134 lines
3.2 KiB
Plaintext
134 lines
3.2 KiB
Plaintext
# $NetBSD: RAMDISK,v 1.7 1996/11/19 21:04:48 gwr Exp $
|
|
|
|
#
|
|
# RAMDISK: Root/swap on ramdisk
|
|
# This kernel is used to:
|
|
# format the disk (not yet implemented)
|
|
# partition the disk (disklabel)
|
|
# install the miniroot in the swap partition
|
|
#
|
|
|
|
include "arch/sun3/conf/std.sun3"
|
|
|
|
# Machines to be supported by this kernel
|
|
options FPU_EMULATE # XXX - Should not be needed!
|
|
options HAVECACHE # Sun3/260 VAC
|
|
|
|
# Needs to be set per system. i.e change these as you see fit
|
|
maxusers 2
|
|
|
|
# Standard system options
|
|
|
|
# Debugging options. Uncomment either this:
|
|
#options DDB
|
|
# ... or these two: (for KGDB on another machine)
|
|
makeoptions DEBUG="-g" # symbols for kgdb + nm
|
|
options KGDB
|
|
|
|
# Enable the hooks used for initializing the ram-disk.
|
|
options RAMDISK_HOOKS
|
|
options MINIROOTSIZE=512 # 256K
|
|
|
|
# Filesystem options
|
|
# May need NFSCLIENT to get miniroot image
|
|
options NFSCLIENT # nfs client support
|
|
# Need FFS for the ramdisk image
|
|
options FFS # ufs file system
|
|
options FIFO # FIFOs; RECOMMENDED
|
|
|
|
# Networking options
|
|
options INET # IP prototol stack support
|
|
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
|
|
# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...)
|
|
options NFS_BOOT_RWSIZE=1024
|
|
|
|
# Compatability options
|
|
#options COMPAT_SUNOS # can run SunOS 4.1.1 executables
|
|
#options COMPAT_43 # and 4.3BSD and ...
|
|
#options COMPAT_10 # NetBSD 1.0
|
|
options COMPAT_11 # NetBSD 1.1
|
|
options COMPAT_12 # NetBSD 1.2
|
|
options UCONSOLE # Allow non-root TIOCCONS
|
|
|
|
# Sun3-specific debugging options
|
|
options DIAGNOSTIC
|
|
|
|
# The config program assumes all devices have partions...
|
|
# Is it OK to put swap on a non-existent partition?
|
|
config netbsd root on rd0a swap on rd0b
|
|
|
|
#
|
|
# Serial ports
|
|
#
|
|
zstty0 at zsc1 channel 0 # ttya
|
|
zstty1 at zsc1 channel 1 # ttyb
|
|
|
|
kbd0 at zsc0 channel 0 # keyboard
|
|
ms0 at zsc0 channel 1 # mouse
|
|
|
|
#
|
|
# Network devices
|
|
#
|
|
|
|
# Intel Ethernet (onboard, or VME)
|
|
ie0 at obio0 addr ? level ?
|
|
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
|
|
|
|
# Lance Ethernet (only onboard)
|
|
le0 at obio0 addr ? level ?
|
|
|
|
#
|
|
# Disk and tape devices
|
|
#
|
|
|
|
# Sun3 "si" SCSI controller (NCR 5380)
|
|
si0 at obio0 addr ? level ?
|
|
si0 at vmes0 addr 0xff200000 level 2 vect 0x40
|
|
si1 at vmes0 addr 0xff204000 level 2 vect 0x41
|
|
|
|
# Xylogics 7053 controllers
|
|
# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
|
|
# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
|
|
# xd* at xdc? drive ?
|
|
|
|
# Xylogics 450/451 controllers
|
|
# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
|
|
# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
|
|
# xy* at xyc? drive ?
|
|
|
|
# Xylogics 472 tape controllers?
|
|
|
|
#
|
|
# Frame buffer devices
|
|
# (Not needed for the RAMDISK installation kernel)
|
|
|
|
#
|
|
# SCSI infrastructure
|
|
#
|
|
scsibus* at scsi?
|
|
|
|
# Sun compatible scsi device mappings
|
|
sd0 at scsibus? target 0 lun 0
|
|
sd1 at scsibus? target 0 lun 1
|
|
sd2 at scsibus? target 1 lun 0
|
|
sd3 at scsibus? target 1 lun 1
|
|
sd* at scsibus? target ? lun ?
|
|
|
|
st0 at scsibus? target 4 lun 0
|
|
st1 at scsibus? target 5 lun 0
|
|
st* at scsibus? target ? lun ?
|
|
|
|
cd0 at scsibus? target 6 lun 0
|
|
cd* at scsibus? target ? lun ?
|
|
|
|
#ch* at scsibus? target ? lun ?
|
|
|
|
# RAM-disk (root for install tape)
|
|
pseudo-device rd 2 # RAM-disk
|
|
|
|
# Misc.
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device sl 2 # CSLIP
|
|
pseudo-device ppp 2 # PPP
|
|
|