0
#define MSG_EXTND 1
#define MSG_SDP 2
#define MSG_RDP 3
#define MSG_DCNT 4
#define MSG_IDE 5
/*#define MSG_ABORT 6*/
#define MSG_MREJ 7
#define MSG_NOP 8
#define MSG_PERROR 9
/*
* message identify byte bit image
*/
#define IDT_DISCON 0x40
#define IDT_DRMASK 0x7
/*
* scsi command opcodes
*/
#define SCOP_TST 0x00
#define SCOP_REZERO 0x01
#define SCOP_REWIND 0x01
#define SCOP_RSENSE 0x03
#define SCOP_FMT 0x04
#define SCOP_RBLIM 0x05
#define SCOP_SPARAM 0x06
#define SCOP_RASBLK 0x07
#define SCOP_READ 0x08
#define SCOP_MOERASE 0x09
#define SCOP_WRITE 0x0a
#define SCOP_SEEK 0x0b
#define SCOP_MERASE 0x0e
#define SCOP_WFMARK 0x10
#define SCOP_SPACE 0x11
#define SCOP_INQUIRY 0x12
#define SCOP_SVERIFY 0x13
#define SCOP_RBDATA 0x14
#define SCOP_MSELECT 0x15
#define SCOP_ERASE 0x19
#define SCOP_MSENSE 0x1a
#define SCOP_STST 0x1b
#define SCOP_LOAD 0x1b
#define SCOP_RECDIAG 0x1c
#define SCOP_SNDDIAG 0x1d
#define SCOP_MEDRMV 0x1e
#define SCOP_RCAP 0x25
#define SCOP_EREAD 0x28
#define SCOP_EWRITE 0x2a
#define SCOP_BSSRCH 0x2c
#define SCOP_WSSRCH 0x2d
#define SCOP_WRTVRFY 0x2e
#define SCOP_VERIFY 0x2f
#define SCOP_RDL 0x37
#define SCOP_WBUF 0x3b
#define SCOP_RBUF 0x3c
#define SCOP_EJECT 0xc0
#define SCOP_EESENSE 0xc1
#define SCOP_READTOC 0xc1
#define SCOP_READID 0xc2
#define SCOP_ADP 0xc2
#define SCOP_READQ 0xc2
#define SCOP_BLANKS 0xc3
#define SCOP_READHEAD 0xc3
#define SCOP_PBSTS 0xc4
#define SCOP_RCVDISK 0xc4
#define SCOP_PAUSE 0xc5
#define SCOP_PLAYTRACK 0xc6
#define SCOP_PLAYMSF 0xc7
#define SCOP_PLAYAUDIO 0xc8
#define SCOP_ERASED 0xe7
#define SCOP_RESET 0xff
#ifdef CPU_DOUBLE
# ifdef mips
# define ipc_phys(x) (caddr_t)K0_TT0(x)
# else
# define ipc_phys(x) (caddr_t)((int)(x) & ~0x80000000)
# endif
# ifdef news3800
# define splsc spl4
# define splscon spl3
# endif
#endif /* CPU_DOUBLE */
#ifdef CPU_SINGLE
# define ipc_phys(x) (caddr_t)(x)
# ifdef news3400
# define splsc cpu_spl0 /* Lite2 used spl3 */
# define splscon spl2 XXX not used
extern int cpu_spl0 __P((void));
# else
# define splsc spl4
# define splscon spl3
# endif
#endif /* CPU_SINGLE */
#define SCSI_INTEN 1
#define SCSI_INTDIS 0
/*
* other definition
*/
#define ON 1
#define OFF 0
/*
* scsi map table format
*/
#if defined(news3400)
#define NSCMAP 120
#endif
#if defined(news3800)
#define NSCMAP 129
#endif
struct sc_map {
u_int mp_offset;
u_int mp_pages;
u_int mp_addr[NSCMAP]; /* page number */
};
struct sc_chan_stat {
struct sc_chan_stat *wb_next; /* wait bus channel queue */
struct sc_scb *scb; /* scsi struct address */
u_int stcnt; /* save transfer count */
u_char *spoint; /* save transfer point */
u_int stag; /* save tag register */
u_int soffset; /* save offset register */
int chan_num; /* channel NO. */
u_char comflg; /* flag for save comand pointer */
u_char intr_flg; /* interrupt flag. SCSI_INTEN/INTDIS */
};
struct sc_scb {
TAILQ_ENTRY(sc_scb) chain;
struct scsipi_xfer *xs;
int flags;
struct sc_softc *scb_softc;
struct sc_map *sc_map;
u_char *sc_cpoint; /* pointer to buffer address */
u_int sc_ctrnscnt; /* transfer count */
u_int sc_ctag;
u_int sc_coffset;
u_char istatus;
u_char tstatus;
u_char identify;
u_char message;
u_char msgbuf[20];
};
#define NTARGET 8
struct sc_softc {
struct device sc_dev;
struct scsipi_link sc_link;
struct scsipi_adapter sc_adapter;
TAILQ_HEAD(scb_list, sc_scb) ready_list, free_list;
struct sc_scb sc_scb[3*NTARGET];
int inuse[NTARGET];
struct sc_map sc_map[NTARGET];
struct sc_chan_stat chan_stat[NTARGET]; /* SCSI channel status */
int sel_stat[NTARGET]; /* target select status */
int scsi_1185AQ;
int pad_start;
int wbc; /* # of channel that is waiting for scsi bus free */
int wrc; /* # of channel that is waiting for reselection */
struct sc_chan_stat *ip;
/* In progress channel. Same as ISTAT.IP */
int ipc; /* number of in progress channel. */
int dma_stat; /* OFF = DMAC is not used */
#define SC_DMAC_RD 1
#define SC_DMAC_WR 2
struct sc_chan_stat *wbq_actf; /* forword active pointer */
struct sc_chan_stat *wbq_actl; /* last active pointer */
u_char *act_cmd_pointer;
u_char *min_point[NTARGET];
int pad_cnt[NTARGET];
char min_cnt[NTARGET];
char sync_tr[NTARGET]; /* sync/async flag */
char mout_flag[NTARGET];
char perr_flag[NTARGET];
int int_stat1;
int int_stat2;
int min_flag;
int lastcmd;
};
/*
* sel_stat values
*/
#define SEL_WAIT 0
#define SEL_START 1
#define SEL_TIMEOUT 2
#define SEL_ARBF 3
#define SEL_SUCCESS 4
#define SEL_RSLD 5
#define SEL_RSL_WAIT 6
/*
* mout_flag values
*/
#define MOUT_IDENTIFY 1
#define MOUT_SYNC_TR 2
struct scintsw {
/*00*/ int (*sci_inthandler)(); /* pointer to interrupt handler */
/*04*/ int sci_ctlr; /* controller number */
/*08*/
};
#endif /* !__SCSIREG__ */