NetBSD/sys/arch/arm/footbridge/dc21285reg.h

396 lines
11 KiB
C

/* $NetBSD: dc21285reg.h,v 1.5 2007/12/14 11:08:03 chris Exp $ */
/*
* Copyright (c) 1997,1998 Mark Brinicombe.
* Copyright (c) 1997,1998 Causality Limited
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe
* for the NetBSD Project.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* DC21285 register definitions
*/
/* PCI registers in CSR space */
#define VENDOR_ID 0x00
#define DC21285_VENDOR_ID 0x1011
#define DEVICE_ID 0x02
#define DC21285_DEVICE_ID 0x1065
#define REVISION 0x08
#define CLASS 0x0A
#define CSR_BASE_MEMORY_ADDR 0x10
#define CSR_BASE_IO_ADDR 0x14
#define SDRAM_MEMORY_ADDR 0x18
/* Other PCI control / status registers */
#define OUTBOUND_INT_STATUS 0x030
#define OUTBOUND_INT_MASK 0x034
#define I2O_INBOUND_FIFO 0x040
#define I2O_OUTBOUND_FIFO 0x044
/* Mailbox registers */
#define MAILBOX_0 0x050
#define MAILBOX_1 0x054
#define MAILBOX_2 0x058
#define MAILBOX_3 0x05C
#define DOORBELL 0x060
#define DOORBELL_SETUP 0x064
#define ROM_WRITE_BYTE_ADDRESS 0x068
/* DMA Channel registers */
#define DMA_CHAN_1_BYTE_COUNT 0x80
#define DMA_CHAN_1_PCI_ADDR 0x84
#define DMA_CHAN_1_SDRAM_ADDR 0x88
#define DMA_CHAN_1_DESCRIPT 0x8C
#define DMA_CHAN_1_CONTROL 0x90
#define DMA_CHAN_2_BYTE_COUNT 0xA0
#define DMA_CHAN_2_PCI_ADDR 0xA4
#define DMA_CHAN_2_SDRAM_ADDR 0xA8
#define DMA_CHAN_2_DESCRIPTOR 0xAC
#define DMA_CHAN_2_CONTROL 0xB0
/* Offsets into DMA descriptor */
#define DMA_BYTE_COUNT 0
#define DMA_PCI_ADDRESS 4
#define DMA_SDRAM_ADDRESS 8
#define DMA_NEXT_DESCRIPTOR 12
/* DMA byte count register bits */
#define DMA_INTERBURST_SHIFT 24
#define DMA_PCI_TO_SDRAM 0
#define DMA_SDRAM_TO_PCI (1 << 30)
#define DMA_END_CHAIN (1 << 31)
/* DMA control bits */
#define DMA_ENABLE (1 << 0)
#define DMA_TRANSFER_DONE (1 << 2)
#define DMA_ERROR (1 << 3)
#define DMA_REGISTOR_DESCRIPTOR (1 << 4)
#define DMA_PCI_MEM_READ (0 << 5)
#define DMA_PCI_MEM_READ_LINE (1 << 5)
#define DMA_PCI_MEM_READ_MULTI1 (2 << 5)
#define DMA_PCI_MEM_READ_MULTI2 (3 << 5)
#define DMA_CHAIN_DONE (1 << 7)
#define DMA_INTERBURST_4 (0 << 8)
#define DMA_INTERBURST_8 (1 << 8)
#define DMA_INTERBURST_16 (2 << 8)
#define DMA_INTERBURST_32 (3 << 8)
#define DMA_PCI_LENGTH_8 0
#define DMA_PCI_LENGTH_16 (1 << 15)
#define DMA_SDRAM_LENGTH_1 (0 << 16)
#define DMA_SDRAM_LENGTH_2 (1 << 16)
#define DMA_SDRAM_LENGTH_4 (2 << 16)
#define DMA_SDRAM_LENGTH_8 (3 << 16)
#define DMA_SDRAM_LENGTH_16 (4 << 16)
