595 lines
16 KiB
C
595 lines
16 KiB
C
/* $NetBSD: esp.c,v 1.5 1998/08/15 05:16:43 mycroft Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace
|
|
* Simulation Facility, NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1994 Peter Galbavy
|
|
* Copyright (c) 1995 Paul Kranenburg
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Peter Galbavy
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Based on aic6360 by Jarle Greipsland
|
|
*
|
|
* Acknowledgements: Many of the algorithms used in this driver are
|
|
* inspired by the work of Julian Elischer (julian@tfs.com) and
|
|
* Charles Hannum (mycroft@duality.gnu.ai.mit.edu). Thanks a million!
|
|
*/
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/device.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/user.h>
|
|
#include <sys/queue.h>
|
|
|
|
#include <dev/scsipi/scsi_all.h>
|
|
#include <dev/scsipi/scsipi_all.h>
|
|
#include <dev/scsipi/scsiconf.h>
|
|
#include <dev/scsipi/scsi_message.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/autoconf.h>
|
|
#include <machine/cpu.h>
|
|
|
|
#include <dev/ic/ncr53c9xreg.h>
|
|
#include <dev/ic/ncr53c9xvar.h>
|
|
|
|
#include <sparc64/dev/sbusvar.h>
|
|
#include <sparc64/dev/dmareg.h>
|
|
#include <sparc64/dev/dmavar.h>
|
|
#include <sparc64/dev/espvar.h>
|
|
|
|
void espattach_sbus __P((struct device *, struct device *, void *));
|
|
void espattach_obio __P((struct device *, struct device *, void *));
|
|
void espattach_dma __P((struct device *, struct device *, void *));
|
|
int espmatch_sbus __P((struct device *, struct cfdata *, void *));
|
|
int espmatch_obio __P((struct device *, struct cfdata *, void *));
|
|
|
|
void espattach __P((struct esp_softc *));
|
|
|
|
/* Linkup to the rest of the kernel */
|
|
struct cfattach esp_sbus_ca = {
|
|
sizeof(struct esp_softc), espmatch_sbus, espattach_sbus
|
|
};
|
|
struct cfattach esp_ca = {
|
|
sizeof(struct esp_softc), espmatch_sbus, espattach_dma
|
|
};
|
|
struct cfattach fas_ca = {
|
|
sizeof(struct esp_softc), espmatch_sbus, espattach_sbus
|
|
};
|
|
struct cfattach esp_obio_ca = {
|
|
sizeof(struct esp_softc), espmatch_obio, espattach_obio
|
|
};
|
|
|
|
struct scsipi_adapter esp_switch = {
|
|
ncr53c9x_scsi_cmd,
|
|
minphys, /* no max at this level; handled by DMA code */
|
|
NULL,
|
|
NULL,
|
|
};
|
|
|
|
struct scsipi_device esp_dev = {
|
|
NULL, /* Use default error handler */
|
|
NULL, /* have a queue, served by this */
|
|
NULL, /* have no async handler */
|
|
NULL, /* Use default 'done' routine */
|
|
};
|
|
|
|
/*
|
|
* Functions and the switch for the MI code.
|
|
*/
|
|
u_char esp_read_reg __P((struct ncr53c9x_softc *, int));
|
|
void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char));
|
|
int esp_dma_isintr __P((struct ncr53c9x_softc *));
|
|
void esp_dma_reset __P((struct ncr53c9x_softc *));
|
|
int esp_dma_intr __P((struct ncr53c9x_softc *));
|
|
int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *,
|
|
size_t *, int, size_t *));
|
|
void esp_dma_go __P((struct ncr53c9x_softc *));
|
|
void esp_dma_stop __P((struct ncr53c9x_softc *));
|
|
int esp_dma_isactive __P((struct ncr53c9x_softc *));
|
|
|
|
struct ncr53c9x_glue esp_glue = {
|
|
esp_read_reg,
|
|
esp_write_reg,
|
|
esp_dma_isintr,
|
|
esp_dma_reset,
|
|
esp_dma_intr,
|
|
esp_dma_setup,
|
|
esp_dma_go,
|
|
esp_dma_stop,
|
|
esp_dma_isactive,
|
|
NULL, /* gl_clear_latched_intr */
|
|
};
|
|
|
|
int
