Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/hpcarm/dev/uda1341.c

473 lines
12 KiB
C
Raw Blame History

/* $NetBSD: uda1341.c,v 1.6 2005/06/30 17:03:53 drochner Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Ichiro FUKUHARA (ichiro@ichiro.org).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: uda1341.c,v 1.6 2005/06/30 17:03:53 drochner Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/device.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <hpcarm/dev/ipaq_saipvar.h>
#include <hpcarm/dev/ipaq_gpioreg.h>
#include <hpcarm/dev/uda1341.h>
#include <hpcarm/sa11x0/sa11x0_gpioreg.h>
#include <hpcarm/sa11x0/sa11x0_sspreg.h>
struct uda1341_softc {
struct device sc_dev;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
struct ipaq_softc *sc_parent;
};
static int uda1341_match(struct device *, struct cfdata *, void *);
static void uda1341_attach(struct device *, struct device *, void *);
static int uda1341_print(void *, const char *);
static int uda1341_search(struct device *, struct cfdata *,
const locdesc_t *, void *);
static void uda1341_output_high(struct uda1341_softc *);
static void uda1341_output_low(struct uda1341_softc *);
static void uda1341_L3_init(struct uda1341_softc *);
static void uda1341_init(struct uda1341_softc *);
static void uda1341_reset(struct uda1341_softc *);
static void uda1341_reginit(struct uda1341_softc *);
static int L3_getbit(struct uda1341_softc *);
static void L3_sendbit(struct uda1341_softc *, int);
static u_int8_t L3_getbyte(struct uda1341_softc *, int);
static void L3_sendbyte(struct uda1341_softc *, u_int8_t, int);
static int L3_read(struct uda1341_softc *, u_int8_t, u_int8_t *, int);
static int L3_write(struct uda1341_softc *, u_int8_t, u_int8_t *, int);
CFATTACH_DECL(uda, sizeof(struct uda1341_softc),
uda1341_match, uda1341_attach, NULL, NULL);
/*
* Philips L3 bus support.
* GPIO lines are used for clock, data and mode pins.
*/
#define L3_DATA GPIO_H3600_L3_DATA
#define L3_MODE GPIO_H3600_L3_MODE
#define L3_CLK GPIO_H3600_L3_CLK
static struct {
u_int8_t data0; /* direct addressing register */
} DIRECT_REG = {0};
static struct {
u_int8_t data0; /* extended addressing register 1 */
u_int8_t data1; /* extended addressing register 2 */
} EXTEND_REG = {0, 0};
/*
* register space access macros
*/
#define GPIO_WRITE(sc, reg, val) \
bus_space_write_4(sc->sc_iot, sc->sc_parent->sc_gpioh, reg, val)
#define GPIO_READ(sc, reg) \
bus_space_read_4(sc->sc_iot, sc->sc_parent->sc_gpioh, reg)
#define EGPIO_WRITE(sc) \
bus_space_write_2(sc->sc_iot, sc->sc_parent->sc_egpioh, \
0, sc->sc_parent->ipaq_egpio)
#define SSP_WRITE(sc, reg, val) \
bus_space_write_4(sc->sc_iot, sc->sc_parent->sc_ssph, reg, val)
static int
uda1341_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
return (1);
}
static void
uda1341_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
struct uda1341_softc *sc = (struct uda1341_softc *)self;
struct ipaq_softc *psc = (struct ipaq_softc *)parent;
printf("\n");
printf("%s: UDA1341 CODEC\n", sc->sc_dev.dv_xname);
sc->sc_iot = psc->sc_iot;
sc->sc_ioh = psc->sc_ioh;
sc->sc_parent = (struct ipaq_softc *)parent;
uda1341_L3_init(sc);
uda1341_init(sc);
uda1341_reset(sc);
uda1341_reginit(sc);
/*
* Attach each devices
*/
config_search_ia(uda1341_search, self, "udaif", NULL);
}
static int
uda1341_search(parent, cf, ldesc, aux)