/* CSR Base Address Mask */
#define CSR_BA_MASK 0x0F8
#define CSR_MASK_128B 0x00000000
#define CSR_MASK_512KB 0x00040000
#define CSR_MASK_1MB 0x000C0000
#define CSR_MASK_2MB 0x001C0000
#define CSR_MASK_4MB 0x003C0000
#define CSR_MASK_8MB 0x007C0000
#define CSR_MASK_16MB 0x00FC0000
#define CSR_MASK_32MB 0x01FC0000
#define CSR_MASK_64MB 0x03FC0000
#define CSR_MASK_128MB 0x07FC0000
#define CSR_MASK_256MB 0x0FFC0000
#define CSR_BA_OFFSET 0x0FC
/* SDRAM Base Address Mask */
#define SDRAM_BA_MASK 0x100
#define SDRAM_MASK_256KB 0x00000000
#define SDRAM_MASK_512KB 0x00040000
#define SDRAM_MASK_1MB 0x000C0000
#define SDRAM_MASK_2MB 0x001C0000
#define SDRAM_MASK_4MB 0x003C0000
#define SDRAM_MASK_8MB 0x007C0000
#define SDRAM_MASK_16MB 0x00FC0000
#define SDRAM_MASK_32MB 0x01FC0000
#define SDRAM_MASK_64MB 0x03FC0000
#define SDRAM_MASK_128MB 0x07FC0000
#define SDRAM_MASK_256MB 0x0FFC0000
#define SDRAM_WINDOW_DISABLE (1 << 31)
#define SDRAM_BA_OFFSET 0x104
/* Expansion ROM Base Address Mask */
#define EXPANSION_ROM_BA_MASK 0x108
#define ROM_MASK_1MB 0x00000000
#define ROM_MASK_2MB 0x00100000
#define ROM_MASK_4MB 0x00300000
#define ROM_MASK_8MB 0x00700000
#define ROM_MASK_16MB 0x00F00000
#define ROM_WINDOW_DISABLE (1 << 31)
/* SDRAM configuration */
#define SDRAM_TIMING 0x10C
#define SDRAM_ARRAY_SIZE_0 0x0
#define SDRAM_ARRAY_SIZE_1MB 0x1
#define SDRAM_ARRAY_SIZE_2MB 0x2
#define SDRAM_ARRAY_SIZE_4MB 0x3
#define SDRAM_ARRAY_SIZE_8MB 0x4
#define SDRAM_ARRAY_SIZE_16MB 0x5
#define SDRAM_ARRAY_SIZE_32MB 0x6
#define SDRAM_ARRAY_SIZE_64MB 0x7
#define SDRAM_2_BANKS 0
#define SDRAM_4_BANKS (1 << 3)
#define SDRAM_ADDRESS_MUX_SHIFT 4
#define SDRAM_ARRAY_BASE_SHIFT 20
#define SDRAM_ADDRESS_SIZE_0 0x110
#define SDRAM_ADDRESS_SIZE_1 0x114
#define SDRAM_ADDRESS_SIZE_2 0x118
#define SDRAM_ADDRESS_SIZE_3 0x11C
/* I2O registers */
#define I2O_INBOUND_FREE_HEAD 0x120
#define I2O_INBOUND_POST_TAIL 0x124
#define I2O_OUTBOUND_POST_HEAD 0x128
#define I2O_OUTBOUND_FREE_TAIL 0x12c
#define I2O_INBOUND_FREE_COUNT 0x130
#define I2O_OUTBOUND_POST_COUNT 0x134
#define I2O_INBOUND_POST_COUNT 0x138
/* Control register */
#define SA_CONTROL 0x13C
#define INITIALIZE_COMPLETE (1 << 0)
#define ASSERT_SERR (1 << 1)
#define RECEIVED_SERR (1 << 3)
#define SA_SDRAM_PARITY_ERROR (1 << 4)
#define PCI_SDRAM_PARITY_ERROR (1 << 5)
#define DMA_SDRAM_PARITY_ERROR (1 << 6)
#define DISCARD_TIMER_EXPIRED (1 << 8)
#define PCI_NOT_RESET (1 << 9)
