| .. |
|
ad1848reg.h
|
|
|
|
aha.c
|
Sync with recent change made to bha.c by mjacob:
|
1998-04-29 01:02:44 +00:00 |
|
ahareg.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-09 10:53:07 +00:00 |
|
ahavar.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-09 10:53:07 +00:00 |
|
aic7xxx.c
|
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
|
1998-04-16 07:12:43 +00:00 |
|
aic7xxxreg.h
|
|
|
|
aic7xxxvar.h
|
Use a stream method for AHC_OUTSL when possible.
|
1998-04-16 07:13:57 +00:00 |
|
aic6360.c
|
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
|
1998-05-23 18:32:29 +00:00 |
|
aic6360reg.h
|
|
|
|
aic6360var.h
|
|
|
|
am7930.c
|
Fix some arithmetics lossage on typeless pointers.
|
1998-05-07 21:13:23 +00:00 |
|
am7930reg.h
|
|
|
|
am7930var.h
|
|
|
|
am7990.c
|
Oops; make the table const.
|
1998-03-29 22:36:42 +00:00 |
|
am7990reg.h
|
|
|
|
am7990var.h
|
Adjust for config changes.
|
1998-01-12 09:23:08 +00:00 |
|
bha.c
|
Cute buglet: you can end up with zero CCBs if there were no targets
|
1998-04-28 23:57:53 +00:00 |
|
bhareg.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-06 23:06:44 +00:00 |
|
bhavar.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-06 23:06:44 +00:00 |
|
bt485reg.h
|
The "mi" TGA driver. It's still not of much use on anything but alpha
|
1998-04-15 20:16:30 +00:00 |
|
cd1190reg.h
|
Erase spurious end-of-comment.
|
1998-05-20 16:06:56 +00:00 |
|
cd1400reg.h
|
Add CD1400_PAR_FIFO_SIZE.
|
1998-05-20 00:03:11 +00:00 |
|
com.c
|
Move the code to wait for carrier on a tty into a common function, since it
|
1998-03-22 00:55:37 +00:00 |
|
comreg.h
|
|
|
|
comvar.h
|
change #ifdefs keying on "alpha" to key on "__NO_SOFT_SERIAL_INTERRUPT"
|
1998-02-02 23:01:02 +00:00 |
|
cs4231reg.h
|
|
|
|
cy.c
|
Fix error in previous change.
|
1998-03-22 19:36:52 +00:00 |
|
cyreg.h
|
|
|
|
cyvar.h
|
|
|
|
dc21040reg.h
|
Change 21040 modes slightly. Prevent infinite autosense loop of 21143 that
|
1998-05-22 18:50:59 +00:00 |
|
dp8390.c
|
Fudge the start of the data pointer of the first mbuf in the chain when
|
1998-01-27 23:26:21 +00:00 |
|
dp8390reg.h
|
|
|
|
dp8390var.h
|
is790 u_char -> int.
|
1997-11-05 07:15:42 +00:00 |
|
ds.h
|
|
|
|
elink3.c
|
For the Rx:Tx split message change "(undefined)" to "3:5".
|
1998-03-04 18:10:03 +00:00 |
|
elink3reg.h
|
|
|
|
elink3var.h
|
|
|
|
hayespreg.h
|
|
|
|
i8042reg.h
|
Don't define absolute ISA addresses here but offsets into the
|
1998-01-18 14:41:37 +00:00 |
|
i8237reg.h
|
|
|
|
i8253reg.h
|
define offsets into "register window" instead of absolute ISA addresses
|
1998-01-19 11:38:00 +00:00 |
|
i82365.c
|
When changing power, wait enough to keep timing constraint
|
1998-05-05 00:37:24 +00:00 |
|
i82365reg.h
|
|
|
|
i82365var.h
|
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
|
1998-05-23 18:32:29 +00:00 |
|
i82586.c
|
Remove `NEW_I82586'
|
1998-02-28 01:14:57 +00:00 |
|
i82586reg.h
|
Remove `_NEW_I82586' tag; all drivers using this file have been converted.
|
1998-02-28 01:07:45 +00:00 |
|
i82586var.h
|
Move "async command" state in here.
|
1998-01-15 16:08:32 +00:00 |
|
i82595reg.h
|
|
|
|
ics2101reg.h
|
|
|
|
intersil7170.h
|
|
|
|
interwave.c
|
Make probe message more consistent with usual practice.
|
1998-04-20 20:58:05 +00:00 |
|
interwavereg.h
|
|
|
|
interwavevar.h
|
|
|
|
isp.c
|
there is an (unimportant) difference between 1020 && 1020A
|
1998-05-05 22:10:36 +00:00 |
|
ispmbox.h
|
|
|
|
ispreg.h
|
new async code defined
|
1997-12-05 19:40:35 +00:00 |
|
ispvar.h
|
there is an (unimportant) difference between 1020 && 1020A
|
1998-05-05 22:10:36 +00:00 |
|
lemac.c
|
Fix alignment crashes on Alphas...
|
1998-05-14 18:24:00 +00:00 |
|
lemacreg.h
|
|
|
|
lemacvar.h
|
Fix alignment crashes on Alphas...