|
|
espmatch_sbus(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
struct sbus_attach_args *sa = aux;
|
|
|
|
return (strcmp(cf->cf_driver->cd_name, sa->sa_name) == 0);
|
|
}
|
|
|
|
int
|
|
espmatch_obio(parent, cf, aux)
|
|
struct device *parent;
|
|
struct cfdata *cf;
|
|
void *aux;
|
|
{
|
|
union obio_attach_args *uoba = aux;
|
|
struct obio4_attach_args *oba;
|
|
|
|
if (uoba->uoba_isobio4 == 0)
|
|
return (0);
|
|
|
|
oba = &uoba->uoba_oba4;
|
|
return (bus_space_probe(oba->oba_bustag, 0,
|
|
oba->oba_paddr,
|
|
1, /* probe size */
|
|
0, /* offset */
|
|
0, /* flags */
|
|
NULL, NULL));
|
|
}
|
|
|
|
void
|
|
espattach_sbus(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct esp_softc *esc = (void *)self;
|
|
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
|
|
struct sbus_attach_args *sa = aux;
|
|
|
|
esc->sc_bustag = sa->sa_bustag;
|
|
esc->sc_dmatag = sa->sa_dmatag;
|
|
|
|
sc->sc_id = getpropint(sa->sa_node, "initiator-id", 7);
|
|
sc->sc_freq = getpropint(sa->sa_node, "clock-frequency", -1);
|
|
if (sc->sc_freq < 0)
|
|
sc->sc_freq = ((struct sbus_softc *)
|
|
sc->sc_dev.dv_parent)->sc_clockfreq;
|
|
|
|
/*
|
|
* Find the DMA by poking around the dma device structures
|
|
*
|
|
* What happens here is that if the dma driver has not been
|
|
* configured, then this returns a NULL pointer. Then when the
|
|
* dma actually gets configured, it does the opposing test, and
|
|
* if the sc->sc_esp field in it's softc is NULL, then tries to
|
|
* find the matching esp driver.
|
|
*/
|
|
esc->sc_dma = (struct dma_softc *)getdevunit("dma", sc->sc_dev.dv_unit);
|
|
|
|
/*
|
|
* and a back pointer to us, for DMA
|
|
*/
|
|
if (esc->sc_dma)
|
|
esc->sc_dma->sc_esp = esc;
|
|
else {
|
|
/*
|
|
* FAS chips have the DMA in the fas node. The first set
|
|
* of "reg" is the DMA controller, the second set is the FAS366
|
|
* itself. Need to deal w/this somehow.
|
|
*/
|
|
printf("\n");
|
|
panic("espattach: no dma found");
|
|
}
|
|
|
|
/*
|
|
* Map my registers in, if they aren't already in virtual
|
|
* address space.
|
|
*/
|
|
if (sa->sa_promvaddr)
|
|
esc->sc_reg = (volatile u_char *) sa->sa_promvaddr;
|
|
else {
|
|
bus_space_handle_t bh;
|
|
if (sbus_bus_map(sa->sa_bustag,
|
|
sa->sa_slot,
|
|
sa->sa_offset,
|
|
sa->sa_size,
|
|
BUS_SPACE_MAP_LINEAR,
|
|
0, &bh) != 0) {
|
|
printf("%s @ sbus: cannot map registers\n",
|
|
self->dv_xname);
|
|
return;
|
|
}
|
|
esc->sc_reg = (volatile u_char *)bh;
|
|
}
|
|
|
|
esc->sc_pri = sa->sa_pri;
|
|
|
|
/* add me to the sbus structures */
|
|
esc->sc_sd.sd_reset = (void *) ncr53c9x_reset;
|
|
sbus_establish(&esc->sc_sd, &sc->sc_dev);
|
|
|
|
if (sa->sa_bp != NULL && strcmp(sa->sa_bp->name, "esp") == 0 &&
|
|
SAME_ESP(sc, sa->sa_bp, sa))
|
|
bootpath_store(1, sa->sa_bp + 1);
|
|
|
|
espattach(esc);
|
|
}
|
|
|
|
void
|
|
espattach_dma(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
struct esp_softc *esc = (void *)self;
|
|
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
|
|
struct sbus_attach_args *sa = aux;
|
|
|
|
esc->sc_bustag = sa->sa_bustag;
|
|
esc->sc_dmatag = sa->sa_dmatag;
|
|
|
|
sc->sc_id = getpropint(sa->sa_node, "initiator-id", 7);
|
|
sc->sc_freq = getpropint(sa->sa_node, "clock-frequency", -1);
|
|
|
|
esc->sc_dma = (struct dma_softc *)parent;
|
|
esc->sc_dma->sc_esp = esc;
|
|
|
|
/*
|
|
* Map my registers in, if they aren't already in virtual
|
|
* address space.