#define WATCHDOG_ENABLE (1 << 13)
#define I2O_SIZE_256 (0 << 10)
#define I2O_SIZE_512 (1 << 10)
#define I2O_SIZE_1024 (2 << 10)
#define I2O_SIZE_2048 (3 << 10)
#define I2O_SIZE_4096 (4 << 10)
#define I2O_SIZE_8192 (5 << 10)
#define I2O_SIZE_16384 (6 << 10)
#define I2O_SIZE_32768 (7 << 10)
#define ROM_WIDTH_8 (3 << 14)
#define ROM_WIDTH_16 (1 << 14)
#define ROM_WIDTH_32 (2 << 14)
#define ROM_ACCESS_TIME_SHIFT 16
#define ROM_BURST_TIME_SHIFT 20
#define ROM_TRISTATE_TIME_SHIFT 24
#define XCS_DIRECTION_SHIFT 28
#define PCI_CENTRAL_FUNCTION (1 << 31)
#define PCI_ADDRESS_EXTENSION 0x140
#define PREFETCHABLE_MEM_RANGE 0x144
/* XBUS / PCI Arbiter registers */
#define XBUS_CYCLE_ARBITER 0x148
#define XBUS_CYCLE_0_SHIFT 0
#define XBUS_CYCLE_1_SHIFT 3
#define XBUS_CYCLE_2_SHIFT 6
#define XBUS_CYCLE_3_SHIFT 9
#define XBUS_CYCLE_STROBE_SHIFT 12
#define XBUS_PCI_ARBITER (1 << 23)
#define XBUS_INT_IN_L0_LOW 0
#define XBUS_INT_IN_L0_HIGH (1 << 24)
#define XBUS_INT_IN_L1_LOW 0
#define XBUS_INT_IN_L1_HIGH (1 << 25)
#define XBUS_INT_IN_L2_LOW 0
#define XBUS_INT_IN_L2_HIGH (1 << 26)
#define XBUS_INT_IN_L3_LOW 0
#define XBUS_INT_IN_L3_HIGH (1 << 27)
#define XBUS_INT_XCS0_LOW 0
#define XBUS_INT_XCS0_HIGH (1 << 28)
#define XBUS_INT_XCS1_LOW 0
#define XBUS_INT_XCS1_HIGH (1 << 29)
#define XBUS_INT_XCS2_LOW 0
#define XBUS_INT_XCS2_HIGH (1 << 30)
#define XBUS_PCI_INT_REQUEST (1 << 31)
#define XBUS_IO_STROBE_MASK 0x14C
#define XBUS_IO_STROBE_0_SHIFT 0
#define XBUS_IO_STROBE_2_SHIFT 8
#define XBUS_IO_STROBE_3_SHIFT 16
#define XBUS_IO_STROBE_4_SHIFT 24
#define DOORBELL_PCI_MASK 0x150
#define DOORBELL_SA_MASK 0x154
/* UART registers */
#define UART_DATA 0x160
#define UART_RX_STAT 0x164
#define UART_PARITY_ERROR 0x01
#define UART_FRAME_ERROR 0x02
#define UART_OVERRUN_ERROR 0x04
#define UART_RX_ERROR (UART_PARITY_ERROR | UART_FRAME_ERROR \
| UART_OVERRUN_ERROR)
#define UART_H_UBRLCR 0x168
#define UART_BREAK 0x01
#define UART_PARITY_ENABLE 0x02
#define UART_ODD_PARITY 0x00
#define UART_EVEN_PARITY 0x04
#define UART_STOP_BITS_1 0x00
#define UART_STOP_BITS_2 0x08
#define UART_ENABLE_FIFO 0x10
#define UART_DATA_BITS_5 0x00
#define UART_DATA_BITS_6 0x20
#define UART_DATA_BITS_7 0x40
#define UART_DATA_BITS_8 0x60
#define UART_M_UBRLCR 0x16C
#define UART_L_UBRLCR 0x170
#define UART_BRD(fclk, x) (((fclk) / 4 / 16 / x) - 1)
#define UART_CONTROL 0x174
#define UART_ENABLE 0x01
#define UART_SIR_ENABLE 0x02
#define UART_IRDA_ENABLE 0x04