|
1998-05-14 18:24:00 +00:00 |
|
lpt.c
|
Implement a flag to indicate that the driver attached correctly.
|
1998-02-02 22:54:55 +00:00 |
|
lptreg.h
|
|
|
|
lptvar.h
|
Implement a flag to indicate that the driver attached correctly.
|
1998-02-02 22:54:55 +00:00 |
|
mb86960.c
|
Oops; make the table const.
|
1998-03-29 22:36:42 +00:00 |
|
mb86960reg.h
|
fix typo
|
1998-03-23 16:57:21 +00:00 |
|
mb86960var.h
|
Split Fujitsu MB9696x based ethernet card driver into bus
|
1998-03-22 04:25:36 +00:00 |
|
mc6845reg.h
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
mc146818reg.h
|
|
|
|
midway.c
|
Adjust for config changes.
|
1998-01-12 09:23:08 +00:00 |
|
midwayreg.h
|
|
|
|
midwayvar.h
|
|
|
|
ncr53c9x.c
|
If we have an NCR53CF9x (indicated by the front-end by setting a flag
|
1998-05-26 23:17:34 +00:00 |
|
ncr53c9xreg.h
|
|
|
|
ncr53c9xvar.h
|
If we have an NCR53CF9x (indicated by the front-end by setting a flag
|
1998-05-26 23:17:34 +00:00 |
|
ncr5380.doc
|
RCSID Police.
|
1998-01-05 07:31:05 +00:00 |
|
ncr5380reg.h
|
|
|
|
ncr5380sbc.c
|
Fix typo in a trace message expression.
|
1997-12-12 22:44:26 +00:00 |
|
ncr5380var.h
|
|
|
|
ne2000.c
|
Change "__BUS_SPACE_NEED_STREAM_METHODS" to "__BUS_SPACE_HAS_STREAM_METHODS".
|
1998-02-04 14:13:40 +00:00 |
|
ne2000reg.h
|
|
|
|
ne2000var.h
|
|
|
|
nec765reg.h
|
|
|
|
ns16450reg.h
|
|
|
|
ns16550reg.h
|
|
|
|
opl3sa3.h
|
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
|
1998-05-20 16:19:41 +00:00 |
|
pcdisplay_subr.c
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
pcdisplay.h
|
needed for VGA text attributes
|
1998-05-14 23:11:03 +00:00 |
|
pcdisplayvar.h
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
pdq_ifsubr.c
|
Fix syncing of consumer block.
|
1998-05-27 01:17:53 +00:00 |
|
pdq.c
|
Another bug fix (clear transmit done before trying to queue more transmits).
|
1998-05-28 03:07:49 +00:00 |
|
pdqreg.h
|
Only enable transmit done interrupts when output ring is full.
|
1998-05-27 14:01:02 +00:00 |
|
pdqvar.h
|
Fix syncing of consumer block.
|
1998-05-27 01:17:53 +00:00 |
|
rrunner.c
|
Correct copyright date.
|
1998-05-17 16:46:06 +00:00 |
|
rrunnerreg.h
|
Correct copyright date.
|
1998-05-17 16:46:06 +00:00 |
|
rrunnervar.h
|
Correct copyright date.
|
1998-05-17 16:46:06 +00:00 |
|
smc90cx6.c
|
Adjust for config changes.
|
1998-01-12 09:23:08 +00:00 |
|
smc90cx6reg.h
|
|
|
|
smc91cxx.c
|
Adjust for config changes.
|
1998-01-12 09:23:08 +00:00 |
|
smc91cxxreg.h
|
|
|
|
smc91cxxvar.h
|
|
|
|
smc93cx6.c
|
|
|
|
smc93cx6var.h
|
|
|
|
st16650reg.h
|
|
|
|
tms320av110.c
|
|
|
|
tms320av110reg.h
|
|
|
|
tms320av110var.h
|
|
|
|
uha.c
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-17 03:02:30 +00:00 |
|
uhareg.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-17 03:02:30 +00:00 |
|
uhavar.h
|
- Perform all necessary bus_dmamap_sync() operations.
|
1998-02-17 03:02:30 +00:00 |
|
vga_subr.c
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
vga.c
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
vgareg.h
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
vgavar.h
|
Put definitions and subroutines needed for all PC display adapters
|
1998-05-28 16:48:40 +00:00 |
|
wdc.c
|
In wdcintr(), add a catch-all case so that this will compile if no
|
1998-04-28 18:36:07 +00:00 |
|
wdcreg.h
|
In LBA mode, always use the `total capacity' count, rather than calculating
|
1998-04-26 05:28:23 +00:00 |
|
wdcvar.h
|
Add hooks to make exclusive hardware locking possible. This is necessary
|
1998-04-07 19:51:57 +00:00 |
|
z8530.doc
|
|
|
|
z8530reg.h
|
|
|
|
z8530sc.c
|
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
|
1998-03-22 02:36:02 +00:00 |
|
z8530sc.h
|
Eliminate cs_heldchar. It is not necessary in my version of the driver.
|
1998-03-30 02:41:21 +00:00 |
|
z8530tty.c
|
Eliminate cs_heldchar. It is not necessary in my version of the driver.
|
1998-03-30 02:41:21 +00:00 |
b84dbbb37c