6d265bd894
the option is commented out on everything but kernels I was able to recognize as INSTALL-like or ones for small memory machines
194 lines
5.7 KiB
Plaintext
194 lines
5.7 KiB
Plaintext
# $NetBSD: FOUR_TTYS,v 1.29 2002/01/27 13:23:28 jdolecek Exp $
|
|
|
|
# FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
|
|
# like GENERIC but both zs chips are used as ttys
|
|
|
|
include "arch/sun3/conf/std.sun3"
|
|
|
|
# Machines to be supported by this kernel
|
|
options FPU_EMULATE
|
|
options HAVECACHE # Sun3/260 VAC
|
|
|
|
# Needs to be set per system. i.e change these as you see fit
|
|
maxusers 4
|
|
|
|
# Standard system options
|
|
options KTRACE # system call tracing
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
options SYSVSHM # System V shared memory
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
options LKM # loadable kernel modules
|
|
#options INSECURE # disable kernel security level
|
|
#options UCONSOLE # Allow non-root TIOCCONS
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Which kernel debugger? Uncomment either this:
|
|
options DDB
|
|
# ... or these for KGDB (gdb remote target)
|
|
#makeoptions DEBUG="-g" # debugging symbols for gdb
|
|
#options KGDB
|
|
#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01
|
|
|
|
# Other debugging options
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options DEBUG # kernel debugging code
|
|
#options DIAGNOSTIC # extra kernel sanity checking
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
#options PMAP_DEBUG
|
|
#options SCSIDEBUG
|
|
#options SCSIVERBOSE # Verbose SCSI errors
|
|
|
|
# Compatibility options
|
|
options COMPAT_SUNOS # can run SunOS 4.1.1 executables
|
|
options COMPAT_43 # and 4.3BSD and ...
|
|
options COMPAT_10 # NetBSD 1.0
|
|
options COMPAT_11 # NetBSD 1.1
|
|
options COMPAT_12 # NetBSD 1.2
|
|
options COMPAT_13 # NetBSD 1.3
|
|
options COMPAT_14 # NetBSD 1.4
|
|
options COMPAT_AOUT_M68K # support for NetBSD a.out executables
|
|
#options COMPAT_LINUX # can run Linux/m68k executables
|
|
options EXEC_AOUT # support for a.out executables
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# Filesystem options
|
|
file-system FFS # Berkeley Fast Filesystem
|
|
file-system NFS # Sun NFS client support
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system FDESC # /dev/fd/*
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system PROCFS # /proc
|
|
file-system UNION # union file system
|
|
file-system MFS # memory-based filesystem
|
|
|
|
options NFSSERVER # nfs server support
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
|
|
# Networking options
|
|
options INET # IP prototol stack support
|
|
#options GATEWAY # IP packet forwarding
|
|
#options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
#options PFIL_HOOKS # pfil(9) packet filter hooks.
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
# Work-around for root on slow servers (insurance...)
|
|
options NFS_BOOT_RWSIZE=1024
|
|
options NFS_BOOT_BOOTPARAM
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
# On-board I/O space (required)
|
|
include "arch/sun3/conf/obio.sun3"
|
|
|
|
# On-board memory (optional)
|
|
# See frame-buffers
|
|
obmem0 at mainbus?
|
|
|
|
# VME bus support (optional)
|
|
# One unit for each address space
|
|
vme0 at mainbus? # A16/D16
|
|
vme1 at mainbus? # A16/D32
|
|
vme2 at mainbus? # A24/D16
|
|
vme3 at mainbus? # A24/D32
|
|
vme4 at mainbus? # A32/D16
|
|
vme5 at mainbus? # A32/D32
|
|
|
|
#
|
|
# Serial ports
|
|
#
|
|
zstty0 at zsc1 channel 0 # ttya
|
|
zstty1 at zsc1 channel 1 # ttyb
|
|
#
|
|
# Note that by ommitting "kdb0" and "ms0" one can build
|
|
# a kernel that operates four plain serial lines, where
|
|
# two of them are data-leads-only ports wired up using
|
|
# a custom cable on the keyboard connector. The flags 1
|
|
# part sets TIOCFLAG_SOFTCAR (remember, data-leads-only).
|
|
# Note: the signal levels on these are 0/5 Volt TTL.
|
|
#
|
|
zstty2 at zsc0 channel 0 flags 1 # ttyc
|
|
zstty3 at zsc0 channel 1 flags 1 # ttyd
|
|
|
|
#
|
|
# Network devices
|
|
#
|
|
|
|
# Intel Ethernet (onboard, or VME)
|
|
ie0 at obio0 addr 0x0C0000 ipl 3
|
|
ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
|
|
|
|
# Lance Ethernet (only onboard)
|
|
le0 at obio0 addr 0x120000 ipl 3
|
|
|
|
# All Sun3 machines with an "le" (3/50, 3/60) should be
|
|
# presumed to have the old, buggy LANCE chip. (Rev. C)
|
|
options LANCE_REVC_BUG
|
|
|
|
#
|
|
# Disk and tape devices
|
|
#
|
|
|
|
# Sun3 "si" SCSI controller (NCR 5380)
|
|
# See GENERIC for the flags description.
|
|
si0 at obio0 addr 0x140000 ipl 2
|
|
si0 at vme2 addr 0x200000 ipl 2 vect 0x40
|
|
si1 at vme2 addr 0x204000 ipl 2 vect 0x41
|
|
|
|
# Xylogics 450/451 controllers (VME A16/D16)
|
|
xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
|
|
xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
|
|
xy* at xyc? drive ?
|
|
|
|
# Xylogics 7053 controllers (VME A16/D32)
|
|
xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
|
|
xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
|
|
xd* at xdc? drive ?
|
|
|
|
# Xylogics 472 tape controllers?
|
|
|
|
# Sun3/E SCSI+Ethernet board (VME A24/D16)
|
|
# Note: the board uses vect and vect+1
|
|
sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
|
|
sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
|
|
si* at sebuf?
|
|
ie* at sebuf?
|
|
|
|
#
|
|
# Frame buffer devices
|
|
# (not useful if no kbd, right?)
|
|
|
|
#
|
|
# SCSI infrastructure
|
|
#
|
|
scsibus* at scsi?
|
|
|
|
sd* at scsibus? target ? lun ? # SCSI disks
|
|
st* at scsibus? target ? lun ? # SCSI tapes
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
|
ch* at scsibus? target ? lun ? # SCSI changer devices
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
uk* at scsibus? target ? lun ? # unknown SCSI devices
|
|
|
|
# Memory-disk drivers
|
|
pseudo-device md 2
|
|
|
|
# Misc.
|
|
pseudo-device loop 1 # network loopback
|
|
pseudo-device bpfilter 8 # packet filter
|
|
pseudo-device sl 2 # CSLIP
|
|
pseudo-device ppp 2 # PPP
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
#pseudo-device ipfilter # ip filter
|
|
#pseudo-device rnd # /dev/random and in-kernel generator
|
|
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device vnd 4 # paging to files
|
|
#pseudo-device ccd 4 # concatenated disks
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|