struct device *parent;
struct cfdata *cf;
const locdesc_t *ldesc;
void *aux;
{
if (config_match(parent, cf, NULL) > 0)
config_attach(parent, cf, NULL, uda1341_print);
return 0;
}
static int
uda1341_print(aux, name)
void *aux;
const char *name;
{
return (UNCONF);
}
static void
uda1341_output_high(sc)
struct uda1341_softc *sc;
{
int cr;
GPIO_WRITE(sc, SAGPIO_PSR, (L3_DATA | L3_MODE | L3_CLK));
cr = GPIO_READ(sc, SAGPIO_PDR) | (L3_DATA | L3_MODE | L3_CLK);
GPIO_WRITE(sc, SAGPIO_PDR, cr);
}
static void
uda1341_output_low(sc)
struct uda1341_softc *sc;
{
int cr;
cr = GPIO_READ(sc, SAGPIO_PDR);
cr &= ~(L3_DATA | L3_MODE | L3_CLK);
GPIO_WRITE(sc, SAGPIO_PDR, cr);
}
static void
uda1341_L3_init(sc)
struct uda1341_softc *sc;
{
int cr;
cr = GPIO_READ(sc, SAGPIO_AFR);
cr &= ~(L3_DATA | L3_MODE | L3_CLK);
GPIO_WRITE(sc, SAGPIO_AFR, cr);
uda1341_output_low(sc);
}
static void
uda1341_init(sc)
struct uda1341_softc *sc;
{
int cr;
/* GPIO initialize */
cr = GPIO_READ(sc, SAGPIO_AFR);
cr &= ~(GPIO_ALT_SSP_TXD | GPIO_ALT_SSP_RXD | GPIO_ALT_SSP_SCLK |
GPIO_ALT_SSP_SFRM);
cr |= GPIO_ALT_SSP_CLK;
GPIO_WRITE(sc, SAGPIO_AFR, cr);
cr = GPIO_READ(sc, SAGPIO_PDR);
cr &= ~GPIO_ALT_SSP_CLK;
GPIO_WRITE(sc, SAGPIO_PDR, cr);
/* SSP initialize & enable */
SSP_WRITE(sc, SASSP_CR1, CR1_ECS);
cr = 0xF | (CR0_FRF_MASK & (1<<4)) | (CR0_SCR_MASK & (3<<8)) | CR0_SSE;
SSP_WRITE(sc, SASSP_CR0, cr);
/* Enable the audio power */
sc->sc_parent->ipaq_egpio |=
(EGPIO_H3600_AUD_PWRON | EGPIO_H3600_AUD_ON);
sc->sc_parent->ipaq_egpio &=
~(EGPIO_H3600_CODEC_RESET | EGPIO_H3600_QMUTE);
EGPIO_WRITE(sc);
/* external clock configured for 44100 samples/sec */
cr = GPIO_READ(sc, SAGPIO_PDR);
cr |= (GPIO_H3600_CLK_SET0 | GPIO_H3600_CLK_SET1);
GPIO_WRITE(sc, SAGPIO_PDR, cr);
GPIO_WRITE(sc, SAGPIO_PSR, GPIO_H3600_CLK_SET0);
GPIO_WRITE(sc, SAGPIO_PCR, GPIO_H3600_CLK_SET1);
/* wait for power on */
delay(100*1000);
sc->sc_parent->ipaq_egpio |= EGPIO_H3600_CODEC_RESET;
EGPIO_WRITE(sc);
/* Wait for the UDA1341 to wake up */
delay(100*1000);
}
static void
uda1341_reset(sc)
struct uda1341_softc *sc;
{
u_int8_t command;
command = (L3_ADDRESS_COM << 2) | L3_ADDRESS_STATUS;
DIRECT_REG.data0 = STATUS0_RST | STATUS0_SC_256 | STATUS0_IF_LSB16;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
sc->sc_parent->ipaq_egpio &= ~EGPIO_H3600_CODEC_RESET;
EGPIO_WRITE(sc);
sc->sc_parent->ipaq_egpio |= EGPIO_H3600_CODEC_RESET;
EGPIO_WRITE(sc);
DIRECT_REG.data0 &= ~STATUS0_RST;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
}
static void
uda1341_reginit(sc)
struct uda1341_softc *sc;
{
u_int8_t command;
/* STATUS 0 */
command = (L3_ADDRESS_COM << 2) | L3_ADDRESS_STATUS;
DIRECT_REG.data0 = STATUS0_SC_256 | STATUS0_IF_LSB16;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
/* STATUS 1 */
DIRECT_REG.data0 = STATUS1_OGS | STATUS1_IGS | (1<<7);
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
/* DATA 0 */
command = (L3_ADDRESS_COM << 2) | L3_ADDRESS_DATA0;
DIRECT_REG.data0 = DATA0_VC(100) | DATA0_COMMON;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
/* DATA 1 */
DIRECT_REG.data0 = DATA1_BB(0) | DATA1_TR(0) | DATA1_COMMON;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
/* DATA 2*/
DIRECT_REG.data0 = DATA2_PP | DATA2_COMMON;
L3_write(sc, command, (u_int8_t *) &DIRECT_REG, 1);
/* Extended DATA 0 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E0;
