NetBSD/sys/arch/netwinder/conf/GENERIC

249 lines
7.8 KiB
Plaintext

# $NetBSD: GENERIC,v 1.15 2002/03/10 19:56:44 lukem Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/netwinder/conf/std.netwinder"
# estimated number of users
maxusers 32
# Standard system options
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
#options NTP # NTP phase/frequency locked loop
# CPU options
# For StrongARM systems
options CPU_SA110 # Support the SA110 core
makeoptions COPTS="-O2 -march=armv4 -mtune=strongarm"
# Architecture options
options FOOTBRIDGE # We have DC21285 'Footbridge' core logic
options NETWINDER # We are a NETWINDER
# FPA options
#options ARMFPE # ARM Ltd FPE
# File systems
file-system FFS # UFS
#file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network file system
#file-system ADOSFS # AmigaDOS-compatible file system
file-system EXT2FS # second extended file system (linux)
#file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
#file-system FDESC # /dev/fd
#file-system KERNFS # /kern
file-system NULLFS # loopback file system
#file-system PORTAL # portal filesystem (still experimental)
#file-system PROCFS # /proc
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
# File system options
#options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independant support
options NFSSERVER
options SOFTDEP
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
#options NS # XNS
#options NSIP # XNS tunneling over IP
#options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
#options CCITT,LLC,HDLC # X.25
#options NETATALK # AppleTalk networking
#options PFIL_HOOKS # pfil(9) packet filter hooks
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
#options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
options NFS_BOOT_BOOTP
options NFS_BOOT_DHCP
#options NFS_BOOT_BOOTPARAM
# Compatibility options
#options COMPAT_43 # 4.3BSD compatibility.
options COMPAT_15 # NetBSD 1.5 compatibility.
options COMPAT_14 # NetBSD 1.4 compatibility.
#options COMPAT_13 # NetBSD 1.3 compatibility.
#options COMPAT_12 # NetBSD 1.2 compatibility.
#options COMPAT_11 # NetBSD 1.1 compatibility.
#options COMPAT_10 # NetBSD 1.0 compatibility.
#options COMPAT_09 # NetBSD 0.9 compatibility.
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
# Shared memory options
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
options SHMMAXPGS=1024 # 1024 pages is the default
# Device options
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
#options MEMORY_DISK_SIZE=3400 # Size in blocks
#options MEMORY_DISK_IS_ROOT # use memory disk as root
# Miscellaneous kernel options
options KTRACE # system call tracing, a la ktrace(1)
options IRQSTATS # manage IRQ statistics
#options LKM # loadable kernel modules
#options KMEMSTATS # kernel memory statistics
#options SCSIVERBOSE # Verbose SCSI errors
options PCIVERBOSE # Verbose PCI descriptions
options MIIVERBOSE # Verbose MII autoconfuration messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options DDB_KEYCODE=0x40
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
# Development and Debugging options
#options ARM700BUGTRACK # track the ARM700 swi bug
#options PORTMASTER # Enable PortMaster only options
options DIAGNOSTIC # internally consistency checks
#options PMAP_DEBUG # Enable pmap_debug_level code
#options IPKDB # remote kernel debugging
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#makeoptions DEBUG="-g" # compile full symbol table
config netbsd root on ? type ?
# The main bus device
mainbus0 at root
# The boot cpu
cpu0 at mainbus?
# Core logic
footbridge0 at mainbus?
# footbridge uart
#fcom0 at footbridge?
# system clock via footbridge
#clock* at footbridge?
# time-of-day device via footbridge
todclock0 at footbridge?
# PCI bus via footbridge
pci0 at footbridge? # PCI bus
# ISA bus support
pcib* at pci? dev ? function ? # ISA bridge
isa* at pcib?
# PCI IDE Controllers and Devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at pciide? channel ? drive ? flags 0x0000 # the drives themselves
# PCI network interfaces
ne* at pci? dev ? function ? # NE2000 compat ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
options TLP_MATCH_21142
# MII/PHY support
icsphy* at mii? phy ? # ISC-189x PHYs
ukphy* at mii? phy ? # generic unknown PHYs
# WSCONS Support
options WSEMUL_VT100 # VT100 / VT220 emulation
options WS_KERNEL_FG=WSCOL_GREEN
pckbc0 at isa?
pckbd* at pckbc?
wskbd* at pckbd? console ?
pms* at pckbc?
wsmouse* at pms? mux 0
pmsi* at pckbc?
wsmouse* at pmsi? mux 0
vga* at pci? dev ? function ?
wsdisplay* at vga? console ?
# ISA Devices
com0 at isa? port 0x3f8 irq 4
lpt0 at isa? port 0x378 irq 7
# Audio Devices
# ISA audio devices
sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster
opl* at sb?
mpu* at sb?
midi* at sb? # SB1 MIDI port
# Audio support
audio* at sb?
# Pseudo-Devices
# disk/mass storage pseudo-devices
#pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 4 # Berkeley packet filter
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device bridge # simple inter-network bridging
pseudo-device loop # network loopback
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device rnd # /dev/random and in-kernel generator