|
|
*/
|
|
if (sa->sa_npromvaddrs)
|
|
esc->sc_reg = (volatile u_char *) sa->sa_promvaddrs[0];
|
|
else {
|
|
bus_space_handle_t bh;
|
|
if (sbus_bus_map(sa->sa_bustag, sa->sa_slot,
|
|
sa->sa_offset,
|
|
sa->sa_size,
|
|
BUS_SPACE_MAP_LINEAR,
|
|
0, &bh) != 0) {
|
|
printf("%s @ dma: cannot map registers\n",
|
|
self->dv_xname);
|
|
return;
|
|
}
|
|
esc->sc_reg = (volatile u_char *)bh;
|
|
}
|
|
|
|
/* Establish interrupt handler */
|
|
esc->sc_pri = sa->sa_pri;
|
|
|
|
/* Assume SBus is grandparent */
|
|
esc->sc_sd.sd_reset = (void *) ncr53c9x_reset;
|
|
sbus_establish(&esc->sc_sd, parent);
|
|
|
|
if (sa->sa_bp != NULL && strcmp(sa->sa_bp->name, "esp") == 0 &&
|
|
SAME_ESP(sc, sa->sa_bp, sa))
|
|
bootpath_store(1, sa->sa_bp + 1);
|
|
|
|
espattach(esc);
|
|
}
|
|
|
|
void
|
|
espattach_obio(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
union obio_attach_args *uoba = aux;
|
|
struct obio4_attach_args *oba = &uoba->uoba_oba4;
|
|
struct esp_softc *esc = (void *)self;
|
|
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
|
|
bus_space_handle_t bh;
|
|
|
|
esc->sc_bustag = oba->oba_bustag;
|
|
esc->sc_dmatag = oba->oba_dmatag;
|
|
|
|
sc->sc_id = 7;
|
|
sc->sc_freq = 24000000;
|
|
|
|
/*
|
|
* Find the DMA by poking around the dma device structures
|
|
*/
|
|
esc->sc_dma = (struct dma_softc *)getdevunit("dma", sc->sc_dev.dv_unit);
|
|
|
|
/*
|
|
* and a back pointer to us, for DMA
|
|
*/
|
|
if (esc->sc_dma)
|
|
esc->sc_dma->sc_esp = esc;
|
|
else {
|
|
printf("\n");
|
|
panic("espattach: no dma found");
|
|
}
|
|
|
|
if (obio_bus_map(oba->oba_bustag, oba->oba_paddr,
|
|
0, /* offset */
|
|
16, /* size (of ncr53c9xreg) */
|
|
BUS_SPACE_MAP_LINEAR,
|
|
0, &bh) != 0) {
|
|
printf("%s @ obio: cannot map registers\n", self->dv_xname);
|
|
return;
|
|
}
|
|
|
|
esc->sc_reg = (volatile u_char *)bh;
|
|
esc->sc_pri = oba->oba_pri;
|
|
|
|
if (oba->oba_bp != NULL && strcmp(oba->oba_bp->name, "esp") == 0 &&
|
|
oba->oba_bp->val[0] == -1 &&
|
|
oba->oba_bp->val[1] == sc->sc_dev.dv_unit)
|
|
bootpath_store(1, oba->oba_bp + 1);
|
|
|
|
espattach(esc);
|
|
}
|
|
|
|
/*
|
|
* Attach this instance, and then all the sub-devices
|
|
*/
|
|
void
|
|
espattach(esc)
|
|
struct esp_softc *esc;
|
|
{
|
|
struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x;
|
|
void *icookie;
|
|
|
|
/*
|
|
* Set up glue for MI code early; we use some of it here.
|
|
*/
|
|
sc->sc_glue = &esp_glue;
|
|
|
|
#if 0
|
|
printf(" pri %d", esc->sc_pri);
|
|
#endif
|
|
|
|
/* gimme Mhz */
|
|
sc->sc_freq /= 1000000;
|
|
|
|
/*
|
|
* XXX More of this should be in ncr53c9x_attach(), but
|
|
* XXX should we really poke around the chip that much in
|
|
* XXX the MI code? Think about this more...
|
|
*/
|
|
|
|
/*
|
|
* It is necessary to try to load the 2nd config register here,
|
|
* to find out what rev the esp chip is, else the ncr53c9x_reset
|
|
* will not set up the defaults correctly.