#define UART_FLAGS 0x178
#define UART_TX_BUSY 0x08
#define UART_RX_FULL 0x10
#define UART_TX_EMPTY 0x20
/* Interrupt numbers for IRQ and FIQ registers */
#define IRQ_RESERVED0 0x00
#define IRQ_SOFTINT 0x01
#define IRQ_SERIAL_RX 0x02
#define IRQ_SERIAL_TX 0x03
#define IRQ_TIMER_1 0x04
#define IRQ_TIMER_2 0x05
#define IRQ_TIMER_3 0x06
#define IRQ_TIMER_4 0x07
#define IRQ_IN_L0 0x08
#define IRQ_IN_L1 0x09
#define IRQ_IN_L2 0x0A
#define IRQ_IN_L3 0x0B
#define IRQ_XCS_L0 0x0C
#define IRQ_XCS_L1 0x0D
#define IRQ_XCS_L2 0x0E
#define IRQ_DOORBELL 0x0F
#define IRQ_DMA_1 0x10
#define IRQ_DMA_2 0x11
#define IRQ_PCI 0x12
#define IRQ_PMCSR 0x13
#define IRQ_RESERVED1 0x14
#define IRQ_RESERVED2 0x15
#define IRQ_BIST 0x16
#define IRQ_SERR 0x17
#define IRQ_SDRAM_PARITY 0x18
#define IRQ_I2O 0x19
#define IRQ_RESERVED3 0x1A
#define IRQ_DISCARD_TIMER 0x1B
#define IRQ_DATA_PARITY 0x1C
#define IRQ_MASTER_ABORT 0x1D
#define IRQ_TARGET_ABORT 0x1E
#define IRQ_PARITY 0x1F
/* IRQ and FIQ status / enable registers */
#define IRQ_STATUS 0x180
#define IRQ_RAW_STATUS 0x184
#define IRQ_ENABLE 0x188
#define IRQ_ENABLE_SET 0x188
#define IRQ_ENABLE_CLEAR 0x18c
#define IRQ_SOFT 0x190
#define FIQ_STATUS 0x280
#define FIQ_RAW_STATUS 0x284
#define FIQ_ENABLE 0x288
#define FIQ_ENABLE_SET 0x288
#define FIQ_ENABLE_CLEAR 0x28c
#define FIQ_SOFT 0x290
/* Timer registers */
/* Relative offsets and bases */
#define TIMER_LOAD 0x00
#define TIMER_VALUE 0x04
#define TIMER_CONTROL 0x08
#define TIMER_CLEAR 0x0C
#define TIMER_1_BASE 0x300
#define TIMER_2_BASE 0x320
#define TIMER_3_BASE 0x340
#define TIMER_4_BASE 0x360
/* Control register bits */
#define TIMER_FCLK 0x00
#define TIMER_FCLK_16 0x04
#define TIMER_FCLK_256 0x08
#define TIMER_EXTERNAL 0x0C
#define TIMER_MODE_FREERUN 0x00
#define TIMER_MODE_PERIODIC 0x40
#define TIMER_ENABLE 0x80
/* Maximum timer value */
#define TIMER_MAX_VAL 0x00FFFFFF
/* Specific registers */
#define TIMER_1_LOAD 0x300
#define TIMER_1_VALUE 0x304
#define TIMER_1_CONTROL 0x308
#define TIMER_1_CLEAR 0x30C
#define TIMER_2_LOAD 0x320
#define TIMER_2_VALUE 0x324
#define TIMER_2_CONTROL 0x328
#define TIMER_2_CLEAR 0x32C
#define TIMER_3_LOAD 0x340
#define TIMER_3_VALUE 0x344
#define TIMER_3_CONTROL 0x348
#define TIMER_3_CLEAR 0x34C
#define TIMER_4_LOAD 0x360
#define TIMER_4_VALUE 0x364
#define TIMER_4_CONTROL 0x368
#define TIMER_4_CLEAR 0x36C
/* Miscellaneous definitions */
#ifndef FCLK
#define FCLK 50000000
#endif