NetBSD/libexec/ftpd/ftpd.conf.5

417 lines
9.7 KiB
Groff

.\" $NetBSD: ftpd.conf.5,v 1.8 2000/01/12 22:39:29 lukem Exp $
.\"
.\" Copyright (c) 1997-2000 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This code is derived from software contributed to The NetBSD Foundation
.\" by Luke Mewburn.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the NetBSD
.\" Foundation, Inc. and its contributors.
.\" 4. Neither the name of The NetBSD Foundation nor the names of its
.\" contributors may be used to endorse or promote products derived
.\" from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd January 11, 2000
.Dt FTPD.CONF 5
.Os
.Sh NAME
.Nm ftpd.conf
.Nd
.Xr ftpd 8
configuration file
.Sh DESCRIPTION
The
.Nm
file specifies various configuration options for
.Xr ftpd 8
that apply once a user has authenticated their connection.
.Pp
Each authenticated user is a member of a
.Sy class ,
which is determined by
.Xr ftpusers 5 .
.Sy class
is used to determine which
.Nm
entries apply to the user.
The following special classes exist when parsing entries in
.Nm "" :
.Bl -tag -width "chroot" -compact -offset indent
.It Sy all
Matches any class.
.It Sy none
Matches no class.
.El
.Pp
.Nm
consists of a series of lines, each of which may contain a
configuration directive, a comment, or a blank line.
Directives that appear later in the file override settings by previous
directives.
This allows
.Sq wildcard
entries to define defaults, and then have class-specific overrides.
.Pp
A
.Dq \e
is the escape character; it can be used to escape the meaning of the
comment character, or if it is the last character on a line, extends
a configuration directive across multiple lines.
A
.Dq #
is the comment character, and all characters from it to the end of
line are ignored (unless it is escaped with the escape character).
.Pp
The
.Xr ftpd 8
.Sy STAT
command will return the class settings for the current user as defined by
.Nm "" .
.Pp
Each configuration line may be one of:
.Bl -tag -width 4n
.It Sy checkportcmd Ar class Op Sy off
Check the
PORT
command for validity.
The
PORT
command will fail if the IP address specified does not match the
.Tn FTP
command connection, or if the remote TCP port number is less than
.Dv IPPORT_RESERVED .
It is
.Em strongly
encouraged that this option be used, espcially for sites concerned
with potential security problems with
.Tn FTP
bounce attacks.
If
.Ar class
is
.Dq none
or
.Sy off
is given, disable this feature, otherwise enable it.
.It Sy classtype Ar class Ar type
Set the class type of
.Ar class
to
.Ar type .
.Ar type
may be one of:
.Bl -tag -width "CHROOT" -offset indent
.It Sy GUEST
Guests (as per the
.Dq anonymous
and
.Dq ftp
logins).
A
.Xr chroot 2
is performed after login.
.It Sy CHROOT
.Xr chroot 2 ed
users (as per
.Xr ftpchroot 5 ) .
A
.Xr chroot 2
is performed after login.
.It Sy REAL
Normal users.
.El
.It Xo Sy conversion Ar class
.Ar suffix Op Ar "type disable command"
.Xc
Define an automatic in-line file conversion.
If a file to retrieve ends in
.Ar suffix ,
and a real file (sans
.Ar suffix )
exists, then the output of
.Ar command
is returned instead of the contents of the file.
.Pp
.Bl -tag -width "disable" -offset indent
.It Ar suffix
The suffix to initiate the conversion.
.It Ar type
A list of valid filetypes for the conversion.
Valid types are:
.Sq f
(file), and
.Sq d
(directory).
.It Ar disable
The name of file that will prevent conversion if it exists.
A filename of
.Dq Pa \&.
will prevent this disabling action
(i.e., the conversion is always permitted.)
.It Ar command
The command to run for the conversion.
The first word should be the full path name
of the command, as
.Xr execv 3
is used to execute the command.
All instances of the word
.Dq %s
in
.Ar command
are replaced with the requested file (sans
.Ar suffix ) .
.El
.Pp
Conversion directives specified later in the file override earlier
conversions with the same suffix.
.It Sy display Ar class Op Ar file
If
.Ar file
is not given or
.Ar class
is
.Dq none ,
disable this.
Otherwise, each time the user enters a new directory, check if
.Ar file
exists, and if so, display its contents to the user.
Escape sequences are supported; refer to
.Sx Display file escape sequences
in
.Xr ftpd 8
for more information.
.It Xo Sy limit Ar class
.Ar count Op Ar file
.Xc
Limit the maximum number of concurrent connections for
.Ar class
to
.Ar count ,
with
.Sq 0
meaning unlimited connections.