|
|
*/
|
|
sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB;
|
|
sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE;
|
|
sc->sc_cfg3 = NCRCFG3_CDB;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
|
|
if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) !=
|
|
(NCRCFG2_SCSI2 | NCRCFG2_RPE)) {
|
|
sc->sc_rev = NCR_VARIANT_ESP100;
|
|
} else {
|
|
sc->sc_cfg2 = NCRCFG2_SCSI2;
|
|
NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2);
|
|
sc->sc_cfg3 = 0;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK);
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
if (NCR_READ_REG(sc, NCR_CFG3) !=
|
|
(NCRCFG3_CDB | NCRCFG3_FCLK)) {
|
|
sc->sc_rev = NCR_VARIANT_ESP100A;
|
|
} else {
|
|
/* NCRCFG2_FE enables > 64K transfers */
|
|
sc->sc_cfg2 |= NCRCFG2_FE;
|
|
sc->sc_cfg3 = 0;
|
|
NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3);
|
|
sc->sc_rev = NCR_VARIANT_ESP200;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* XXX minsync and maxxfer _should_ be set up in MI code,
|
|
* XXX but it appears to have some dependency on what sort
|
|
* XXX of DMA we're hooked up to, etc.
|
|
*/
|
|
|
|
/*
|
|
* This is the value used to start sync negotiations
|
|
* Note that the NCR register "SYNCTP" is programmed
|
|
* in "clocks per byte", and has a minimum value of 4.
|
|
* The SCSI period used in negotiation is one-fourth
|
|
* of the time (in nanoseconds) needed to transfer one byte.
|
|
* Since the chip's clock is given in MHz, we have the following
|
|
* formula: 4 * period = (1000 / freq) * 4
|
|
*/
|
|
sc->sc_minsync = 1000 / sc->sc_freq;
|
|
|
|
/*
|
|
* Alas, we must now modify the value a bit, because it's
|
|
* only valid when can switch on FASTCLK and FASTSCSI bits
|
|
* in config register 3...
|
|
*/
|
|
switch (sc->sc_rev) {
|
|
case NCR_VARIANT_ESP100:
|
|
sc->sc_maxxfer = 64 * 1024;
|
|
sc->sc_minsync = 0; /* No synch on old chip? */
|
|
break;
|
|
|
|
case NCR_VARIANT_ESP100A:
|
|
sc->sc_maxxfer = 64 * 1024;
|
|
/* Min clocks/byte is 5 */
|
|
sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5);
|
|
break;
|
|
|
|
case NCR_VARIANT_ESP200:
|
|
sc->sc_maxxfer = 16 * 1024 * 1024;
|
|
/* XXX - do actually set FAST* bits */
|
|
break;
|
|
}
|
|
|
|
/* Establish interrupt channel */
|
|
icookie = bus_intr_establish(esc->sc_bustag,
|
|
esc->sc_pri, 0,
|
|
(int(*)__P((void*)))ncr53c9x_intr, sc);
|
|
|
|
/* register interrupt stats */
|
|
evcnt_attach(&sc->sc_dev, "intr", &sc->sc_intrcnt);
|
|
|
|
/* Do the common parts of attachment. */
|
|
ncr53c9x_attach(sc, &esp_switch, &esp_dev);
|
|
|
|
/* Turn on target selection using the `dma' method */
|
|
ncr53c9x_dmaselect = 1;
|
|
|
|
bootpath_store(1, NULL);
|
|
}
|
|
|
|
/*
|
|
* Glue functions.
|
|
*/
|
|
|
|
u_char
|
|
esp_read_reg(sc, reg)
|
|
struct ncr53c9x_softc *sc;
|
|
int reg;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (esc->sc_reg[reg * 4]);
|
|
}
|
|
|
|
void
|
|
esp_write_reg(sc, reg, val)
|
|
struct ncr53c9x_softc *sc;
|
|
int reg;
|
|
u_char val;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
u_char v = val;
|
|
|
|
esc->sc_reg[reg * 4] = v;
|
|
}
|
|
|
|
int
|
|
esp_dma_isintr(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (DMA_ISINTR(esc->sc_dma));
|
|
}
|
|
|
|
void
|
|
esp_dma_reset(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
DMA_RESET(esc->sc_dma);
|
|
}
|
|
|
|
int
|
|
esp_dma_intr(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (DMA_INTR(esc->sc_dma));
|
|
}
|
|
|
|
int
|
|
esp_dma_setup(sc, addr, len, datain, dmasize)
|
|
struct ncr53c9x_softc *sc;
|
|
caddr_t *addr;
|
|
size_t *len;
|
|
int datain;
|
|
size_t *dmasize;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize));
|
|
}
|
|
|
|
void
|
|
esp_dma_go(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
DMA_GO(esc->sc_dma);
|
|
}
|
|
|
|
void
|
|
esp_dma_stop(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
DMACSR(esc->sc_dma) &= ~D_EN_DMA;
|
|
}
|
|
|
|
int
|
|
esp_dma_isactive(sc)
|
|
struct ncr53c9x_softc *sc;
|
|
{
|
|
struct esp_softc *esc = (struct esp_softc *)sc;
|
|
|
|
return (DMA_ISACTIVE(esc->sc_dma));
|
|
}
|