NetBSD/sys/dev/isa/lpt_isa.c

255 lines
7.4 KiB
C

/* $NetBSD: lpt_isa.c,v 1.56 2003/01/20 05:30:06 simonb Exp $ */
/*
* Copyright (c) 1993, 1994 Charles M. Hannum.
* Copyright (c) 1990 William F. Jolitz, TeleMuse
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This software is a component of "386BSD" developed by
* William F. Jolitz, TeleMuse.
* 4. Neither the name of the developer nor the name "386BSD"
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ
* AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS
* SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT.
* THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT
* NOT MAKE USE OF THIS WORK.
*
* FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED
* BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN
* REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES
* (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING
* JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND
* LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE
* ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS
* OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Device Driver for AT parallel printer port
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: lpt_isa.c,v 1.56 2003/01/20 05:30:06 simonb Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <sys/ioctl.h>
#include <sys/uio.h>
#include <sys/device.h>
#include <sys/syslog.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/isa/isavar.h>
#include <dev/ic/lptreg.h>
#include <dev/ic/lptvar.h>
#define LPTPRI (PZERO+8)
#define LPT_BSIZE 1024
#ifndef LPTDEBUG
#define LPRINTF(a)
#else
#define LPRINTF(a) if (lpt_isa_debug) printf a
int lpt_isa_debug = 0;
#endif
struct lpt_isa_softc {
struct lpt_softc sc_lpt;
int sc_irq;
};
int lpt_isa_probe __P((struct device *, struct cfdata *, void *));
void lpt_isa_attach __P((struct device *, struct device *, void *));
CFATTACH_DECL(lpt_isa, sizeof(struct lpt_isa_softc),
lpt_isa_probe, lpt_isa_attach, NULL, NULL);
int lpt_port_test __P((bus_space_tag_t, bus_space_handle_t, bus_addr_t,
bus_size_t, u_char, u_char));
/*
* Internal routine to lptprobe to do port tests of one byte value.
*/
int
lpt_port_test(iot, ioh, base, off, data, mask)
bus_space_tag_t iot;
bus_space_handle_t ioh;
bus_addr_t base;
bus_size_t off;
u_char data, mask;
{
int timeout;
u_char temp;
data &= mask;
bus_space_write_1(iot, ioh, off, data);
timeout = 1000;
do {
delay(10);
temp = bus_space_read_1(iot, ioh, off) & mask;
} while (temp != data && --timeout);
LPRINTF(("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n",
(unsigned)(base + off), (unsigned)data, (unsigned)temp, timeout));
return (temp == data);
}
/*
* Logic:
* 1) You should be able to write to and read back the same value
* to the data port. Do an alternating zeros, alternating ones,
* walking zero, and walking one test to check for stuck bits.
*
* 2) You should be able to write to and read back the same value
* to the control port lower 5 bits, the upper 3 bits are reserved
* per the IBM PC technical reference manauls and different boards
* do different things with them. Do an alternating zeros, alternating
* ones, walking zero, and walking one test to check for stuck bits.
*
* Some printers drag the strobe line down when the are powered off
* so this bit has been masked out of the control port test.
*
* XXX Some printers may not like a fast pulse on init or strobe, I
* don't know at this point, if that becomes a problem these bits
* should be turned off in the mask byte for the control port test.
*
* 3) Set the data and control ports to a value of 0
*/
int
lpt_isa_probe(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot;
bus_space_handle_t ioh;
u_long base;
u_char mask, data;
int i, rv;
#ifdef DEBUG
#define ABORT do {printf("lptprobe: mask %x data %x failed\n", mask, data); \
goto out;} while (0)
#else
#define ABORT goto out
#endif
if (ia->ia_nio < 1)
return (0);
if (ISA_DIRECT_CONFIG(ia))
return (0);
/* Disallow wildcarded i/o address. */
if (ia->ia_io[0].ir_addr == ISACF_PORT_DEFAULT)
return (0);
iot = ia->ia_iot;
base = ia->ia_io[0].ir_addr;
if (bus_space_map(iot, base, LPT_NPORTS, 0, &ioh))
return 0;
rv = 0;
mask = 0xff;
data = 0x55; /* Alternating zeros */
if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask))
ABORT;
data = 0xaa; /* Alternating ones */
if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask))
ABORT;
for (i = 0; i < CHAR_BIT; i++) { /* Walking zero */
data = ~(1 << i);
if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask))
ABORT;
}
for (i = 0; i < CHAR_BIT; i++) { /* Walking one */
data = (1 << i);
if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask))
ABORT;
}
bus_space_write_1(iot, ioh, lpt_data, 0);
bus_space_write_1(iot, ioh, lpt_control, 0);
ia->ia_io[0].ir_size = LPT_NPORTS;
ia->ia_niomem = 0;
ia->ia_ndrq = 0;
rv = 1;
out:
bus_space_unmap(iot, ioh, LPT_NPORTS);
return rv;
}
void
lpt_isa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct lpt_isa_softc *sc = (void *)self;
struct lpt_softc *lsc = &sc->sc_lpt;
struct isa_attach_args *ia = aux;
bus_space_tag_t iot;
bus_space_handle_t ioh;
if (ia->ia_nirq < 1 ||
ia->ia_irq[0].ir_irq == ISACF_IRQ_DEFAULT) {
sc->sc_irq = -1;
printf(": polled\n");
} else {
sc->sc_irq = ia->ia_irq[0].ir_irq;
printf("\n");
}
iot = lsc->sc_iot = ia->ia_iot;
if (bus_space_map(iot, ia->ia_io[0].ir_addr, LPT_NPORTS, 0, &ioh)) {
printf("%s: can't map i/o space\n", self->dv_xname);
return;
}
lsc->sc_ioh = ioh;
lpt_attach_subr(lsc);
if (sc->sc_irq != -1)
lsc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq,
IST_EDGE, IPL_TTY, lptintr, lsc);
}