If the limit is exceeded and
.Ar file
is given, display its contents to the user.
Ignored if
.Ar class
is
.Dq none
or
.Ar count
is not specified.
.It Sy maxtimeout Ar class Ar time
Set the maximum timeout period that a client may request,
defaulting to two hours.
This cannot be less than 30 seconds, or the value for
.Sy timeout .
Ignored if
.Ar class
is
.Dq none
or
.Ar time
is not specified.
.It Sy modify Ar class Op Sy off
If
.Ar class
is
.Dq none
or
.Sy off
is given, disable the following commands:
CHMOD, DELE, MKD, RMD, RNFR, and UMASK.
Otherwise, enable them.
.It Sy motd Ar class Op Ar file
If
.Ar file
is not given or
.Ar class
is
.Dq none ,
disable this.
Otherwise, use
.Ar file
as the message of the day file to display after login.
Escape sequences are supported; refer to
.Sx Display file escape sequences
in
.Xr ftpd 8
for more information.
.It Sy notify Ar class Op Ar fileglob
If
.Ar fileglob
is not given or
.Ar class
is
.Dq none ,
disable this.
Otherwise, each time the user enters a new directory,
notify the user of any files matching
.Ar fileglob .
.It Sy passive Ar class Op Sy off
If
.Ar class
is
.Dq none
or
.Sy off
is given, disallow passive (PASV/LPSV/EPSV) connections.
Otherwise, enable them.
.It Sy portrange Ar class Ar min Ar max
Set the range of port number which will be used for the passive data port.
.Ar max
must be greater than
.Ar min ,
and both numbers must be be between
.Dv IPPORT_RESERVED
(1024) and
.Dv IPPORT_ANONMAX
(65535).
.It Sy rateget Ar class Ar rate
Set the maximum get (RETR) transfer rate throttle for
.Ar class
to
.Ar rate .
If
.Ar rate
is 0, the throttle is disabled.
.Pp
An optional suffix may be provided, which changes the intrepretation of
.Ar rate
as follows:
.Bl -tag -width 3n -offset indent -compact
.It b
Causes no modification. (Optional)
.It k
Kilo; multiply the argument by 1024
.It m
Mega; multiply the argument by 1048576
.It g
Giga; multiply the argument by 1073741824
.El
.It Sy rateput Ar class Ar rate
Set the maximum put (STOR) transfer rate throttle for
.Ar class
to
.Ar rate ,
which is parsed as per
.Sy rateget Ar rate .
.It Sy template Ar class Op Ar refclass
Define
.Ar refclass
as the
.Sq template
for
.Ar class ;
any reference to
.Ar refclass
in following directives will also apply to members of
.Ar class .
This is useful to define a template class so that other classes which are
to share common attributes can be easily defined without unnecessary
duplication.
There can be only one template defined at a time.
If
.Ar refclass
is not given, disable the template for
.Ar class .
.It Sy timeout Ar class Ar time
Set the inactivity timeout period.
(the default is fifteen minutes).
This cannot be less than 30 seconds, or greater than the value for
.Sy maxtimeout .
Ignored if
.Ar class
is
.Dq none
or
.Ar time
is not specified.
.It Sy umask Ar class Ar umaskval
Set the umask to
.Ar umaskval .
Ignored if
.Ar class
is
.Dq none
or
.Ar umaskval
is not specified.
.It Sy upload Ar class Op Sy off
If
.Ar class
is
.Dq none
or
.Sy off
is given, disable the following commands:
APPE, STOR, and STOU,
as well as the modify commands:
CHMOD, DELE, MKD, RMD, RNFR, and UMASK.
Otherwise, enable them.
.El
.Sh DEFAULTS
The following defaults are used:
.Pp
.Bd -literal -offset indent -compact
checkportcmd none
classtype chroot CHROOT
classtype guest GUEST
classtype real REAL
display none
limit all -1 # unlimited connections
maxtimeout all 7200 # 2 hours
modify all
motd all motd
notify none
passive all
timeout all 900 # 15 minutes
umask all 027
upload all
modify guest off
umask guest 0707
.Ed
.Sh FILES
.Bl -tag -width /usr/share/examples/ftpd/ftpd.conf -compact
.It Pa /etc/ftpd.conf
This file.
.It Pa /usr/share/examples/ftpd/ftpd.conf
A sample
.Nm
file.
.El
.Sh SEE ALSO
.Xr ftpchroot 5 ,
.Xr ftpusers 5 ,
.Xr ftpd 8
.Sh HISTORY
The
.Nm
functionality was implemented in
.Nx 1.3
and later releases by Luke Mewburn, based on work by Simon Burge.