EXTEND_REG.data1 = EXT_DATA_COMMN | 0x4 ;
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
/* Extended DATA 1 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E1;
EXTEND_REG.data1 = EXT_DATA_COMMN | 0x4 ;
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
/* Extended DATA 2 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E2;
EXTEND_REG.data1 = EXT_DATA_COMMN | DATA_E2_MS(30);
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
/* Extended DATA 3 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E3;
EXTEND_REG.data1 = EXT_DATA_COMMN | DATA_E3_IG_L(0);
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
/* Extended DATA 4 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E4;
EXTEND_REG.data1 = EXT_DATA_COMMN | DATA_E4_IG_H(0);
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
/* Extended DATA 5 */
EXTEND_REG.data0 = EXT_ADDR_COMMON | EXT_ADDR_E5;
EXTEND_REG.data1 = EXT_DATA_COMMN;
L3_write(sc, command, (u_int8_t *) &EXTEND_REG, 2);
}
static int
L3_getbit(sc)
struct uda1341_softc *sc;
{
int cr, data;
GPIO_WRITE(sc, SAGPIO_PCR, L3_CLK); /* Clock down */
delay(L3_CLK_LOW);
cr = GPIO_READ(sc, SAGPIO_PLR);
data = (cr & L3_DATA) ? 1 : 0;
GPIO_WRITE(sc, SAGPIO_PSR, L3_CLK); /* Clock up */
delay(L3_CLK_HIGH);
return (data);
}
static void
L3_sendbit(sc, bit)
struct uda1341_softc *sc;
int bit;
{
GPIO_WRITE(sc, SAGPIO_PCR, L3_CLK); /* Clock down */
if (bit & 0x01)
GPIO_WRITE(sc, SAGPIO_PSR, L3_DATA);
else
GPIO_WRITE(sc, SAGPIO_PCR, L3_DATA);
delay(L3_CLK_LOW);
GPIO_WRITE(sc, SAGPIO_PSR, L3_CLK); /* Clock up */
delay(L3_CLK_HIGH);
}
static u_int8_t
L3_getbyte(sc, mode)
struct uda1341_softc *sc;
int mode;
{
int i;
u_int8_t data;
switch (mode) {
case 0: /* Address mode */
case 1: /* First data byte */
break;
default: /* second data byte via halt-Time */
GPIO_WRITE(sc, SAGPIO_PCR, L3_CLK); /* Clock down */
delay(L3_HALT);
GPIO_WRITE(sc, SAGPIO_PSR, L3_CLK); /* Clock up */
break;
}
delay(L3_MODE_SETUP);
for (i = 0; i < 8; i++)
data |= (L3_getbit(sc) << i);
delay(L3_MODE_HOLD);
return (data);
}
static void
L3_sendbyte(sc, data, mode)
struct uda1341_softc *sc;
u_int8_t data;
int mode;
{
int i;
switch (mode) {
case 0: /* Address mode */
GPIO_WRITE(sc, SAGPIO_PCR, L3_CLK); /* Clock down */
break;
case 1: /* First data byte */
break;
default: /* second data byte via halt-Time */
GPIO_WRITE(sc, SAGPIO_PCR, L3_CLK); /* Clock down */
delay(L3_HALT);
GPIO_WRITE(sc, SAGPIO_PSR, L3_CLK); /* Clock up */
break;
}
delay(L3_MODE_SETUP);
for (i = 0; i < 8; i++)
L3_sendbit(sc, data >> i);
if (mode == 0) /* Address mode */
GPIO_WRITE(sc, SAGPIO_PSR, L3_CLK); /* Clock up */
delay(L3_MODE_HOLD);
}
static int
L3_read(sc, addr, data, len)
struct uda1341_softc *sc;
u_int8_t addr, *data;
int len;
{
int cr, mode;
mode = 0;
uda1341_output_high(sc);
L3_sendbyte(sc, addr, mode++);
cr = GPIO_READ(sc, SAGPIO_PDR);
cr &= ~(L3_DATA);
GPIO_WRITE(sc, SAGPIO_PDR, cr);
while(len--)
*data++ = L3_getbyte(sc, mode++);
uda1341_output_low(sc);
return len;
}
static int
L3_write(sc, addr, data, len)
struct uda1341_softc *sc;
u_int8_t addr, *data;
int len;
{
int mode = 0;
uda1341_output_high(sc);
L3_sendbyte(sc, addr, mode++);
while(len--)
L3_sendbyte(sc, *data++, mode++);
uda1341_output_low(sc);
return len;
}
Reference in New Issue View Git Blame Copy Permalink